gpl-source-mybooklive-010002-update.zipgpl-source-mybooklive-010103-update.zipgpl-source-mybooklive-010002-update.zip

1 files changed, 3053 insertions, 0 deletions

diff --git a/drivers/ata/sata_dwc_pmp.c b/drivers/ata/sata_dwc_pmp.c
new file mode 100755
index 00000000000..c1b0cff6ae6
--- /dev/null
+++ b/drivers/ata/sata_dwc_pmp.c
@@ -0,0 +1,3053 @@
+/*
+ * drivers/ata/sata_dwc.c
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@amcc.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ *          Copyright 2006 Applied Micro Circuits Corporation
+ *          COPYRIGHT (C) 2005  SYNOPSYS, INC.  ALL RIGHTS RESERVED
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/libata.h>
+#include <linux/rtc.h>
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+
+
+#ifdef CONFIG_SATA_DWC_DEBUG
+#define dwc_dev_dbg(dev, format, arg...) \
+	({ if (0) dev_printk(KERN_INFO, dev, format, ##arg); 0; })
+#define dwc_port_dbg(ap, format, arg...) \
+	ata_port_printk(ap, KERN_INFO, format, ##arg)
+#define dwc_link_dbg(link, format, arg...) \
+	ata_link_printk(link, KERN_INFO, format, ##arg)
+#else
+#define dwc_dev_dbg(dev, format, arg...) \
+	({ 0; })
+#define dwc_port_dbg(ap, format, arg...) \
+	({ 0; })
+#define dwc_link_dbg(link, format, arg...) \
+	({ 0; })
+#endif
+
+#ifdef CONFIG_SATA_DWC_VDEBUG
+#define DEBUG_NCQ
+#define dwc_dev_vdbg(dev, format, arg...) \
+	({ if (0) dev_printk(KERN_INFO, dev, format, ##arg); 0; })
+#define dwc_port_vdbg(ap, format, arg...) \
+	ata_port_printk(ap, KERN_INFO, format, ##arg)
+#define dwc_link_vdbg(link, format, arg...) \
+	ata_link_printk(link, KERN_INFO, format, ##arg)
+#else
+#define dwc_dev_vdbg(dev, format, arg...) \
+	({ 0; })
+#define dwc_port_vdbg(ap, format, arg...) \
+	({ 0; })
+#define dwc_link_vdbg(link, format, arg...) \
+	({ 0; })
+#endif
+
+#define dwc_dev_info(dev, format, arg...) \
+	({ if (0) dev_printk(KERN_INFO, dev, format, ##arg); 0; })
+#define dwc_port_info(ap, format, arg...) \
+	ata_port_printk(ap, KERN_INFO, format, ##arg)
+#define dwc_link_info(link, format, arg...) \
+	ata_link_printk(link, KERN_INFO, format, ##arg)
+
+
+
+#define DRV_NAME        "sata-dwc"
+#define DRV_VERSION     "2.0"
+
+/* Port Multiplier discovery Signature */
+#define PSCR_SCONTROL_DET_ENABLE	0x00000001
+#define PSCR_SSTATUS_DET_PRESENT	0x00000001
+#define PSCR_SERROR_DIAG_X		0x04000000
+
+/* Port multiplier port entry in SCONTROL register */
+#define SCONTROL_PMP_MASK		0x000f0000
+#define PMP_TO_SCONTROL(p)		((p << 16) & 0x000f0000)
+#define SCONTROL_TO_PMP(p)		(((p) & 0x000f0000) >> 16)
+
+
+/* SATA DMA driver Globals */
+#if defined(CONFIG_APM82181)
+#define DMA_NUM_CHANS			2
+#else
+#define DMA_NUM_CHANS			1
+#endif
+
+#define DMA_NUM_CHAN_REGS		8
+
+/* SATA DMA Register definitions */
+#if defined(CONFIG_APM82181)
+#define AHB_DMA_BRST_DFLT       64  /* 16 data items burst length */
+#else
+#define AHB_DMA_BRST_DFLT		64	/* 16 data items burst length */
+#endif
+
+#if defined(CONFIG_APM82181)
+   extern void signal_hdd_led(int, int);
+#endif
+struct dmareg {
+	u32 low;		/* Low bits 0-31 */
+	u32 high;		/* High bits 32-63 */
+};
+
+/* DMA Per Channel registers */
+
+struct dma_chan_regs {
+	struct dmareg sar;	/* Source Address */
+	struct dmareg dar;	/* Destination address */
+	struct dmareg llp;	/* Linked List Pointer */
+	struct dmareg ctl;	/* Control */
+	struct dmareg sstat;	/* Source Status not implemented in core */
+	struct dmareg dstat;	/* Destination Status not implemented in core */
+	struct dmareg sstatar;	/* Source Status Address not impl in core */
+	struct dmareg dstatar;	/* Destination Status Address not implemented */
+	struct dmareg cfg;	/* Config */
+	struct dmareg sgr;	/* Source Gather */
+	struct dmareg dsr;	/* Destination Scatter */
+};
+
+/* Generic Interrupt Registers */
+struct dma_interrupt_regs {
+	struct dmareg tfr;	/* Transfer Interrupt */
+	struct dmareg block;	/* Block Interrupt */
+	struct dmareg srctran;	/* Source Transfer Interrupt */
+	struct dmareg dsttran;	/* Dest Transfer Interrupt */
+	struct dmareg error;	/* Error */
+};
+
+struct ahb_dma_regs {
+	struct dma_chan_regs	chan_regs[DMA_NUM_CHAN_REGS];
+	struct dma_interrupt_regs interrupt_raw;	/* Raw Interrupt */
+	struct dma_interrupt_regs interrupt_status;	/* Interrupt Status */
+	struct dma_interrupt_regs interrupt_mask;	/* Interrupt Mask */
+	struct dma_interrupt_regs interrupt_clear;	/* Interrupt Clear */
+	struct dmareg		statusInt;		/* Interrupt combined */
+	struct dmareg		rq_srcreg;		/* Src Trans Req */
+	struct dmareg		rq_dstreg;		/* Dst Trans Req */
+	struct dmareg		rq_sgl_srcreg;		/* Sngl Src Trans Req */
+	struct dmareg		rq_sgl_dstreg;		/* Sngl Dst Trans Req */
+	struct dmareg		rq_lst_srcreg;		/* Last Src Trans Req */
+	struct dmareg		rq_lst_dstreg;		/* Last Dst Trans Req */
+	struct dmareg		dma_cfg;		/* DMA Config */
+	struct dmareg		dma_chan_en;		/* DMA Channel Enable */
+	struct dmareg		dma_id;			/* DMA ID */
+	struct dmareg		dma_test;		/* DMA Test */
+	struct dmareg		res1;			/* reserved */
+	struct dmareg		res2;			/* reserved */
+
+	/* DMA Comp Params
+	 * Param 6 = dma_param[0], Param 5 = dma_param[1],
+	 * Param 4 = dma_param[2] ...
+	 */
+	struct dmareg		dma_params[6];
+};
+
+/* Data structure for linked list item */
+struct lli {
+	u32		sar;		/* Source Address */
+	u32		dar;		/* Destination address */
+	u32		llp;		/* Linked List Pointer */
+	struct dmareg	ctl;		/* Control */
+#if defined(CONFIG_APM82181)
+	u32             dstat;          /* Source status is not supported */
+#else
+	struct dmareg	dstat;		/* Destination Status */
+#endif
+};
+
+#define SATA_DWC_DMAC_LLI_SZ		(sizeof(struct lli))
+#define SATA_DWC_DMAC_LLI_NUM		256
+#define SATA_DWC_DMAC_TWIDTH_BYTES	4
+#define SATA_DWC_DMAC_LLI_TBL_SZ	\
+	(SATA_DWC_DMAC_LLI_SZ * SATA_DWC_DMAC_LLI_NUM)
+#if defined(CONFIG_APM82181)
+#define SATA_DWC_DMAC_CTRL_TSIZE_MAX    \
+        (0x00000800 * SATA_DWC_DMAC_TWIDTH_BYTES)
+#else
+#define SATA_DWC_DMAC_CTRL_TSIZE_MAX	\
+	(0x00000800 * SATA_DWC_DMAC_TWIDTH_BYTES)
+#endif
+/* DMA Register Operation Bits */
+#define DMA_EN              0x00000001		/* Enable AHB DMA */
+#define DMA_CHANNEL(ch)		(0x00000001 << (ch))	/* Select channel */
+#define DMA_ENABLE_CHAN(ch)	((0x00000001 << (ch)) |			\
+				 ((0x000000001 << (ch)) << 8))
+#define DMA_DISABLE_CHAN(ch)	(0x00000000 | ((0x000000001 << (ch)) << 8))
+
+/* Channel Control Register */
+#define DMA_CTL_BLK_TS(size)	((size) & 0x000000FFF)	/* Blk Transfer size */
+#define DMA_CTL_LLP_SRCEN	0x10000000	/* Blk chain enable Src */
+#define DMA_CTL_LLP_DSTEN	0x08000000	/* Blk chain enable Dst */
+/*
+ * This define is used to set block chaining disabled in the control low
+ * register.  It is already in little endian format so it can be &'d dirctly.
+ * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
+ */
+#define DMA_CTL_LLP_DISABLE_LE32 0xffffffe7
+#define DMA_CTL_SMS(num)	((num & 0x3) << 25)	/*Src Master Select*/
+#define DMA_CTL_DMS(num)	((num & 0x3) << 23)	/*Dst Master Select*/
+#define DMA_CTL_TTFC(type)	((type & 0x7) << 20)	/*Type&Flow cntr*/
+#define DMA_CTL_TTFC_P2M_DMAC	0x00000002		/*Per mem,DMAC cntr*/
+#define DMA_CTL_TTFC_M2P_PER	0x00000003		/*Mem per,peri cntr*/
+#define DMA_CTL_SRC_MSIZE(size)	((size & 0x7) << 14)	/*Src Burst Len*/
+#define DMA_CTL_DST_MSIZE(size)	((size & 0x7) << 11)	/*Dst Burst Len*/
+#define DMA_CTL_SINC_INC	0x00000000		/*Src addr incr*/
+#define DMA_CTL_SINC_DEC	0x00000200
+#define DMA_CTL_SINC_NOCHANGE	0x00000400
+#define DMA_CTL_DINC_INC	0x00000000		/*Dst addr incr*/
+#define DMA_CTL_DINC_DEC	0x00000080
+#define DMA_CTL_DINC_NOCHANGE	0x00000100
+#define DMA_CTL_SRC_TRWID(size)	((size & 0x7) << 4)	/*Src Trnsfr Width*/
+#define DMA_CTL_DST_TRWID(size)	((size & 0x7) << 1)	/*Dst Trnsfr Width*/
+#define DMA_CTL_INT_EN		0x00000001		/*Interrupt Enable*/
+
+/* Channel Configuration Register high bits */
+#define DMA_CFG_FCMOD_REQ	0x00000001		/*Flow cntrl req*/
+#define DMA_CFG_PROTCTL		(0x00000003 << 2)	/*Protection cntrl*/
+
+/* Channel Configuration Register low bits */
+#define DMA_CFG_RELD_DST	0x80000000		/*Reload Dst/Src Addr*/
+#define DMA_CFG_RELD_SRC	0x40000000
+#define DMA_CFG_HS_SELSRC	0x00000800		/*SW hndshk Src/Dst*/
+#define DMA_CFG_HS_SELDST	0x00000400
+#define DMA_CFG_FIFOEMPTY       (0x00000001 << 9)	/*FIFO Empty bit*/
+
+/* Assign hardware handshaking interface (x) to dst / sre peripheral */
+#define DMA_CFG_HW_HS_DEST(int_num)	((int_num & 0xF) << 11)
+#define DMA_CFG_HW_HS_SRC(int_num)	((int_num & 0xF) << 7)
+
+/* Channel Linked List Pointer Register */
+#define DMA_LLP_LMS(addr, master)	(((addr) & 0xfffffffc) | (master))
+#define DMA_LLP_AHBMASTER1		0	/* List Master Select */
+#define DMA_LLP_AHBMASTER2		1
+
+#define SATA_DWC_MAX_PORTS	1
+
+#define SATA_DWC_SCR_OFFSET	0x24
+#define SATA_DWC_REG_OFFSET	0x64
+
+/* DWC SATA Registers */
+struct sata_dwc_regs {
+	u32 fptagr;		/* 1st party DMA tag */
+	u32 fpbor;		/* 1st party DMA buffer offset */
+	u32 fptcr;		/* 1st party DMA Xfr count */
+	u32 dmacr;		/* DMA Control */
+	u32 dbtsr;		/* DMA Burst Transac size */
+	u32 intpr;		/* Interrupt Pending */
+	u32 intmr;		/* Interrupt Mask */
+	u32 errmr;		/* Error Mask */
+	u32 llcr;		/* Link Layer Control */
+	u32 phycr;		/* PHY Control */
+	u32 physr;		/* PHY Status */
+	u32 rxbistpd;		/* Recvd BIST pattern def register */
+	u32 rxbistpd1;		/* Recvd BIST data dword1 */
+	u32 rxbistpd2;		/* Recvd BIST pattern data dword2 */
+	u32 txbistpd;		/* Trans BIST pattern def register */
+	u32 txbistpd1;		/* Trans BIST data dword1 */
+	u32 txbistpd2;		/* Trans BIST data dword2 */
+	u32 bistcr;		/* BIST Control Register */
+	u32 bistfctr;		/* BIST FIS Count Register */
+	u32 bistsr;		/* BIST Status Register */
+	u32 bistdecr;		/* BIST Dword Error count register */
+	u32 res[15];		/* Reserved locations */
+	u32 testr;		/* Test Register */
+	u32 versionr;		/* Version Register */
+	u32 idr;		/* ID Register */
+	u32 unimpl[192];	/* Unimplemented */
+	u32 dmadr[256];	/* FIFO Locations in DMA Mode */
+};
+
+#define SCR_SCONTROL_DET_ENABLE		0x00000001
+#define SCR_SSTATUS_DET_PRESENT		0x00000001
+#define SCR_SERROR_DIAG_X		0x04000000
+
+/* DWC SATA Register Operations */
+#define	SATA_DWC_TXFIFO_DEPTH		0x01FF
+#define	SATA_DWC_RXFIFO_DEPTH		0x01FF
+
+#define SATA_DWC_DMACR_TMOD_TXCHEN	0x00000004
+#define	SATA_DWC_DMACR_TXCHEN		(0x00000001 | \
+						SATA_DWC_DMACR_TMOD_TXCHEN)
+#define	SATA_DWC_DMACR_RXCHEN		(0x00000002 | \
+						SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_TX_CLEAR(v)	(((v) & ~SATA_DWC_DMACR_TXCHEN) | \
+						SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_RX_CLEAR(v)	(((v) & ~SATA_DWC_DMACR_RXCHEN) | \
+						SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_TXRXCH_CLEAR	SATA_DWC_DMACR_TMOD_TXCHEN
+
+#define SATA_DWC_DBTSR_MWR(size)	((size/4) & \
+						SATA_DWC_TXFIFO_DEPTH)
+#define SATA_DWC_DBTSR_MRD(size)	(((size/4) & \
+						SATA_DWC_RXFIFO_DEPTH) << 16)
+
+// SATA DWC Interrupts
+#define	SATA_DWC_INTPR_DMAT			0x00000001
+#define SATA_DWC_INTPR_NEWFP		0x00000002
+#define SATA_DWC_INTPR_PMABRT		0x00000004
+#define SATA_DWC_INTPR_ERR			0x00000008
+#define SATA_DWC_INTPR_NEWBIST		0x00000010
+#define SATA_DWC_INTPR_IPF			0x80000000
+// Interrupt masks
+#define	SATA_DWC_INTMR_DMATM		0x00000001
+#define SATA_DWC_INTMR_NEWFPM		0x00000002
+#define SATA_DWC_INTMR_PMABRTM		0x00000004
+#define SATA_DWC_INTMR_ERRM			0x00000008
+#define SATA_DWC_INTMR_NEWBISTM		0x00000010
+#define SATA_DWC_INTMR_PRIMERRM		0x00000020
+#define SATA_DWC_INTPR_CMDGOOD		0x00000080
+#define SATA_DWC_INTPR_CMDABORT		0x00000040
+
+#define SATA_DWC_LLCR_SCRAMEN		0x00000001
+#define SATA_DWC_LLCR_DESCRAMEN		0x00000002
+#define SATA_DWC_LLCR_RPDEN			0x00000004
+
+// Defines for SError register
+#define SATA_DWC_SERR_ERRI      0x00000001 // Recovered data integrity error
+#define SATA_DWC_SERR_ERRM      0x00000002 // Recovered communication error
+#define SATA_DWC_SERR_ERRT      0x00000100 // Non-recovered transient data integrity error
+#define SATA_DWC_SERR_ERRC      0x00000200 // Non-recovered persistent communication or data integrity error
+#define SATA_DWC_SERR_ERRP      0x00000400 // Protocol error
+#define SATA_DWC_SERR_ERRE      0x00000800 // Internal host adapter error
+#define SATA_DWC_SERR_DIAGN     0x00010000 // PHYRdy change
+#define SATA_DWC_SERR_DIAGI     0x00020000 // PHY internal error
+#define SATA_DWC_SERR_DIAGW     0x00040000 // Phy COMWAKE signal is detected
+#define SATA_DWC_SERR_DIAGB     0x00080000 // 10b to 8b decoder err
+#define SATA_DWC_SERR_DIAGT     0x00100000 // Disparity error
+#define SATA_DWC_SERR_DIAGC		0x00200000 // CRC error
+#define SATA_DWC_SERR_DIAGH		0x00400000 // Handshake error
+#define SATA_DWC_SERR_DIAGL		0x00800000 // Link sequence (illegal transition) error
+#define SATA_DWC_SERR_DIAGS		0x01000000 // Transport state transition error
+#define SATA_DWC_SERR_DIAGF		0x02000000 // Unrecognized FIS type
+#define SATA_DWC_SERR_DIAGX		0x04000000 // Exchanged error - Set when PHY COMINIT signal is detected.
