ACPI: add support for Smart Battery

Most batteries today are ACPI "Control Method" batteries,
but some models ship with the older "Smart Battery"
that requires this code.

Rich Townsend and Bruno Ducrot were the original authors.
Vladimir Lebedev updated to run on latest kernel.

http://bugzilla.kernel.org/show_bug.cgi?id=3734

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 420 insertions, 0 deletions

diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c
new file mode 100644
index 00000000000..72478a665c8
--- /dev/null
+++ b/drivers/acpi/i2c_ec.c
@@ -0,0 +1,420 @@
+/*
+ * SMBus driver for ACPI Embedded Controller ($Revision: 1.3 $)
+ *
+ * Copyright (c) 2002, 2005 Ducrot Bruno
+ * Copyright (c) 2005 Rich Townsend (tiny hacks & tweaks)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+
+#include "i2c_ec.h"
+
+#define	xudelay(t)	udelay(t)
+#define	xmsleep(t)	msleep(t)
+
+#define ACPI_EC_HC_COMPONENT	0x00080000
+#define ACPI_EC_HC_CLASS	"ec_hc_smbus"
+#define ACPI_EC_HC_HID		"ACPI0001"
+#define ACPI_EC_HC_DRIVER_NAME	"ACPI EC HC smbus driver"
+#define ACPI_EC_HC_DEVICE_NAME	"EC HC smbus"
+
+#define _COMPONENT		ACPI_EC_HC_COMPONENT
+
+ACPI_MODULE_NAME("acpi_smbus")
+
+static int acpi_ec_hc_add(struct acpi_device *device);
+static int acpi_ec_hc_remove(struct acpi_device *device, int type);
+
+static struct acpi_driver acpi_ec_hc_driver = {
+	.name = ACPI_EC_HC_DRIVER_NAME,
+	.class = ACPI_EC_HC_CLASS,
+	.ids = ACPI_EC_HC_HID,
+	.ops = {
+		.add = acpi_ec_hc_add,
+		.remove = acpi_ec_hc_remove,
+		},
+};
+
+/* Various bit mask for EC_SC (R) */
+#define OBF		0x01
+#define IBF		0x02
+#define CMD		0x08
+#define BURST		0x10
+#define SCI_EVT		0x20
+#define SMI_EVT		0x40
+
+/* Commands for EC_SC (W) */
+#define RD_EC		0x80
+#define WR_EC		0x81
+#define BE_EC		0x82
+#define BD_EC		0x83
+#define QR_EC		0x84
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+
+#define ACPI_EC_SMB_PRTCL	0x00	/* protocol, PEC */
+#define ACPI_EC_SMB_STS		0x01	/* status */
+#define ACPI_EC_SMB_ADDR	0x02	/* address */
+#define ACPI_EC_SMB_CMD		0x03	/* command */
+#define ACPI_EC_SMB_DATA	0x04	/* 32 data registers */
+#define ACPI_EC_SMB_BCNT	0x24	/* number of data bytes */
+#define ACPI_EC_SMB_ALRM_A	0x25	/* alarm address */
+#define ACPI_EC_SMB_ALRM_D	0x26	/* 2 bytes alarm data */
+
+#define ACPI_EC_SMB_STS_DONE	0x80
+#define ACPI_EC_SMB_STS_ALRM	0x40
+#define ACPI_EC_SMB_STS_RES	0x20
+#define ACPI_EC_SMB_STS_STATUS	0x1f
+
+#define ACPI_EC_SMB_STATUS_OK		0x00
+#define ACPI_EC_SMB_STATUS_FAIL		0x07
+#define ACPI_EC_SMB_STATUS_DNAK		0x10
+#define ACPI_EC_SMB_STATUS_DERR		0x11
+#define ACPI_EC_SMB_STATUS_CMD_DENY	0x12
+#define ACPI_EC_SMB_STATUS_UNKNOWN	0x13
+#define ACPI_EC_SMB_STATUS_ACC_DENY	0x17
+#define ACPI_EC_SMB_STATUS_TIMEOUT	0x18
+#define ACPI_EC_SMB_STATUS_NOTSUP	0x19
+#define ACPI_EC_SMB_STATUS_BUSY		0x1A
+#define ACPI_EC_SMB_STATUS_PEC		0x1F
+
+#define ACPI_EC_SMB_PRTCL_WRITE			0x00
+#define ACPI_EC_SMB_PRTCL_READ			0x01
+#define ACPI_EC_SMB_PRTCL_QUICK			0x02
+#define ACPI_EC_SMB_PRTCL_BYTE			0x04
+#define ACPI_EC_SMB_PRTCL_BYTE_DATA		0x06
+#define ACPI_EC_SMB_PRTCL_WORD_DATA		0x08
+#define ACPI_EC_SMB_PRTCL_BLOCK_DATA		0x0a
+#define ACPI_EC_SMB_PRTCL_PROC_CALL		0x0c
+#define ACPI_EC_SMB_PRTCL_BLOCK_PROC_CALL	0x0d
+#define ACPI_EC_SMB_PRTCL_I2C_BLOCK_DATA	0x4a
+#define ACPI_EC_SMB_PRTCL_PEC			0x80
+
+/* Length of pre/post transaction sleep (msec) */
+#define ACPI_EC_SMB_TRANSACTION_SLEEP		1
+#define ACPI_EC_SMB_ACCESS_SLEEP1		1
+#define ACPI_EC_SMB_ACCESS_SLEEP2		10
+
+static int acpi_ec_smb_read(struct acpi_ec_smbus *smbus, u8 address, u8 * data)
+{
+	u8 val;
+	int err;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_smb_read");
+
+	err = ec_read(smbus->base + address, &val);
