diff options
| author | Mark Lord <liml@rtr.ca> | 2008-05-17 13:34:42 -0400 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-05-19 17:28:44 -0400 |
| commit | 51de32d200b21333950abc52ea1e589bc4eecef7 (patch) | |
| tree | 987158ee6317d8db2a8c8873e4417062397fcd44 /drivers/ata/sata_mv.c | |
| parent | c443c5002b24ff5d2f4efcc25a861f0cb835130a (diff) | |
sata_mv: don't blindly enable IRQs
Part one of simplifying/fixing handling of the main_irq_mask register
to resolve unexpected interrupt issues observed in 2.6.26-rc*.
Don't blindly enable port IRQs at host init time.
Instead, enable only the bits that we want,
which in this case is simply the PCI_ERR bit.
The per-port bits can wait until the ports are reset/probed for devices.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/sata_mv.c')
| -rw-r--r-- | drivers/ata/sata_mv.c | 32 |
1 files changed, 6 insertions, 26 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 239ea4778c5..4e7948e2914 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -202,13 +202,6 @@ enum { HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */ HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */ - HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | - PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | - PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | - HC_MAIN_RSVD), - HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE | - HC_MAIN_RSVD_5), - HC_MAIN_MASKED_IRQS_SOC = (PORTS_0_3_COAL_DONE | HC_MAIN_RSVD_SOC), /* SATAHC registers */ HC_CFG_OFS = 0, @@ -3101,25 +3094,12 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) /* and unmask interrupt generation for host regs */ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); - if (IS_GEN_I(hpriv)) - writelfl(~HC_MAIN_MASKED_IRQS_5, - hpriv->main_irq_mask_addr); - else - writelfl(~HC_MAIN_MASKED_IRQS, - hpriv->main_irq_mask_addr); - - VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " - "PCI int cause/mask=0x%08x/0x%08x\n", - readl(hpriv->main_irq_cause_addr), - readl(hpriv->main_irq_mask_addr), - readl(mmio + hpriv->irq_cause_ofs), - readl(mmio + hpriv->irq_mask_ofs)); - } else { - writelfl(~HC_MAIN_MASKED_IRQS_SOC, - hpriv->main_irq_mask_addr); - VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x\n", - readl(hpriv->main_irq_cause_addr), - readl(hpriv->main_irq_mask_addr)); + + /* + * enable only global host interrupts for now. + * The per-port interrupts get done later as ports are set up. + */ + writelfl(PCI_ERR, hpriv->main_irq_mask_addr); } done: return rc; |