+#define SATA_DWC_SERR_DIAGA		0x08000000 // Port Selector Presence detected
+
+/* This is all error bits, zero's are reserved fields. */
+#define SATA_DWC_SERR_ERR_BITS	0x0FFF0F03
+
+#define SATA_DWC_SCR0_SPD_GET(v)	((v >> 4) & 0x0000000F)
+
+struct sata_dwc_device {
+	struct resource reg;            /* Resource for register */
+	struct device		*dev;		/* generic device struct */
+	struct ata_probe_ent	*pe;		/* ptr to probe-ent */
+	struct ata_host		*host;
+	u8			*reg_base;
+	struct sata_dwc_regs	*sata_dwc_regs;	/* DW Synopsys SATA specific */
+	u8     			*scr_base;
+	int    			dma_channel;	/* DWC SATA DMA channel  */
+	int			irq_dma;
+	struct timer_list an_timer;
+};
+
+#define SATA_DWC_QCMD_MAX	32
+
+struct sata_dwc_device_port {
+	struct sata_dwc_device	*hsdev;
+	int			cmd_issued[SATA_DWC_QCMD_MAX];
+	struct lli		*llit[SATA_DWC_QCMD_MAX];
+	dma_addr_t		llit_dma[SATA_DWC_QCMD_MAX];
+	u32			dma_chan[SATA_DWC_QCMD_MAX];
+	int			dma_pending[SATA_DWC_QCMD_MAX];
+	u32 			sata_dwc_sactive_issued;	/* issued queued ops */
+	u32 			sata_dwc_sactive_queued;	/* queued ops */
+	u32 			dma_interrupt_count;
+
+};
+
+static struct sata_dwc_device* dwc_dev_list[2];
+static int dma_intr_registered = 0;
+/*
+ * Commonly used DWC SATA driver Macros
+ */
+#define HSDEV_FROM_HOST(host)	((struct sata_dwc_device *) \
+					(host)->private_data)
+#define HSDEV_FROM_AP(ap)	((struct sata_dwc_device *) \
+					(ap)->host->private_data)
+#define HSDEVP_FROM_AP(ap)	((struct sata_dwc_device_port *) \
+					(ap)->private_data)
+#define HSDEV_FROM_QC(qc)	((struct sata_dwc_device *) \
+					(qc)->ap->host->private_data)
+#define HSDEV_FROM_HSDEVP(p)	((struct sata_dwc_device *) \
+					(hsdevp)->hsdev)
+
+enum {
+	SATA_DWC_CMD_ISSUED_NOT		= 0,
+	SATA_DWC_CMD_ISSUED_PENDING	= 1,
+	SATA_DWC_CMD_ISSUED_EXEC	= 2,
+	SATA_DWC_CMD_ISSUED_NODATA	= 3,
+
+	SATA_DWC_DMA_PENDING_NONE	= 0,
+	SATA_DWC_DMA_PENDING_TX		= 1,
+	SATA_DWC_DMA_PENDING_RX		= 2,
+};
+
+/*
+ * Globals
+ */
+static struct ahb_dma_regs *sata_dma_regs = 0;
+
+/*
+ * Prototypes
+ */
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag);
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+				u32 check_status);
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
+static void sata_dwc_port_stop(struct ata_port *ap);
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
+
+static int dma_dwc_init(struct sata_dwc_device *hsdev);
+static void dma_dwc_exit(struct sata_dwc_device *hsdev);
+static int dma_dwc_xfer_setup(struct ata_queued_cmd *qc,
+			      struct lli *lli, dma_addr_t dma_lli,
+			      void __iomem *addr);
+static void dma_dwc_xfer_start(int dma_ch);
+static void dma_dwc_terminate_dma(struct ata_port *ap, int dma_ch);
+static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev);
+static void sata_dwc_init_port ( struct ata_port *ap );
+u8 sata_dwc_check_status(struct ata_port *ap);
+
+
+
+
+static const char *dir_2_txt(enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_BIDIRECTIONAL:
+		return "bi";
+	case DMA_FROM_DEVICE:
+		return "from";
+	case DMA_TO_DEVICE:
+		return "to";
+	case DMA_NONE:
+		return "none";
+	default:
+		return "err";
+	}
+}
+
+static const char *prot_2_txt(enum ata_tf_protocols protocol)
+{
+	switch (protocol) {
+	case ATA_PROT_UNKNOWN:
+		return "unknown";
+	case ATA_PROT_NODATA:
+		return "nodata";
+	case ATA_PROT_PIO:
+		return "pio";
+	case ATA_PROT_DMA:
+		return "dma";
+	case ATA_PROT_NCQ:
+		return "ncq";
+	case ATAPI_PROT_PIO:
+		return "atapi pio";
+	case ATAPI_PROT_NODATA:
+		return "atapi nodata";
+	case ATAPI_PROT_DMA:
+		return "atapi dma";
+	default:
+		return "err";
+	}
+}
+
+inline const char *ata_cmd_2_txt(const struct ata_taskfile *tf)
+{
+	switch (tf->command) {
+	case ATA_CMD_CHK_POWER:
+		return "ATA_CMD_CHK_POWER";
+	case ATA_CMD_EDD:
+		return "ATA_CMD_EDD";
+	case ATA_CMD_FLUSH:
+		return "ATA_CMD_FLUSH";
+	case ATA_CMD_FLUSH_EXT:
+		return "ATA_CMD_FLUSH_EXT";
+	case ATA_CMD_ID_ATA:
+		return "ATA_CMD_ID_ATA";
+	case ATA_CMD_ID_ATAPI:
+		return "ATA_CMD_ID_ATAPI";
+	case ATA_CMD_FPDMA_READ:
+		return "ATA_CMD_FPDMA_READ";
+	case ATA_CMD_FPDMA_WRITE:
+		return "ATA_CMD_FPDMA_WRITE";
+	case ATA_CMD_READ:
+		return "ATA_CMD_READ";
+	case ATA_CMD_READ_EXT:
+		return "ATA_CMD_READ_EXT";
+	case ATA_CMD_READ_NATIVE_MAX_EXT :
+		return "ATA_CMD_READ_NATIVE_MAX_EXT";
+	case ATA_CMD_VERIFY_EXT :
+		return "ATA_CMD_VERIFY_EXT";
+	case ATA_CMD_WRITE:
+		return "ATA_CMD_WRITE";
+	case ATA_CMD_WRITE_EXT:
+		return "ATA_CMD_WRITE_EXT";
+	case ATA_CMD_PIO_READ:
+		return "ATA_CMD_PIO_READ";
+	case ATA_CMD_PIO_READ_EXT:
+		return "ATA_CMD_PIO_READ_EXT";
+	case ATA_CMD_PIO_WRITE:
+		return "ATA_CMD_PIO_WRITE";
+	case ATA_CMD_PIO_WRITE_EXT:
+		return "ATA_CMD_PIO_WRITE_EXT";
+	case ATA_CMD_SET_FEATURES:
+		return "ATA_CMD_SET_FEATURES";
+	case ATA_CMD_PACKET:
+		return "ATA_CMD_PACKET";
+	case ATA_CMD_PMP_READ:
+		return "ATA_CMD_PMP_READ";
+	case ATA_CMD_PMP_WRITE:
+		return "ATA_CMD_PMP_WRITE";
+	default:
+		return "ATA_CMD_???";
+	}
+}
+
+/* 
+ * Dump content of the taskfile
+ */
+static void sata_dwc_tf_dump(struct device *dwc_dev, struct ata_taskfile *tf)
+{
+	dwc_dev_vdbg(dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags: 0x%lx"
+			"device: %x\n", tf->command, prot_2_txt(tf->protocol),
+			tf->flags, tf->device);
+	dwc_dev_vdbg(dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x lbam:"
+			"0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
+			tf->lbam, tf->lbah);
+	dwc_dev_vdbg(dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x hob_lbal: 0x%x "
+			"hob_lbam: 0x%x hob_lbah: 0x%x\n", tf->hob_feature,
+			tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
+			tf->hob_lbah);
+}
+
+/*
+ * Function: get_burst_length_encode
+ * arguments: datalength: length in bytes of data
+ * returns value to be programmed in register corrresponding to data length
+ * This value is effectively the log(base 2) of the length
+ */
+static inline int get_burst_length_encode(int datalength)
+{
+	int items = datalength >> 2;	/* div by 4 to get lword count */
+
+	if (items >= 64)
+		return 5;
+
+	if (items >= 32)
+		return 4;
+
+	if (items >= 16)
+		return 3;
+
+	if (items >= 8)
+		return 2;
+
+	if (items >= 4)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * Clear Interrupts on a DMA channel
+ */
+static inline void clear_chan_interrupts(int c)
+{
+	out_le32(&(sata_dma_regs->interrupt_clear.tfr.low), DMA_CHANNEL(c));
+	out_le32(&(sata_dma_regs->interrupt_clear.block.low), DMA_CHANNEL(c));
+	out_le32(&(sata_dma_regs->interrupt_clear.srctran.low), DMA_CHANNEL(c));
+	out_le32(&(sata_dma_regs->interrupt_clear.dsttran.low), DMA_CHANNEL(c));
+	out_le32(&(sata_dma_regs->interrupt_clear.error.low), DMA_CHANNEL(c));
+}
+
+/*
+ * Function: dma_request_channel
+ * arguments: None
+ * returns channel number if available else -1
+ * This function assigns the next available DMA channel from the list to the
+ * requester
+ */
+static int dma_request_channel(struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+
+	if (!(in_le32(&(sata_dma_regs->dma_chan_en.low)) & DMA_CHANNEL(hsdev->dma_channel))) {
+		dwc_port_vdbg(ap, "%s Successfully requested DMA channel %d\n", 
+				__func__, hsdev->dma_channel);
+		return (hsdev->dma_channel);
+	}
+	
+	return -1;
+}
+
+
+
+/*
+ * Function: dma_dwc_interrupt
+ * arguments: irq, dev_id, pt_regs
+ * returns channel number if available else -1
+ * Interrupt Handler for DW AHB SATA DMA
+ */
+static int dma_dwc_interrupt(int irq, void *hsdev_instance)
+{
+	volatile u32 tfr_reg, err_reg;
+	unsigned long flags;
+	struct sata_dwc_device *hsdev =
+		(struct sata_dwc_device *)hsdev_instance;
+	struct ata_host *host = (struct ata_host *)hsdev->host;
+	struct ata_port *ap;
+	struct sata_dwc_device_port *hsdevp;
+	u8 tag = 0;
+	int chan;
+	unsigned int port = 0;
+	spin_lock_irqsave(&host->lock, flags);
+
+	ap = host->ports[port];
+	hsdevp = HSDEVP_FROM_AP(ap);
+	tag = ap->link.active_tag;
+
+	dwc_port_vdbg(ap, "%s: DMA interrupt in channel %d\n", __func__, hsdev->dma_channel);
+
+	tfr_reg = in_le32(&(sata_dma_regs->interrupt_status.tfr.low));
+	err_reg = in_le32(&(sata_dma_regs->interrupt_status.error.low));
+
+	dwc_port_vdbg(ap, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
+		tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
+	chan = hsdev->dma_channel;				
+	
+	if (tfr_reg & DMA_CHANNEL(chan)) {
+		/*
+		 *Each DMA command produces 2 interrupts.  Only
+		 * complete the command after both interrupts have been
+		 * seen. (See sata_dwc_isr())
+		 */
+		hsdevp->dma_interrupt_count++;
+		sata_dwc_clear_dmacr(hsdevp, tag);
+
+		if (unlikely(hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE)) {
+			dev_err(ap->dev, "DMA not pending eot=0x%08x "
+				"err=0x%08x tag=0x%02x pending=%d\n",
+				tfr_reg, err_reg, tag,
+				hsdevp->dma_pending[tag]);
+		}
+
+		// Do remain jobs after DMA transfer complete
+		if ((hsdevp->dma_interrupt_count % 2) == 0)
+			sata_dwc_dma_xfer_complete(ap, 1);
+
+		/* Clear the interrupt */
+		out_le32(&(sata_dma_regs->interrupt_clear.tfr.low),
+			  DMA_CHANNEL(chan));
+	}
+
+	/* Process error interrupt. */
+	// We do not expect error happen
+	if (unlikely(err_reg & DMA_CHANNEL(chan))) {
+		/* TODO Need error handler ! */
+		dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
+				err_reg);
+
+		spin_lock_irqsave(ap->lock, flags);
+		//if (ata_is_dma(qc->tf.protocol)) {
+			/* disable DMAC */
+			dma_dwc_terminate_dma(ap, chan);
+		//}
+		spin_unlock_irqrestore(ap->lock, flags);
+
+		/* Clear the interrupt. */
+		out_le32(&(sata_dma_regs->interrupt_clear.error.low),
+			  DMA_CHANNEL(chan));
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_dwc_handler(int irq, void *hsdev_instance)
+{
+	volatile u32 tfr_reg, err_reg;
+	int chan;
+
+	tfr_reg = in_le32(&(sata_dma_regs->interrupt_status.tfr.low));	
+	err_reg = in_le32(&(sata_dma_regs->interrupt_status.error.low));
+
+	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+		/* Check for end-of-transfer interrupt. */
+
+		if (tfr_reg & DMA_CHANNEL(chan)) {
+			dma_dwc_interrupt(0, dwc_dev_list[chan]);		
+		}
+		else
+
+		/* Check for error interrupt. */