+	if (!err) {
+		*data = val;
+	}
+	xmsleep(ACPI_EC_SMB_TRANSACTION_SLEEP);
+	return (err);
+}
+
+static int acpi_ec_smb_write(struct acpi_ec_smbus *smbus, u8 address, u8 data)
+{
+	int err;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_smb_write");
+
+	err = ec_write(smbus->base + address, data);
+	return (err);
+}
+
+static int
+acpi_ec_smb_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+		   char read_write, u8 command, int size,
+		   union i2c_smbus_data *data)
+{
+	struct acpi_ec_smbus *smbus = adap->algo_data;
+	unsigned char protocol, len = 0, pec, temp[2] = { 0, 0 };
+	int i;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_smb_access");
+
+	if (read_write == I2C_SMBUS_READ) {
+		protocol = ACPI_EC_SMB_PRTCL_READ;
+	} else {
+		protocol = ACPI_EC_SMB_PRTCL_WRITE;
+	}
+	pec = (flags & I2C_CLIENT_PEC) ? ACPI_EC_SMB_PRTCL_PEC : 0;
+
+	switch (size) {
+
+	case I2C_SMBUS_QUICK:
+		protocol |= ACPI_EC_SMB_PRTCL_QUICK;
+		read_write = I2C_SMBUS_WRITE;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE) {
+			acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->byte);
+		}
+		protocol |= ACPI_EC_SMB_PRTCL_BYTE;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->byte);
+		}
+		protocol |= ACPI_EC_SMB_PRTCL_BYTE_DATA;
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->word);
+			acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + 1,
+					  data->word >> 8);
+		}
+		protocol |= ACPI_EC_SMB_PRTCL_WORD_DATA | pec;
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = min_t(u8, data->block[0], 32);
+			acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len);
+			for (i = 0; i < len; i++)
+				acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i,
+						  data->block[i + 1]);
+		}
+		protocol |= ACPI_EC_SMB_PRTCL_BLOCK_DATA | pec;
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		len = min_t(u8, data->block[0], 32);
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len);
+		if (read_write == I2C_SMBUS_WRITE) {
+			for (i = 0; i < len; i++) {
+				acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i,
+						  data->block[i + 1]);
+			}
+		}
+		protocol |= ACPI_EC_SMB_PRTCL_I2C_BLOCK_DATA;
+		break;
+
+	case I2C_SMBUS_PROC_CALL:
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->word);
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + 1, data->word >> 8);
+		protocol = ACPI_EC_SMB_PRTCL_PROC_CALL | pec;
+		read_write = I2C_SMBUS_READ;
+		break;
+
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		protocol |= pec;
+		len = min_t(u8, data->block[0], 31);
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command);
+		acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len);
+		for (i = 0; i < len; i++)
+			acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i,
+					  data->block[i + 1]);
+		protocol = ACPI_EC_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+		read_write = I2C_SMBUS_READ;
+		break;
+
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_WARN, "EC SMBus adapter: "
+				  "Unsupported transaction %d\n", size));
+		return (-1);
+	}
+
+	acpi_ec_smb_write(smbus, ACPI_EC_SMB_ADDR, addr << 1);
+	acpi_ec_smb_write(smbus, ACPI_EC_SMB_PRTCL, protocol);
+
+	acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0);
+
+	if (~temp[0] & ACPI_EC_SMB_STS_DONE) {
+		xudelay(500);
+		acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0);
+	}
+	if (~temp[0] & ACPI_EC_SMB_STS_DONE) {
+		xmsleep(ACPI_EC_SMB_ACCESS_SLEEP2);
+		acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0);
+	}
+	if ((~temp[0] & ACPI_EC_SMB_STS_DONE)
+	    || (temp[0] & ACPI_EC_SMB_STS_STATUS)) {
+		return (-1);
+	}
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		return (0);
+	}
+
+	switch (size) {
+
