pata_cmd640: CMD640 PCI support

Support for the PCI CMD640 (not VLB)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 298 insertions, 0 deletions

diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
new file mode 100644
index 00000000000..4d01d469241
--- /dev/null
+++ b/drivers/ata/pata_cmd640.c
@@ -0,0 +1,298 @@
+/*
+ * pata_cmd640.c 	- CMD640 PCI PATA for new ATA layer
+ *			  (C) 2007 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * Based upon
+ *  linux/drivers/ide/pci/cmd640.c		Version 1.02  Sep 01, 1996
+ *
+ *  Copyright (C) 1995-1996  Linus Torvalds & authors (see driver)
+ *
+ *	This drives only the PCI version of the controller. If you have a
+ *	VLB one then we have enough docs to support it but you can write
+ *	your own code.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cmd640"
+#define DRV_VERSION "0.0.3"
+
+struct cmd640_reg {
+	int last;
+	u8 reg58[ATA_MAX_DEVICES];
+};
+
+enum {
+	CFR = 0x50,
+	CNTRL = 0x51,
+	CMDTIM = 0x52,
+	ARTIM0 = 0x53,
+	DRWTIM0 = 0x54,
+	ARTIM23 = 0x57,
+	DRWTIM23 = 0x58,
+	BRST = 0x59
+};
+
+/**
+ *	cmd640_set_piomode	-	set initial PIO mode data
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup.
+ */
+
+static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct cmd640_reg *timing = ap->private_data;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_timing t;
+	const unsigned long T = 1000000 / 33;
+	const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
+	u8 reg;
+	int arttim = ARTIM0 + 2 * adev->devno;
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+		printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
+		return;
+	}
+
+	/* The second channel has shared timings and the setup timing is
+	   messy to switch to merge it for worst case */
+	if (ap->port_no && pair) {
+		struct ata_timing p;
+		ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
+		ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
+	}
+
+	/* Make the timings fit */
+	if (t.recover > 16) {
+		t.active += t.recover - 16;
+		t.recover = 16;
+	}
+	if (t.active > 16)
+		t.active = 16;
+
+	/* Now convert the clocks into values we can actually stuff into
+	   the chip */
+
+	if (t.recover > 1)
+		t.recover--;	/* 640B only */
+	else
+		t.recover = 15;
+
+	if (t.setup > 4)
+		t.setup = 0xC0;
+	else
+		t.setup = setup_data[t.setup];
+
+	if (ap->port_no == 0) {
+		t.active &= 0x0F;	/* 0 = 16 */
+
+		/* Load setup timing */
+		pci_read_config_byte(pdev, arttim, &reg);
+		reg &= 0x3F;
+		reg |= t.setup;
+		pci_write_config_byte(pdev, arttim, reg);
+
+		/* Load active/recovery */
+		pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
+	} else {
+		/* Save the shared timings for channel, they will be loaded
+		   by qc_issue_prot. Reloading the setup time is expensive
+		   so we keep a merged one loaded */
+		pci_read_config_byte(pdev, ARTIM23, &reg);
+		reg &= 0x3F;
+		reg |= t.setup;
+		pci_write_config_byte(pdev, ARTIM23, reg);
+		timing->reg58[adev->devno] = (t.active << 4) | t.recover;
+	}
+}
+
+
+/**
+ *	cmd640_qc_issue_prot	-	command preparation hook
+ *	@qc: Command to be issued
+ *
+ *	Channel 1 has shared timings. We must reprogram the
+ *	clock each drive 2/3 switch we do.
+ */
+
+static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct cmd640_reg *timing = ap->private_data;
+
+	if (ap->port_no != 0 && adev->devno != timing->last) {
+		pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
+		timing->last = adev->devno;
+	}
+	return ata_qc_issue_prot(qc);
+}
+
+/**
+ *	cmd640_port_start	-	port setup
+ *	@ap: ATA port being set up
+ *
+ *	The CMD640 needs to maintain private data structures so we
+ *	allocate space here.
+ */
+
+static int cmd640_port_start(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct cmd640_reg *timing;
+
+	int ret = ata_port_start(ap);
+	if (ret < 0)
+		return ret;
+
+	timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
+	if (timing == NULL)
+		return -ENOMEM;
+	timing->last = -1;	/* Force a load */
+	ap->private_data = timing;
+	return ret;
+}
+
+static struct scsi_host_template cmd640_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+};
+
+static struct ata_port_operations cmd640_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cmd640_set_piomode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= ata_bmdma_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= cmd640_qc_issue_prot,
+
+	/* In theory this is not needed once we kill the prefetcher */
+	.data_xfer	= ata_data_xfer_noirq,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
+
+	.port_start	= cmd640_port_start,
+};
+
+static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	u8 r;
+	u8 ctrl;
+
+	static struct ata_port_info info = {
+		.sht = &cmd640_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.port_ops = &cmd640_port_ops
+	};
+
+	static struct ata_port_info *port_info[2] = { &info, &info };
+
+	/* CMD640 detected, commiserations */
+	pci_write_config_byte(pdev, 0x5C, 0x00);
+	/* Get version info */
+	pci_read_config_byte(pdev, CFR, &r);
+	/* PIO0 command cycles */
+	pci_write_config_byte(pdev, CMDTIM, 0);
+	/* 512 byte bursts (sector) */
+	pci_write_config_byte(pdev, BRST, 0x40);
+	/*
+	 * A reporter a long time ago
+	 * Had problems with the data fifo
+	 * So don't run the risk
+	 * Of putting crap on the disk
+	 * For its better just to go slow
+	 */
+	/* Do channel 0 */
+	pci_read_config_byte(pdev, CNTRL, &ctrl);
+	pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
+	/* Ditto for channel 1 */
+	pci_read_config_byte(pdev, ARTIM23, &ctrl);
+	ctrl |= 0x0C;
+	pci_write_config_byte(pdev, ARTIM23, ctrl);
+
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static int cmd640_reinit_one(struct pci_dev *pdev)
+{
+	return ata_pci_device_resume(pdev);
+}
+
+static const struct pci_device_id cmd640[] = {
+	{ PCI_VDEVICE(CMD, 0x640), 0 },
+	{ },
+};
+
+static struct pci_driver cmd640_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= cmd640,
+	.probe 		= cmd640_init_one,
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= cmd640_reinit_one,
+};
+
+static int __init cmd640_init(void)
+{
+	return pci_register_driver(&cmd640_pci_driver);
+}
+
+static void __exit cmd640_exit(void)
+{
+	pci_unregister_driver(&cmd640_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cmd640);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cmd640_init);
+module_exit(cmd640_exit);