+		if (err_reg & DMA_CHANNEL(chan)) {
+			dma_dwc_interrupt(0, dwc_dev_list[chan]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int dma_register_interrupt (struct sata_dwc_device *hsdev)
+{
+	int retval = 0;
+	int irq = hsdev->irq_dma;
+	/* 
+	 * FIXME: 2 SATA controllers share the same DMA engine so
+	 * currently, they also share same DMA interrupt
+	 */
+	if (!dma_intr_registered) {
+		printk("%s register irq (%d)\n", __func__, irq);
+		retval = request_irq(irq, dma_dwc_handler, IRQF_SHARED, "SATA DMA", hsdev);
+		//retval = request_irq(irq, dma_dwc_handler, IRQF_DISABLED, "SATA DMA", NULL);
+		if (retval) {
+			dev_err(hsdev->dev, "%s: could not get IRQ %d\n", __func__, irq);
+			return -ENODEV;
+		}
+		//dma_intr_registered = 1;
+	}
+	return retval;
+}
+
+/*
+ * Function: dma_request_interrupts
+ * arguments: hsdev
+ * returns status
+ * This function registers ISR for a particular DMA channel interrupt
+ */
+static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
+{
+	int retval = 0;
+	int dma_chan = hsdev->dma_channel;
+
+	/* Unmask error interrupt */
+	out_le32(&sata_dma_regs->interrupt_mask.error.low,
+			 in_le32(&sata_dma_regs->interrupt_mask.error.low) | DMA_ENABLE_CHAN(dma_chan));
+
+	/* Unmask end-of-transfer interrupt */
+	out_le32(&sata_dma_regs->interrupt_mask.tfr.low,
+			in_le32(&sata_dma_regs->interrupt_mask.tfr.low) | DMA_ENABLE_CHAN(dma_chan));
+
+	dwc_dev_vdbg(hsdev->dev, "Current value of interrupt_mask.error=0x%0x\n", in_le32(&sata_dma_regs->interrupt_mask.error.low));
+	dwc_dev_vdbg(hsdev->dev, "Current value of interrupt_mask.tfr=0x%0x\n", in_le32(&sata_dma_regs->interrupt_mask.tfr.low));
+#if 0
+	out_le32(&sata_dma_regs->interrupt_mask.block.low,
+			DMA_ENABLE_CHAN(dma_chan));
+
+	out_le32(&sata_dma_regs->interrupt_mask.srctran.low,
+			DMA_ENABLE_CHAN(dma_chan));
+
+	out_le32(&sata_dma_regs->interrupt_mask.dsttran.low,
+			DMA_ENABLE_CHAN(dma_chan));
+#endif
+	return retval;
+}
+
+/*
+ * Function: map_sg_to_lli
+ * arguments: sg: scatter/gather list(sg)
+ *	      num_elems: no of elements in sg list
+ *	      dma_lli: LLI table
+ *	      dest: destination address
+ *	      read: whether the transfer is read or write
+ * returns array of AHB DMA Linked List Items
+ * This function creates a list of LLIs for DMA Xfr and returns the number
+ * of elements in the DMA linked list.
+ *
+ * Note that the Synopsis driver has a comment proposing that better performance
+ * is possible by only enabling interrupts on the last item in the linked list.
+ * However, it seems that could be a problem if an error happened on one of the
+ * first items.  The transfer would halt, but no error interrupt would occur.
+ *
+ * Currently this function sets interrupts enabled for each linked list item:
+ * DMA_CTL_INT_EN.
+ */
+static int map_sg_to_lli(struct ata_queued_cmd *qc, struct lli *lli,
+			 dma_addr_t dma_lli, void __iomem *dmadr_addr)
+{
+	struct scatterlist *sg = qc->sg;
+	struct device *dwc_dev = qc->ap->dev;
+	int num_elems = qc->n_elem;
+	int dir = qc->dma_dir;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(qc->ap);
+	
+	int i, idx = 0;
+	int fis_len = 0;
+	dma_addr_t next_llp;
+	int bl;
+	unsigned int dma_ts = 0;
+
+	dwc_port_vdbg(qc->ap, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x "
+		"dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli,
+		(u32)dmadr_addr);
+
+	bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
+
+	for (i = 0; i < num_elems; i++, sg++) {
+		u32 addr, offset;
+		u32 sg_len, len;
+
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		dwc_port_vdbg(qc->ap, "%s: elem=%d sg_addr=0x%x sg_len=%d\n",
+			__func__, i, addr, sg_len);
+
+		while (sg_len) {
+
+			if (unlikely(idx >= SATA_DWC_DMAC_LLI_NUM)) {
+				/* The LLI table is not large enough. */
+				dev_err(dwc_dev, "LLI table overrun (idx=%d)\n",
+						idx);
+				break;
+			}
+			len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
+				SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
+
+			offset = addr & 0xffff;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			/*
+			 * Make sure a LLI block is not created that will span a
+			 * 8K max FIS boundary.  If the block spans such a FIS
+			 * boundary, there is a chance that a DMA burst will
+			 * cross that boundary -- this results in an error in
+			 * the host controller.
+			 */
+			if (unlikely(fis_len + len > 8192)) {
+				dwc_port_vdbg(qc->ap, "SPLITTING: fis_len=%d(0x%x) "
+					"len=%d(0x%x)\n", fis_len, fis_len,
+					len, len);
+				len = 8192 - fis_len;
+				fis_len = 0;
+			} else {
+				fis_len += len;
+			}
+			if (fis_len == 8192)
+				fis_len = 0;
+
+			/*
+			 * Set DMA addresses and lower half of control register
+			 * based on direction.
+			 */
+			dwc_port_vdbg(qc->ap, "%s: sg_len = %d, len = %d\n", __func__, sg_len, len);
+
+#if defined(CONFIG_APM82181)
+			 if (dir == DMA_FROM_DEVICE) {
+                                lli[idx].dar = cpu_to_le32(addr);
+                                lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
+				if (hsdevp->hsdev->dma_channel == 0) {/* DMA channel 0 */
+		                        lli[idx].ctl.low = cpu_to_le32(
+                                        DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+                                        DMA_CTL_SMS(1) |	/* Source: Master 2 */
+                                        DMA_CTL_DMS(0) |	/* Dest: Master 1 */
+                                        DMA_CTL_SRC_MSIZE(bl) |
+                                        DMA_CTL_DST_MSIZE(bl) |
+                                        DMA_CTL_SINC_NOCHANGE |
+                                        DMA_CTL_SRC_TRWID(2) |
+                                        DMA_CTL_DST_TRWID(2) |
+                                        DMA_CTL_INT_EN |
+                                        DMA_CTL_LLP_SRCEN |
+                                        DMA_CTL_LLP_DSTEN);
+				} else if (hsdevp->hsdev->dma_channel == 1) {/* DMA channel 1 */
+					lli[idx].ctl.low = cpu_to_le32(
+                                        DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+                                        DMA_CTL_SMS(2) |	/* Source: Master 3 */
+                                        DMA_CTL_DMS(0) |	/* Dest: Master 1 */
+                                        DMA_CTL_SRC_MSIZE(bl) |
+                                        DMA_CTL_DST_MSIZE(bl) |
+                                        DMA_CTL_SINC_NOCHANGE |
+                                        DMA_CTL_SRC_TRWID(2) |
+                                        DMA_CTL_DST_TRWID(2) |
+                                        DMA_CTL_INT_EN |
+                                        DMA_CTL_LLP_SRCEN |
+                                        DMA_CTL_LLP_DSTEN);
+				}
+                        } else {        /* DMA_TO_DEVICE */
+                                lli[idx].sar = cpu_to_le32(addr);
+                                lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
+				if (hsdevp->hsdev->dma_channel == 0) {/* DMA channel 0 */
+	                                lli[idx].ctl.low = cpu_to_le32(
+                                        DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+                                        DMA_CTL_SMS(0) |
+                                        DMA_CTL_DMS(1) |
+                                        DMA_CTL_SRC_MSIZE(bl) |
+                                        DMA_CTL_DST_MSIZE(bl) |
+                                        DMA_CTL_DINC_NOCHANGE |
+                                        DMA_CTL_SRC_TRWID(2) |
+                                        DMA_CTL_DST_TRWID(2) |
+                                        DMA_CTL_INT_EN |
+                                        DMA_CTL_LLP_SRCEN |
+                                        DMA_CTL_LLP_DSTEN);
+				} else if (hsdevp->hsdev->dma_channel == 1) {/* DMA channel 1 */
+	                                lli[idx].ctl.low = cpu_to_le32(
+                                        DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+                                        DMA_CTL_SMS(0) |
+                                        DMA_CTL_DMS(2) |
+                                        DMA_CTL_SRC_MSIZE(bl) |
+                                        DMA_CTL_DST_MSIZE(bl) |
+                                        DMA_CTL_DINC_NOCHANGE |
+                                        DMA_CTL_SRC_TRWID(2) |
+                                        DMA_CTL_DST_TRWID(2) |
+                                        DMA_CTL_INT_EN |
+                                        DMA_CTL_LLP_SRCEN |
+                                        DMA_CTL_LLP_DSTEN);
+				}
+                        }
+#else
+			if (dir == DMA_FROM_DEVICE) {
+				lli[idx].dar = cpu_to_le32(addr);
+				lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
+
+				lli[idx].ctl.low = cpu_to_le32(
+					DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+					DMA_CTL_SMS(0) |
+					DMA_CTL_DMS(1) |
+					DMA_CTL_SRC_MSIZE(bl) |
+					DMA_CTL_DST_MSIZE(bl) |
+					DMA_CTL_SINC_NOCHANGE |
+					DMA_CTL_SRC_TRWID(2) |
+					DMA_CTL_DST_TRWID(2) |
+					DMA_CTL_INT_EN |
+					DMA_CTL_LLP_SRCEN |
+					DMA_CTL_LLP_DSTEN);
+			} else {	/* DMA_TO_DEVICE */
+				lli[idx].sar = cpu_to_le32(addr);
+				lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
+
+				lli[idx].ctl.low = cpu_to_le32(
+					DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+					DMA_CTL_SMS(1) |
+					DMA_CTL_DMS(0) |
+					DMA_CTL_SRC_MSIZE(bl) |
+					DMA_CTL_DST_MSIZE(bl) |
+					DMA_CTL_DINC_NOCHANGE |
+					DMA_CTL_SRC_TRWID(2) |
+					DMA_CTL_DST_TRWID(2) |
+					DMA_CTL_INT_EN |
+					DMA_CTL_LLP_SRCEN |
+					DMA_CTL_LLP_DSTEN);
+			}
+#endif
+			dwc_port_vdbg(qc->ap, "%s setting ctl.high len: 0x%08x val: "
+					"0x%08x\n", __func__, len,
+					DMA_CTL_BLK_TS(len / 4));
+
+			/* Program the LLI CTL high register */
+			dma_ts = DMA_CTL_BLK_TS(len / 4);
+			lli[idx].ctl.high = cpu_to_le32(dma_ts);
+
+			/*
+			 *Program the next pointer.  The next pointer must be
+			 * the physical address, not the virtual address.
