Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 751 insertions, 0 deletions

diff --git a/drivers/acpi/dispatcher/dswexec.c b/drivers/acpi/dispatcher/dswexec.c
new file mode 100644
index 00000000000..2071a0d2bbb
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswexec.c
@@ -0,0 +1,751 @@
+/******************************************************************************
+ *
+ * Module Name: dswexec - Dispatcher method execution callbacks;
+ *                        dispatch to interpreter.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acdebug.h>
+#include <acpi/acdisasm.h>
+
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dswexec")
+
+/*
+ * Dispatch table for opcode classes
+ */
+static ACPI_EXECUTE_OP      acpi_gbl_op_type_dispatch [] = {
+			  acpi_ex_opcode_0A_0T_1R,
+			  acpi_ex_opcode_1A_0T_0R,
+			  acpi_ex_opcode_1A_0T_1R,
+			  acpi_ex_opcode_1A_1T_0R,
+			  acpi_ex_opcode_1A_1T_1R,
+			  acpi_ex_opcode_2A_0T_0R,
+			  acpi_ex_opcode_2A_0T_1R,
+			  acpi_ex_opcode_2A_1T_1R,
+			  acpi_ex_opcode_2A_2T_1R,
+			  acpi_ex_opcode_3A_0T_0R,
+			  acpi_ex_opcode_3A_1T_1R,
+			  acpi_ex_opcode_6A_0T_1R};
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_predicate_value
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get the result of a predicate evaluation
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_get_predicate_value (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *result_obj) {
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *obj_desc;
+	union acpi_operand_object       *local_obj_desc = NULL;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_get_predicate_value", walk_state);
+
+
+	walk_state->control_state->common.state = 0;
+
+	if (result_obj) {
+		status = acpi_ds_result_pop (&obj_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Could not get result from predicate evaluation, %s\n",
+				acpi_format_exception (status)));
+
+			return_ACPI_STATUS (status);
+		}
+	}
+	else {
+		status = acpi_ds_create_operand (walk_state, walk_state->op, 0);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		status = acpi_ex_resolve_to_value (&walk_state->operands [0], walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		obj_desc = walk_state->operands [0];
+	}
+
+	if (!obj_desc) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No predicate obj_desc=%p State=%p\n",
+			obj_desc, walk_state));
+
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	/*
+	 * Result of predicate evaluation must be an Integer
+	 * object. Implicitly convert the argument if necessary.
+	 */
+	status = acpi_ex_convert_to_integer (obj_desc, &local_obj_desc, 16);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (local_obj_desc) != ACPI_TYPE_INTEGER) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Bad predicate (not an integer) obj_desc=%p State=%p Type=%X\n",
+			obj_desc, walk_state, ACPI_GET_OBJECT_TYPE (obj_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup;
+	}
+
+	/* Truncate the predicate to 32-bits if necessary */
+
+	acpi_ex_truncate_for32bit_table (local_obj_desc);
+
+	/*
+	 * Save the result of the predicate evaluation on
+	 * the control stack
+	 */
+	if (local_obj_desc->integer.value) {
+		walk_state->control_state->common.value = TRUE;
+	}
+	else {
+		/*
+		 * Predicate is FALSE, we will just toss the
+		 * rest of the package
+		 */
+		walk_state->control_state->common.value = FALSE;
+		status = AE_CTRL_FALSE;
+	}
+
+
+cleanup:
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Completed a predicate eval=%X Op=%p\n",
+		walk_state->control_state->common.value, walk_state->op));
+
+	 /* Break to debugger to display result */
+
+	ACPI_DEBUGGER_EXEC (acpi_db_display_result_object (local_obj_desc, walk_state));
+
+	/*
+	 * Delete the predicate result object (we know that
+	 * we don't need it anymore)
+	 */
