ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 0 insertions, 752 deletions

diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c
deleted file mode 100644
index 852f3a83b2e..00000000000
--- a/drivers/acpi/parser/psargs.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/******************************************************************************
- *
- * Module Name: psargs - Parse AML opcode arguments
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acparser.h>
-#include <acpi/amlcode.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acdispat.h>
-
-#define _COMPONENT          ACPI_PARSER
-ACPI_MODULE_NAME("psargs")
-
-/* Local prototypes */
-static u32
-acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state);
-
-static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
-						       *parser_state);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_package_length
- *
- * PARAMETERS:  parser_state        - Current parser state object
- *
- * RETURN:      Decoded package length. On completion, the AML pointer points
- *              past the length byte or bytes.
- *
- * DESCRIPTION: Decode and return a package length field.
- *              Note: Largest package length is 28 bits, from ACPI specification
- *
- ******************************************************************************/
-
-static u32
-acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state)
-{
-	u8 *aml = parser_state->aml;
-	u32 package_length = 0;
-	u32 byte_count;
-	u8 byte_zero_mask = 0x3F;	/* Default [0:5] */
-
-	ACPI_FUNCTION_TRACE(ps_get_next_package_length);
-
-	/*
-	 * Byte 0 bits [6:7] contain the number of additional bytes
-	 * used to encode the package length, either 0,1,2, or 3
-	 */
-	byte_count = (aml[0] >> 6);
-	parser_state->aml += ((acpi_size) byte_count + 1);
-
-	/* Get bytes 3, 2, 1 as needed */
-
-	while (byte_count) {
-		/*
-		 * Final bit positions for the package length bytes:
-		 *      Byte3->[20:27]
-		 *      Byte2->[12:19]
-		 *      Byte1->[04:11]
-		 *      Byte0->[00:03]
-		 */
-		package_length |= (aml[byte_count] << ((byte_count << 3) - 4));
-
-		byte_zero_mask = 0x0F;	/* Use bits [0:3] of byte 0 */
-		byte_count--;
-	}
-
-	/* Byte 0 is a special case, either bits [0:3] or [0:5] are used */
-
-	package_length |= (aml[0] & byte_zero_mask);
-	return_UINT32(package_length);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_package_end
- *
- * PARAMETERS:  parser_state        - Current parser state object
- *
- * RETURN:      Pointer to end-of-package +1
- *
- * DESCRIPTION: Get next package length and return a pointer past the end of
- *              the package.  Consumes the package length field
- *
- ******************************************************************************/
-
-u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state)
-{
-	u8 *start = parser_state->aml;
-	u32 package_length;
-
-	ACPI_FUNCTION_TRACE(ps_get_next_package_end);
-
-	/* Function below updates parser_state->Aml */
-
-	package_length = acpi_ps_get_next_package_length(parser_state);
-
-	return_PTR(start + package_length);	/* end of package */
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_namestring
- *
- * PARAMETERS:  parser_state        - Current parser state object
- *
- * RETURN:      Pointer to the start of the name string (pointer points into
- *              the AML.
- *
- * DESCRIPTION: Get next raw namestring within the AML stream.  Handles all name
- *              prefix characters.  Set parser state to point past the string.
- *              (Name is consumed from the AML.)