+			 */
+			next_llp = (dma_lli + ((idx + 1) * sizeof(struct lli)));
+
+			/* The last 2 bits encode the list master select. */
+#if defined(CONFIG_APM82181)
+			next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER1);
+#else
+			next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
+#endif
+
+			lli[idx].llp = cpu_to_le32(next_llp);
+
+			dwc_port_vdbg(qc->ap, "%s: index %d\n", __func__, idx);
+			dwc_port_vdbg(qc->ap, "%s setting ctl.high with val: 0x%08x\n", __func__, lli[idx].ctl.high);
+			dwc_port_vdbg(qc->ap, "%s setting ctl.low with val: 0x%08x\n", __func__, lli[idx].ctl.low);
+			dwc_port_vdbg(qc->ap, "%s setting lli.dar with val: 0x%08x\n", __func__, lli[idx].dar);
+			dwc_port_vdbg(qc->ap, "%s setting lli.sar with val: 0x%08x\n", __func__, lli[idx].sar);
+			dwc_port_vdbg(qc->ap, "%s setting next_llp with val: 0x%08x\n", __func__, lli[idx].llp);
+
+			idx++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	/*
+	 * The last next ptr has to be zero and the last control low register
+	 * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
+	 * and destination enable) set back to 0 (disabled.)  This is what tells
+	 * the core that this is the last item in the linked list.
+	 */
+	if (likely(idx)) {
+		lli[idx-1].llp = 0x00000000;
+		lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+
+		/* Flush cache to memory */
+		dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
+			       DMA_BIDIRECTIONAL);
+	}
+
+	dwc_port_vdbg(qc->ap, "%s: Final index %d\n", __func__, idx-1);
+	dwc_port_vdbg(qc->ap, "%s setting ctl.high with val: 0x%08x\n", __func__, lli[idx-1].ctl.high);
+	dwc_port_vdbg(qc->ap, "%s setting ctl.low with val: 0x%08x\n", __func__, lli[idx-1].ctl.low);
+	dwc_port_vdbg(qc->ap, "%s setting lli.dar with val: 0x%08x\n", __func__, lli[idx-1].dar);
+	dwc_port_vdbg(qc->ap, "%s setting lli.sar with val: 0x%08x\n", __func__, lli[idx-1].sar);
+	dwc_port_vdbg(qc->ap, "%s setting next_llp with val: 0x%08x\n", __func__, lli[idx-1].llp);
+
+	return idx;
+}
+
+/*
+ * Function: dma_dwc_xfer_start
+ * arguments: Channel number
+ * Return : None
+ * Enables the DMA channel
+ */
+static void dma_dwc_xfer_start(int dma_ch)
+{
+	/* Enable the DMA channel */
+	out_le32(&(sata_dma_regs->dma_chan_en.low),
+		 in_le32(&(sata_dma_regs->dma_chan_en.low)) |
+		 DMA_ENABLE_CHAN(dma_ch));
+
+#if defined(CONFIG_SATA_DWC_VDEBUG)
+	printk("DMA CFG = 0x%08x\n", in_le32(&(sata_dma_regs->dma_cfg.low)));
+	printk("%s: setting sata_dma_regs->dma_chan_en.low with val: 0x%08x\n",
+                __func__, in_le32(&(sata_dma_regs->dma_chan_en.low)));
+#endif
+
+  
+#if defined(CONFIG_APM82181)
+       signal_hdd_led(1 /*blink=yes*/, 2 /* _3G_LED_GREEN */);
+#endif
+
+}
+
+/*
+ * Check if the selected DMA channel is currently enabled.
+ */
+static int dma_dwc_channel_enabled(int ch)
+{
+	u32 dma_chan;
+
+	// Read the DMA channel register
+	dma_chan = in_le32(&(sata_dma_regs->dma_chan_en.low));
+	if (dma_chan & DMA_CHANNEL(ch))
+		return 1;
+
+	return 0;
+}
+
+/*
+ * Terminate the current DMA transaction
+ */
+static void dma_dwc_terminate_dma(struct ata_port *ap, int dma_ch)
+{
+	int enabled = dma_dwc_channel_enabled(dma_ch);
+
+	dev_info(ap->dev, "%s terminate DMA on channel=%d enabled=%d\n",
+		 __func__, dma_ch, enabled);
+
+	if (enabled)  {
+		// Disable the selected channel
+		out_le32(&(sata_dma_regs->dma_chan_en.low),
+			 in_le32(&(sata_dma_regs->dma_chan_en.low)) | DMA_DISABLE_CHAN(dma_ch));
+
+		// Wait for the channel is disabled
+		do {
+			enabled = dma_dwc_channel_enabled(dma_ch);
+			msleep(10);
+		} while (enabled);
+	}
+}
+
+
+/*
+ * Setup data and DMA configuration ready for DMA transfer
+ */
+static int dma_dwc_xfer_setup(struct ata_queued_cmd *qc,
+			      struct lli *lli, dma_addr_t dma_lli,
+			      void __iomem *addr)
+{
+	int dma_ch;
+	int num_lli;
+
+	/* Acquire DMA channel */
+	dma_ch = dma_request_channel(qc->ap);
+	if (unlikely(dma_ch == -1)) {
+		dev_err(qc->ap->dev, "%s: dma channel unavailable\n", __func__);
+		return -EAGAIN;
+	}
+	dwc_port_vdbg(qc->ap, "%s: Got channel %d\n", __func__, dma_ch);
+
+	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
+	num_lli = map_sg_to_lli(qc, lli, dma_lli, addr);
+
+	dwc_port_vdbg(qc->ap, "%s sg: 0x%p, count: %d lli: %p dma_lli: 0x%0xlx addr:"
+		" %p lli count: %d\n", __func__, qc->sg, qc->n_elem, lli,
+		(u32)dma_lli, addr, num_lli);
+
+	/* Clear channel interrupts */
+	clear_chan_interrupts(dma_ch);
+	
+	/* Program the CFG register. */
+#if defined(CONFIG_APM82181)
+	if (dma_ch == 0) {
+		/* Buffer mode enabled, FIFO_MODE=0 */
+		out_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.high), 0x000000d);
+		/* Channel 0 bit[7:5] */
+		out_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.low), 0x00000020);
+	} else if (dma_ch == 1) {
+		/* Buffer mode enabled, FIFO_MODE=0 */
+		out_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.high), 0x0000088d);
+		/* Channel 1 bit[7:5] */
+		out_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.low), 0x00000020);
+	}
+#else
+	out_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.high),
+		 DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
+	out_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.low), 0);
+#endif
+
+	/* Program the address of the linked list */
+#if defined(CONFIG_APM82181)
+	out_le32(&(sata_dma_regs->chan_regs[dma_ch].llp.low),
+                 DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER1));
+#else
+	out_le32(&(sata_dma_regs->chan_regs[dma_ch].llp.low),
+		 DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
+#endif
+
+	/* Program the CTL register with src enable / dst enable */
+	//out_le32(&(sata_dma_regs->chan_regs[dma_ch].ctl.low),
+	//	 DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
+	out_le32(&(sata_dma_regs->chan_regs[dma_ch].ctl.low), 0x18000000);
+
+	dwc_port_vdbg(qc->ap, "%s DMA channel %d is ready\n", __func__, dma_ch);
+	dwc_port_vdbg(qc->ap, "%s setting cfg.high of channel %d with val: 0x%08x\n", __func__, dma_ch, in_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.high)));
+	dwc_port_vdbg(qc->ap, "%s setting cfg.low of channel %d with val: 0x%08x\n", __func__, dma_ch, in_le32(&(sata_dma_regs->chan_regs[dma_ch].cfg.low)));
+	dwc_port_vdbg(qc->ap, "%s setting llp.low of channel %d with val: 0x%08x\n", __func__, dma_ch, in_le32(&(sata_dma_regs->chan_regs[dma_ch].llp.low)));
+	dwc_port_vdbg(qc->ap, "%s setting ctl.low of channel %d with val: 0x%08x\n", __func__, dma_ch, in_le32(&(sata_dma_regs->chan_regs[dma_ch].ctl.low)));
+
+	return dma_ch;
+}
+
+/*
+ * Function: dma_dwc_exit
+ * arguments: None
+ * returns status
+ * This function exits the SATA DMA driver
+ */
+static void dma_dwc_exit(struct sata_dwc_device *hsdev)
+{
+	dwc_dev_vdbg(hsdev->dev, "%s:\n", __func__);
+	if (sata_dma_regs)
+		iounmap(sata_dma_regs);
+
+	if (hsdev->irq_dma)
+		free_irq(hsdev->irq_dma, hsdev);
+}
+
+/*
+ * Function: dma_dwc_init
+ * arguments: hsdev
+ * returns status
+ * This function initializes the SATA DMA driver
+ */
+static int dma_dwc_init(struct sata_dwc_device *hsdev)
+{
+	int err;
+	int irq = hsdev->irq_dma;
+
+	err = dma_request_interrupts(hsdev, irq);
+	if (err) {
+		dev_err(hsdev->dev, "%s: dma_request_interrupts returns %d\n",
+			__func__, err);
+		goto error_out;
+	}
+
+	/* Enabe DMA */
+	out_le32(&(sata_dma_regs->dma_cfg.low), DMA_EN);
+
+	dev_notice(hsdev->dev, "DMA initialized\n");
+	dev_notice(hsdev->dev, "DMA CFG = 0x%08x\n", in_le32(&(sata_dma_regs->dma_cfg.low)));
+	dwc_dev_vdbg(hsdev->dev, "SATA DMA registers=0x%p\n", sata_dma_regs);
+
+	return 0;
+
+error_out:
+	dma_dwc_exit(hsdev);
+
+	return err;
+}
+
+
+static void sata_dwc_dev_config(struct ata_device *adev)
+{
+	/*
+	 * Does not support NCQ over a port multiplier
+	 *  (no FIS-based switching).
+	 */
+	if (adev->flags & ATA_DFLAG_NCQ) {
+		/*
+		 * TODO: debug why enabling NCQ makes the linux crashed 
+		 * in hot plug after the first hot unplug action.
+		 * --> need to investigate more
+		 */
+		adev->flags &= ~ATA_DFLAG_NCQ;
+		if (sata_pmp_attached(adev->link->ap)) {
+			adev->flags &= ~ATA_DFLAG_NCQ;
+			ata_dev_printk(adev, KERN_INFO,
+				"NCQ disabled for command-based switching\n");
+		}
+	}
+
+	/*
+	 * Since the sata_pmp_error_handler function in libata-pmp 
+	 * make FLAG_AN disabled in the first time SATA port is configured.
+	 * Asynchronous notification is not configured.
+	 * This will enable the AN feature manually.
+	 */
+	adev->flags |= ATA_DFLAG_AN;
+}
+
+
+static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+	if (unlikely(scr > SCR_NOTIFICATION)) {
+		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+				__func__, scr);
+		return -EINVAL;
+	}
+
+	*val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4));
+	dwc_dev_vdbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+		__func__, link->ap->print_id, scr, *val);
+
+	return 0;
+}
+
+static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+	dwc_dev_vdbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+		__func__, link->ap->print_id, scr, val);
+	if (unlikely(scr > SCR_NOTIFICATION)) {
+		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+				__func__, scr);
+		return -EINVAL;
+	}
+	out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val);
+
+	return 0;
+}
+
+static inline u32 sata_dwc_core_scr_read ( struct ata_port *ap, unsigned int scr)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	return in_le32((void __iomem *)hsdev->scr_base + (scr * 4));
+}
+
+
+static inline void sata_dwc_core_scr_write ( struct ata_port *ap, unsigned int scr, u32 val)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	out_le32((void __iomem *)hsdev->scr_base + (scr * 4), val);
+}
+
+static inline void clear_serror(struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	out_le32( (void __iomem *)hsdev->scr_base + 4,
+		in_le32((void __iomem *)hsdev->scr_base + 4));
+}
+
+static inline void clear_intpr(struct sata_dwc_device *hsdev)
+{
+	out_le32(&hsdev->sata_dwc_regs->intpr,
+		 in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+static inline void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
+{
+	out_le32(&hsdev->sata_dwc_regs->intpr, bit);
+		// in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+
+static inline void enable_err_irq(struct sata_dwc_device *hsdev)
+{
+	out_le32(&hsdev->sata_dwc_regs->intmr,
+		 in_le32(&hsdev->sata_dwc_regs->intmr) | SATA_DWC_INTMR_ERRM);
+	out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERR_ERR_BITS);
+}
+
+static inline u32 qcmd_tag_to_mask(u8 tag)
+{
+	return 0x00000001 << (tag & 0x1f);
+}
+
+
+/*
+ * Timer to monitor SCR_NOTIFICATION registers on the 
+ * SATA port
+ */
+static void sata_dwc_an_chk(unsigned long arg)
+{
+	struct ata_port *ap = (void *)arg;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	unsigned long flags;
+	int rc = 0x0;
+	u32 sntf = 0x0;
+
+	spin_lock_irqsave(ap->lock, flags);
+	rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
+
+	// If some changes on the SCR4, call asynchronous notification
+	if ( (rc == 0) & (sntf  != 0)) {
+		dwc_port_dbg(ap, "Call assynchronous notification sntf=0x%08x\n", sntf);
+		sata_async_notification(ap);
+		hsdev->an_timer.expires = jiffies + msecs_to_jiffies(8000);
+	} else {
+		hsdev->an_timer.expires = jiffies + msecs_to_jiffies(3000);
+	}
+	add_timer(&hsdev->an_timer);
+	spin_unlock_irqrestore(ap->lock, flags);
+}
+
+
+/*
+ *   sata_dwc_pmp_select - Set the PMP field in SControl to the specified port number.
+ *
+ *   @port: The value (port number) to set the PMP field to.
+ *
+ *   @return: The old value of the PMP field.
+ */
+static u32 sata_dwc_pmp_select(struct ata_port *ap, u32 port)
+{
+	u32 scontrol, old_port;
+	if (sata_pmp_supported(ap)) {
+		scontrol = sata_dwc_core_scr_read(ap, SCR_CONTROL);
+		old_port = SCONTROL_TO_PMP(scontrol);
+
+		// Select new PMP port
+		if ( port != old_port )  {
+			scontrol &= ~SCONTROL_PMP_MASK;
+			sata_dwc_core_scr_write(ap, SCR_CONTROL, scontrol | PMP_TO_SCONTROL(port));
+			dwc_port_dbg(ap, "%s: old port=%d new port=%d\n", __func__, old_port, port);
+		}
+		return old_port;
+	} 
+	else
+		return port;
+}
+
+/*
+ * Get the current PMP port
+ */
+static inline u32 current_pmp(struct ata_port *ap)
+{
+	return SCONTROL_TO_PMP(sata_dwc_core_scr_read(ap, SCR_CONTROL));
+}
+
+
+/* 
+ * Process when a PMP card is attached in the SATA port.
