Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits)
  Blackfin: SMP: fix continuation lines
  Blackfin: acvilon: fix timeout usage for I2C
  Blackfin: fix typo in BF537 IRQ comment
  Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options
  Blackfin: set ARCH_KMALLOC_MINALIGN
  Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic
  Blackfin: another year of changes (update copyright in boot log)
  Blackfin: optimize strncpy a bit
  Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests
  Blackfin: move string functions to normal lib/ assembly
  Blackfin: SIC: cut down on IAR MMR reads a bit
  Blackfin: bf537-minotaur: fix build errors due to header changes
  Blackfin: kgdb: pass up the CC register instead of a 0 stub
  Blackfin: handle HW errors in the new "FAULT" printing code
  Blackfin: show the whole accumulator in the pseudo DBG insn
  Blackfin: support all possible registers in the pseudo instructions
  Blackfin: add support for the DBG (debug output) pseudo insn
  Blackfin: change the BUG opcode to an unused 16-bit opcode
  Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
  Blackfin: add support for the DBGA (debug assert) pseudo insn
  ...

48 files changed, 1938 insertions, 3241 deletions

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index c078849df7f..f66294b4f9d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -348,7 +348,7 @@ config MEM_MT48LC16M16A2TG_75
 
 config MEM_MT48LC32M8A2_75
 	bool
-	depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
+	depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
 	default y
 
 config MEM_MT48LC8M32B2B5_7
@@ -361,11 +361,6 @@ config MEM_MT48LC32M16A2TG_75
 	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
-config MEM_MT48LC32M8A2_75
-	bool
-	depends on (BFIN518F_EZBRD)
-	default y
-
 config MEM_MT48H32M16LFCJ_75
 	bool
 	depends on (BFIN526_EZBRD)
@@ -791,6 +786,34 @@ config MEMCPY_L1
 	  If enabled, the memcpy function is linked
 	  into L1 instruction memory. (less latency)
 
+config STRCMP_L1
+	bool "locate strcmp function in L1 Memory"
+	default y
+	help
+	  If enabled, the strcmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCMP_L1
+	bool "locate strncmp function in L1 Memory"
+	default y
+	help
+	  If enabled, the strncmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRCPY_L1
+	bool "locate strcpy function in L1 Memory"
+	default y
+	help
+	  If enabled, the strcpy function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCPY_L1
+	bool "locate strncpy function in L1 Memory"
+	default y
+	help
+	  If enabled, the strncpy function is linked
+	  into L1 instruction memory (less latency).
+
 config SYS_BFIN_SPINLOCK_L1
 	bool "Locate sys_bfin_spinlock function in L1 Memory"
 	default y
@@ -1187,32 +1210,6 @@ config  PM_BFIN_SLEEP
 	  If unsure, select "Sleep Deeper".
 endchoice
 
-config PM_WAKEUP_BY_GPIO
-	bool "Allow Wakeup from Standby by GPIO"
-	depends on PM && !BF54x
-
-config PM_WAKEUP_GPIO_NUMBER
-	int "GPIO number"
-	range 0 47
-	depends on PM_WAKEUP_BY_GPIO
-	default 2
-
-choice
-	prompt "GPIO Polarity"
-	depends on PM_WAKEUP_BY_GPIO
-	default PM_WAKEUP_GPIO_POLAR_H
-config  PM_WAKEUP_GPIO_POLAR_H
-	bool "Active High"
-config  PM_WAKEUP_GPIO_POLAR_L
-	bool "Active Low"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_F
-	bool "Falling EDGE"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_R
-	bool "Rising EDGE"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_B
-	bool "Both EDGE"
-endchoice
-
 comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 	depends on PM
 
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index aec89a5280b..d1825cb2476 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -238,7 +238,7 @@ config EARLY_PRINTK
 config NMI_WATCHDOG
 	bool "Enable NMI watchdog to help debugging lockup on SMP"
 	default n
-	depends on (SMP && !BFIN_SCRATCH_REG_RETN)
+	depends on SMP
 	help
 	  If any CPU in the system does not execute the period local timer
 	  interrupt for more than 5 seconds, then the NMI handler dumps debug
@@ -264,4 +264,13 @@ config BFIN_ISRAM_SELF_TEST
 	help
 	  Run some self tests of the isram driver code at boot.
 
+config BFIN_PSEUDODBG_INSNS
+	bool "Support pseudo debug instructions"
+	default n
+	help
+	  This option allows the kernel to emulate some pseudo instructions which
+	  allow simulator test cases to be run under Linux with no changes.
+
+	  Most people should say N here.
+
 endmenu
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index e6485c305ea..121cc04d877 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -39,9 +39,15 @@ extern unsigned long sclk_to_usecs(unsigned long sclk);
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
 struct pt_regs;
+#if defined(CONFIG_DEBUG_VERBOSE)
 extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
+#else
+#define dump_bfin_process(regs)
+#define dump_bfin_mem(regs)
+#define dump_bfin_trace_buffer()
+#endif
 
 /* init functions only */
 extern int init_arch_irq(void);
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 75f6dc336d4..8d9b1eba89c 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -9,7 +9,12 @@
 
 #ifdef CONFIG_BUG
 
-#define BFIN_BUG_OPCODE	0xefcd
+/*
+ * This can be any undefined 16-bit opcode, meaning
+ * ((opcode & 0xc000) != 0xc000)
+ * Anything from 0x0001 to 0x000A (inclusive) will work
+ */
+#define BFIN_BUG_OPCODE	0x0001
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 8542bc31f63..93f6c634fdf 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -15,6 +15,8 @@
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 #define SMP_CACHE_BYTES	L1_CACHE_BYTES
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #ifdef CONFIG_SMP
 #define __cacheline_aligned
 #else
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 91bd2d7b9d5..01b19d0cf50 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -167,23 +167,23 @@ int bfin_special_gpio_request(unsigned gpio, const char *label);
 #endif
 
 #ifdef CONFIG_PM
+int bfin_pm_standby_ctrl(unsigned ctrl);
 
-unsigned int bfin_pm_standby_setup(void);
-void bfin_pm_standby_restore(void);
+static inline int bfin_pm_standby_setup(void)
+{
+	return bfin_pm_standby_ctrl(1);
+}
+
+static inline void bfin_pm_standby_restore(void)
+{
+	bfin_pm_standby_ctrl(0);
+}
 
 void bfin_gpio_pm_hibernate_restore(void);
 void bfin_gpio_pm_hibernate_suspend(void);
 
 #ifndef CONFIG_BF54x
-#define PM_WAKE_RISING	0x1
-#define PM_WAKE_FALLING	0x2
-#define PM_WAKE_HIGH	0x4
-#define PM_WAKE_LOW	0x8
-#define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
-#define PM_WAKE_IGNORE	0xF0
-
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
-void gpio_pm_wakeup_free(unsigned gpio);
+int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
 
 struct gpio_port_s {
 	unsigned short data;
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
index 821c699c223..dcca3e6d6e8 100644
--- a/arch/blackfin/include/asm/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -80,7 +80,8 @@ PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
+extern char empty_zero_page[];
 
 extern unsigned int kobjsize(const void *objp);
 
diff --git a/arch/blackfin/include/asm/pseudo_instructions.h b/arch/blackfin/include/asm/pseudo_instructions.h
new file mode 100644
index 00000000000..b00adfa0816
--- /dev/null
+++ b/arch/blackfin/include/asm/pseudo_instructions.h
@@ -0,0 +1,18 @@
+/*
+ * header file for pseudo instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_PSEUDO_
+#define _BLACKFIN_PSEUDO_
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+extern bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode);
+extern bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode);
+
+#endif
diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h
index d7f0ccb418c..423c099aa98 100644
--- a/arch/blackfin/include/asm/string.h
+++ b/arch/blackfin/include/asm/string.h
@@ -12,121 +12,16 @@
 #ifdef __KERNEL__		/* only set these up for kernel code */
 
 #define __HAVE_ARCH_STRCPY
-extern inline char *strcpy(char *dest, const char *src)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%2 = B [%1++] (Z);"
-		"B [%0++] = %2;"
-		"CC = %2;"
-		"if cc jump 1b (bp);"
-		: "+&a" (dest), "+&a" (src), "=&d" (temp)
-		:
-		: "memory", "CC");
-
-	return xdest;
-}
+extern char *strcpy(char *dest, const char *src);
 
