diff options
| author | Tejun Heo <htejun@gmail.com> | 2008-04-07 22:47:16 +0900 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-04-17 15:44:21 -0400 |
| commit | 9363c3825ea9ad76561eb48a395349dd29211ed6 (patch) | |
| tree | abe89a0f7c82b805d84b1a211c97b317f6628d5f /drivers/ata/pata_cmd640.c | |
| parent | b67a1064cb1c1d3b43e01e8b43a6a8dcdefed733 (diff) | |
libata: rename SFF functions
SFF functions have confusing names. Some have sff prefix, some have
bmdma, some std, some pci and some none. Unify the naming by...
* SFF functions which are common to both BMDMA and non-BMDMA are
prefixed with ata_sff_.
* SFF functions which are specific to BMDMA are prefixed with
ata_bmdma_.
* SFF functions which are specific to PCI but apply to both BMDMA and
non-BMDMA are prefixed with ata_pci_sff_.
* SFF functions which are specific to PCI and BMDMA are prefixed with
ata_pci_bmdma_.
* Drop generic prefixes from LLD specific routines. For example,
bfin_std_dev_select -> bfin_dev_select.
The following renames are noteworthy.
ata_qc_issue_prot() -> ata_sff_qc_issue()
ata_pci_default_filter() -> ata_bmdma_mode_filter()
ata_dev_try_classify() -> ata_sff_dev_classify()
This rename is in preparation of separating SFF support out of libata
core layer. This patch strictly renames functions and doesn't
introduce any behavior difference.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Diffstat (limited to 'drivers/ata/pata_cmd640.c')
| -rw-r--r-- | drivers/ata/pata_cmd640.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 27219b00edf..a907cf47889 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -107,8 +107,8 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); } else { /* Save the shared timings for channel, they will be loaded - by qc_issue_prot. Reloading the setup time is expensive - so we keep a merged one loaded */ + by qc_issue. Reloading the setup time is expensive so we + keep a merged one loaded */ pci_read_config_byte(pdev, ARTIM23, ®); reg &= 0x3F; reg |= t.setup; @@ -119,14 +119,14 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) /** - * cmd640_qc_issue_prot - command preparation hook + * cmd640_qc_issue - command preparation hook * @qc: Command to be issued * * Channel 1 has shared timings. We must reprogram the * clock each drive 2/3 switch we do. */ -static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; @@ -137,7 +137,7 @@ static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc) pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]); timing->last = adev->devno; } - return ata_qc_issue_prot(qc); + return ata_sff_qc_issue(qc); } /** @@ -172,8 +172,8 @@ static struct scsi_host_template cmd640_sht = { static struct ata_port_operations cmd640_port_ops = { .inherits = &ata_bmdma_port_ops, /* In theory xfer_noirq is not needed once we kill the prefetcher */ - .data_xfer = ata_data_xfer_noirq, - .qc_issue = cmd640_qc_issue_prot, + .data_xfer = ata_sff_data_xfer_noirq, + .qc_issue = cmd640_qc_issue, .cable_detect = ata_cable_40wire, .set_piomode = cmd640_set_piomode, .port_start = cmd640_port_start, @@ -224,7 +224,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) cmd640_hardware_init(pdev); - return ata_pci_init_one(pdev, ppi, &cmd640_sht, NULL); + return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL); } #ifdef CONFIG_PM |