+ * Since our SATA port support command base switching only,
+ * NCQ will not be available.
+ * We disable the NCQ feature in SATA port.
+ */
+static void sata_dwc_pmp_attach ( struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+
+	dev_info(ap->dev, "Attach SATA port multiplier with %d ports\n", ap->nr_pmp_links);
+	// Disable NCQ
+	ap->flags &= ~ATA_FLAG_NCQ;
+
+	// Initialize timer for checking AN
+	init_timer(&hsdev->an_timer);
+	hsdev->an_timer.expires = jiffies + msecs_to_jiffies(20000);
+	hsdev->an_timer.function = sata_dwc_an_chk;
+	hsdev->an_timer.data = (unsigned long)(ap);
+	add_timer(&hsdev->an_timer);
+}
+
+/*
+ * Process when PMP card is removed from the SATA port.
+ * Re-enable NCQ for using by the SATA drive in the future
+ */
+static void sata_dwc_pmp_detach ( struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+
+	dev_info(ap->dev, "Detach SATA port\n");
+	// Re-enable NCQ
+	// TODO: remove the below comment out when NCQ problem fixed
+	//ap->flags |= ATA_FLAG_NCQ;
+
+	sata_dwc_pmp_select(ap, 0);
+
+	// Delete timer since PMP card is detached
+	del_timer(&hsdev->an_timer);
+}
+
+
+
+// Check the link to be ready
+int sata_dwc_check_ready ( struct ata_link *link ) {
+	u8 status;
+	struct ata_port *ap = link->ap;
+	status = ioread8(ap->ioaddr.status_addr);
+	return ata_check_ready(status);
+}
+
+
+/*
+ * Do soft reset on the current SATA link.
+ */
+static int sata_dwc_softreset(struct ata_link *link, unsigned int *classes,
+				unsigned long deadline)
+{
+	int rc;
+	struct ata_port *ap = link->ap;
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct ata_taskfile tf;
+
+	sata_dwc_pmp_select(link->ap, sata_srst_pmp(link));
+
+	/* Issue bus reset */
+	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	udelay(20);	/* FIXME: flush */
+	iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+	udelay(20);	/* FIXME: flush */
+	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	ap->last_ctl = ap->ctl;
+
+	/* Always check readiness of the master device */
+	rc = ata_wait_after_reset(link, deadline, sata_dwc_check_ready);
+
+	// Classify the ata_port
+	*classes = ATA_DEV_NONE;
+	/* Verify if SStatus indicates device presence */
+	if (ata_link_online(link)) {
+		memset(&tf, 0, sizeof(tf));
+		ata_sff_tf_read(ap, &tf);
+		*classes = ata_dev_classify(&tf);
+	}
+
+	if ( *classes == ATA_DEV_PMP)
+		dwc_link_dbg(link, "-->found PMP device by sig\n");
+
+	clear_serror(link->ap);
+
+	return rc;
+}
+
+
+
+
+/*
+ * sata_dwc_hardreset - Do hardreset the SATA controller
+ */
+static int sata_dwc_hardreset(struct ata_link *link, unsigned int *classes,
+			   unsigned long deadline)
+{
+	int rc;
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	bool online;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap);
+
+	dwc_link_dbg(link, "%s\n", __func__);
+	sata_dwc_pmp_select(link->ap, sata_srst_pmp(link));
+	dwc_port_vdbg(link->ap, "dmacr=0x%08x\n",in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+
+	// Call standard hard reset
+	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
+
+	// Reconfigure the port after hard reset
+	if ( ata_link_online(link) )
+		sata_dwc_init_port(link->ap);
+
+	return online ? -EAGAIN : rc;
+}
+
+/*
+ * Do hard reset on each PMP link
+ */
+static int sata_dwc_pmp_hardreset(struct ata_link *link, unsigned int *classes,
+			   unsigned long deadline)
+{
+	int rc = 0;
+	sata_dwc_pmp_select(link->ap, sata_srst_pmp(link));
+	rc = sata_std_hardreset(link, classes, deadline);
+	return rc;
+}
+
+/* See ahci.c */
+/*
+ * Process error when the SATAn_INTPR's ERR bit is set
+ * The processing is based on SCR_ERROR register content
+ */
+static void sata_dwc_error_intr(struct ata_port *ap,
+				struct sata_dwc_device *hsdev, uint intpr)
+{
+	struct ata_eh_info *ehi;
+	struct ata_link *link;
+	struct ata_queued_cmd *active_qc = NULL;
+	u32 serror;
+	bool freeze = false, abort = false;
+	int pmp, ret;
+	unsigned int err_mask = 0, action = 0;
+#if defined(CONFIG_SATA_DWC_VDEBUG)
+	int dma_chan = hsdev->dma_channel;
+#endif
+
+	link = &ap->link;
+	ehi = &link->eh_info;
+
+	/* Record irq stat */
+	ata_ehi_clear_desc(ehi);
+	ata_ehi_push_desc(ehi, "irq_stat 0x%08x", intpr);
+
+	// Record SERROR
+	serror = sata_dwc_core_scr_read(ap, SCR_ERROR);
+	dwc_port_dbg(ap, "%s serror = 0x%08x\n", __func__, serror);
+
+	// Clear SERROR and interrupt bit
+	clear_serror(ap);
+	clear_intpr(hsdev);
+
+	// Print out for test only
+	if ( serror ) {
+		dwc_port_info(ap, "Detect errors:");
+		if ( serror & SATA_DWC_SERR_ERRI )
+			printk(" ERRI");
+		if ( serror & SATA_DWC_SERR_ERRM )
+			printk(" ERRM");
+		if ( serror & SATA_DWC_SERR_ERRT )
+			printk(" ERRT");
+		if ( serror & SATA_DWC_SERR_ERRC )
+			printk(" ERRC");
+		if ( serror & SATA_DWC_SERR_ERRP )
+			printk(" ERRP");
+		if ( serror & SATA_DWC_SERR_ERRE )
+			printk(" ERRE");
+		if ( serror & SATA_DWC_SERR_DIAGN )
+			printk(" DIAGN");
+		if ( serror & SATA_DWC_SERR_DIAGI )
+			printk(" DIAGI");
+		if ( serror & SATA_DWC_SERR_DIAGW )
+			printk(" DIAGW");
+		if ( serror & SATA_DWC_SERR_DIAGB )
+			printk(" DIAGB");
+		if ( serror & SATA_DWC_SERR_DIAGT )
+			printk(" DIAGT");
+		if ( serror & SATA_DWC_SERR_DIAGC )
+			printk(" DIAGC");
+		if ( serror & SATA_DWC_SERR_DIAGH )
+			printk(" DIAGH");
+		if ( serror & SATA_DWC_SERR_DIAGL )
+			printk(" DIAGL");
+		if ( serror & SATA_DWC_SERR_DIAGS )
+			printk(" DIAGS");
+		if ( serror & SATA_DWC_SERR_DIAGF )
+			printk(" DIAGF");
+		if ( serror & SATA_DWC_SERR_DIAGX )
+			printk(" DIAGX");
+		if ( serror & SATA_DWC_SERR_DIAGA )
+			printk(" DIAGA");
+		printk("\n");
+	}
+
+#if defined(CONFIG_SATA_DWC_VDEBUG)
+        printk("%s reading cfg.high of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].cfg.high)));
+        printk("%s reading cfg.low of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].cfg.low)));
+        printk("%s reading llp.low of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].llp.low)));
+        printk("%s reading ctl.low of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].ctl.low)));
+        printk("%s reading sar.low of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].sar.low)));
+        printk("%s reading sar.high of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].sar.high)));
+        printk("%s reading dar.low of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].dar.low)));
+        printk("%s reading dar.high of channel %d with val: 0x%08x\n", __func__, dma_chan, in_le32(&(sata_dma_regs->chan_regs[dma_chan].dar.high)));
+#endif
+
+	// Process hotplug for SATA port
+	if ( serror & (SATA_DWC_SERR_DIAGX | SATA_DWC_SERR_DIAGW)) {
+		dwc_port_info(ap, "Detect hot plug signal\n");
+		ata_ehi_hotplugged(ehi);
+		ata_ehi_push_desc(ehi, serror & SATA_DWC_SERR_DIAGN ? "PHY RDY changed" : "device exchanged");
+		freeze = true;
+	}
+
+	// Process PHY internal error / Link sequence (illegal transition) error
+	if ( serror & (SATA_DWC_SERR_DIAGI | SATA_DWC_SERR_DIAGL)) {
+		ehi->err_mask |= AC_ERR_HSM;
+		ehi->action |= ATA_EH_RESET;
+		freeze = true;
+	}
+
+	// Process Internal host adapter error
+	if ( serror & SATA_DWC_SERR_ERRE ) {
+		dev_err(ap->dev, "Detect Internal host adapter error\n");
+		// --> need to review
+		ehi->err_mask |= AC_ERR_HOST_BUS;
+		ehi->action |= ATA_EH_RESET;
+		freeze = true;
+	}
+
+	// Process Protocol Error
+	if ( serror & SATA_DWC_SERR_ERRP ) {
+		dev_err(ap->dev, "Detect Protocol error\n");
+		ehi->err_mask |= AC_ERR_HSM;
+		ehi->action |= ATA_EH_RESET;
+		freeze = true;
+	}
+
+	// Process non-recovered persistent communication error
+	if ( serror & SATA_DWC_SERR_ERRC ) {
+		dev_err(ap->dev, "Detect non-recovered persistent communication error\n");
+		// --> TODO: review processing error
+		ehi->err_mask |= AC_ERR_ATA_BUS;
+		ehi->action |= ATA_EH_SOFTRESET;
+		//ehi->flags |= ATA_EHI_NO_AUTOPSY;
+		//freeze = true;
+	}
+
+	// Non-recovered transient data integrity error
+	if ( serror & SATA_DWC_SERR_ERRT ) {
+		dev_err(ap->dev, "Detect non-recovered transient data integrity error\n");
+		ehi->err_mask |= AC_ERR_ATA_BUS;
+		//ehi->err_mask |= AC_ERR_DEV;
+		ehi->action |= ATA_EH_SOFTRESET;
+		//ehi->flags |= ATA_EHI_NO_AUTOPSY;
+	}
+
+	// Since below errors have been recovered by hardware
+	// they don't need any error processing.
+	if ( serror & SATA_DWC_SERR_ERRM ) {
+		dev_warn(ap->dev, "Detect recovered communication error");
+	}
+	if ( serror & SATA_DWC_SERR_ERRI ) {
+		dev_warn(ap->dev, "Detect recovered data integrity error");
+	}
+
+	// If any error occur, process the qc
+	if (serror & (SATA_DWC_SERR_ERRT | SATA_DWC_SERR_ERRC)) {
+	//if (serror & 0x03f60f0) {
+		abort = true;
+		/* find out the offending link and qc */
+		if (sata_pmp_attached(ap)) {
+			pmp = current_pmp(ap);
+			// If we are working on the PMP port
+			if ( pmp < ap->nr_pmp_links ) {
+				link = &ap->pmp_link[pmp];
+				ehi = &link->eh_info;
+				active_qc = ata_qc_from_tag(ap, link->active_tag);
+				err_mask |= AC_ERR_DEV;
+				ata_ehi_clear_desc(ehi);
+				ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
+			} else {
+				err_mask |= AC_ERR_HSM;
+				action |= ATA_EH_RESET;
+				freeze = true;
+			}
+		
+		}
+		// Work on SATA port
+		else {
+			freeze = true;
+			active_qc = ata_qc_from_tag(ap, link->active_tag);
+		}
+
+		if ( active_qc) {
+			active_qc->err_mask |= err_mask;
+		} else {
+			ehi->err_mask = err_mask;
+		}
+	}
+
+	if ( freeze | abort ) {
+		//sata_dwc_qc_complete(ap, active_qc, 1);
+		// Terminate DMA channel if it is currenly in use
+		if ( dma_request_channel(ap) != -1 ) {
+			dwc_port_dbg(ap, "Terminate DMA channel %d for handling error\n", hsdev->dma_channel);
+			dma_dwc_terminate_dma(ap, hsdev->dma_channel);
+		}
+	}
+
+	if (freeze) {
+		ret = ata_port_freeze(ap);
+		ata_port_printk(ap, KERN_INFO, "Freeze port with %d QCs aborted\n", ret);
+	}
+	else if (abort) {
+		if (active_qc) {
+			ret = ata_link_abort(active_qc->dev->link);
+			ata_link_printk(link, KERN_INFO, "Abort %d QCs\n", ret);
+		} else {
+			ret = ata_port_abort(ap);
+			ata_port_printk(ap, KERN_INFO, "Abort %d QCs on the SATA port\n", ret);
+		}
+	}
+}
+
+
+/*
+ * Function : sata_dwc_isr
+ * arguments : irq, void *dev_instance, struct pt_regs *regs
+ * Return value : irqreturn_t - status of IRQ
+ * This Interrupt handler called via port ops registered function.
