diff options
| author | Harvey Harrison <harvey.harrison@gmail.com> | 2008-05-14 16:17:00 -0700 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-05-19 17:30:32 -0400 |
| commit | 07633b5d0723ce2ec31262e1096dcf61311bf078 (patch) | |
| tree | d7df0c597f64b23d684e9cc492c8ee803acf21a2 /drivers/ata/pata_amd.c | |
| parent | 06aaca3f6301d04463b1ee0eb75c0352147159f2 (diff) | |
ata: remove FIT() macro
Use the kernel-provided clamp_val() macro.
FIT was always applied to a member of struct ata_timing (unsigned short)
and two constants. clamp_val will not cast to short anymore.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/pata_amd.c')
| -rw-r--r-- | drivers/ata/pata_amd.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 26665c39648..57dd00f463d 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -84,32 +84,32 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse /* Configure the address set up timing */ pci_read_config_byte(pdev, offset + 0x0C, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(pdev, offset + 0x0C , t); /* Configure the 8bit I/O timing */ pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)), - ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1)); + ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1)); /* Drive timing */ pci_write_config_byte(pdev, offset + 0x08 + (3 - dn), - ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1)); + ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1)); switch (clock) { case 1: - t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03; + t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03; break; case 2: - t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03; + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03; break; case 3: - t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03; + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03; break; case 4: - t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03; + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03; break; default: |