Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  intel_idle: open broadcast clock event
  cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specific
  cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idle
  cpuidle: delete unused CPUIDLE_FLAG_SHALLOW, BALANCED, DEEP definitions
  SH, cpuidle: delete use of NOP CPUIDLE_FLAGS_SHALLOW
  cpuidle: delete NOP CPUIDLE_FLAG_POLL
  ACPI: processor_idle: delete use of NOP CPUIDLE_FLAGs
  cpuidle: Rename X86 specific idle poll state[0] from C0 to POLL
  ACPI, intel_idle: Cleanup idle= internal variables
  cpuidle: Make cpuidle_enable_device() call poll_idle_init()
  intel_idle: update Sandy Bridge core C-state residency targets

2 files changed, 13 insertions, 19 deletions

diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index bec561c14be..3c1a2fec8cd 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -23,7 +23,7 @@ static int set_no_mwait(const struct dmi_system_id *id)
 {
 	printk(KERN_NOTICE PREFIX "%s detected - "
 		"disabling mwait for CPU C-states\n", id->ident);
-	idle_nomwait = 1;
+	boot_option_idle_override = IDLE_NOMWAIT;
 	return 0;
 }
 
@@ -283,7 +283,7 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in)
 {
 	acpi_status status = AE_OK;
 
-	if (idle_nomwait) {
+	if (boot_option_idle_override == IDLE_NOMWAIT) {
 		/*
 		 * If mwait is disabled for CPU C-states, the C2C3_FFH access
 		 * mode will be disabled in the parameter of _PDC object.
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index a765b823aa9..d615b7d69bc 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -79,6 +79,13 @@ module_param(bm_check_disable, uint, 0000);
 static unsigned int latency_factor __read_mostly = 2;
 module_param(latency_factor, uint, 0644);
 
+static int disabled_by_idle_boot_param(void)
+{
+	return boot_option_idle_override == IDLE_POLL ||
+		boot_option_idle_override == IDLE_FORCE_MWAIT ||
+		boot_option_idle_override == IDLE_HALT;
+}
+
 /*
  * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
  * For now disable this. Probably a bug somewhere else.
@@ -455,7 +462,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
 				continue;
 			}
 			if (cx.type == ACPI_STATE_C1 &&
-					(idle_halt || idle_nomwait)) {
+			    (boot_option_idle_override == IDLE_NOMWAIT)) {
 				/*
 				 * In most cases the C1 space_id obtained from
 				 * _CST object is FIXED_HARDWARE access mode.
@@ -1016,7 +1023,6 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
 		state->flags = 0;
 		switch (cx->type) {
 			case ACPI_STATE_C1:
-			state->flags |= CPUIDLE_FLAG_SHALLOW;
 			if (cx->entry_method == ACPI_CSTATE_FFH)
 				state->flags |= CPUIDLE_FLAG_TIME_VALID;
 
@@ -1025,16 +1031,13 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
 			break;
 
 			case ACPI_STATE_C2:
-			state->flags |= CPUIDLE_FLAG_BALANCED;
 			state->flags |= CPUIDLE_FLAG_TIME_VALID;
 			state->enter = acpi_idle_enter_simple;
 			dev->safe_state = state;
 			break;
 
 			case ACPI_STATE_C3:
-			state->flags |= CPUIDLE_FLAG_DEEP;
 			state->flags |= CPUIDLE_FLAG_TIME_VALID;
-			state->flags |= CPUIDLE_FLAG_CHECK_BM;
 			state->enter = pr->flags.bm_check ?
 					acpi_idle_enter_bm :
 					acpi_idle_enter_simple;
@@ -1058,7 +1061,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
 {
 	int ret = 0;
 
-	if (boot_option_idle_override)
+	if (disabled_by_idle_boot_param())
 		return 0;
 
 	if (!pr)
@@ -1089,19 +1092,10 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
 	acpi_status status = 0;
 	static int first_run;
 
-	if (boot_option_idle_override)
+	if (disabled_by_idle_boot_param())
 		return 0;
 
 	if (!first_run) {
-		if (idle_halt) {
-			/*
-			 * When the boot option of "idle=halt" is added, halt
-			 * is used for CPU IDLE.
-			 * In such case C2/C3 is meaningless. So the max_cstate
-			 * is set to one.
-			 */
-			max_cstate = 1;
-		}
 		dmi_check_system(processor_power_dmi_table);
 		max_cstate = acpi_processor_cstate_check(max_cstate);
 		if (max_cstate < ACPI_C_STATES_MAX)
@@ -1142,7 +1136,7 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
 int acpi_processor_power_exit(struct acpi_processor *pr,
 			      struct acpi_device *device)
 {
-	if (boot_option_idle_override)
+	if (disabled_by_idle_boot_param())
 		return 0;
 
 	cpuidle_unregister_device(&pr->power.dev);