 #define __HAVE_ARCH_STRNCPY
-extern inline char *strncpy(char *dest, const char *src, size_t n)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	if (n == 0)
-		return xdest;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%3 = B [%1++] (Z);"
-		"B [%0++] = %3;"
-		"CC = %3;"
-		"if ! cc jump 2f;"
-		"%2 += -1;"
-		"CC = %2 == 0;"
-		"if ! cc jump 1b (bp);"
-		"jump 4f;"
-		"2:"
-		/* if src is shorter than n, we need to null pad bytes now */
-		"%3 = 0;"
-		"3:"
-		"%2 += -1;"
-		"CC = %2 == 0;"
-		"if cc jump 4f;"
-		"B [%0++] = %3;"
-		"jump 3b;"
-		"4:"
-		: "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp)
-		:
-		: "memory", "CC");
-
-	return xdest;
-}
+extern char *strncpy(char *dest, const char *src, size_t n);
 
 #define __HAVE_ARCH_STRCMP
-extern inline int strcmp(const char *cs, const char *ct)
-{
-	/* need to use int's here so the char's in the assembly don't get
-	 * sign extended incorrectly when we don't want them to be
-	 */
-	int __res1, __res2;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%2 = B[%0++] (Z);"      /* get *cs */
-		"%3 = B[%1++] (Z);"      /* get *ct */
-		"CC = %2 == %3;"         /* compare a byte */
-		"if ! cc jump 2f;"       /* not equal, break out */
-		"CC = %2;"               /* at end of cs? */
-		"if cc jump 1b (bp);"    /* no, keep going */
-		"jump.s 3f;"             /* strings are equal */
-		"2:"
-		"%2 = %2 - %3;"          /* *cs - *ct */
-		"3:"
-		: "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2)
-		:
-		: "memory", "CC");
-
-	return __res1;
-}
+extern int strcmp(const char *cs, const char *ct);
 
 #define __HAVE_ARCH_STRNCMP
-extern inline int strncmp(const char *cs, const char *ct, size_t count)
-{
-	/* need to use int's here so the char's in the assembly don't get
-	 * sign extended incorrectly when we don't want them to be
-	 */
-	int __res1, __res2;
-
-	if (!count)
-		return 0;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%3 = B[%0++] (Z);"      /* get *cs */
-		"%4 = B[%1++] (Z);"      /* get *ct */
-		"CC = %3 == %4;"         /* compare a byte */
-		"if ! cc jump 3f;"       /* not equal, break out */
-		"CC = %3;"               /* at end of cs? */
-		"if ! cc jump 4f;"       /* yes, all done */
-		"%2 += -1;"              /* no, adjust count */
-		"CC = %2 == 0;"
-		"if ! cc jump 1b;"       /* more to do, keep going */
-		"2:"
-		"%3 = 0;"                /* strings are equal */
-		"jump.s 4f;"
-		"3:"
-		"%3 = %3 - %4;"          /* *cs - *ct */
-		"4:"
-		: "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2)
-		:
-		: "memory", "CC");
-
-	return __res1;
-}
+extern int strncmp(const char *cs, const char *ct, size_t count);
 
 #define __HAVE_ARCH_MEMSET
 extern void *memset(void *s, int c, size_t count);
diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
index f1a06c006ed..7c368682c0a 100644
--- a/arch/blackfin/include/asm/tlbflush.h
+++ b/arch/blackfin/include/asm/tlbflush.h
@@ -1 +1,2 @@
 #include <asm-generic/tlbflush.h>
+#define flush_tlb_kernel_range(s, e) do { } while (0)
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index dc0aa55ae77..33589a29b8d 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -23,6 +23,13 @@
 #ifndef __ASSEMBLY__
 extern unsigned long trace_buff_offset;
 extern unsigned long software_trace_buff[];
+#if defined(CONFIG_DEBUG_VERBOSE)
+extern void decode_address(char *buf, unsigned long address);
+extern bool get_instruction(unsigned int *val, unsigned short *address);
+#else
+static inline void decode_address(char *buf, unsigned long address) { }
+static inline bool get_instruction(unsigned int *val, unsigned short *address) { return false; }
+#endif
 
 /* Trace Macros for C files */
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 346a421f156..30d0d1f01dc 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,7 +7,8 @@ extra-y := init_task.o vmlinux.lds
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o
+	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
+	exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
     obj-y += time-ts.o
@@ -29,6 +30,8 @@ obj-$(CONFIG_NMI_WATCHDOG)           += nmi.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
 obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
+obj-$(CONFIG_DEBUG_VERBOSE)          += trace.o
+obj-$(CONFIG_BFIN_PSEUDODBG_INSNS)   += pseudodbg.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index e35e20f00d9..42833ee2b30 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -475,9 +475,7 @@ GET_GPIO_P(maskb)
 
 
 #ifdef CONFIG_PM
-
 static unsigned short wakeup_map[GPIO_BANK_NUM];
-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 
 static const unsigned int sic_iwr_irqs[] = {
 #if defined(BF533_FAMILY)
@@ -514,112 +512,26 @@ static const unsigned int sic_iwr_irqs[] = {
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type)
-{
-	unsigned long flags;
-
-	if ((check_gpio(gpio) < 0) || !type)
-		return -EINVAL;
-
-	local_irq_save_hw(flags);
-	wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-	wakeup_flags_map[gpio] = type;
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_pm_wakeup_request);
-
-void gpio_pm_wakeup_free(unsigned gpio)
+int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 {
 	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
-		return;
+		return -EINVAL;
 
 	local_irq_save_hw(flags);
-
-	wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-
-	local_irq_restore_hw(flags);
-}
-EXPORT_SYMBOL(gpio_pm_wakeup_free);
-
-static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
-{
-	port_setup(gpio, GPIO_USAGE);
-	set_gpio_dir(gpio, 0);
-	set_gpio_inen(gpio, 1);
-
-	if (type & (PM_WAKE_RISING | PM_WAKE_FALLING))
-		set_gpio_edge(gpio, 1);
-	 else
-		set_gpio_edge(gpio, 0);
-
-	if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES))
-		set_gpio_both(gpio, 1);
+	if (ctrl)
+		wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
 	else
-		set_gpio_both(gpio, 0);
-
-	if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW)))
-		set_gpio_polar(gpio, 1);
-	else
-		set_gpio_polar(gpio, 0);
+		wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
 
-	SSYNC();
-
-	return 0;
-}
-
-u32 bfin_pm_standby_setup(void)
-{
-	u16 bank, mask, i, gpio;
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		mask = wakeup_map[gpio_bank(i)];
-		bank = gpio_bank(i);
-
-		gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
-		gpio_array[bank]->maskb = 0;
-
-		if (mask) {
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-			gpio_bank_saved[bank].fer   = *port_fer[bank];
-#endif
-			gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_array[bank]->both;
-			gpio_bank_saved[bank].reserved =
-						reserved_gpio_map[bank];
-
-			gpio = i;
-
-			while (mask) {
-				if ((mask & 1) && (wakeup_flags_map[gpio] !=
-					PM_WAKE_IGNORE)) {
-					reserved_gpio_map[gpio_bank(gpio)] |=
-							gpio_bit(gpio);
-					bfin_gpio_wakeup_type(gpio,
-						wakeup_flags_map[gpio]);
-					set_gpio_data(gpio, 0); /*Clear*/
-				}
-				gpio++;
-				mask >>= 1;
-			}
-
-			bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
-			gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
-		}
-	}
-
-	AWA_DUMMY_READ(maskb_set);
+	set_gpio_maskb(gpio, ctrl);
+	local_irq_restore_hw(flags);
 
 	return 0;
 }
 
-void bfin_pm_standby_restore(void)
+int bfin_pm_standby_ctrl(unsigned ctrl)
 {
 	u16 bank, mask, i;
 
@@ -627,24 +539,10 @@ void bfin_pm_standby_restore(void)
 		mask = wakeup_map[gpio_bank(i)];
 		bank = gpio_bank(i);
 
-		if (mask) {
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
-#endif
-			gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-			reserved_gpio_map[bank] =
-					gpio_bank_saved[bank].reserved;
-			bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
-		}
-
-		gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
+		if (mask)
+			bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
 	}
-	AWA_DUMMY_READ(maskb);
+	return 0;
 }
 
 void bfin_gpio_pm_hibernate_suspend(void)
@@ -708,16 +606,11 @@ void bfin_gpio_pm_hibernate_restore(void)
 #else /* CONFIG_BF54x */
 #ifdef CONFIG_PM
 
-u32 bfin_pm_standby_setup(void)
+int bfin_pm_standby_ctrl(unsigned ctrl)
 {
 	return 0;
 }
 
-void bfin_pm_standby_restore(void)
-{
-
-}
-
 void bfin_gpio_pm_hibernate_suspend(void)
 {
 	int i, bank;
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index ed8392c117e..2c264b51566 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -33,6 +33,18 @@ EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memchr);
 