- *
- ******************************************************************************/
-
-char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
-{
-	u8 *start = parser_state->aml;
-	u8 *end = parser_state->aml;
-
-	ACPI_FUNCTION_TRACE(ps_get_next_namestring);
-
-	/* Point past any namestring prefix characters (backslash or carat) */
-
-	while (acpi_ps_is_prefix_char(*end)) {
-		end++;
-	}
-
-	/* Decode the path prefix character */
-
-	switch (*end) {
-	case 0:
-
-		/* null_name */
-
-		if (end == start) {
-			start = NULL;
-		}
-		end++;
-		break;
-
-	case AML_DUAL_NAME_PREFIX:
-
-		/* Two name segments */
-
-		end += 1 + (2 * ACPI_NAME_SIZE);
-		break;
-
-	case AML_MULTI_NAME_PREFIX_OP:
-
-		/* Multiple name segments, 4 chars each, count in next byte */
-
-		end += 2 + (*(end + 1) * ACPI_NAME_SIZE);
-		break;
-
-	default:
-
-		/* Single name segment */
-
-		end += ACPI_NAME_SIZE;
-		break;
-	}
-
-	parser_state->aml = end;
-	return_PTR((char *)start);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_namepath
- *
- * PARAMETERS:  parser_state        - Current parser state object
- *              Arg                 - Where the namepath will be stored
- *              arg_count           - If the namepath points to a control method
- *                                    the method's argument is returned here.
- *              possible_method_call - Whether the namepath can possibly be the
- *                                    start of a method call
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get next name (if method call, return # of required args).
- *              Names are looked up in the internal namespace to determine
- *              if the name represents a control method.  If a method
- *              is found, the number of arguments to the method is returned.
- *              This information is critical for parsing to continue correctly.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
-			  struct acpi_parse_state *parser_state,
-			  union acpi_parse_object *arg, u8 possible_method_call)
-{
-	acpi_status status;
-	char *path;
-	union acpi_parse_object *name_op;
-	union acpi_operand_object *method_desc;
-	struct acpi_namespace_node *node;
-	u8 *start = parser_state->aml;
-
-	ACPI_FUNCTION_TRACE(ps_get_next_namepath);
-
-	path = acpi_ps_get_next_namestring(parser_state);
-	acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
-
-	/* Null path case is allowed, just exit */
-
-	if (!path) {
-		arg->common.value.name = path;
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/*
-	 * Lookup the name in the internal namespace, starting with the current
-	 * scope. We don't want to add anything new to the namespace here,
-	 * however, so we use MODE_EXECUTE.
-	 * Allow searching of the parent tree, but don't open a new scope -
-	 * we just want to lookup the object (must be mode EXECUTE to perform
-	 * the upsearch)
-	 */
-	status = acpi_ns_lookup(walk_state->scope_info, path,
-				ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
-				ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
-				NULL, &node);
-
-	/*
-	 * If this name is a control method invocation, we must
-	 * setup the method call
-	 */
-	if (ACPI_SUCCESS(status) &&
-	    possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
-		if (walk_state->opcode == AML_UNLOAD_OP) {
-			/*
-			 * acpi_ps_get_next_namestring has increased the AML pointer,
-			 * so we need to restore the saved AML pointer for method call.
-			 */
-			walk_state->parser_state.aml = start;
-			walk_state->arg_count = 1;
-			acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
-			return_ACPI_STATUS(AE_OK);
-		}
-
-		/* This name is actually a control method invocation */
-
-		method_desc = acpi_ns_get_attached_object(node);
-		ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
-				  "Control Method - %p Desc %p Path=%p\n", node,
-				  method_desc, path));
-
-		name_op = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
-		if (!name_op) {
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-
-		/* Change Arg into a METHOD CALL and attach name to it */
-
-		acpi_ps_init_op(arg, AML_INT_METHODCALL_OP);
-		name_op->common.value.name = path;
-
-		/* Point METHODCALL/NAME to the METHOD Node */
-
-		name_op->common.node = node;
-		acpi_ps_append_arg(arg, name_op);
-
-		if (!method_desc) {
-			ACPI_ERROR((AE_INFO,
-				    "Control Method %p has no attached object",
-				    node));
-			return_ACPI_STATUS(AE_AML_INTERNAL);
-		}
-
-		ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
-				  "Control Method - %p Args %X\n",
-				  node, method_desc->method.param_count));
-
-		/* Get the number of arguments to expect */
-
-		walk_state->arg_count = method_desc->method.param_count;
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/*
-	 * Special handling if the name was not found during the lookup -
-	 * some not_found cases are allowed
-	 */
-	if (status == AE_NOT_FOUND) {
-
-		/* 1) not_found is ok during load pass 1/2 (allow forward references) */
-
-		if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) !=
-		    ACPI_PARSE_EXECUTE) {
-			status = AE_OK;
-		}
-
-		/* 2) not_found during a cond_ref_of(x) is ok by definition */
-
-		else if (walk_state->op->common.aml_opcode ==
-			 AML_COND_REF_OF_OP) {
-			status = AE_OK;
-		}
-
-		/*
-		 * 3) not_found while building a Package is ok at this point, we
-		 * may flag as an error later if slack mode is not enabled.