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA, &data->byte);
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA, temp + 0);
+		acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA + 1, temp + 1);
+		data->word = (temp[1] << 8) | temp[0];
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		len = 0;
+		acpi_ec_smb_read(smbus, ACPI_EC_SMB_BCNT, &len);
+		len = min_t(u8, len, 32);
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		for (i = 0; i < len; i++)
+			acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA + i,
+					 data->block + i + 1);
+		data->block[0] = len;
+		break;
+	}
+
+	return (0);
+}
+
+static u32 acpi_ec_smb_func(struct i2c_adapter *adapter)
+{
+	ACPI_FUNCTION_TRACE("acpi_ec_smb_func");
+
+	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA |
+		I2C_FUNC_SMBUS_PROC_CALL |
+		I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC);
+}
+
+static struct i2c_algorithm acpi_ec_smbus_algorithm = {
+	.smbus_xfer = acpi_ec_smb_access,
+	.functionality = acpi_ec_smb_func,
+};
+
+static int acpi_ec_hc_add(struct acpi_device *device)
+{
+	int status;
+	unsigned long val;
+	struct acpi_ec_hc *ec_hc;
+	struct acpi_ec_smbus *smbus;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_hc_add");
+
+	if (!device) {
+		return_VALUE(-EINVAL);
+	}
+
+	ec_hc = kmalloc(sizeof(struct acpi_ec_hc), GFP_KERNEL);
+	if (!ec_hc) {
+		return_VALUE(-ENOMEM);
+	}
+	memset(ec_hc, 0, sizeof(struct acpi_ec_hc));
+
+	smbus = kmalloc(sizeof(struct acpi_ec_smbus), GFP_KERNEL);
+	if (!smbus) {
+		kfree(ec_hc);
+		return_VALUE(-ENOMEM);
+	}
+	memset(smbus, 0, sizeof(struct acpi_ec_smbus));
+
+	ec_hc->handle = device->handle;
+	strcpy(acpi_device_name(device), ACPI_EC_HC_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_EC_HC_CLASS);
+	acpi_driver_data(device) = ec_hc;
+
+	status = acpi_evaluate_integer(ec_hc->handle, "_EC", NULL, &val);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error obtaining _EC\n"));
+		kfree(ec_hc->smbus);
+		kfree(smbus);
+		return_VALUE(-EIO);
+	}
+
+	smbus->ec = acpi_driver_data(device->parent);
+	smbus->base = (val & 0xff00ull) >> 8;
+	smbus->alert = val & 0xffull;
+
+	smbus->adapter.owner = THIS_MODULE;
+	smbus->adapter.algo = &acpi_ec_smbus_algorithm;
+	smbus->adapter.algo_data = smbus;
+
+	if (i2c_add_adapter(&smbus->adapter)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+				  "EC SMBus adapter: Failed to register adapter\n"));
+		kfree(smbus);
+		kfree(ec_hc);
+		return_VALUE(-EIO);
+	}
+
+	ec_hc->smbus = smbus;
+
+	printk(KERN_INFO PREFIX "%s [%s]\n",
+	       acpi_device_name(device), acpi_device_bid(device));
+
+	return_VALUE(AE_OK);
+}
+
+static int acpi_ec_hc_remove(struct acpi_device *device, int type)
+{
+	struct acpi_ec_hc *ec_hc;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_hc_remove");
+
+	if (!device) {
+		return_VALUE(-EINVAL);
+	}
+	ec_hc = acpi_driver_data(device);
+
+	i2c_del_adapter(&ec_hc->smbus->adapter);
+	kfree(ec_hc->smbus);
+	kfree(ec_hc);
+
+	return_VALUE(AE_OK);
+}
+
+static int __init acpi_ec_hc_init(void)
+{
+	int result;
+
+	ACPI_FUNCTION_TRACE("acpi_ec_hc_init");
+	result = acpi_bus_register_driver(&acpi_ec_hc_driver);
+	if (result < 0) {
+		return_VALUE(-ENODEV);
+	}
+	return_VALUE(0);
+}
+
+static void __exit acpi_ec_hc_exit(void)
+{
+	ACPI_FUNCTION_TRACE("acpi_ec_hc_exit");
+	acpi_bus_unregister_driver(&acpi_ec_hc_driver);
+}
+
+struct acpi_ec_hc *acpi_get_ec_hc(struct acpi_device *device)
+{
+	ACPI_FUNCTION_TRACE("acpi_get_ec_hc");
+	return ((struct acpi_ec_hc *)acpi_driver_data(device->parent));
+}
+
+EXPORT_SYMBOL(acpi_get_ec_hc);
+
+module_init(acpi_ec_hc_init);
+module_exit(acpi_ec_hc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ducrot Bruno");
+MODULE_DESCRIPTION("ACPI EC SMBus driver");