+	if (local_obj_desc != obj_desc) {
+		acpi_ut_remove_reference (local_obj_desc);
+	}
+	acpi_ut_remove_reference (obj_desc);
+
+	walk_state->control_state->common.state = ACPI_CONTROL_NORMAL;
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              out_op          - Return op if a new one is created
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the execution of control
+ *              methods.  This is where most operators and operands are
+ *              dispatched to the interpreter.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_exec_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op)
+{
+	union acpi_parse_object         *op;
+	acpi_status                     status = AE_OK;
+	u32                             opcode_class;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_exec_begin_op", walk_state);
+
+
+	op = walk_state->op;
+	if (!op) {
+		status = acpi_ds_load2_begin_op (walk_state, out_op);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		op = *out_op;
+		walk_state->op = op;
+		walk_state->opcode = op->common.aml_opcode;
+		walk_state->op_info = acpi_ps_get_opcode_info (op->common.aml_opcode);
+
+		if (acpi_ns_opens_scope (walk_state->op_info->object_type)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s) Popping scope for Op %p\n",
+				acpi_ut_get_type_name (walk_state->op_info->object_type), op));
+
+			status = acpi_ds_scope_stack_pop (walk_state);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+	}
+
+	if (op == walk_state->origin) {
+		if (out_op) {
+			*out_op = op;
+		}
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/*
+	 * If the previous opcode was a conditional, this opcode
+	 * must be the beginning of the associated predicate.
+	 * Save this knowledge in the current scope descriptor
+	 */
+	if ((walk_state->control_state) &&
+		(walk_state->control_state->common.state ==
+			ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Exec predicate Op=%p State=%p\n",
+				  op, walk_state));
+
+		walk_state->control_state->common.state = ACPI_CONTROL_PREDICATE_EXECUTING;
+
+		/* Save start of predicate */
+
+		walk_state->control_state->control.predicate_op = op;
+	}
+
+
+	opcode_class = walk_state->op_info->class;
+
+	/* We want to send namepaths to the load code */
+
+	if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
+		opcode_class = AML_CLASS_NAMED_OBJECT;
+	}
+
+	/*
+	 * Handle the opcode based upon the opcode type
+	 */
+	switch (opcode_class) {
+	case AML_CLASS_CONTROL:
+
+		status = acpi_ds_result_stack_push (walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		status = acpi_ds_exec_begin_control_op (walk_state, op);
+		break;
+
+
+	case AML_CLASS_NAMED_OBJECT:
+
+		if (walk_state->walk_type == ACPI_WALK_METHOD) {
+			/*
+			 * Found a named object declaration during method
+			 * execution;  we must enter this object into the
+			 * namespace.  The created object is temporary and
+			 * will be deleted upon completion of the execution
+			 * of this method.
+			 */
+			status = acpi_ds_load2_begin_op (walk_state, NULL);
+		}
+
+		if (op->common.aml_opcode == AML_REGION_OP) {
+			status = acpi_ds_result_stack_push (walk_state);
+		}
+		break;
+
+
+	case AML_CLASS_EXECUTE:
+	case AML_CLASS_CREATE:
+
+		/*
+		 * Most operators with arguments.
+		 * Start a new result/operand state
+		 */
+		status = acpi_ds_result_stack_push (walk_state);
+		break;
+
+
+	default:
+		break;
+	}
+
+	/* Nothing to do here during method execution */
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been completed in the
+ *                                walk;  Arguments have now been evaluated.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the execution of control
+ *              methods.  The only thing we really need to do here is to
+ *              notice the beginning of IF, ELSE, and WHILE blocks.