 /*
+ * Because string functions are both inline and exported functions and
+ * folder arch/blackfin/lib is configured as a library path in Makefile,
+ * symbols exported in folder lib  is not linked into built-in.o but
+ * inlined only. In order to export string symbols to kernel module
+ * properly, they should be exported here.
+ */
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strncpy);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+
+/*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
  * doesn't really matter since they're not versioned).
diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c
new file mode 100644
index 00000000000..5cfbaa29821
--- /dev/null
+++ b/arch/blackfin/kernel/dumpstack.c
@@ -0,0 +1,174 @@
+/* Provide basic stack dumping functions
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <asm/trace.h>
+
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+static bool is_bfin_call(unsigned short *addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, addr))
+		return false;
+
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077) ||
+	    (opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
+		return true;
+
+	return false;
+
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+#ifdef CONFIG_PRINTK
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
+
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
+	 */
+
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
+			stack = (unsigned long *)task->thread.ksp;
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
+			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	printk(KERN_NOTICE "Stack info:\n");
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack
+			       && fp && ((unsigned int) fp & 0x3) == 0)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
+	}
+	if (fp) {
+		frame = fp;
+		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
+
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
+
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr < endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk(KERN_NOTICE "%p:", addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
+	}
+#endif
+}
+EXPORT_SYMBOL(show_stack);
+
+void dump_stack(void)
+{
+	unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags;
+#endif
+	trace_buffer_save(tflags);
+	dump_bfin_trace_buffer();
+	show_stack(current, &stack);
+	trace_buffer_restore(tflags);
+}
+EXPORT_SYMBOL(dump_stack);
diff --git a/arch/blackfin/kernel/exception.c b/arch/blackfin/kernel/exception.c
new file mode 100644
index 00000000000..9208b5fd518
--- /dev/null
+++ b/arch/blackfin/kernel/exception.c
@@ -0,0 +1,45 @@
+/* Basic functions for adding/removing custom exception handlers
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/module.h>
+#include <asm/irq_handler.h>
+
+int bfin_request_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != ex_replaceable)
+		return -EBUSY;
+
+	ex_table[exception] = handler;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_request_exception);
+
+int bfin_free_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != handler)
+		return -EBUSY;
+
+	ex_table[exception] = ex_replaceable;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_free_exception);
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index 7367aea4ae5..08bc44ea688 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -66,7 +66,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[BFIN_RETN] = regs->retn;
 	gdb_regs[BFIN_RETE] = regs->rete;
 	gdb_regs[BFIN_PC] = regs->pc;
-	gdb_regs[BFIN_CC] = 0;
+	gdb_regs[BFIN_CC] = (regs->astat >> 5) & 1;
 	gdb_regs[BFIN_EXTRA1] = 0;
 	gdb_regs[BFIN_EXTRA2] = 0;
 	gdb_regs[BFIN_EXTRA3] = 0;
diff --git a/arch/blackfin/kernel/pseudodbg.c b/arch/blackfin/kernel/pseudodbg.c
new file mode 100644
index 00000000000..db85bc94334
--- /dev/null
+++ b/arch/blackfin/kernel/pseudodbg.c
@@ -0,0 +1,191 @@
+/* The fake debug assert instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+const char * const greg_names[] = {
+	"R0",    "R1",      "R2",     "R3",    "R4",    "R5",    "R6",     "R7",
+	"P0",    "P1",      "P2",     "P3",    "P4",    "P5",    "SP",     "FP",
+	"I0",    "I1",      "I2",     "I3",    "M0",    "M1",    "M2",     "M3",
+	"B0",    "B1",      "B2",     "B3",    "L0",    "L1",    "L2",     "L3",
+	"A0.X",  "A0.W",    "A1.X",   "A1.W",  "<res>", "<res>", "ASTAT",  "RETS",
+	"<res>", "<res>",   "<res>",  "<res>", "<res>", "<res>", "<res>",  "<res>",
+	"LC0",   "LT0",     "LB0",    "LC1",   "LT1",   "LB1",   "CYCLES", "CYCLES2",
+	"USP",   "SEQSTAT", "SYSCFG", "RETI",  "RETX",  "RETN",  "RETE",   "EMUDAT",
+};
+
+static const char *get_allreg_name(int grp, int reg)
+{
+	return greg_names[(grp << 3) | reg];
+}
+
+/*
+ * Unfortunately, the pt_regs structure is not laid out the same way as the
+ * hardware register file, so we need to do some fix ups.
+ *
+ * CYCLES is not stored in the pt_regs structure - so, we just read it from
+ * the hardware.
+ *
+ * Don't support:
+ *  - All reserved registers
+ *  - All in group 7 are (supervisors only)
+ */
+
+static bool fix_up_reg(struct pt_regs *fp, long *value, int grp, int reg)
+{
+	long *val = &fp->r0;
+	unsigned long tmp;
+
+	/* Only do Dregs and Pregs for now */
+	if (grp == 5 ||
+	   (grp == 4 && (reg == 4 || reg == 5)) ||
+	   (grp == 7))
+		return false;
+
+	if (grp == 0 || (grp == 1 && reg < 6))
+		val -= (reg + 8 * grp);
+	else if (grp == 1 && reg == 6)
+		val = &fp->usp;
+	else if (grp == 1 && reg == 7)
+		val = &fp->fp;
+	else if (grp == 2) {
+		val = &fp->i0;
+		val -= reg;
+	} else if (grp == 3 && reg >= 4) {
+		val = &fp->l0;
+		val -= (reg - 4);
+	} else if (grp == 3 && reg < 4) {
+		val = &fp->b0;
+		val -= reg;
+	} else if (grp == 4 && reg < 4) {
+		val = &fp->a0x;
+		val -= reg;
+	} else if (grp == 4 && reg == 6)
+		val = &fp->astat;
+	else if (grp == 4 && reg == 7)
+		val = &fp->rets;
+	else if (grp == 6 && reg < 6) {
+		val = &fp->lc0;
+		val -= reg;
+	} else if (grp == 6 && reg == 6) {
+		__asm__ __volatile__("%0 = cycles;\n" : "=d"(tmp));
+		val = &tmp;
+	} else if (grp == 6 && reg == 7) {
+		__asm__ __volatile__("%0 = cycles2;\n" : "=d"(tmp));
+		val = &tmp;
+	}
+
+	*value = *val;
+	return true;
+
+}
+
+#define PseudoDbg_Assert_opcode         0xf0000000
+#define PseudoDbg_Assert_expected_bits  0
+#define PseudoDbg_Assert_expected_mask  0xffff
+#define PseudoDbg_Assert_regtest_bits   16
+#define PseudoDbg_Assert_regtest_mask   0x7
+#define PseudoDbg_Assert_grp_bits       19
+#define PseudoDbg_Assert_grp_mask       0x7
+#define PseudoDbg_Assert_dbgop_bits     22
+#define PseudoDbg_Assert_dbgop_mask     0x3
+#define PseudoDbg_Assert_dontcare_bits  24
+#define PseudoDbg_Assert_dontcare_mask  0x7
+#define PseudoDbg_Assert_code_bits      27
+#define PseudoDbg_Assert_code_mask      0x1f
+
+/*
+ * DBGA - debug assert
+ */
+bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode)
+{
+	int expected = ((opcode >> PseudoDbg_Assert_expected_bits) & PseudoDbg_Assert_expected_mask);
+	int dbgop    = ((opcode >> (PseudoDbg_Assert_dbgop_bits)) & PseudoDbg_Assert_dbgop_mask);
+	int grp      = ((opcode >> (PseudoDbg_Assert_grp_bits)) & PseudoDbg_Assert_grp_mask);
+	int regtest  = ((opcode >> (PseudoDbg_Assert_regtest_bits)) & PseudoDbg_Assert_regtest_mask);
+	long value;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_Assert_opcode)
+		return false;
+
+	if (!fix_up_reg(fp, &value, grp, regtest))
+		return false;
+
+	if (dbgop == 0 || dbgop == 2) {
+		/* DBGA ( regs_lo , uimm16 ) */
+		/* DBGAL ( regs , uimm16 ) */
+		if (expected != (value & 0xFFFF)) {
+			pr_notice("DBGA (%s.L,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)(value & 0xFFFF));
+			return false;
+		}
+
+	} else if (dbgop == 1 || dbgop == 3) {
+		/* DBGA ( regs_hi , uimm16 ) */
+		/* DBGAH ( regs , uimm16 ) */
+		if (expected != ((value >> 16) & 0xFFFF)) {
+			pr_notice("DBGA (%s.H,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)((value >> 16) & 0xFFFF));
+			return false;
+		}
+	}
+
+	fp->pc += 4;
+	return true;
+}
+
+#define PseudoDbg_opcode        0xf8000000
+#define PseudoDbg_reg_bits      0
+#define PseudoDbg_reg_mask      0x7
+#define PseudoDbg_grp_bits      3
+#define PseudoDbg_grp_mask      0x7
+#define PseudoDbg_fn_bits       6
+#define PseudoDbg_fn_mask       0x3
+#define PseudoDbg_code_bits     8
+#define PseudoDbg_code_mask     0xff
+
+/*
+ * DBG - debug (dump a register value out)
+ */
+bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode)
+{
+	int grp, fn, reg;
+	long value, value1;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_opcode)
+		return false;
+
+	opcode >>= 16;
+	grp = ((opcode >> PseudoDbg_grp_bits) & PseudoDbg_reg_mask);
+	fn  = ((opcode >> PseudoDbg_fn_bits)  & PseudoDbg_fn_mask);
+	reg = ((opcode >> PseudoDbg_reg_bits) & PseudoDbg_reg_mask);
+
+	if (fn == 3 && (reg == 0 || reg == 1)) {
+		if (!fix_up_reg(fp, &value, 4, 2 * reg))
+			return false;
+		if (!fix_up_reg(fp, &value1, 4, 2 * reg + 1))
+			return false;
+
+		pr_notice("DBG A%i = %02lx%08lx\n", reg, value & 0xFF, value1);
+		fp->pc += 2;
+		return true;
+
+	} else if (fn == 0) {
+		if (!fix_up_reg(fp, &value, grp, reg))
+			return false;
+
+		pr_notice("DBG %s = %08lx\n", get_allreg_name(grp, reg), value);
+		fp->pc += 2;
+		return true;
+	}
+
+	return false;
+}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8e2efceb364..d37a397f43f 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -925,7 +925,7 @@ void __init setup_arch(char **cmdline_p)
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
 
