Merge branch 'linux-2.6'

1 files changed, 93 insertions, 35 deletions

diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 3cc27b51465..761a66608d7 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -220,6 +220,62 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	timing_setup(ap, adev, 0x40, adev->dma_mode, 4);
 }
 
+/* Both host-side and drive-side detection results are worthless on NV
+ * PATAs.  Ignore them and just follow what BIOS configured.  Both the
+ * current configuration in PCI config reg and ACPI GTM result are
+ * cached during driver attach and are consulted to select transfer
+ * mode.
+ */
+static unsigned long nv_mode_filter(struct ata_device *dev,
+				    unsigned long xfer_mask)
+{
+	static const unsigned int udma_mask_map[] =
+		{ ATA_UDMA2, ATA_UDMA1, ATA_UDMA0, 0,
+		  ATA_UDMA3, ATA_UDMA4, ATA_UDMA5, ATA_UDMA6 };
+	struct ata_port *ap = dev->link->ap;
+	char acpi_str[32] = "";
+	u32 saved_udma, udma;
+	const struct ata_acpi_gtm *gtm;
+	unsigned long bios_limit = 0, acpi_limit = 0, limit;
+
+	/* find out what BIOS configured */
+	udma = saved_udma = (unsigned long)ap->host->private_data;
+
+	if (ap->port_no == 0)
+		udma >>= 16;
+	if (dev->devno == 0)
+		udma >>= 8;
+
+	if ((udma & 0xc0) == 0xc0)
+		bios_limit = ata_pack_xfermask(0, 0, udma_mask_map[udma & 0x7]);
+
+	/* consult ACPI GTM too */
+	gtm = ata_acpi_init_gtm(ap);
+	if (gtm) {
+		acpi_limit = ata_acpi_gtm_xfermask(dev, gtm);
+
+		snprintf(acpi_str, sizeof(acpi_str), " (%u:%u:0x%x)",
+			 gtm->drive[0].dma, gtm->drive[1].dma, gtm->flags);
+	}
+
+	/* be optimistic, EH can take care of things if something goes wrong */
+	limit = bios_limit | acpi_limit;
+
+	/* If PIO or DMA isn't configured at all, don't limit.  Let EH
+	 * handle it.
+	 */
+	if (!(limit & ATA_MASK_PIO))
+		limit |= ATA_MASK_PIO;
+	if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA)))
+		limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA;
+
+	ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
+			"BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",
+			xfer_mask, limit, xfer_mask & limit, bios_limit,
+			saved_udma, acpi_limit, acpi_str);
+
+	return xfer_mask & limit;
+}
 
 /**
  *	nv_probe_init	-	cable detection
@@ -252,31 +308,6 @@ static void nv_error_handler(struct ata_port *ap)
 			       ata_std_postreset);
 }
 
-static int nv_cable_detect(struct ata_port *ap)
-{
-	static const u8 bitmask[2] = {0x03, 0x0C};
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 ata66;
-	u16 udma;
-	int cbl;
-
-	pci_read_config_byte(pdev, 0x52, &ata66);
-	if (ata66 & bitmask[ap->port_no])
-		cbl = ATA_CBL_PATA80;
-	else
-		cbl = ATA_CBL_PATA40;
-
- 	/* We now have to double check because the Nvidia boxes BIOS
- 	   doesn't always set the cable bits but does set mode bits */
- 	pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
- 	if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
-		cbl = ATA_CBL_PATA80;
-	/* And a triple check across suspend/resume with ACPI around */
-	if (ata_acpi_cbl_80wire(ap))
-		cbl = ATA_CBL_PATA80;
-	return cbl;
-}
-
 /**
  *	nv100_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -314,6 +345,14 @@ static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	timing_setup(ap, adev, 0x50, adev->dma_mode, 4);
 }
 
+static void nv_host_stop(struct ata_host *host)
+{
+	u32 udma = (unsigned long)host->private_data;
+
+	/* restore PCI config register 0x60 */
+	pci_write_config_dword(to_pci_dev(host->dev), 0x60, udma);
+}
+
 static struct scsi_host_template amd_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -478,7 +517,8 @@ static struct ata_port_operations nv100_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= nv_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= nv_cable_detect,
+	.cable_detect	= ata_cable_ignore,
+	.mode_filter	= nv_mode_filter,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -495,6 +535,7 @@ static struct ata_port_operations nv100_port_ops = {
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
+	.host_stop	= nv_host_stop,
 };
 
 static struct ata_port_operations nv133_port_ops = {
@@ -511,7 +552,8 @@ static struct ata_port_operations nv133_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= nv_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
-	.cable_detect	= nv_cable_detect,
+	.cable_detect	= ata_cable_ignore,
+	.mode_filter	= nv_mode_filter,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -528,6 +570,7 @@ static struct ata_port_operations nv133_port_ops = {
 	.irq_on		= ata_irq_on,
 
 	.port_start	= ata_sff_port_start,
+	.host_stop	= nv_host_stop,
 };
 
 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -614,7 +657,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &amd100_port_ops
 		}
 	};
-	const struct ata_port_info *ppi[] = { NULL, NULL };
+	struct ata_port_info pi;
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	static int printed_version;
 	int type = id->driver_data;
 	u8 fifo;
@@ -628,6 +672,19 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (type == 1 && pdev->revision > 0x7)
 		type = 2;
 
+	/* Serenade ? */
+	if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
+			 pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
+		type = 6;	/* UDMA 100 only */
+
+	/*
+	 * Okay, type is determined now.  Apply type-specific workarounds.
+	 */
+	pi = info[type];
+
+	if (type < 3)
+		ata_pci_clear_simplex(pdev);
+
 	/* Check for AMD7411 */
 	if (type == 3)
 		/* FIFO is broken */
@@ -635,16 +692,17 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
 
-	/* Serenade ? */
-	if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
-			 pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
-		type = 6;	/* UDMA 100 only */
+	/* Cable detection on Nvidia chips doesn't work too well,
+	 * cache BIOS programmed UDMA mode.
+	 */
+	if (type == 7 || type == 8) {
+		u32 udma;
 
-	if (type < 3)
-		ata_pci_clear_simplex(pdev);
+		pci_read_config_dword(pdev, 0x60, &udma);
+		pi.private_data = (void *)(unsigned long)udma;
+	}
 
 	/* And fire it up */
-	ppi[0] = &info[type];
 	return ata_pci_init_one(pdev, ppi);
 }