libata: prefer hardreset

When both soft and hard resets are available, libata preferred
softreset till now.  The logic behind it was to be softer to devices;
however, this doesn't really help much.  Rationales for the change:

* BIOS may freeze lock certain things during boot and softreset can't
  unlock those.  This by itself is okay but during operation PHY event
  or other error conditions can trigger hardreset and the device may
  end up with different configuration.

  For example, after a hardreset, previously unlockable HPA can be
  unlocked resulting in different device size and thus revalidation
  failure.  Similar condition can occur during or after resume.

* Certain ATAPI devices require hardreset to recover after certain
  error conditions.  On PATA, this is done by issuing the DEVICE RESET
  command.  On SATA, COMRESET has equivalent effect.  The problem is
  that DEVICE RESET needs its own execution protocol.

  For SFF controllers with bare TF access, it can be easily
  implemented but more advanced controllers (e.g. ahci and sata_sil24)
  require specialized implementations.  Simply using hardreset solves
  the problem nicely.

* COMRESET initialization sequence is the norm in SATA land and many
  SATA devices don't work properly if only SRST is used.  For example,
  some PMPs behave this way and libata works around by always issuing
  hardreset if the host supports PMP.

  Like the above example, libata has developed a number of mechanisms
  aiming to promote softreset to hardreset if softreset is not going
  to work.  This approach is time consuming and error prone.

  Also, note that, dependingon how you read the specs, it could be
  argued that PMP fan-out ports require COMRESET to start operation.
  In fact, all the PMPs on the market except one don't work properly
  if COMRESET is not issued to fan-out ports after PMP reset.

* COMRESET is an integral part of SATA connection and any working
  device should be able to handle COMRESET properly.  After all, it's
  the way to signal hardreset during reboot.  This is the most used
  and recommended (at least by the ahci spec) method of resetting
  devices.

So, this patch makes libata prefer hardreset over softreset by making
the following changes.

* Rename ATA_EH_RESET_MASK to ATA_EH_RESET and use it whereever
  ATA_EH_{SOFT|HARD}RESET used to be used.  ATA_EH_{SOFT|HARD}RESET is
  now only used to tell prereset whether soft or hard reset will be
  issued.

* Strip out now unneeded promote-to-hardreset logics from
  ata_eh_reset(), ata_std_prereset(), sata_pmp_std_prereset() and
  other places.

Signed-off-by: Tejun Heo <htejun@gmail.com>

1 files changed, 35 insertions, 64 deletions

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a5830329eda..f7cae640015 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1079,16 +1079,9 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
 
 	spin_lock_irqsave(ap->lock, flags);
 
-	/* Reset is represented by combination of actions and EHI
-	 * flags.  Suck in all related bits before clearing eh_info to
-	 * avoid losing requested action.
-	 */
-	if (action & ATA_EH_RESET_MASK) {
-		ehc->i.action |= ehi->action & ATA_EH_RESET_MASK;
+	/* suck in and clear reset modifier */
+	if (action & ATA_EH_RESET) {
 		ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK;
-
-		/* make sure all reset actions are cleared & clear EHI flags */
-		action |= ATA_EH_RESET_MASK;
 		ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
 	}
 
@@ -1117,11 +1110,9 @@ void ata_eh_done(struct ata_link *link, struct ata_device *dev,
 {
 	struct ata_eh_context *ehc = &link->eh_context;
 
-	/* if reset is complete, clear all reset actions & reset modifier */
-	if (action & ATA_EH_RESET_MASK) {
-		action |= ATA_EH_RESET_MASK;
+	/* if reset is complete, clear reset modifier */
+	if (action & ATA_EH_RESET)
 		ehc->i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
-	}
 
 	ata_eh_clear_action(link, dev, &ehc->i, action);
 }
@@ -1329,20 +1320,20 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 
 	if (serror & SERR_PERSISTENT) {
 		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 	}
 	if (serror &
 	    (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
 		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 	}
 	if (serror & SERR_PROTOCOL) {
 		err_mask |= AC_ERR_HSM;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 	}
 	if (serror & SERR_INTERNAL) {
 		err_mask |= AC_ERR_SYSTEM;
-		action |= ATA_EH_HARDRESET;
+		action |= ATA_EH_RESET;
 	}
 
 	/* Determine whether a hotplug event has occurred.  Both
@@ -1448,7 +1439,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 
 	if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
 		qc->err_mask |= AC_ERR_HSM;
-		return ATA_EH_SOFTRESET;
+		return ATA_EH_RESET;
 	}
 
 	if (stat & (ATA_ERR | ATA_DF))
@@ -1484,7 +1475,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 	}
 
 	if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_RESET;
 
 	return action;
 }
@@ -1685,7 +1676,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
 		/* speed down SATA link speed if possible */
 		if (sata_down_spd_limit(link) == 0) {
-			action |= ATA_EH_HARDRESET;
+			action |= ATA_EH_RESET;
 			goto done;
 		}
 
@@ -1705,7 +1696,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 			dev->spdn_cnt++;
 
 			if (ata_down_xfermask_limit(dev, sel) == 0) {
-				action |= ATA_EH_SOFTRESET;
+				action |= ATA_EH_RESET;
 				goto done;
 			}
 		}
@@ -1719,7 +1710,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	    (dev->xfer_shift != ATA_SHIFT_PIO)) {
 		if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
 			dev->spdn_cnt = 0;
-			action |= ATA_EH_SOFTRESET;
+			action |= ATA_EH_RESET;
 			goto done;
 		}
 	}
@@ -1764,9 +1755,9 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 		ehc->i.serror |= serror;
 		ata_eh_analyze_serror(link);
 	} else if (rc != -EOPNOTSUPP) {
-		/* SError read failed, force hardreset and probing */
+		/* SError read failed, force reset and probing */
 		ata_ehi_schedule_probe(&ehc->i);
-		ehc->i.action |= ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_RESET;
 		ehc->i.err_mask |= AC_ERR_OTHER;
 	}
 