-	printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
+	printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
 	else if (bfin_compiled_revid() == -1)
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index 2e7f8e10bf8..bdc1e2f0da3 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -47,3 +47,26 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
 }
 EXPORT_SYMBOL(get_fb_unmapped_area);
 #endif
+
+/* Needed for legacy userspace atomic emulation */
+static DEFINE_SPINLOCK(bfin_spinlock_lock);
+
+#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
+__attribute__((l1_text))
+#endif
+asmlinkage int sys_bfin_spinlock(int *p)
+{
+	int ret, tmp = 0;
+
+	spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
+	ret = get_user(tmp, p);
+	if (likely(ret == 0)) {
+		if (unlikely(tmp))
+			ret = 1;
+		else
+			put_user(1, p);
+	}
+	spin_unlock(&bfin_spinlock_lock);
+
+	return ret;
+}
diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c
new file mode 100644
index 00000000000..59fcdf6b013
--- /dev/null
+++ b/arch/blackfin/kernel/trace.c
@@ -0,0 +1,981 @@
+/* provide some functions which dump the trace buffer, in a nice way for people
+ * to read it, and understand what is going on
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/dma.h>
+#include <asm/trace.h>
+#include <asm/fixed_code.h>
+#include <asm/traps.h>
+#include <asm/irq_handler.h>
+
+void decode_address(char *buf, unsigned long address)
+{
+	struct task_struct *p;
+	struct mm_struct *mm;
+	unsigned long flags, offset;
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+	struct rb_node *n;
+
+#ifdef CONFIG_KALLSYMS
+	unsigned long symsize;
+	const char *symname;
+	char *modname;
+	char *delim = ":";
+	char namebuf[128];
+#endif
+
+	buf += sprintf(buf, "<0x%08lx> ", address);
+
+#ifdef CONFIG_KALLSYMS
+	/* look up the address and see if we are in kernel space */
+	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
+
+	if (symname) {
+		/* yeah! kernel space! */
+		if (!modname)
+			modname = delim = "";
+		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
+			delim, modname, delim, symname,
+			(unsigned long)offset);
+		return;
+	}
+#endif
+
+	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
+		/* Problem in fixed code section? */
+		strcat(buf, "/* Maybe fixed code section */");
+		return;
+
+	} else if (address < CONFIG_BOOT_LOAD) {
+		/* Problem somewhere before the kernel start address */
+		strcat(buf, "/* Maybe null pointer? */");
+		return;
+
+	} else if (address >= COREMMR_BASE) {
+		strcat(buf, "/* core mmrs */");
+		return;
+
+	} else if (address >= SYSMMR_BASE) {
+		strcat(buf, "/* system mmrs */");
+		return;
+
+	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
+		strcat(buf, "/* on-chip L1 ROM */");
+		return;
+
+	} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
+		strcat(buf, "/* on-chip scratchpad */");
+		return;
+
+	} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
+		strcat(buf, "/* unconnected memory */");
+		return;
+
+	} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
+		strcat(buf, "/* reserved memory */");
+		return;
+
+	} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank A */");
+		return;
+
+	} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank B */");
+		return;
+	}
+
+	/*
+	 * Don't walk any of the vmas if we are oopsing, it has been known
+	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
+	 */
+	if (oops_in_progress) {
+		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
+		return;
+	}
+
+	/* looks like we're off in user-land, so let's walk all the
+	 * mappings of all our processes and see if we can't be a whee
+	 * bit more specific
+	 */
+	write_lock_irqsave(&tasklist_lock, flags);
+	for_each_process(p) {
+		mm = (in_atomic ? p->mm : get_task_mm(p));
+		if (!mm)
+			continue;
+
+		if (!down_read_trylock(&mm->mmap_sem)) {
+			if (!in_atomic)
+				mmput(mm);
+			continue;
+		}
+
+		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
+			struct vm_area_struct *vma;
+
+			vma = rb_entry(n, struct vm_area_struct, vm_rb);
+
+			if (address >= vma->vm_start && address < vma->vm_end) {
+				char _tmpbuf[256];
+				char *name = p->comm;
+				struct file *file = vma->vm_file;
+
+				if (file) {
+					char *d_name = d_path(&file->f_path, _tmpbuf,
+						      sizeof(_tmpbuf));
+					if (!IS_ERR(d_name))
+						name = d_name;
+				}
+
+				/* FLAT does not have its text aligned to the start of
+				 * the map while FDPIC ELF does ...
+				 */
+
+				/* before we can check flat/fdpic, we need to
+				 * make sure current is valid
+				 */
+				if ((unsigned long)current >= FIXED_CODE_START &&
+				    !((unsigned long)current & 0x3)) {
+					if (current->mm &&
+					    (address > current->mm->start_code) &&
+					    (address < current->mm->end_code))
+						offset = address - current->mm->start_code;
+					else
+						offset = (address - vma->vm_start) +
+							 (vma->vm_pgoff << PAGE_SHIFT);
+
+					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
+				} else
+					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
+						name, vma->vm_start, vma->vm_end);
+
+				up_read(&mm->mmap_sem);
+				if (!in_atomic)
+					mmput(mm);
+
+				if (buf[0] == '\0')
+					sprintf(buf, "[ %s ] dynamic memory", name);
+
+				goto done;
+			}
+		}
+
+		up_read(&mm->mmap_sem);
+		if (!in_atomic)
+			mmput(mm);
+	}
+
+	/*
+	 * we were unable to find this address anywhere,
+	 * or some MMs were skipped because they were in use.
+	 */
+	sprintf(buf, "/* kernel dynamic memory */");
+
+done:
+	write_unlock_irqrestore(&tasklist_lock, flags);
+}
+
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on success, false on bad address
+ */
+bool get_mem16(unsigned short *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	switch (bfin_mem_access_type(addr, 2)) {
+	case BFIN_MEM_ACCESS_CORE:
+	case BFIN_MEM_ACCESS_CORE_ONLY:
+		*val = *address;
+		return true;
+	case BFIN_MEM_ACCESS_DMA:
+		dma_memcpy(val, address, 2);
+		return true;
+	case BFIN_MEM_ACCESS_ITEST:
+		isram_memcpy(val, address, 2);
+		return true;
+	default: /* invalid access */
+		return false;
+	}
+}
+
+bool get_instruction(unsigned int *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+	unsigned short opcode0, opcode1;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* MMR region will never have instructions */
+	if (addr >= SYSMMR_BASE)
+		return false;
+
+	/* Scratchpad will never have instructions */
+	if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+		return false;
+
+	/* Data banks will never have instructions */
+	if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
+		return false;
+
+	if (!get_mem16(&opcode0, address))
+		return false;
+
+	/* was this a 32-bit instruction? If so, get the next 16 bits */
+	if ((opcode0 & 0xc000) == 0xc000) {
+		if (!get_mem16(&opcode1, address + 1))
+			return false;
+		*val = (opcode0 << 16) + opcode1;
+	} else
+		*val = opcode0;
+
+	return true;
+}
+
+#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
+/*
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * Decode the change of flow, and the common load/store instructions
+ * which are the main cause for faults, and discontinuities in the trace
+ * buffer.
+ */
+
+#define ProgCtrl_opcode         0x0000
+#define ProgCtrl_poprnd_bits    0
+#define ProgCtrl_poprnd_mask    0xf
+#define ProgCtrl_prgfunc_bits   4
+#define ProgCtrl_prgfunc_mask   0xf
+#define ProgCtrl_code_bits      8
+#define ProgCtrl_code_mask      0xff
+
+static void decode_ProgCtrl_0(unsigned int opcode)
+{
+	int poprnd  = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
+	int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
+
+	if (prgfunc == 0 && poprnd == 0)
+		pr_cont("NOP");
+	else if (prgfunc == 1 && poprnd == 0)
+		pr_cont("RTS");
+	else if (prgfunc == 1 && poprnd == 1)
+		pr_cont("RTI");
+	else if (prgfunc == 1 && poprnd == 2)
+		pr_cont("RTX");
+	else if (prgfunc == 1 && poprnd == 3)
+		pr_cont("RTN");
+	else if (prgfunc == 1 && poprnd == 4)
+		pr_cont("RTE");
+	else if (prgfunc == 2 && poprnd == 0)
+		pr_cont("IDLE");
+	else if (prgfunc == 2 && poprnd == 3)
+		pr_cont("CSYNC");
+	else if (prgfunc == 2 && poprnd == 4)
+		pr_cont("SSYNC");
+	else if (prgfunc == 2 && poprnd == 5)
+		pr_cont("EMUEXCPT");
+	else if (prgfunc == 3)
+		pr_cont("CLI R%i", poprnd);
+	else if (prgfunc == 4)
+		pr_cont("STI R%i", poprnd);
+	else if (prgfunc == 5)
+		pr_cont("JUMP (P%i)", poprnd);
+	else if (prgfunc == 6)
+		pr_cont("CALL (P%i)", poprnd);
+	else if (prgfunc == 7)
+		pr_cont("CALL (PC + P%i)", poprnd);
+	else if (prgfunc == 8)
+		pr_cont("JUMP (PC + P%i", poprnd);
+	else if (prgfunc == 9)
+		pr_cont("RAISE %i", poprnd);
+	else if (prgfunc == 10)
+		pr_cont("EXCPT %i", poprnd);
+	else
+		pr_cont("0x%04x", opcode);
+
+}
+
+#define BRCC_opcode             0x1000
+#define BRCC_offset_bits        0
+#define BRCC_offset_mask        0x3ff
+#define BRCC_B_bits             10
+#define BRCC_B_mask             0x1
+#define BRCC_T_bits             11
+#define BRCC_T_mask             0x1
+#define BRCC_code_bits          12
+#define BRCC_code_mask          0xf
+
+static void decode_BRCC_0(unsigned int opcode)
+{