+ * .irq_handler = sata_dwc_isr
+ */
+static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+{
+	struct ata_host *host = (struct ata_host *)dev_instance;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host);
+	struct ata_port *ap;
+	struct ata_queued_cmd *qc;
+	unsigned long flags;
+	u8 status, tag;
+	int handled, num_processed, port = 0;
+	u32 intpr, sactive, sactive2, tag_mask;
+	struct sata_dwc_device_port *hsdevp;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Read the interrupt register */
+	intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
+
+	ap = host->ports[port];
+	hsdevp = HSDEVP_FROM_AP(ap);
+
+	dwc_port_dbg(ap,"%s\n",__func__);
+	if ( intpr != 0x80000080)
+		dwc_port_dbg(ap, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr, ap->link.active_tag);
+	//dwc_port_dbg(ap, "%s: INTMR=0x%08x, ERRMR=0x%08x\n", __func__, in_le32(&hsdev->sata_dwc_regs->intmr), in_le32(&hsdev->sata_dwc_regs->errmr));
+
+	/* Check for error interrupt */
+	if (intpr & SATA_DWC_INTPR_ERR) {
+		sata_dwc_error_intr(ap, hsdev, intpr);
+		handled = 1;
+                signal_hdd_led(0 /*off blink*/, 1 /*red color*/);
+		goto done_irqrestore;
+	}
+
+	/* Check for DMA SETUP FIS (FP DMA) interrupt */
+	if (intpr & SATA_DWC_INTPR_NEWFP) {
+		dwc_port_dbg(ap, "%s: NEWFP INTERRUPT in HSDEV with DMA channel %d\n", __func__, hsdev->dma_channel);
+		clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
+
+		tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
+		dwc_dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
+		if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PENDING)
+			dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
+
+		hsdevp->sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
+
+		qc = ata_qc_from_tag(ap, tag);
+		/*
+		 * Start FP DMA for NCQ command.  At this point the tag is the
+		 * active tag.  It is the tag that matches the command about to
+		 * be completed.
+		 */
+		qc->ap->link.active_tag = tag;
+		sata_dwc_bmdma_start_by_tag(qc, tag);
+		qc->ap->hsm_task_state = HSM_ST_LAST;
+
+		handled = 1;
+		goto done_irqrestore;
+	}
+
+	sactive = sata_dwc_core_scr_read(ap, SCR_ACTIVE);
+	tag_mask = (hsdevp->sata_dwc_sactive_issued | sactive) ^ sactive;
+
+	/* If no sactive issued and tag_mask is zero then this is not NCQ */
+	if (hsdevp->sata_dwc_sactive_issued == 0 && tag_mask == 0) {
+		if (ap->link.active_tag == ATA_TAG_POISON)
+			tag = 0;
+		else
+			tag = ap->link.active_tag;
+		qc = ata_qc_from_tag(ap, tag);
+
+		/* DEV interrupt w/ no active qc? */
+		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+			dev_err(ap->dev, "%s intr with no active qc qc=%p\n",
+				__func__, qc);
+			ap->ops->sff_check_status(ap);
+			handled = 1;
+			goto done_irqrestore;
+		}
+
+		status = ap->ops->sff_check_status(ap);
+
+		qc->ap->link.active_tag = tag;
+		hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+		if (status & ATA_ERR) {
+			dwc_dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status);
+			sata_dwc_qc_complete(ap, qc, 1);
+			handled = 1;
+			goto done_irqrestore;
+		}
+
+		dwc_dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
+			__func__, prot_2_txt(qc->tf.protocol));
+drv_still_busy:
+		if (ata_is_dma(qc->tf.protocol)) {
+			int dma_flag = hsdevp->dma_pending[tag];
+			/*
+			 * Each DMA transaction produces 2 interrupts.  The DMAC
+			 * transfer complete interrupt and the SATA controller
+			 * operation done interrupt. The command should be
+			 * completed only after both interrupts are seen.
+			 */
+			hsdevp->dma_interrupt_count++;
+			if (unlikely(dma_flag == SATA_DWC_DMA_PENDING_NONE)) {
+				dev_err(ap->dev, "%s: DMA not pending "
+					"intpr=0x%08x status=0x%08x pend=%d\n",
+					__func__, intpr, status, dma_flag);
+			}
+
+			if ((hsdevp->dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+		} else if (ata_is_pio(qc->tf.protocol)) {
+			ata_sff_hsm_move(ap, qc, status, 0);
+			handled = 1;
+			goto done_irqrestore;
+		} else {
+			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+				goto drv_still_busy;
+		}
+
+		handled = 1;
+		goto done_irqrestore;
+	}
+
+	/*
+	 * This is a NCQ command.  At this point we need to figure out for which
+	 * tags we have gotten a completion interrupt.  One interrupt may serve
+	 * as completion for more than one operation when commands are queued
+	 * (NCQ).  We need to process each completed command.
+	 */
+
+process_cmd:  /* process completed commands */
+	sactive = sata_dwc_core_scr_read(ap, SCR_ACTIVE);
+	tag_mask = (hsdevp->sata_dwc_sactive_issued | sactive) ^ sactive;
+
+	if (sactive != 0 || hsdevp->sata_dwc_sactive_issued > 1 || tag_mask > 1) {
+		dwc_dev_dbg(ap->dev, "%s NCQ: sactive=0x%08x  sactive_issued=0x%08x"
+			" tag_mask=0x%08x\n", __func__, sactive,
+			hsdevp->sata_dwc_sactive_issued, tag_mask);
+	}
+
+	if (unlikely((tag_mask | hsdevp->sata_dwc_sactive_issued) != hsdevp->sata_dwc_sactive_issued)) {
+		dev_warn(ap->dev, "Bad tag mask?  sactive=0x%08x "
+			 "sata_dwc_sactive_issued=0x%08x  tag_mask=0x%08x\n",
+			 sactive, hsdevp->sata_dwc_sactive_issued, tag_mask);
+	}
+
+	/* read just to clear ... not bad if currently still busy */
+	status = ap->ops->sff_check_status(ap);
+	dwc_dev_dbg(ap->dev, "%s ATA status register=0x%x, tag_mask=0x%x\n", __func__, status, tag_mask);
+
+	tag = 0;
+	num_processed = 0;
+	while (tag_mask) {
+		num_processed++;
+		while (!(tag_mask & 0x00000001)) {
+			tag++;
+			tag_mask <<= 1;
+		}
+		tag_mask &= (~0x00000001);
+		qc = ata_qc_from_tag(ap, tag);
+
+		/* To be picked up by completion functions */
+		qc->ap->link.active_tag = tag;
+		hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+		/* Let libata/scsi layers handle error */
+		if (unlikely(status & ATA_ERR)) {
+			dwc_dev_vdbg(ap->dev, "%s ATA_ERR (0x%x)\n",
+					 __func__, status);
+
+			sata_dwc_qc_complete(ap, qc, 1);
+			handled = 1;
+			goto done_irqrestore;
+		}
+
+		/* Process completed command */
+		dwc_dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
+			prot_2_txt(qc->tf.protocol));
+		if (ata_is_dma(qc->tf.protocol)) {
+			hsdevp->dma_interrupt_count++;
+			if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE)
+				dev_warn(ap->dev,
+					"%s: DMA not pending?\n", __func__);
+			if ((hsdevp->dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+		} else {
+			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+				goto still_busy;
+		}
+		continue;
+
+still_busy:
+		ap->stats.idle_irq++;
+		dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n",
+				ap->print_id);
+	} /* while tag_mask */
+
+	/*
+	 * Check to see if any commands completed while we were processing our
+	 * initial set of completed commands (reading of status clears
+	 * interrupts, so we might miss a completed command interrupt if one
+	 * came in while we were processing:
+	 * we read status as part of processing a completed command).
+	 */
+	sactive2 = sata_dwc_core_scr_read(ap, SCR_ACTIVE);
+	if (sactive2 != sactive) {
+		dwc_dev_dbg(ap->dev, "More finished - sactive=0x%x sactive2=0x%x\n",
+			sactive, sactive2);
+		goto process_cmd;
+	}
+	handled = 1;
+
+done_irqrestore:
+	spin_unlock_irqrestore(&host->lock, flags);
+#if defined(CONFIG_APM82181)
+       signal_hdd_led(0 /*off blink*/, -1 /* no color */);
+#endif
+	return IRQ_RETVAL(handled);
+}
+
+
+/*
+ * Clear DMA Control Register after completing transferring data
+ * using AHB DMA.
+ */
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
+
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
+		// Clear receive channel enable bit
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			 SATA_DWC_DMACR_RX_CLEAR(
+				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+	} else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
+		// Clear transmit channel enable bit
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			 SATA_DWC_DMACR_TX_CLEAR(
+				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+	} else {
+		/*
+		 * This should not happen, it indicates the driver is out of
+		 * sync.  If it does happen, clear dmacr anyway.
+		 */
+		dev_err(hsdev->dev, "%s DMA protocol RX and TX DMA not pending "
+			"tag=0x%02x pending=%d dmacr: 0x%08x\n",
+			__func__, tag, hsdevp->dma_pending[tag],
+			in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+
+		// Clear all transmit and receive bit, but TXMOD bit is set to 1
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+				SATA_DWC_DMACR_TXRXCH_CLEAR);
+	}
+}
+
+/*
+ *
+ */
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+{
+	struct ata_queued_cmd *qc;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	u8 tag = 0;
+
+	tag = ap->link.active_tag;
+	qc = ata_qc_from_tag(ap, tag);
+
+#ifdef DEBUG_NCQ
+	if (tag > 0) {
+		dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
+			 "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+			 dir_2_txt(qc->dma_dir), prot_2_txt(qc->tf.protocol),
+			 in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+	}
+#endif
+
+	if (ata_is_dma(qc->tf.protocol)) {
+		// DMA out of sync error
+		if (unlikely(hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE)) {
+			dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
+				"pending dmacr: 0x%08x\n", __func__,
+				in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+		}
+
+		hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+		sata_dwc_qc_complete(ap, qc, check_status);
+		ap->link.active_tag = ATA_TAG_POISON;
+	} else {
+		sata_dwc_qc_complete(ap, qc, check_status);
+	}
+}
+
+/*
+ *
+ */
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+				u32 check_status)
+{
+	u8 status = 0;
+	int i = 0;
+	u32 mask = 0x0;
+	u8 tag = qc->tag;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	u32 serror;
+	int dma_ch;
+
+	dwc_dev_vdbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
+
+	if (unlikely(hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX))
+		dev_err(ap->dev, "TX DMA PENDINGING\n");
+	else if (unlikely(hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX))
+		dev_err(ap->dev, "RX DMA PENDINGING\n");
+
+	if (check_status) {
+		i = 0;
+		do {
+			/* check main status, clearing INTRQ */
+			status = ap->ops->sff_check_status(ap);
+			if (status & ATA_BUSY) {
+				dwc_dev_vdbg(ap->dev, "STATUS BUSY (0x%02x) [%d]\n",
+						status, i);
+			}
+			if (++i > 10)
+				break;
+		} while (status & ATA_BUSY);
+
+		status = ap->ops->sff_check_status(ap);
+		if (unlikely(status & ATA_BUSY))
+			dev_err(ap->dev, "QC complete cmd=0x%02x STATUS BUSY "
+				"(0x%02x) [%d]\n", qc->tf.command, status, i);
+
+
+		// Check error ==> need to process error here
+		serror = sata_dwc_core_scr_read(ap, SCR_ERROR);
+		if (unlikely(serror & SATA_DWC_SERR_ERR_BITS))
+		{
+			dev_err(ap->dev, "****** SERROR=0x%08x ******\n", serror);
+			ap->link.eh_context.i.action |= ATA_EH_RESET;
+			if (ata_is_dma(qc->tf.protocol)) {
+				dma_ch = hsdevp->dma_chan[tag];
+				dma_dwc_terminate_dma(ap, dma_ch);
+			} else {
+				dma_ch = hsdevp->dma_chan[0];
+				dma_dwc_terminate_dma(ap, dma_ch);
+			}
+		}
+	}
+	dwc_dev_vdbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u: "
+		"protocol=%d\n", qc->tf.command, status, ap->print_id,
+		qc->tf.protocol);
+
+	/* clear active bit */
+	mask = (~(qcmd_tag_to_mask(tag)));
+	hsdevp->sata_dwc_sactive_queued = hsdevp->sata_dwc_sactive_queued & mask;
+	hsdevp->sata_dwc_sactive_issued = hsdevp->sata_dwc_sactive_issued & mask;
+	dwc_port_vdbg(ap, "%s - sata_dwc_sactive_queued=0x%08x, sata_dwc_sactive_issued=0x%08x\n",__func__, hsdevp->sata_dwc_sactive_queued, hsdevp->sata_dwc_sactive_issued);
+	dwc_port_vdbg(ap, "dmacr=0x%08x\n",in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+
+	/* Complete taskfile transaction (does not read SCR registers) */
+	ata_qc_complete(qc);
+
+	return 0;
+}
+
+/*
+ * Clear interrupt and error flags in DMA status register.
+ */
+void sata_dwc_irq_clear (struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	dwc_port_dbg(ap,"%s\n",__func__);
+
+	// Clear DMA interrupts
+	clear_chan_interrupts(hsdev->dma_channel);
+	//sata_dma_regs
+	//out_le32(&hsdev->sata_dwc_regs->intmr,
+	//	 in_le32(&hsdev->sata_dwc_regs->intmr) & ~SATA_DWC_INTMR_ERRM);
+	//out_le32(&hsdev->sata_dwc_regs->errmr, 0x0);
+	//sata_dwc_check_status(ap);
+}
+
+/*
+ * Turn on IRQ
+ */
+u8 sata_dwc_irq_on(struct ata_port *ap)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	u8 tmp;
+
+	dwc_port_dbg(ap,"%s\n",__func__);
+	ap->ctl &= ~ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	if (ioaddr->ctl_addr)
+		iowrite8(ap->ctl, ioaddr->ctl_addr);
+	tmp = ata_wait_idle(ap);
+
+	ap->ops->sff_irq_clear(ap);
+	enable_err_irq(hsdev);
+
+	return tmp;
+}
+
+
+/*
+ * This function enables the interrupts in IMR and unmasks them in ERRMR
+ * 
+ */
+static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
+{
+	// Enable interrupts
+	out_le32(&hsdev->sata_dwc_regs->intmr,
+		 SATA_DWC_INTMR_ERRM |
+		 SATA_DWC_INTMR_NEWFPM |
+		 SATA_DWC_INTMR_PMABRTM |
+		 SATA_DWC_INTMR_DMATM);
+
+	/*
+	 * Unmask the error bits that should trigger an error interrupt by
+	 * setting the error mask register.
+	 */
+	out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERR_ERR_BITS);
+
+	dwc_dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n", __func__,
+		in_le32(&hsdev->sata_dwc_regs->intmr),
+		in_le32(&hsdev->sata_dwc_regs->errmr));
+}
+
+/* 
+ * Configure DMA and interrupts on SATA port. This should be called after
+ * hardreset is executed on the SATA port.