@@ -1814,7 +1805,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 	/* enforce default EH actions */
 	if (ap->pflags & ATA_PFLAG_FROZEN ||
 	    all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
-		ehc->i.action |= ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_RESET;
 	else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
 		 (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
 		ehc->i.action |= ATA_EH_REVALIDATE;
@@ -2118,7 +2109,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	int try = 0;
 	struct ata_device *dev;
 	unsigned long deadline, now;
-	unsigned int tmp_action;
 	ata_reset_fn_t reset;
 	unsigned long flags;
 	u32 sstatus;
@@ -2129,7 +2119,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ap->pflags |= ATA_PFLAG_RESETTING;
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+	ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 
 	ata_link_for_each_dev(dev, link) {
 		/* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2159,17 +2149,15 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		goto done;
 	}
 
-	/* Determine which reset to use and record in ehc->i.action.
-	 * prereset() may examine and modify it.
-	 */
-	if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
-					 !sata_set_spd_needed(link) &&
-					 !(ehc->i.action & ATA_EH_HARDRESET))))
-		tmp_action = ATA_EH_SOFTRESET;
-	else
-		tmp_action = ATA_EH_HARDRESET;
-
-	ehc->i.action = (ehc->i.action & ~ATA_EH_RESET_MASK) | tmp_action;
+	/* prefer hardreset */
+	ehc->i.action &= ~ATA_EH_RESET;
+	if (hardreset) {
+		reset = hardreset;
+		ehc->i.action = ATA_EH_HARDRESET;
+	} else {
+		reset = softreset;
+		ehc->i.action = ATA_EH_SOFTRESET;
+	}
 
 	if (prereset) {
 		rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
@@ -2177,7 +2165,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			if (rc == -ENOENT) {
 				ata_link_printk(link, KERN_DEBUG,
 						"port disabled. ignoring.\n");
-				ehc->i.action &= ~ATA_EH_RESET_MASK;
+				ehc->i.action &= ~ATA_EH_RESET;
 
 				ata_link_for_each_dev(dev, link)
 					classes[dev->devno] = ATA_DEV_NONE;
@@ -2190,12 +2178,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		}
 	}
 
-	/* prereset() might have modified ehc->i.action */
-	if (ehc->i.action & ATA_EH_HARDRESET)
-		reset = hardreset;
-	else if (ehc->i.action & ATA_EH_SOFTRESET)
-		reset = softreset;
-	else {
+	/* prereset() might have cleared ATA_EH_RESET */
+	if (!(ehc->i.action & ATA_EH_RESET)) {
 		/* prereset told us not to reset, bang classes and return */
 		ata_link_for_each_dev(dev, link)
 			classes[dev->devno] = ATA_DEV_NONE;
@@ -2203,14 +2187,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		goto out;
 	}
 
-	/* did prereset() screw up?  if so, fix up to avoid oopsing */
-	if (!reset) {
-		if (softreset)
-			reset = softreset;
-		else
-			reset = hardreset;
-	}
-
  retry:
 	deadline = jiffies + ata_eh_reset_timeouts[try++];
 
@@ -2240,7 +2216,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			goto fail;
 		}
 
-		ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
+		ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 		rc = ata_do_reset(link, reset, classes, deadline);
 	}
 
@@ -2290,7 +2266,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		postreset(link, classes);
 
 	/* reset successful, schedule revalidation */
-	ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+	ata_eh_done(link, NULL, ATA_EH_RESET);
 	ehc->i.action |= ATA_EH_REVALIDATE;
 
 	rc = 0;
@@ -2548,7 +2524,7 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
 	ata_eh_detach_dev(dev);
 	ata_dev_init(dev);
 	ehc->did_probe_mask |= (1 << dev->devno);
-	ehc->i.action |= ATA_EH_SOFTRESET;
+	ehc->i.action |= ATA_EH_RESET;
 	ehc->saved_xfer_mode[dev->devno] = 0;
 	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
@@ -2592,12 +2568,7 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 
 		return 1;
 	} else {
-		/* soft didn't work?  be haaaaard */
-		if (ehc->i.flags & ATA_EHI_DID_RESET)
-			ehc->i.action |= ATA_EH_HARDRESET;
-		else
-			ehc->i.action |= ATA_EH_SOFTRESET;
-
+		ehc->i.action |= ATA_EH_RESET;
 		return 0;
 	}
 }
@@ -2690,7 +2661,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 			ehc->i.action = 0;
 
 		/* do we need to reset? */
-		if (ehc->i.action & ATA_EH_RESET_MASK)
+		if (ehc->i.action & ATA_EH_RESET)
 			reset = 1;
 
 		ata_link_for_each_dev(dev, link)
@@ -2708,7 +2679,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		ata_port_for_each_link(link, ap) {
 			struct ata_eh_context *ehc = &link->eh_context;
 
-			if (!(ehc->i.action & ATA_EH_RESET_MASK))
+			if (!(ehc->i.action & ATA_EH_RESET))
 				continue;
 
 			rc = ata_eh_reset(link, ata_link_nr_vacant(link),