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ds_exec_end_op (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *op;
+	acpi_status                     status = AE_OK;
+	u32                             op_type;
+	u32                             op_class;
+	union acpi_parse_object         *next_op;
+	union acpi_parse_object         *first_arg;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ds_exec_end_op", walk_state);
+
+
+	op      = walk_state->op;
+	op_type = walk_state->op_info->type;
+	op_class = walk_state->op_info->class;
+
+	if (op_class == AML_CLASS_UNKNOWN) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown opcode %X\n", op->common.aml_opcode));
+		return_ACPI_STATUS (AE_NOT_IMPLEMENTED);
+	}
+
+	first_arg = op->common.value.arg;
+
+	/* Init the walk state */
+
+	walk_state->num_operands = 0;
+	walk_state->return_desc = NULL;
+	walk_state->result_obj = NULL;
+
+	/* Call debugger for single step support (DEBUG build only) */
+
+	ACPI_DEBUGGER_EXEC (status = acpi_db_single_step (walk_state, op, op_class));
+	ACPI_DEBUGGER_EXEC (if (ACPI_FAILURE (status)) {return_ACPI_STATUS (status);});
+
+	/* Decode the Opcode Class */
+
+	switch (op_class) {
+	case AML_CLASS_ARGUMENT:    /* constants, literals, etc. -- do nothing */
+		break;
+
+
+	case AML_CLASS_EXECUTE:     /* most operators with arguments */
+
+		/* Build resolved operand stack */
+
+		status = acpi_ds_create_operands (walk_state, first_arg);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		/* Done with this result state (Now that operand stack is built) */
+
+		status = acpi_ds_result_stack_pop (walk_state);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		/*
+		 * All opcodes require operand resolution, with the only exceptions
+		 * being the object_type and size_of operators.
+		 */
+		if (!(walk_state->op_info->flags & AML_NO_OPERAND_RESOLVE)) {
+			/* Resolve all operands */
+
+			status = acpi_ex_resolve_operands (walk_state->opcode,
+					  &(walk_state->operands [walk_state->num_operands -1]),
+					  walk_state);
+			if (ACPI_SUCCESS (status)) {
+				ACPI_DUMP_OPERANDS (ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE,
+						  acpi_ps_get_opcode_name (walk_state->opcode),
+						  walk_state->num_operands, "after ex_resolve_operands");
+			}
+		}
+
+		if (ACPI_SUCCESS (status)) {
+			/*
+			 * Dispatch the request to the appropriate interpreter handler
+			 * routine.  There is one routine per opcode "type" based upon the
+			 * number of opcode arguments and return type.
+			 */
+			status = acpi_gbl_op_type_dispatch[op_type] (walk_state);
+		}
+		else {
+			/*
+			 * Treat constructs of the form "Store(local_x,local_x)" as noops when the
+			 * Local is uninitialized.
+			 */
+			if  ((status == AE_AML_UNINITIALIZED_LOCAL) &&
+				(walk_state->opcode == AML_STORE_OP) &&
+				(walk_state->operands[0]->common.type == ACPI_TYPE_LOCAL_REFERENCE) &&
+				(walk_state->operands[1]->common.type == ACPI_TYPE_LOCAL_REFERENCE) &&
+				(walk_state->operands[0]->reference.opcode ==
+				 walk_state->operands[1]->reference.opcode) &&
+				(walk_state->operands[0]->reference.offset ==
+				 walk_state->operands[1]->reference.offset)) {
+				status = AE_OK;
+			}
+			else {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"[%s]: Could not resolve operands, %s\n",
+					acpi_ps_get_opcode_name (walk_state->opcode),
+					acpi_format_exception (status)));
+			}
+		}
+
+		/* Always delete the argument objects and clear the operand stack */
+
+		acpi_ds_clear_operands (walk_state);
+
+		/*
+		 * If a result object was returned from above, push it on the
+		 * current result stack
+		 */
+		if (ACPI_SUCCESS (status) &&
+			walk_state->result_obj) {
+			status = acpi_ds_result_push (walk_state->result_obj, walk_state);
+		}
+
+		break;
+
+
+	default:
+
+		switch (op_type) {
+		case AML_TYPE_CONTROL:    /* Type 1 opcode, IF/ELSE/WHILE/NOOP */
+
+			/* 1 Operand, 0 external_result, 0 internal_result */
+
+			status = acpi_ds_exec_end_control_op (walk_state, op);
+
+			/* Make sure to properly pop the result stack */
+
+			if (ACPI_SUCCESS (status)) {
+				status = acpi_ds_result_stack_pop (walk_state);
+			}
+			else if (status == AE_CTRL_PENDING) {
+				status = acpi_ds_result_stack_pop (walk_state);
+				if (ACPI_SUCCESS (status)) {
+					status = AE_CTRL_PENDING;
+				}
+			}
+			break;
+
+
+		case AML_TYPE_METHOD_CALL:
+
+			/*
+			 * If the method is referenced from within a package
+			 * declaration, it is not a invocation of the method, just
+			 * a reference to it.