+ */
+static void sata_dwc_init_port ( struct ata_port *ap ) {
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+
+	// Configure DMA
+	if (ap->port_no == 0)  {
+		dwc_dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+				__func__);
+
+		// Clear all transmit/receive bits
+		out_le32(&hsdev->sata_dwc_regs->dmacr,
+			 SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+		dwc_dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n", __func__);
+		out_le32(&hsdev->sata_dwc_regs->dbtsr,
+			 (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+			  SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+	}
+
+	// Enable interrupts
+	sata_dwc_enable_interrupts(hsdev);
+}
+
+
+/*
+ * Setup SATA ioport with corresponding register addresses
+ */
+static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
+{
+	port->cmd_addr = (void *)base + 0x00;
+	port->data_addr = (void *)base + 0x00;
+
+	port->error_addr = (void *)base + 0x04;
+	port->feature_addr = (void *)base + 0x04;
+
+	port->nsect_addr = (void *)base + 0x08;
+
+	port->lbal_addr = (void *)base + 0x0c;
+	port->lbam_addr = (void *)base + 0x10;
+	port->lbah_addr = (void *)base + 0x14;
+
+	port->device_addr = (void *)base + 0x18;
+	port->command_addr = (void *)base + 0x1c;
+	port->status_addr = (void *)base + 0x1c;
+
+	port->altstatus_addr = (void *)base + 0x20;
+	port->ctl_addr = (void *)base + 0x20;
+}
+
+
+/*
+ * Function : sata_dwc_port_start
+ * arguments : struct ata_ioports *port
+ * Return value : returns 0 if success, error code otherwise
+ * This function allocates the scatter gather LLI table for AHB DMA
+ */
+static int sata_dwc_port_start(struct ata_port *ap)
+{
+	int err = 0;
+	struct sata_dwc_device *hsdev;
+	struct sata_dwc_device_port *hsdevp = NULL;
+	struct device *pdev;
+	u32 sstatus;
+	int i;
+
+	hsdev = HSDEV_FROM_AP(ap);
+
+	dwc_dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no);
+
+	hsdev->host = ap->host;
+	pdev = ap->host->dev;
+	if (!pdev) {
+		dev_err(ap->dev, "%s: no ap->host->dev\n", __func__);
+		err = -ENODEV;
+		goto cleanup_exit;
+	}
+
+	/* Allocate Port Struct */
+	hsdevp = kmalloc(sizeof(*hsdevp), GFP_KERNEL);
+	if (!hsdevp) {
+		dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
+		err = -ENOMEM;
+		goto cleanup_exit;
+	}
+	memset(hsdevp, 0, sizeof(*hsdevp));
+	hsdevp->hsdev = hsdev;
+
+	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+
+	ap->prd = 0;	/* set these so libata doesn't use them */
+	ap->prd_dma = 0;
+
+	/*
+	 * DMA - Assign scatter gather LLI table. We can't use the libata
+	 * version since it's PRD is IDE PCI specific.
+	 */
+	for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+		hsdevp->llit[i] = dma_alloc_coherent(pdev,
+						     SATA_DWC_DMAC_LLI_TBL_SZ,
+						     &(hsdevp->llit_dma[i]),
+						     GFP_ATOMIC);
+		if (!hsdevp->llit[i]) {
+			dev_err(ap->dev, "%s: dma_alloc_coherent failed size "
+				"0x%x\n", __func__, SATA_DWC_DMAC_LLI_TBL_SZ);
+			err = -ENOMEM;
+			goto cleanup_exit;
+		}
+	}
+
+	if (ap->port_no == 0)  {
+		dwc_dev_vdbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+				__func__);
+
+		out_le32(&hsdev->sata_dwc_regs->dmacr,
+			 SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+		dwc_dev_vdbg(ap->dev, "%s: setting burst size in DBTSR\n", __func__);
+		out_le32(&hsdev->sata_dwc_regs->dbtsr,
+			 (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+			  SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+		 ata_port_printk(ap, KERN_INFO, "%s: setting burst size in DBTSR: 0x%08x\n", 
+			__func__, in_le32(&hsdev->sata_dwc_regs->dbtsr));
+	}
+
+	/* Clear any error bits before libata starts issuing commands */
+	clear_serror(ap);
+
+	ap->private_data = hsdevp;
+
+	/* Are we in Gen I or II */
+	sstatus = sata_dwc_core_scr_read(ap, SCR_STATUS);
+	switch (SATA_DWC_SCR0_SPD_GET(sstatus)) {
+	case 0x0:
+		dev_info(ap->dev, "**** No neg speed (nothing attached?) \n");
+		break;
+	case 0x1:
+		dev_info(ap->dev, "**** GEN I speed rate negotiated \n");
+		break;
+	case 0x2:
+		dev_info(ap->dev, "**** GEN II speed rate negotiated \n");
+		break;
+	}
+
+cleanup_exit:
+	if (err) {
+		kfree(hsdevp);
+		sata_dwc_port_stop(ap);
+		dwc_dev_vdbg(ap->dev, "%s: fail\n", __func__);
+	} else {
+		dwc_dev_vdbg(ap->dev, "%s: done\n", __func__);
+	}
+
+	return err;
+}
+
+
+static void sata_dwc_port_stop(struct ata_port *ap)
+{
+	int i;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	dwc_port_dbg(ap, "%s: stop port\n", __func__);
+
+	if (hsdevp && hsdev) {
+		/* deallocate LLI table */
+		for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+			dma_free_coherent(ap->host->dev,
+					  SATA_DWC_DMAC_LLI_TBL_SZ,
+					  hsdevp->llit[i], hsdevp->llit_dma[i]);
+		}
+
+		kfree(hsdevp);
+	}
+	ap->private_data = NULL;
+}
+
+/*
+ * Since the SATA DWC is master only. The dev select operation will 
+ * be removed.
+ */
+void sata_dwc_dev_select(struct ata_port *ap, unsigned int device)
+{
+	// Do nothing
+	ndelay(100);
+}
+
+/*
+ * Function : sata_dwc_exec_command_by_tag
+ * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued
+ * Return value : None
+ * This function keeps track of individual command tag ids and calls
+ * ata_exec_command in libata
+ */
+static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
+					 struct ata_taskfile *tf,
+					 u8 tag, u32 cmd_issued)
+{
+	unsigned long flags;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	dwc_dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d, ap->link->tag=0x%08x\n", __func__, tf->command,
+		ata_cmd_2_txt(tf), tag, ap->link.active_tag);
+
+	spin_lock_irqsave(&ap->host->lock, flags);
+	hsdevp->cmd_issued[tag] = cmd_issued;
+	spin_unlock_irqrestore(&ap->host->lock, flags);
+
+	/*
+	 * Clear SError before executing a new command.
+	 *
+	 * TODO if we read a PM's registers now, we will throw away the task
+	 * file values loaded into the shadow registers for this command.
+	 *
+	 * sata_dwc_scr_write and read can not be used here. Clearing the PM
+	 * managed SError register for the disk needs to be done before the
+	 * task file is loaded.
+	 */
+	clear_serror(ap);
+	ata_sff_exec_command(ap, tf);
+}
+
+static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag,
+				     SATA_DWC_CMD_ISSUED_PENDING);
+}
+
+static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	u8 tag = qc->tag;
+
+	dwc_port_dbg(qc->ap, "%s\n", __func__);
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dwc_dev_vdbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+			__func__, qc->ap->link.sactive, tag);
+	} else {
+		tag = 0;
+	}
+
+	sata_dwc_bmdma_setup_by_tag(qc, tag);
+}
+
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	volatile int start_dma;
+	u32 reg, dma_chan;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
+	struct ata_port *ap = qc->ap;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	int dir = qc->dma_dir;
+	dma_chan = hsdevp->dma_chan[tag];
+
+	/* Used for ata_bmdma_start(qc) -- we are not BMDMA compatible */
+
+	if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
+		start_dma = 1;
+		if (dir == DMA_TO_DEVICE)
+			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX;
+		else
+			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
+	} else {
+		dev_err(ap->dev, "%s: Command not pending cmd_issued=%d "
+			"(tag=%d) - DMA NOT started\n", __func__,
+			hsdevp->cmd_issued[tag], tag);
+		start_dma = 0;
+	}
+
+	dwc_dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
+			"start_dma? %x\n", __func__, qc, tag, qc->tf.command,
+			dir_2_txt(qc->dma_dir), start_dma);
+	sata_dwc_tf_dump(hsdev->dev, &(qc->tf));
+
+	// Start DMA transfer
+	if (start_dma) {
+		reg = sata_dwc_core_scr_read(ap, SCR_ERROR);
+		if (unlikely(reg & SATA_DWC_SERR_ERR_BITS)) {
+			dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
+				__func__, reg);
+			//sata_async_notification(ap);
+			//return;
+		}
+
+		// Set DMA control registers
+		if (dir == DMA_TO_DEVICE)
+			out_le32(&hsdev->sata_dwc_regs->dmacr,
+					SATA_DWC_DMACR_TXCHEN);
+		else
+			out_le32(&hsdev->sata_dwc_regs->dmacr,
+					SATA_DWC_DMACR_RXCHEN);
+
+		dwc_dev_vdbg(ap->dev, "%s: setting DMACR: 0x%08x\n", __func__, in_le32(&hsdev->sata_dwc_regs->dmacr));
+		/* Enable AHB DMA transfer on the specified channel */
+		dma_dwc_xfer_start(dma_chan);
+	}
+}
+
+
+static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
+{
+	u8 tag = qc->tag;
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dwc_dev_vdbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+			__func__, qc->ap->link.sactive, tag);
+	} else {
+		tag = 0;
+	}
+
+	dwc_port_dbg(qc->ap, "%s, tag=0x%08x\n", __func__, tag);
+	sata_dwc_bmdma_start_by_tag(qc, tag);
+}
+
+/*
+ * Function : sata_dwc_qc_prep_by_tag
+ * arguments : ata_queued_cmd *qc, u8 tag
+ * Return value : None
+ * qc_prep for a particular queued command based on tag
+ */
+static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	struct ata_port *ap = qc->ap;
+	u32 dma_chan;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	int dir;
+	int err;
+
+	// DMA direction
+	dir = qc->dma_dir;
+
+	if ((dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+		return;
+
+	dwc_dev_vdbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
+		__func__, ap->port_no, dir_2_txt(dir), qc->n_elem);
+
+	// Setup DMA for transfer
+	dma_chan = dma_dwc_xfer_setup(qc, hsdevp->llit[tag],
+			hsdevp->llit_dma[tag],
+			(void *__iomem)(&hsdev->sata_dwc_regs->dmadr));
+
+	if (unlikely(dma_chan < 0)) {
+		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
+			__func__, err);
+		return;
+	}
+
+	hsdevp->dma_chan[tag] = dma_chan;
+}
+
+
+
+/**
+ *	ata_sff_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Issues ATA command, with proper synchronization with interrupt
+ *	handler / other threads.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void sata_dwc_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	iowrite8(tf->command, ap->ioaddr.command_addr);
+	/*	If we have an mmio device with no ctl and no altstatus
+	 *	method this will fail. No such devices are known to exist.
+	 */
+	if (ap->ioaddr.altstatus_addr)
+		ioread8(ap->ioaddr.altstatus_addr);
+	ndelay(400);
+}
+
+/**
+ *	sata_dwc_tf_to_host - issue ATA taskfile to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Issues ATA taskfile register set to ATA host controller,
+ *	with proper synchronization with interrupt handler and
+ *	other threads.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+static inline void sata_dwc_tf_to_host(struct ata_port *ap,
+				  const struct ata_taskfile *tf)
+{
+	dwc_port_dbg(ap,"%s\n",__func__);
+	ap->ops->sff_tf_load(ap, tf);
+	sata_dwc_exec_command(ap, tf);
+}
+
+
+/*
+ * Process command queue issue
+ */
+static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	int ret = 0;
+	struct ata_eh_info *ehi;
+	u32 scontrol, sstatus;
+	scontrol = sata_dwc_core_scr_read(ap, SCR_CONTROL);
+
+	ehi = &ap->link.eh_info;
+	/*
+	 * Fix the problem when PMP card is unplugged from the SATA port.
+	 * QC is still issued but no device present. Ignore the current QC.