+	int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
+	int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
+
+	pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
+}
+
+#define CALLa_opcode    0xe2000000
+#define CALLa_addr_bits 0
+#define CALLa_addr_mask 0xffffff
+#define CALLa_S_bits    24
+#define CALLa_S_mask    0x1
+#define CALLa_code_bits 25
+#define CALLa_code_mask 0x7f
+
+static void decode_CALLa_0(unsigned int opcode)
+{
+	int S   = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
+
+	if (S)
+		pr_cont("CALL pcrel");
+	else
+		pr_cont("JUMP.L");
+}
+
+#define LoopSetup_opcode                0xe0800000
+#define LoopSetup_eoffset_bits          0
+#define LoopSetup_eoffset_mask          0x3ff
+#define LoopSetup_dontcare_bits         10
+#define LoopSetup_dontcare_mask         0x3
+#define LoopSetup_reg_bits              12
+#define LoopSetup_reg_mask              0xf
+#define LoopSetup_soffset_bits          16
+#define LoopSetup_soffset_mask          0xf
+#define LoopSetup_c_bits                20
+#define LoopSetup_c_mask                0x1
+#define LoopSetup_rop_bits              21
+#define LoopSetup_rop_mask              0x3
+#define LoopSetup_code_bits             23
+#define LoopSetup_code_mask             0x1ff
+
+static void decode_LoopSetup_0(unsigned int opcode)
+{
+	int c   = ((opcode >> LoopSetup_c_bits)   & LoopSetup_c_mask);
+	int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
+	int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
+
+	pr_cont("LSETUP <> LC%i", c);
+	if ((rop & 1) == 1)
+		pr_cont("= P%i", reg);
+	if ((rop & 2) == 2)
+		pr_cont(" >> 0x1");
+}
+
+#define DspLDST_opcode          0x9c00
+#define DspLDST_reg_bits        0
+#define DspLDST_reg_mask        0x7
+#define DspLDST_i_bits          3
+#define DspLDST_i_mask          0x3
+#define DspLDST_m_bits          5
+#define DspLDST_m_mask          0x3
+#define DspLDST_aop_bits        7
+#define DspLDST_aop_mask        0x3
+#define DspLDST_W_bits          9
+#define DspLDST_W_mask          0x1
+#define DspLDST_code_bits       10
+#define DspLDST_code_mask       0x3f
+
+static void decode_dspLDST_0(unsigned int opcode)
+{
+	int i   = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
+	int m   = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
+	int W   = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
+	int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
+	int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
+
+	if (W == 0) {
+		pr_cont("R%i", reg);
+		switch (m) {
+		case 0:
+			pr_cont(" = ");
+			break;
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+
+	pr_cont("[ I%i", i);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++ ]");
+		break;
+	case 1:
+		pr_cont("-- ]");
+		break;
+	}
+
+	if (W == 1) {
+		pr_cont(" = R%i", reg);
+		switch (m) {
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+}
+
+#define LDST_opcode             0x9000
+#define LDST_reg_bits           0
+#define LDST_reg_mask           0x7
+#define LDST_ptr_bits           3
+#define LDST_ptr_mask           0x7
+#define LDST_Z_bits             6
+#define LDST_Z_mask             0x1
+#define LDST_aop_bits           7
+#define LDST_aop_mask           0x3
+#define LDST_W_bits             9
+#define LDST_W_mask             0x1
+#define LDST_sz_bits            10
+#define LDST_sz_mask            0x3
+#define LDST_code_bits          12
+#define LDST_code_mask          0xf
+
+static void decode_LDST_0(unsigned int opcode)
+{
+	int Z   = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
+	int W   = ((opcode >> LDST_W_bits) & LDST_W_mask);
+	int sz  = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
+	int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
+	int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
+	int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	switch (sz) {
+	case 1:
+		pr_cont("W");
+		break;
+	case 2:
+		pr_cont("B");
+		break;
+	}
+
+	pr_cont("[P%i", ptr);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++");
+		break;
+	case 1:
+		pr_cont("--");
+		break;
+	}
+	pr_cont("]");
+
+	if (W == 1)
+		pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	if (sz) {
+		if (Z)
+			pr_cont(" (X)");
+		else
+			pr_cont(" (Z)");
+	}
+}
+
+#define LDSTii_opcode           0xa000
+#define LDSTii_reg_bit          0
+#define LDSTii_reg_mask         0x7
+#define LDSTii_ptr_bit          3
+#define LDSTii_ptr_mask         0x7
+#define LDSTii_offset_bit       6
+#define LDSTii_offset_mask      0xf
+#define LDSTii_op_bit           10
+#define LDSTii_op_mask          0x3
+#define LDSTii_W_bit            12
+#define LDSTii_W_mask           0x1
+#define LDSTii_code_bit         13
+#define LDSTii_code_mask        0x7
+
+static void decode_LDSTii_0(unsigned int opcode)
+{
+	int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
+	int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
+	int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
+	int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
+	int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
+
+	if (W == 0) {
+		pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
+			op == 1 || op == 2 ? "" : "W", ptr, offset);
+		if (op == 2)
+			pr_cont("(Z)");
+		if (op == 3)
+			pr_cont("(X)");
+	} else {
+		pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
+			offset, op == 3 ? "P" : "R", reg);
+	}
+}
+
+#define LDSTidxI_opcode         0xe4000000
+#define LDSTidxI_offset_bits    0
+#define LDSTidxI_offset_mask    0xffff
+#define LDSTidxI_reg_bits       16
+#define LDSTidxI_reg_mask       0x7
+#define LDSTidxI_ptr_bits       19
+#define LDSTidxI_ptr_mask       0x7
+#define LDSTidxI_sz_bits        22
+#define LDSTidxI_sz_mask        0x3
+#define LDSTidxI_Z_bits         24
+#define LDSTidxI_Z_mask         0x1
+#define LDSTidxI_W_bits         25
+#define LDSTidxI_W_mask         0x1
+#define LDSTidxI_code_bits      26
+#define LDSTidxI_code_mask      0x3f
+
+static void decode_LDSTidxI_0(unsigned int opcode)
+{
+	int Z      = ((opcode >> LDSTidxI_Z_bits)      & LDSTidxI_Z_mask);
+	int W      = ((opcode >> LDSTidxI_W_bits)      & LDSTidxI_W_mask);
+	int sz     = ((opcode >> LDSTidxI_sz_bits)     & LDSTidxI_sz_mask);
+	int reg    = ((opcode >> LDSTidxI_reg_bits)    & LDSTidxI_reg_mask);
+	int ptr    = ((opcode >> LDSTidxI_ptr_bits)    & LDSTidxI_ptr_mask);
+	int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
+
+	if (sz == 1)
+		pr_cont("W");
+	if (sz == 2)
+		pr_cont("B");
+
+	pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
+		(offset & 0x1f) << 2);
+
+	if (W == 0 && sz != 0) {
+		if (Z)
+			pr_cont("(X)");
+		else
+			pr_cont("(Z)");
+	}
+
+	if (W == 1)
+		pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+}
+
+static void decode_opcode(unsigned int opcode)
+{
+#ifdef CONFIG_BUG
+	if (opcode == BFIN_BUG_OPCODE)
+		pr_cont("BUG");
+	else
+#endif
+	if ((opcode & 0xffffff00) == ProgCtrl_opcode)
+		decode_ProgCtrl_0(opcode);
+	else if ((opcode & 0xfffff000) == BRCC_opcode)
+		decode_BRCC_0(opcode);
+	else if ((opcode & 0xfffff000) == 0x2000)
+		pr_cont("JUMP.S");
+	else if ((opcode & 0xfe000000) == CALLa_opcode)
+		decode_CALLa_0(opcode);
+	else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
+		decode_LoopSetup_0(opcode);
+	else if ((opcode & 0xfffffc00) == DspLDST_opcode)
+		decode_dspLDST_0(opcode);
+	else if ((opcode & 0xfffff000) == LDST_opcode)
+		decode_LDST_0(opcode);
+	else if ((opcode & 0xffffe000) == LDSTii_opcode)
+		decode_LDSTii_0(opcode);
+	else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
+		decode_LDSTidxI_0(opcode);
+	else if (opcode & 0xffff0000)
+		pr_cont("0x%08x", opcode);
+	else
+		pr_cont("0x%04x", opcode);
+}
+
+#define BIT_MULTI_INS 0x08000000
+static void decode_instruction(unsigned short *address)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, address))
+		return;
+
+	decode_opcode(opcode);
+
+	/* If things are a 32-bit instruction, it has the possibility of being
+	 * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
+	 * This test collidates with the unlink instruction, so disallow that
+	 */
+	if ((opcode & 0xc0000000) == 0xc0000000 &&
+	    (opcode & BIT_MULTI_INS) &&
+	    (opcode & 0xe8000000) != 0xe8000000) {
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 2))
+			return;
+		decode_opcode(opcode);
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 3))
+			return;
+		decode_opcode(opcode);
+	}
+}
+#endif
+
+void dump_bfin_trace_buffer(void)
+{
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags, i = 0, fault = 0;
+	char buf[150];
+	unsigned short *addr;
+	unsigned int cpu = raw_smp_processor_id();
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	int j, index;
+#endif
+
+	trace_buffer_save(tflags);
+
+	pr_notice("Hardware Trace:\n");
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
+	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("%4i Target : %s\n", i, buf);
+			/* Normally, the faulting instruction doesn't go into
+			 * the trace buffer, (since it doesn't commit), so
+			 * we print out the fault address here
+			 */
+			if (!fault && addr == ((unsigned short *)evt_ivhw)) {
+				addr = (unsigned short *)bfin_read_TBUF();