-		 * (Some ASL code depends on allowing this behavior)
-		 */
-		else if ((arg->common.parent) &&
-			 ((arg->common.parent->common.aml_opcode ==
-			   AML_PACKAGE_OP)
-			  || (arg->common.parent->common.aml_opcode ==
-			      AML_VAR_PACKAGE_OP))) {
-			status = AE_OK;
-		}
-	}
-
-	/* Final exception check (may have been changed from code above) */
-
-	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR_NAMESPACE(path, status);
-
-		if ((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
-		    ACPI_PARSE_EXECUTE) {
-
-			/* Report a control method execution error */
-
-			status = acpi_ds_method_error(status, walk_state);
-		}
-	}
-
-	/* Save the namepath */
-
-	arg->common.value.name = path;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_simple_arg
- *
- * PARAMETERS:  parser_state        - Current parser state object
- *              arg_type            - The argument type (AML_*_ARG)
- *              Arg                 - Where the argument is returned
- *
- * RETURN:      None
- *
- * DESCRIPTION: Get the next simple argument (constant, string, or namestring)
- *
- ******************************************************************************/
-
-void
-acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
-			    u32 arg_type, union acpi_parse_object *arg)
-{
-	u32 length;
-	u16 opcode;
-	u8 *aml = parser_state->aml;
-
-	ACPI_FUNCTION_TRACE_U32(ps_get_next_simple_arg, arg_type);
-
-	switch (arg_type) {
-	case ARGP_BYTEDATA:
-
-		/* Get 1 byte from the AML stream */
-
-		opcode = AML_BYTE_OP;
-		arg->common.value.integer = (acpi_integer) * aml;
-		length = 1;
-		break;
-
-	case ARGP_WORDDATA:
-
-		/* Get 2 bytes from the AML stream */
-
-		opcode = AML_WORD_OP;
-		ACPI_MOVE_16_TO_64(&arg->common.value.integer, aml);
-		length = 2;
-		break;
-
-	case ARGP_DWORDDATA:
-
-		/* Get 4 bytes from the AML stream */
-
-		opcode = AML_DWORD_OP;
-		ACPI_MOVE_32_TO_64(&arg->common.value.integer, aml);
-		length = 4;
-		break;
-
-	case ARGP_QWORDDATA:
-
-		/* Get 8 bytes from the AML stream */
-
-		opcode = AML_QWORD_OP;
-		ACPI_MOVE_64_TO_64(&arg->common.value.integer, aml);
-		length = 8;
-		break;
-
-	case ARGP_CHARLIST:
-
-		/* Get a pointer to the string, point past the string */
-
-		opcode = AML_STRING_OP;
-		arg->common.value.string = ACPI_CAST_PTR(char, aml);
-
-		/* Find the null terminator */
-
-		length = 0;
-		while (aml[length]) {
-			length++;
-		}
-		length++;
-		break;
-
-	case ARGP_NAME:
-	case ARGP_NAMESTRING:
-
-		acpi_ps_init_op(arg, AML_INT_NAMEPATH_OP);
-		arg->common.value.name =
-		    acpi_ps_get_next_namestring(parser_state);
-		return_VOID;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Invalid ArgType %X", arg_type));