+	 * and pass error to error handler
+	 */
+	sstatus = sata_dwc_core_scr_read(ap, SCR_STATUS);
+	if ( sstatus == 0x0) {
+		ata_port_printk(ap, KERN_INFO, "Detect connection lost while commands are executing --> ignore current command\n");
+		ata_ehi_hotplugged(ehi);
+		ap->link.eh_context.i.action |= ATA_EH_RESET;
+		return ret;
+	}
+
+	// Set PMP field in the SCONTROL register
+	if ( sata_pmp_attached(ap) )
+		sata_dwc_pmp_select(ap, qc->dev->link->pmp);
+
+#ifdef DEBUG_NCQ
+	if (qc->tag > 0 || ap->link.sactive > 1) {
+		dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d prot=%s"
+			" ap active_tag=0x%08x ap sactive=0x%08x\n",
+			__func__, ap->print_id, qc->tf.command,
+			ata_cmd_2_txt(&qc->tf), qc->tag,
+			prot_2_txt(qc->tf.protocol), ap->link.active_tag,
+			ap->link.sactive);
+	}
+#endif
+
+	// Process NCQ
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dwc_link_dbg(qc->dev->link, "%s --> process NCQ , ap->link.active_tag=0x%08x, active_tag=0%08x\n", __func__, ap->link.active_tag, qc->tag);
+		ap->link.active_tag = qc->tag;
+		ap->ops->sff_tf_load(ap, &qc->tf);
+		sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
+					     SATA_DWC_CMD_ISSUED_PENDING);
+	} else {
+		dwc_link_dbg(qc->dev->link, "%s --> non NCQ process, ap->link.active_tag=%d, active_tag=0%08x\n", __func__, ap->link.active_tag, qc->tag);
+		// Sync ata_port with qc->tag
+		ap->link.active_tag = qc->tag;
+		ret = ata_sff_qc_issue(qc);
+	}
+
+	return ret;
+}
+
+#if 0
+/*
+ * Function : sata_dwc_eng_timeout
+ * arguments : ata_port *ap
+ * Return value : None
+ * error handler for DMA time out
+ * ata_eng_timeout(ap) -- this does bmdma stuff which can not be done by this
+ * driver. SEE ALSO ata_qc_timeout(ap)
+ */
+static void sata_dwc_eng_timeout(struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct ata_queued_cmd *qc;
+	u8  tag;
+	uint mask = 0x0;
+	unsigned long flags;
+	u32 serror, intpr, dma_ch;
+
+	tag = ap->link.active_tag;
+	dma_ch = hsdevp->dma_chan[tag];
+	qc = ata_qc_from_tag(ap, tag);
+
+	dev_err(ap->dev, "%s: id=%d active_tag=%d qc=%p dma_chan=%d\n",
+		__func__, ap->print_id, tag, qc, dma_ch);
+
+	intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
+	serror = sata_dwc_core_scr_read(ap, SCR_ERROR);
+
+	dev_err(ap->dev, "intpr=0x%08x serror=0x%08x\n", intpr, serror);
+
+	/* If there are no error bits set, can we just pass this on to eh? */
+	if (!(serror & SATA_DWC_SERR_ERR_BITS) &&
+	    !(intpr & SATA_DWC_INTPR_ERR)) {
+
+		spin_lock_irqsave(&ap->host->lock, flags);
+		if (dma_dwc_channel_enabled(dma_ch))
+			dma_dwc_terminate_dma(ap, dma_ch);
+
+		hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+
+		/* clear active bit */
+		mask = (~(qcmd_tag_to_mask(tag)));
+		hsdevp->sata_dwc_sactive_queued = hsdevp->sata_dwc_sactive_queued & mask;
+		hsdevp->sata_dwc_sactive_issued = hsdevp->sata_dwc_sactive_issued & mask;
+
+		spin_unlock_irqrestore(&ap->host->lock, flags);
+	} else {
+		/* This is wrong, what really needs to be done is a reset. */
+
+		spin_lock_irqsave(ap->lock, flags);
+
+		if (ata_is_dma(qc->tf.protocol)) {
+			/* disable DMAC */
+			dma_dwc_terminate_dma(ap, dma_ch);
+		}
+
+		spin_unlock_irqrestore(ap->lock, flags);
+	}
+	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+	if (qc->flags & ATA_QCFLAG_ACTIVE) {
+		qc->err_mask |= AC_ERR_TIMEOUT;
+		/*
+		 * test-only: The original code (AMCC: 2.6.19) called
+		 * ata_eng_timeout(ap) here. This function is not available
+		 * anymore. So what to do now?
+		 */
+	}
+}
+#endif
+/*
+ * Function : sata_dwc_qc_prep
+ * arguments : ata_queued_cmd *qc
+ * Return value : None
+ * qc_prep for a particular queued command
+ */
+static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
+{
+	u32 sactive;
+	u8 tag = qc->tag;
+
+	 if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+                return;
+
+#ifdef DEBUG_NCQ
+	if (qc->tag > 0) {
+		dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
+			 __func__, tag, qc->ap->link.active_tag);
+	}
+#endif
+
+	if (qc->tf.protocol == ATA_PROT_NCQ) {
+		sactive = sata_dwc_core_scr_read(qc->ap, SCR_ACTIVE);
+		sactive |= (0x00000001 << tag);
+		sata_dwc_core_scr_write(qc->ap, SCR_ACTIVE, sactive);
+		dwc_dev_vdbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
+			"sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
+			sactive);
+	} else {
+		tag = 0;
+	}
+
+	sata_dwc_qc_prep_by_tag(qc, tag);	
+}
+
+
+
+static void sata_dwc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		ata_eh_freeze_port(qc->ap);
+}
+
+static void sata_dwc_error_handler(struct ata_port *ap)
+{
+	u32 serror;
+	u32 intmr, errmr;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	serror = sata_dwc_core_scr_read(ap, SCR_ERROR);
+	intmr = in_le32(&hsdev->sata_dwc_regs->intmr);
+	errmr = in_le32(&hsdev->sata_dwc_regs->errmr);
+
+	//sata_dwc_dma_xfer_complete(ap,1);
+	dwc_port_dbg(ap, "%s: SERROR=0x%08x, INTMR=0x%08x, ERRMR=0x%08x\n", __func__, serror, intmr, errmr);
+
+	dwc_port_vdbg(ap, "%s - sata_dwc_sactive_queued=0x%08x, sata_dwc_sactive_issued=0x%08x\n",__func__, hsdevp->sata_dwc_sactive_queued, hsdevp->sata_dwc_sactive_issued);
+	dwc_port_vdbg(ap, "dmacr=0x%08x\n",in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+	dwc_port_vdbg(ap, "qc_active=0x%08x, qc_allocated=0x%08x, active_tag=%d\n", ap->qc_active, ap->qc_allocated, ap->link.active_tag);
+
+	sata_pmp_error_handler(ap);
+}
+
+/*
+ * sata_dwc_check_status - Get value of the Status Register
+ * @ap: Port to check
+ *
+ * Output content of the status register (CDR7)
+ */
+u8 sata_dwc_check_status(struct ata_port *ap)
+{
+	return ioread8(ap->ioaddr.status_addr);
+}
+
+
+/*
+ * Freeze the port by clear interrupt
+ * @ap: Port to freeze
+ */
+void sata_dwc_freeze(struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	dwc_port_dbg(ap, "call %s ...\n",__func__);
+	// turn IRQ off
+	clear_intpr(hsdev);
+	clear_serror(ap);
+	out_le32(&hsdev->sata_dwc_regs->intmr, 0x0);
+}
+
+/*
+ * Thaw the port by turning IRQ on
+ */
+void sata_dwc_thaw(struct ata_port *ap)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+
+	dwc_port_dbg(ap, "call %s ...\n",__func__);
+	// Clear IRQ
+	clear_intpr(hsdev);
+	// Turn IRQ back on
+	sata_dwc_enable_interrupts(hsdev);
+}
+
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_dwc_sht = {
+	ATA_NCQ_SHT(DRV_NAME),
+	/*
+	 * test-only: Currently this driver doesn't handle NCQ
+	 * correctly. We enable NCQ but set the queue depth to a
+	 * max of 1. This will get fixed in in a future release.
+	 */
+//        .sg_tablesize           = LIBATA_MAX_PRD,
+	.can_queue 		= ATA_DEF_QUEUE,	/* ATA_MAX_QUEUE */
+	.dma_boundary 		= ATA_DMA_BOUNDARY,
+};
+
+
+static struct ata_port_operations sata_dwc_ops = {
+	.inherits		= &sata_pmp_port_ops,
+	.dev_config		= sata_dwc_dev_config,
+	
+	.error_handler	= sata_dwc_error_handler,
+	.softreset		= sata_dwc_softreset,
+	.hardreset		= sata_dwc_hardreset,
+	.pmp_softreset	= sata_dwc_softreset,
+	.pmp_hardreset	= sata_dwc_pmp_hardreset,
+
+	.qc_defer		= sata_pmp_qc_defer_cmd_switch,
+	.qc_prep		= sata_dwc_qc_prep,
+	.qc_issue		= sata_dwc_qc_issue,
+	.qc_fill_rtf	= ata_sff_qc_fill_rtf,
+
+	.scr_read		= sata_dwc_scr_read,
+	.scr_write		= sata_dwc_scr_write,
+
+	.port_start		= sata_dwc_port_start,
+	.port_stop		= sata_dwc_port_stop,
+
+	.bmdma_setup	= sata_dwc_bmdma_setup,
+	.bmdma_start	= sata_dwc_bmdma_start,
+	// Reuse some SFF functions
+	.sff_check_status	= sata_dwc_check_status,
+	.sff_tf_read	= ata_sff_tf_read,
+	.sff_data_xfer	= ata_sff_data_xfer,
+	.sff_tf_load	= ata_sff_tf_load,
+	.sff_dev_select	= sata_dwc_dev_select,
+	.sff_exec_command	= sata_dwc_exec_command,
+
+	.sff_irq_on		= sata_dwc_irq_on,
+/*	.sff_irq_clear	= sata_dwc_irq_clear,
+	.freeze			= sata_dwc_freeze,
+	.thaw			= sata_dwc_thaw,
+	.sff_irq_on		= ata_sff_irq_on,
+	*/
+	.sff_irq_clear	= ata_sff_irq_clear,
+	.freeze			= ata_sff_freeze,
+	.thaw			= ata_sff_thaw,
+	.pmp_attach		= sata_dwc_pmp_attach,
+	.pmp_detach		= sata_dwc_pmp_detach,
+	.post_internal_cmd	= sata_dwc_post_internal_cmd,
+
+	/* test-only: really needed? */
+	//.eng_timeout		= sata_dwc_eng_timeout,
+};
+
+static const struct ata_port_info sata_dwc_port_info[] = {
+	{
+		/*
+		 * test-only: Currently this driver doesn't handle NCQ
+		 * correctly. So we disable NCQ here for now. To enable
+		 * it ATA_FLAG_NCQ needs to be added to the flags below.
+		 */
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_NCQ |
+				  ATA_FLAG_PMP | ATA_FLAG_AN, 
+		.pio_mask	= 0x1f,	/* pio 0-4 */ 
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &sata_dwc_ops,
+	},
+};
+
+static int sata_dwc_probe(struct of_device *ofdev,
+			const struct of_device_id *match)
+{
+	struct sata_dwc_device *hsdev;
+	u32 idr, versionr;
+	char *ver = (char *)&versionr;
+	u8 *base = NULL;
+	int err = 0;
+	int irq;
+	struct ata_host *host;
+	struct ata_port_info pi = sata_dwc_port_info[0];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+
+	const unsigned int *dma_channel;
+	/*
+	 * Check if device is enabled
+	 */
+	if (!of_device_is_available(ofdev->node)) {
+		printk(KERN_INFO "%s: Port disabled via device-tree\n", 
+			ofdev->node->full_name);
+		return 0;
+	}
+
+	/* Allocate DWC SATA device */
+	hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+	if (hsdev == NULL) {
+		dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+	memset(hsdev, 0, sizeof(*hsdev));
+
+
+	// Identify SATA DMA channel used for the current SATA device
+	dma_channel = of_get_property(ofdev->node, "dma-channel", NULL);
+	if ( dma_channel ) {
+		dev_notice(&ofdev->dev, "Gettting DMA channel %d\n", *dma_channel);
+		hsdev->dma_channel = *dma_channel;
+	} else
+		hsdev->dma_channel = 0;
+
+	/* Ioremap SATA registers */
+	base = of_iomap(ofdev->node, 0);
+	if (!base) {
+		dev_err(&ofdev->dev, "ioremap failed for SATA register address\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+	hsdev->reg_base = base;
+	dwc_dev_vdbg(&ofdev->dev, "ioremap done for SATA register address\n");
+
+	/* Synopsys DWC SATA specific Registers */
+	hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
+
+	/* Allocate and fill host */
+	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+	if (!host) {
+		dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	host->private_data = hsdev;
+
+	/* Setup port */
+	host->ports[0]->ioaddr.cmd_addr = base;
+	host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+	hsdev->scr_base = (u8 *)(base + SATA_DWC_SCR_OFFSET);
+	sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
+
+	/* Read the ID and Version Registers */
+	idr = in_le32(&hsdev->sata_dwc_regs->idr);
+	versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
+	dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
+		   idr, ver[0], ver[1], ver[2]);
+
+	/* Get SATA DMA interrupt number */
+	irq = irq_of_parse_and_map(ofdev->node, 1);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no SATA DMA irq\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/* Get physical SATA DMA register base address */
+	if (!sata_dma_regs) {
+	sata_dma_regs = of_iomap(ofdev->node, 1);
+		if (!sata_dma_regs) {
+			dev_err(&ofdev->dev, "ioremap failed for AHBDMA register address\n");
+			err = -ENODEV;
+			goto error_out;
+		}
+	}
+	/* Save dev for later use in dev_xxx() routines */
+	hsdev->dev = &ofdev->dev;
+
+	/* Init glovbal dev list */
+	dwc_dev_list[hsdev->dma_channel] = hsdev;
+
+	/* Initialize AHB DMAC */
+	hsdev->irq_dma = irq;
+	dma_dwc_init(hsdev);
+	dma_register_interrupt(hsdev);
+
+
+	/* Enable SATA Interrupts */
+	sata_dwc_enable_interrupts(hsdev);
+
+	/* Get SATA interrupt number */
+	irq = irq_of_parse_and_map(ofdev->node, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no SATA irq\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/*
+	 * Now, register with libATA core, this will also initiate the
+	 * device discovery process, invoking our port_start() handler &
+	 * error_handler() to execute a dummy Softreset EH session
+	 */
+	ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+
+	dev_set_drvdata(&ofdev->dev, host);
+
+	/* Everything is fine */
+	return 0;
+
+error_out:
+	/* Free SATA DMA resources */
+	dma_dwc_exit(hsdev);
+
+	if (base)
+		iounmap(base);
+
+	if (hsdev)
+		kfree(hsdev);
+
+	return err;
+}
+
+static int sata_dwc_remove(struct of_device *ofdev)
+{
+	struct device *dev = &ofdev->dev;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct sata_dwc_device *hsdev = host->private_data;
+
+	ata_host_detach(host);
+
+	dev_set_drvdata(dev, NULL);
+
+	/* Free SATA DMA resources */
+	dma_dwc_exit(hsdev);
+
+	iounmap(hsdev->reg_base);
+	kfree(hsdev);
+	kfree(host);
+
+	dwc_dev_vdbg(&ofdev->dev, "done\n");
+
+	return 0;
+}
+
+static const struct of_device_id sata_dwc_match[] = {
+	{ .compatible = "amcc,sata-460ex", },
+	{ .compatible = "amcc,sata-apm82181", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sata_dwc_match);
+
+static struct of_platform_driver sata_dwc_driver = {
+	.name = "sata-dwc",
+	.match_table = sata_dwc_match,
+	.probe = sata_dwc_probe,
+	.remove = sata_dwc_remove,
+};
+
+static int __init sata_dwc_init(void)
+{
+	return of_register_platform_driver(&sata_dwc_driver);
+}
+
+static void __exit sata_dwc_exit(void)
+{
+	of_unregister_platform_driver(&sata_dwc_driver);
+}
+
+module_init(sata_dwc_init);
+module_exit(sata_dwc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller driver");
+MODULE_VERSION(DRV_VERSION);