+			 */
+			if ((op->asl.parent) &&
+			   ((op->asl.parent->asl.aml_opcode == AML_PACKAGE_OP) ||
+				(op->asl.parent->asl.aml_opcode == AML_VAR_PACKAGE_OP))) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Method Reference in a Package, Op=%p\n", op));
+				op->common.node = (struct acpi_namespace_node *) op->asl.value.arg->asl.node->object;
+				acpi_ut_add_reference (op->asl.value.arg->asl.node->object);
+				return_ACPI_STATUS (AE_OK);
+			}
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Method invocation, Op=%p\n", op));
+
+			/*
+			 * (AML_METHODCALL) Op->Asl.Value.Arg->Asl.Node contains
+			 * the method Node pointer
+			 */
+			/* next_op points to the op that holds the method name */
+
+			next_op = first_arg;
+
+			/* next_op points to first argument op */
+
+			next_op = next_op->common.next;
+
+			/*
+			 * Get the method's arguments and put them on the operand stack
+			 */
+			status = acpi_ds_create_operands (walk_state, next_op);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+
+			/*
+			 * Since the operands will be passed to another control method,
+			 * we must resolve all local references here (Local variables,
+			 * arguments to *this* method, etc.)
+			 */
+			status = acpi_ds_resolve_operands (walk_state);
+			if (ACPI_FAILURE (status)) {
+				/* On error, clear all resolved operands */
+
+				acpi_ds_clear_operands (walk_state);
+				break;
+			}
+
+			/*
+			 * Tell the walk loop to preempt this running method and
+			 * execute the new method
+			 */
+			status = AE_CTRL_TRANSFER;
+
+			/*
+			 * Return now; we don't want to disturb anything,
+			 * especially the operand count!
+			 */
+			return_ACPI_STATUS (status);
+
+
+		case AML_TYPE_CREATE_FIELD:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+				"Executing create_field Buffer/Index Op=%p\n", op));
+
+			status = acpi_ds_load2_end_op (walk_state);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+
+			status = acpi_ds_eval_buffer_field_operands (walk_state, op);
+			break;
+
+
+		case AML_TYPE_CREATE_OBJECT:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+				"Executing create_object (Buffer/Package) Op=%p\n", op));
+
+			switch (op->common.parent->common.aml_opcode) {
+			case AML_NAME_OP:
+
+				/*
+				 * Put the Node on the object stack (Contains the ACPI Name of
+				 * this object)
+				 */
+				walk_state->operands[0] = (void *) op->common.parent->common.node;
+				walk_state->num_operands = 1;
+
+				status = acpi_ds_create_node (walk_state, op->common.parent->common.node, op->common.parent);
+				if (ACPI_FAILURE (status)) {
+					break;
+				}
+
+				/* Fall through */
+				/*lint -fallthrough */
+
+			case AML_INT_EVAL_SUBTREE_OP:
+
+				status = acpi_ds_eval_data_object_operands (walk_state, op,
+						  acpi_ns_get_attached_object (op->common.parent->common.node));
+				break;
+
+			default:
+
+				status = acpi_ds_eval_data_object_operands (walk_state, op, NULL);
+				break;
+			}
+
+			/* Done with this result state (Now that operand stack is built) */
+
+			status = acpi_ds_result_stack_pop (walk_state);
+			if (ACPI_FAILURE (status)) {
+				goto cleanup;
+			}
+
+			/*
+			 * If a result object was returned from above, push it on the