+				decode_address(buf, (unsigned long)addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction(addr);
+				pr_cont("\n");
+				fault = 1;
+				continue;
+			}
+			if (!fault && addr == (unsigned short *)trap &&
+				(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) {
+				decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr);
+				pr_cont("\n");
+				fault = 1;
+			}
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("     Source : %s ", buf);
+			decode_instruction(addr);
+			pr_cont("\n");
+		}
+	}
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	if (trace_buff_offset)
+		index = trace_buff_offset / 4;
+	else
+		index = EXPAND_LEN;
+
+	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+	while (j) {
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("%4i Target : %s\n", i, buf);
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		pr_cont("\n");
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		j--;
+		i++;
+	}
+#endif
+
+	trace_buffer_restore(tflags);
+#endif
+}
+EXPORT_SYMBOL(dump_bfin_trace_buffer);
+
+void dump_bfin_process(struct pt_regs *fp)
+{
+	/* We should be able to look at fp->ipend, but we don't push it on the
+	 * stack all the time, so do this until we fix that */
+	unsigned int context = bfin_read_IPEND();
+
+	if (oops_in_progress)
+		pr_emerg("Kernel OOPS in progress\n");
+
+	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
+		pr_notice("HW Error context\n");
+	else if (context & 0x0020)
+		pr_notice("Deferred Exception context\n");
+	else if (context & 0x3FC0)
+		pr_notice("Interrupt context\n");
+	else if (context & 0x4000)
+		pr_notice("Deferred Interrupt context\n");
+	else if (context & 0x8000)
+		pr_notice("Kernel process context\n");
+
+	/* Because we are crashing, and pointers could be bad, we check things
+	 * pretty closely before we use them
+	 */
+	if ((unsigned long)current >= FIXED_CODE_START &&
+	    !((unsigned long)current & 0x3) && current->pid) {
+		pr_notice("CURRENT PROCESS:\n");
+		if (current->comm >= (char *)FIXED_CODE_START)
+			pr_notice("COMM=%s PID=%d",
+				current->comm, current->pid);
+		else
+			pr_notice("COMM= invalid");
+
+		pr_cont("  CPU=%d\n", current_thread_info()->cpu);
+		if (!((unsigned long)current->mm & 0x3) &&
+			(unsigned long)current->mm >= FIXED_CODE_START) {
+			pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n",
+				(void *)current->mm->start_code,
+				(void *)current->mm->end_code,
+				(void *)current->mm->start_data,
+				(void *)current->mm->end_data);
+			pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
+				(void *)current->mm->end_data,
+				(void *)current->mm->brk,
+				(void *)current->mm->start_stack);
+		} else
+			pr_notice("invalid mm\n");
+	} else
+		pr_notice("No Valid process in current context\n");
+}
+
+void dump_bfin_mem(struct pt_regs *fp)
+{
+	unsigned short *addr, *erraddr, val = 0, err = 0;
+	char sti = 0, buf[6];
+
+	erraddr = (void *)fp->pc;
+
+	pr_notice("return address: [0x%p]; contents of:", erraddr);
+
+	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
+	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
+	     addr++) {
+		if (!((unsigned long)addr & 0xF))
+			pr_notice("0x%p: ", addr);
+
+		if (!get_mem16(&val, addr)) {
+				val = 0;
+				sprintf(buf, "????");
+		} else
+			sprintf(buf, "%04x", val);
+
+		if (addr == erraddr) {
+			pr_cont("[%s]", buf);
+			err = val;
+		} else
+			pr_cont(" %s ", buf);
+
+		/* Do any previous instructions turn on interrupts? */
+		if (addr <= erraddr &&				/* in the past */
+		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
+		      val == 0x017b))				/* [SP++] = RETI */
+			sti = 1;
+	}
+
+	pr_cont("\n");
+
+	/* Hardware error interrupts can be deferred */
+	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
+	    oops_in_progress)){
+		pr_notice("Looks like this was a deferred error - sorry\n");
+#ifndef CONFIG_DEBUG_HWERR
+		pr_notice("The remaining message may be meaningless\n");
+		pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
+#else
+		/* If we are handling only one peripheral interrupt
+		 * and current mm and pid are valid, and the last error
+		 * was in that user space process's text area
+		 * print it out - because that is where the problem exists
+		 */
+		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
+		     (current->pid && current->mm)) {
+			/* And the last RETI points to the current userspace context */
+			if ((fp + 1)->pc >= current->mm->start_code &&
+			    (fp + 1)->pc <= current->mm->end_code) {
+				pr_notice("It might be better to look around here :\n");
+				pr_notice("-------------------------------------------\n");
+				show_regs(fp + 1);
+				pr_notice("-------------------------------------------\n");
+			}
+		}
+#endif
+	}
+}
+
+void show_regs(struct pt_regs *fp)
+{
+	char buf[150];
+	struct irqaction *action;
+	unsigned int i;
+	unsigned long flags = 0;
+	unsigned int cpu = raw_smp_processor_id();
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+
+	pr_notice("\n");
+	if (CPUID != bfin_cpuid())
+		pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	pr_notice("ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		pr_cont("(Detected 0.%d)", bfin_revid());
+
+	pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	pr_notice("%s", linux_banner);
+
+	pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+	pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
+	if (fp->ipend & EVT_IRPTEN)
+		pr_notice("  Global Interrupts Disabled (IPEND[4])\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
+		pr_notice("  Peripheral interrupts masked off\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+		pr_notice("  Kernel interrupts masked off\n");
+	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
+		pr_notice("  HWERRCAUSE: 0x%lx\n",
+			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+#ifdef EBIU_ERRMST
+		/* If the error was from the EBIU, print it out */
+		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
+			pr_notice("  EBIU Error Reason  : 0x%04x\n",
+				bfin_read_EBIU_ERRMST());
+			pr_notice("  EBIU Error Address : 0x%08x\n",
+				bfin_read_EBIU_ERRADD());
+		}
+#endif
+	}
+	pr_notice("  EXCAUSE   : 0x%lx\n",
+		fp->seqstat & SEQSTAT_EXCAUSE);
+	for (i = 2; i <= 15 ; i++) {
+		if (fp->ipend & (1 << i)) {
+			if (i != 4) {
+				decode_address(buf, bfin_read32(EVT0 + 4*i));
+				pr_notice("  physical IVG%i asserted : %s\n", i, buf);
+			} else
+				pr_notice("  interrupts disabled\n");
+		}
+	}
+
+	/* if no interrupts are going off, don't print this out */
+	if (fp->ipend & ~0x3F) {
+		for (i = 0; i < (NR_IRQS - 1); i++) {
+			if (!in_atomic)
+				raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+			action = irq_desc[i].action;
+			if (!action)
+				goto unlock;
+
+			decode_address(buf, (unsigned int)action->handler);
+			pr_notice("  logical irq %3d mapped  : %s", i, buf);
+			for (action = action->next; action; action = action->next) {
+				decode_address(buf, (unsigned int)action->handler);
+				pr_cont(", %s", buf);
+			}
+			pr_cont("\n");
+unlock:
+			if (!in_atomic)
+				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+		}
+	}
+
+	decode_address(buf, fp->rete);
+	pr_notice(" RETE: %s\n", buf);
+	decode_address(buf, fp->retn);
+	pr_notice(" RETN: %s\n", buf);
+	decode_address(buf, fp->retx);
+	pr_notice(" RETX: %s\n", buf);
+	decode_address(buf, fp->rets);
+	pr_notice(" RETS: %s\n", buf);
+	decode_address(buf, fp->pc);
+	pr_notice(" PC  : %s\n", buf);
+
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
+	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
+		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
+		pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+		pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
+	}
+
+	pr_notice("PROCESSOR STATE:\n");
+	pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
+		fp->r0, fp->r1, fp->r2, fp->r3);
+	pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
+		fp->r4, fp->r5, fp->r6, fp->r7);
+	pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
+		fp->p0, fp->p1, fp->p2, fp->p3);
+	pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
+		fp->p4, fp->p5, fp->fp, (long)fp);
+	pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
+		fp->lb0, fp->lt0, fp->lc0);
+	pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
+		fp->lb1, fp->lt1, fp->lc1);
+	pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
+		fp->b0, fp->l0, fp->m0, fp->i0);
+	pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
+		fp->b1, fp->l1, fp->m1, fp->i1);
+	pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
+		fp->b2, fp->l2, fp->m2, fp->i2);
+	pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
+		fp->b3, fp->l3, fp->m3, fp->i3);
+	pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
+		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	pr_notice("USP : %08lx  ASTAT: %08lx\n",
+		rdusp(), fp->astat);
+
+	pr_notice("\n");
+}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index ba70c4bc269..59c1df75e4d 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -1,25 +1,22 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Main exception handling logic.
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
 
