libata: convert to iomap

Convert libata core layer and LLDs to use iomap.

* managed iomap is used.  Pointer to pcim_iomap_table() is cached at
  host->iomap and used through out LLDs.  This basically replaces
  host->mmio_base.

* if possible, pcim_iomap_regions() is used

Most iomap operation conversions are taken from Jeff Garzik
<jgarzik@pobox.com>'s iomap branch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 40 insertions, 43 deletions

diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 9c48b418ad7..5ce4f593687 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -135,31 +135,31 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
 
 	if (tf->ctl != ap->last_ctl) {
-		writeb(tf->ctl, (void __iomem *) ioaddr->ctl_addr);
+		writeb(tf->ctl, ioaddr->ctl_addr);
 		ap->last_ctl = tf->ctl;
 		ata_wait_idle(ap);
 	}
 	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
 		writew(tf->feature | (((u16)tf->hob_feature) << 8),
-		       (void __iomem *) ioaddr->feature_addr);
+		       ioaddr->feature_addr);
 		writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
-		       (void __iomem *) ioaddr->nsect_addr);
+		       ioaddr->nsect_addr);
 		writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
-		       (void __iomem *) ioaddr->lbal_addr);
+		       ioaddr->lbal_addr);
 		writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
-		       (void __iomem *) ioaddr->lbam_addr);
+		       ioaddr->lbam_addr);
 		writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
-		       (void __iomem *) ioaddr->lbah_addr);
+		       ioaddr->lbah_addr);
 	} else if (is_addr) {
-		writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
-		writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
-		writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
-		writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
-		writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+		writew(tf->feature, ioaddr->feature_addr);
+		writew(tf->nsect, ioaddr->nsect_addr);
+		writew(tf->lbal, ioaddr->lbal_addr);
+		writew(tf->lbam, ioaddr->lbam_addr);
+		writew(tf->lbah, ioaddr->lbah_addr);
 	}
 
 	if (tf->flags & ATA_TFLAG_DEVICE)
-		writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+		writeb(tf->device, ioaddr->device_addr);
 
 	ata_wait_idle(ap);
 }
@@ -171,12 +171,12 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	u16 nsect, lbal, lbam, lbah, feature;
 
 	tf->command = k2_stat_check_status(ap);
-	tf->device = readw((void __iomem *)ioaddr->device_addr);
-	feature = readw((void __iomem *)ioaddr->error_addr);
-	nsect = readw((void __iomem *)ioaddr->nsect_addr);
-	lbal = readw((void __iomem *)ioaddr->lbal_addr);
-	lbam = readw((void __iomem *)ioaddr->lbam_addr);
-	lbah = readw((void __iomem *)ioaddr->lbah_addr);
+	tf->device = readw(ioaddr->device_addr);
+	feature = readw(ioaddr->error_addr);
+	nsect = readw(ioaddr->nsect_addr);
+	lbal = readw(ioaddr->lbal_addr);
+	lbam = readw(ioaddr->lbam_addr);
+	lbah = readw(ioaddr->lbah_addr);
 
 	tf->feature = feature;
 	tf->nsect = nsect;
@@ -349,7 +349,7 @@ static const struct ata_port_operations k2_sata_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_mmio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -361,7 +361,7 @@ static const struct ata_port_operations k2_sata_ops = {
 	.port_start		= ata_port_start,
 };
 
-static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
+static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 {
 	port->cmd_addr		= base + K2_SATA_TF_CMD_OFFSET;
 	port->data_addr		= base + K2_SATA_TF_DATA_OFFSET;
@@ -386,7 +386,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	struct device *dev = &pdev->dev;
 	struct ata_probe_ent *probe_ent;
-	unsigned long base;
 	void __iomem *mmio_base;
 	const struct k2_board_info *board_info =
 			&k2_board_info[ent->driver_data];
@@ -410,12 +409,12 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	if (pci_resource_len(pdev, 5) == 0)
 		return -ENODEV;
 
-	/* Request PCI regions */
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
+	/* Request and iomap PCI regions */
+	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
+	if (rc)
 		return rc;
-	}
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -431,22 +430,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	probe_ent->dev = pci_dev_to_dev(pdev);
 	INIT_LIST_HEAD(&probe_ent->node);
 
-	mmio_base = pcim_iomap(pdev, 5, 0);
-	if (mmio_base == NULL)
-		return -ENOMEM;
-	base = (unsigned long) mmio_base;
-
-	/* Clear a magic bit in SCR1 according to Darwin, those help
-	 * some funky seagate drives (though so far, those were already
-	 * set by the firmware on the machines I had access to)
-	 */
-	writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
-	       mmio_base + K2_SATA_SICR1_OFFSET);
-
-	/* Clear SATA error & interrupts we don't use */
-	writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
-	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
-
 	probe_ent->sht = &k2_sata_sht;
 	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				ATA_FLAG_MMIO | board_info->port_flags;
@@ -454,7 +437,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
 	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->mmio_base = mmio_base;
+	probe_ent->iomap = pcim_iomap_table(pdev);
 
 	/* We don't care much about the PIO/UDMA masks, but the core won't like us
 	 * if we don't fill these
@@ -463,11 +446,25 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	probe_ent->mwdma_mask = 0x7;
 	probe_ent->udma_mask = 0x7f;
 
+	mmio_base = probe_ent->iomap[5];
+
 	/* different controllers have different number of ports - currently 4 or 8 */
 	/* All ports are on the same function. Multi-function device is no
 	 * longer available. This should not be seen in any system. */
 	for (i = 0; i < board_info->n_ports; i++)
-		k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
+		k2_sata_setup_port(&probe_ent->port[i],
+				   mmio_base + i * K2_SATA_PORT_OFFSET);
+
+	/* Clear a magic bit in SCR1 according to Darwin, those help
+	 * some funky seagate drives (though so far, those were already
+	 * set by the firmware on the machines I had access to)
+	 */
+	writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
+	       mmio_base + K2_SATA_SICR1_OFFSET);
+
+	/* Clear SATA error & interrupts we don't use */
+	writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
+	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	pci_set_master(pdev);