-		return_VOID;
-	}
-
-	acpi_ps_init_op(arg, opcode);
-	parser_state->aml += length;
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_field
- *
- * PARAMETERS:  parser_state        - Current parser state object
- *
- * RETURN:      A newly allocated FIELD op
- *
- * DESCRIPTION: Get next field (named_field, reserved_field, or access_field)
- *
- ******************************************************************************/
-
-static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
-						       *parser_state)
-{
-	u32 aml_offset = (u32)
-	    ACPI_PTR_DIFF(parser_state->aml,
-			  parser_state->aml_start);
-	union acpi_parse_object *field;
-	u16 opcode;
-	u32 name;
-
-	ACPI_FUNCTION_TRACE(ps_get_next_field);
-
-	/* Determine field type */
-
-	switch (ACPI_GET8(parser_state->aml)) {
-	default:
-
-		opcode = AML_INT_NAMEDFIELD_OP;
-		break;
-
-	case 0x00:
-
-		opcode = AML_INT_RESERVEDFIELD_OP;
-		parser_state->aml++;
-		break;
-
-	case 0x01:
-
-		opcode = AML_INT_ACCESSFIELD_OP;
-		parser_state->aml++;
-		break;
-	}
-
-	/* Allocate a new field op */
-
-	field = acpi_ps_alloc_op(opcode);
-	if (!field) {
-		return_PTR(NULL);
-	}
-
-	field->common.aml_offset = aml_offset;
-
-	/* Decode the field type */
-
-	switch (opcode) {
-	case AML_INT_NAMEDFIELD_OP:
-
-		/* Get the 4-character name */
-
-		ACPI_MOVE_32_TO_32(&name, parser_state->aml);
-		acpi_ps_set_name(field, name);
-		parser_state->aml += ACPI_NAME_SIZE;
-
-		/* Get the length which is encoded as a package length */
-
-		field->common.value.size =
-		    acpi_ps_get_next_package_length(parser_state);
-		break;
-
-	case AML_INT_RESERVEDFIELD_OP:
-
-		/* Get the length which is encoded as a package length */
-
-		field->common.value.size =
-		    acpi_ps_get_next_package_length(parser_state);
-		break;
-
-	case AML_INT_ACCESSFIELD_OP:
-
-		/*
-		 * Get access_type and access_attrib and merge into the field Op
-		 * access_type is first operand, access_attribute is second
-		 */
-		field->common.value.integer =
-		    (((u32) ACPI_GET8(parser_state->aml) << 8));
-		parser_state->aml++;
-		field->common.value.integer |= ACPI_GET8(parser_state->aml);
-		parser_state->aml++;
-		break;
-
-	default:
-
-		/* Opcode was set in previous switch */
-		break;
-	}
-
-	return_PTR(field);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ps_get_next_arg
- *
- * PARAMETERS:  walk_state          - Current state
- *              parser_state        - Current parser state object
- *              arg_type            - The argument type (AML_*_ARG)
- *              return_arg          - Where the next arg is returned
- *
- * RETURN:      Status, and an op object containing the next argument.