 #include <linux/bug.h>
 #include <linux/uaccess.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/fs.h>
-#include <linux/rbtree.h>
 #include <asm/traps.h>
-#include <asm/cacheflush.h>
 #include <asm/cplb.h>
-#include <asm/dma.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
+#include <asm/pseudo_instructions.h>
 
 #ifdef CONFIG_KGDB
 # include <linux/kgdb.h>
@@ -62,194 +59,6 @@ void __init trap_init(void)
 	CSYNC();
 }
 
-static void decode_address(char *buf, unsigned long address)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	struct task_struct *p;
-	struct mm_struct *mm;
-	unsigned long flags, offset;
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-	struct rb_node *n;
-
-#ifdef CONFIG_KALLSYMS
-	unsigned long symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[128];
-#endif
-
-	buf += sprintf(buf, "<0x%08lx> ", address);
-
-#ifdef CONFIG_KALLSYMS
-	/* look up the address and see if we are in kernel space */
-	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
-
-	if (symname) {
-		/* yeah! kernel space! */
-		if (!modname)
-			modname = delim = "";
-		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
-		        delim, modname, delim, symname,
-		        (unsigned long)offset);
-		return;
-	}
-#endif
-
-	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
-		/* Problem in fixed code section? */
-		strcat(buf, "/* Maybe fixed code section */");
-		return;
-
-	} else if (address < CONFIG_BOOT_LOAD) {
-		/* Problem somewhere before the kernel start address */
-		strcat(buf, "/* Maybe null pointer? */");
-		return;
-
-	} else if (address >= COREMMR_BASE) {
-		strcat(buf, "/* core mmrs */");
-		return;
-
-	} else if (address >= SYSMMR_BASE) {
-		strcat(buf, "/* system mmrs */");
-		return;
-
-	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
-		strcat(buf, "/* on-chip L1 ROM */");
-		return;
-	}
-
-	/*
-	 * Don't walk any of the vmas if we are oopsing, it has been known
-	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
-	 */
-	if (oops_in_progress) {
-		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
-		return;
-	}
-
-	/* looks like we're off in user-land, so let's walk all the
-	 * mappings of all our processes and see if we can't be a whee
-	 * bit more specific
-	 */
-	write_lock_irqsave(&tasklist_lock, flags);
-	for_each_process(p) {
-		mm = (in_atomic ? p->mm : get_task_mm(p));
-		if (!mm)
-			continue;
-
-		if (!down_read_trylock(&mm->mmap_sem)) {
-			if (!in_atomic)
-				mmput(mm);
-			continue;
-		}
-
-		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
-			struct vm_area_struct *vma;
-
-			vma = rb_entry(n, struct vm_area_struct, vm_rb);
-
-			if (address >= vma->vm_start && address < vma->vm_end) {
-				char _tmpbuf[256];
-				char *name = p->comm;
-				struct file *file = vma->vm_file;
-
-				if (file) {
-					char *d_name = d_path(&file->f_path, _tmpbuf,
-						      sizeof(_tmpbuf));
-					if (!IS_ERR(d_name))
-						name = d_name;
-				}
-
-				/* FLAT does not have its text aligned to the start of
-				 * the map while FDPIC ELF does ...
-				 */
-
-				/* before we can check flat/fdpic, we need to
-				 * make sure current is valid
-				 */
-				if ((unsigned long)current >= FIXED_CODE_START &&
-				    !((unsigned long)current & 0x3)) {
-					if (current->mm &&
-					    (address > current->mm->start_code) &&
-					    (address < current->mm->end_code))
-						offset = address - current->mm->start_code;
-					else
-						offset = (address - vma->vm_start) +
-							 (vma->vm_pgoff << PAGE_SHIFT);
-
-					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
-				} else
-					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
-						name, vma->vm_start, vma->vm_end);
-
-				up_read(&mm->mmap_sem);
-				if (!in_atomic)
-					mmput(mm);
-
-				if (buf[0] == '\0')
-					sprintf(buf, "[ %s ] dynamic memory", name);
-
-				goto done;
-			}
-		}
-
-		up_read(&mm->mmap_sem);
-		if (!in_atomic)
-			mmput(mm);
-	}
-
-	/*
-	 * we were unable to find this address anywhere,
-	 * or some MMs were skipped because they were in use.
-	 */
-	sprintf(buf, "/* kernel dynamic memory */");
-
-done:
-	write_unlock_irqrestore(&tasklist_lock, flags);
-#else
-	sprintf(buf, " ");
-#endif
-}
-
-asmlinkage void double_fault_c(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int j;
-	trace_buffer_save(j);
-#endif
-
-	console_verbose();
-	oops_in_progress = 1;
-#ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "Double Fault\n");
-#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
-		unsigned int cpu = raw_smp_processor_id();
-		char buf[150];
-		decode_address(buf, cpu_pda[cpu].retx_doublefault);
-		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
-			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
-		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
-		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
-		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
-
-		decode_address(buf, fp->retx);
-		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
-	} else
-#endif
-	{
-		dump_bfin_process(fp);
-		dump_bfin_mem(fp);
-		show_regs(fp);
-		dump_bfin_trace_buffer();
-	}
-#endif
-	panic("Double Fault - unrecoverable event");
-
-}
-
 static int kernel_mode_regs(struct pt_regs *regs)
 {
 	return regs->ipend & 0xffc0;
@@ -260,6 +69,9 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int j;
 #endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+	int opcode;
+#endif
 	unsigned int cpu = raw_smp_processor_id();
 	const char *strerror = NULL;
 	int sig = 0;
@@ -392,6 +204,19 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 			}
 		}
 #endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+		/*
+		 * Support for the fake instructions, if the instruction fails,
+		 * then just execute a illegal opcode failure (like normal).
+		 * Don't support these instructions inside the kernel
+		 */
+		if (!kernel_mode_regs(fp) && get_instruction(&opcode, (unsigned short *)fp->pc)) {
+			if (execute_pseudodbg_assert(fp, opcode))
+				goto traps_done;
+			if (execute_pseudodbg(fp, opcode))
+				goto traps_done;
+		}
+#endif
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
 		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
@@ -672,659 +497,44 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 	trace_buffer_restore(j);
 }
 