+			 * current result stack
+			 */
+			if (ACPI_SUCCESS (status) &&
+				walk_state->result_obj) {
+				status = acpi_ds_result_push (walk_state->result_obj, walk_state);
+			}
+			break;
+
+
+		case AML_TYPE_NAMED_FIELD:
+		case AML_TYPE_NAMED_COMPLEX:
+		case AML_TYPE_NAMED_SIMPLE:
+		case AML_TYPE_NAMED_NO_OBJ:
+
+			status = acpi_ds_load2_end_op (walk_state);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+
+			if (op->common.aml_opcode == AML_REGION_OP) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+					"Executing op_region Address/Length Op=%p\n", op));
+
+				status = acpi_ds_eval_region_operands (walk_state, op);
+				if (ACPI_FAILURE (status)) {
+					break;
+				}
+
+				status = acpi_ds_result_stack_pop (walk_state);
+			}
+
+			break;
+
+
+		case AML_TYPE_UNDEFINED:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Undefined opcode type Op=%p\n", op));
+			return_ACPI_STATUS (AE_NOT_IMPLEMENTED);
+
+
+		case AML_TYPE_BOGUS:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+				"Internal opcode=%X type Op=%p\n",
+				walk_state->opcode, op));
+			break;
+
+
+		default:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Unimplemented opcode, class=%X type=%X Opcode=%X Op=%p\n",
+				op_class, op_type, op->common.aml_opcode, op));
+
+			status = AE_NOT_IMPLEMENTED;
+			break;
+		}
+	}
+
+	/*
+	 * ACPI 2.0 support for 64-bit integers: Truncate numeric
+	 * result value if we are executing from a 32-bit ACPI table
+	 */
+	acpi_ex_truncate_for32bit_table (walk_state->result_obj);
+
+	/*
+	 * Check if we just completed the evaluation of a
+	 * conditional predicate
+	 */
+
+	if ((ACPI_SUCCESS (status)) &&
+		(walk_state->control_state) &&
+		(walk_state->control_state->common.state ==
+			ACPI_CONTROL_PREDICATE_EXECUTING) &&
+		(walk_state->control_state->control.predicate_op == op)) {
+		status = acpi_ds_get_predicate_value (walk_state, walk_state->result_obj);
+		walk_state->result_obj = NULL;
+	}
+
+
+cleanup:
+
+	/* Invoke exception handler on error */
+
+	if (ACPI_FAILURE (status) &&
+		acpi_gbl_exception_handler &&
+		!(status & AE_CODE_CONTROL)) {
+		acpi_ex_exit_interpreter ();
+		status = acpi_gbl_exception_handler (status,
+				 walk_state->method_node->name.integer, walk_state->opcode,
+				 walk_state->aml_offset, NULL);
+		acpi_ex_enter_interpreter ();
+	}
+
+	if (walk_state->result_obj) {
+		/* Break to debugger to display result */
+
+		ACPI_DEBUGGER_EXEC (acpi_db_display_result_object (walk_state->result_obj, walk_state));
+
+		/*
+		 * Delete the result op if and only if:
+		 * Parent will not use the result -- such as any
+		 * non-nested type2 op in a method (parent will be method)
+		 */
+		acpi_ds_delete_result_if_not_used (op, walk_state->result_obj, walk_state);
+	}
+
+#ifdef _UNDER_DEVELOPMENT
+
+	if (walk_state->parser_state.aml == walk_state->parser_state.aml_end) {
+		acpi_db_method_end (walk_state);
+	}
+#endif
+
+	/* Always clear the object stack */
+
+	walk_state->num_operands = 0;
+
+#ifdef ACPI_DISASSEMBLER
+
+	/* On error, display method locals/args */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_dm_dump_method_info (status, walk_state, op);
+	}
+#endif
+
+	return_ACPI_STATUS (status);
+}
+
+