- *
- * DESCRIPTION: Get next argument (including complex list arguments that require
- *              pushing the parser stack)
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
-		     struct acpi_parse_state *parser_state,
-		     u32 arg_type, union acpi_parse_object **return_arg)
-{
-	union acpi_parse_object *arg = NULL;
-	union acpi_parse_object *prev = NULL;
-	union acpi_parse_object *field;
-	u32 subop;
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE_PTR(ps_get_next_arg, parser_state);
-
-	switch (arg_type) {
-	case ARGP_BYTEDATA:
-	case ARGP_WORDDATA:
-	case ARGP_DWORDDATA:
-	case ARGP_CHARLIST:
-	case ARGP_NAME:
-	case ARGP_NAMESTRING:
-
-		/* Constants, strings, and namestrings are all the same size */
-
-		arg = acpi_ps_alloc_op(AML_BYTE_OP);
-		if (!arg) {
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-		acpi_ps_get_next_simple_arg(parser_state, arg_type, arg);
-		break;
-
-	case ARGP_PKGLENGTH:
-
-		/* Package length, nothing returned */
-
-		parser_state->pkg_end =
-		    acpi_ps_get_next_package_end(parser_state);
-		break;
-
-	case ARGP_FIELDLIST:
-
-		if (parser_state->aml < parser_state->pkg_end) {
-
-			/* Non-empty list */
-
-			while (parser_state->aml < parser_state->pkg_end) {
-				field = acpi_ps_get_next_field(parser_state);
-				if (!field) {
-					return_ACPI_STATUS(AE_NO_MEMORY);
-				}
-
-				if (prev) {
-					prev->common.next = field;
-				} else {
-					arg = field;
-				}
-				prev = field;
-			}
-
-			/* Skip to End of byte data */
-
-			parser_state->aml = parser_state->pkg_end;
-		}
-		break;
-
-	case ARGP_BYTELIST:
-
-		if (parser_state->aml < parser_state->pkg_end) {
-
-			/* Non-empty list */
-
-			arg = acpi_ps_alloc_op(AML_INT_BYTELIST_OP);
-			if (!arg) {
-				return_ACPI_STATUS(AE_NO_MEMORY);
-			}
-
-			/* Fill in bytelist data */
-
-			arg->common.value.size = (u32)
-			    ACPI_PTR_DIFF(parser_state->pkg_end,
-					  parser_state->aml);
-			arg->named.data = parser_state->aml;
-
-			/* Skip to End of byte data */
-
-			parser_state->aml = parser_state->pkg_end;
-		}
-		break;
-
-	case ARGP_TARGET:
-	case ARGP_SUPERNAME:
-	case ARGP_SIMPLENAME:
-
-		subop = acpi_ps_peek_opcode(parser_state);
-		if (subop == 0 ||
-		    acpi_ps_is_leading_char(subop) ||
-		    acpi_ps_is_prefix_char(subop)) {
-
-			/* null_name or name_string */
-
-			arg = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
-			if (!arg) {
-				return_ACPI_STATUS(AE_NO_MEMORY);
-			}
-
-			/* To support super_name arg of Unload */
-
-			if (walk_state->opcode == AML_UNLOAD_OP) {
-				status =
-				    acpi_ps_get_next_namepath(walk_state,
-							      parser_state, arg,
-							      1);
-
-				/*
-				 * If the super_name arg of Unload is a method call,
-				 * we have restored the AML pointer, just free this Arg
-				 */
-				if (arg->common.aml_opcode ==
-				    AML_INT_METHODCALL_OP) {
-					acpi_ps_free_op(arg);
-					arg = NULL;
-				}
-			} else {
-				status =
-				    acpi_ps_get_next_namepath(walk_state,
-							      parser_state, arg,
-							      0);
-			}
-		} else {
-			/* Single complex argument, nothing returned */
-
-			walk_state->arg_count = 1;
-		}
-		break;
-
-	case ARGP_DATAOBJ:
-	case ARGP_TERMARG:
-
-		/* Single complex argument, nothing returned */
-
-		walk_state->arg_count = 1;
-		break;
-
-	case ARGP_DATAOBJLIST:
-	case ARGP_TERMLIST:
-	case ARGP_OBJLIST:
-
-		if (parser_state->aml < parser_state->pkg_end) {
-
-			/* Non-empty list of variable arguments, nothing returned */
-
-			walk_state->arg_count = ACPI_VAR_ARGS;
-		}
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Invalid ArgType: %X", arg_type));
-		status = AE_AML_OPERAND_TYPE;
-		break;
-	}
-
-	*return_arg = arg;
-	return_ACPI_STATUS(status);
-}