-/* Typical exception handling routines	*/
-
-#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
-
-/*
- * Similar to get_user, do some address checking, then dereference
- * Return true on success, false on bad address
- */
-static bool get_instruction(unsigned short *val, unsigned short *address)
-{
-	unsigned long addr = (unsigned long)address;
-
-	/* Check for odd addresses */
-	if (addr & 0x1)
-		return false;
-
-	/* MMR region will never have instructions */
-	if (addr >= SYSMMR_BASE)
-		return false;
-
-	switch (bfin_mem_access_type(addr, 2)) {
-		case BFIN_MEM_ACCESS_CORE:
-		case BFIN_MEM_ACCESS_CORE_ONLY:
-			*val = *address;
-			return true;
-		case BFIN_MEM_ACCESS_DMA:
-			dma_memcpy(val, address, 2);
-			return true;
-		case BFIN_MEM_ACCESS_ITEST:
-			isram_memcpy(val, address, 2);
-			return true;
-		default: /* invalid access */
-			return false;
-	}
-}
-
-/*
- * decode the instruction if we are printing out the trace, as it
- * makes things easier to follow, without running it through objdump
- * These are the normal instructions which cause change of flow, which
- * would be at the source of the trace buffer
- */
-#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
-static void decode_instruction(unsigned short *address)
-{
-	unsigned short opcode;
-
-	if (get_instruction(&opcode, address)) {
-		if (opcode == 0x0010)
-			verbose_printk("RTS");
-		else if (opcode == 0x0011)
-			verbose_printk("RTI");
-		else if (opcode == 0x0012)
-			verbose_printk("RTX");
-		else if (opcode == 0x0013)
-			verbose_printk("RTN");
-		else if (opcode == 0x0014)
-			verbose_printk("RTE");
-		else if (opcode == 0x0025)
-			verbose_printk("EMUEXCPT");
-		else if (opcode >= 0x0040 && opcode <= 0x0047)
-			verbose_printk("STI R%i", opcode & 7);
-		else if (opcode >= 0x0050 && opcode <= 0x0057)
-			verbose_printk("JUMP (P%i)", opcode & 7);
-		else if (opcode >= 0x0060 && opcode <= 0x0067)
-			verbose_printk("CALL (P%i)", opcode & 7);
-		else if (opcode >= 0x0070 && opcode <= 0x0077)
-			verbose_printk("CALL (PC+P%i)", opcode & 7);
-		else if (opcode >= 0x0080 && opcode <= 0x0087)
-			verbose_printk("JUMP (PC+P%i)", opcode & 7);
-		else if (opcode >= 0x0090 && opcode <= 0x009F)
-			verbose_printk("RAISE 0x%x", opcode & 0xF);
-		else if (opcode >= 0x00A0 && opcode <= 0x00AF)
-			verbose_printk("EXCPT 0x%x", opcode & 0xF);
-		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
-			verbose_printk("IF !CC JUMP");
-		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
-			verbose_printk("IF CC JUMP");
-		else if (opcode >= 0x2000 && opcode <= 0x2fff)
-			verbose_printk("JUMP.S");
-		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
-			verbose_printk("LSETUP");
-		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
-			verbose_printk("JUMP.L");
-		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
-			verbose_printk("CALL pcrel");
-		else
-			verbose_printk("0x%04x", opcode);
-	}
-
-}
-#endif
-
-void dump_bfin_trace_buffer(void)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags, i = 0;
-	char buf[150];
-	unsigned short *addr;
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	int j, index;
-#endif
-
-	trace_buffer_save(tflags);
-
-	printk(KERN_NOTICE "Hardware Trace:\n");
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
-#endif
-
-	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
-		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			addr = (unsigned short *)bfin_read_TBUF();
-			decode_address(buf, (unsigned long)addr);
-			printk(KERN_NOTICE "     Source : %s ", buf);
-			decode_instruction(addr);
-			printk("\n");
-		}
-	}
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	if (trace_buff_offset)
-		index = trace_buff_offset / 4;
-	else
-		index = EXPAND_LEN;
-
-	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
-	while (j) {
-		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-		index -= 1;
-		if (index < 0 )
-			index = EXPAND_LEN;
-		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "     Source : %s ", buf);
-		decode_instruction((unsigned short *)software_trace_buff[index]);
-		printk("\n");
-		index -= 1;
-		if (index < 0)
-			index = EXPAND_LEN;
-		j--;
-		i++;
-	}
-#endif
-
-	trace_buffer_restore(tflags);
-#endif
-#endif
-}
-EXPORT_SYMBOL(dump_bfin_trace_buffer);
-
-#ifdef CONFIG_BUG
-int is_valid_bugaddr(unsigned long addr)
-{
-	unsigned short opcode;
-
-	if (!get_instruction(&opcode, (unsigned short *)addr))
-		return 0;
-
-	return opcode == BFIN_BUG_OPCODE;
-}
-#endif
-
-/*
- * Checks to see if the address pointed to is either a
- * 16-bit CALL instruction, or a 32-bit CALL instruction
- */
-static bool is_bfin_call(unsigned short *addr)
-{
-	unsigned short opcode = 0, *ins_addr;
-	ins_addr = (unsigned short *)addr;
-
-	if (!get_instruction(&opcode, ins_addr))
-		return false;
-
-	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
-	    (opcode >= 0x0070 && opcode <= 0x0077))
-		return true;
-
-	ins_addr--;
-	if (!get_instruction(&opcode, ins_addr))
-		return false;
-
-	if (opcode >= 0xE300 && opcode <= 0xE3FF)
-		return true;
-
-	return false;
-
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-#ifdef CONFIG_PRINTK
-	unsigned int *addr, *endstack, *fp = 0, *frame;
-	unsigned short *ins_addr;
-	char buf[150];
-	unsigned int i, j, ret_addr, frame_no = 0;
-
-	/*
-	 * If we have been passed a specific stack, use that one otherwise
-	 *    if we have been passed a task structure, use that, otherwise
-	 *    use the stack of where the variable "stack" exists
-	 */
-
-	if (stack == NULL) {
-		if (task) {
-			/* We know this is a kernel stack, so this is the start/end */
-			stack = (unsigned long *)task->thread.ksp;
-			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
-		} else {
-			/* print out the existing stack info */
-			stack = (unsigned long *)&stack;
-			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-		}
-	} else
-		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-
-	printk(KERN_NOTICE "Stack info:\n");
-	decode_address(buf, (unsigned int)stack);
-	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
-
-	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
-		printk(KERN_NOTICE "Invalid stack pointer\n");
-		return;
-	}
-
-	/* First thing is to look for a frame pointer */
-	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
-		if (*addr & 0x1)
-			continue;
-		ins_addr = (unsigned short *)*addr;
-		ins_addr--;
-		if (is_bfin_call(ins_addr))
-			fp = addr - 1;
-
-		if (fp) {
-			/* Let's check to see if it is a frame pointer */
-			while (fp >= (addr - 1) && fp < endstack
-			       && fp && ((unsigned int) fp & 0x3) == 0)
-				fp = (unsigned int *)*fp;
-			if (fp == 0 || fp == endstack) {
-				fp = addr - 1;
-				break;
-			}
-			fp = 0;
-		}
-	}
-	if (fp) {
-		frame = fp;
-		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
-	} else
-		frame = 0;
-
-	/*
-	 * Now that we think we know where things are, we
-	 * walk the stack again, this time printing things out
-	 * incase there is no frame pointer, we still look for
-	 * valid return addresses
-	 */
-
-	/* First time print out data, next time, print out symbols */
-	for (j = 0; j <= 1; j++) {
-		if (j)
-			printk(KERN_NOTICE "Return addresses in stack:\n");
-		else
-			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
-
-		fp = frame;
-		frame_no = 0;
-
-		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		     addr < endstack; addr++, i++) {
-
-			ret_addr = 0;
-			if (!j && i % 8 == 0)
-				printk(KERN_NOTICE "%p:",addr);
-
-			/* if it is an odd address, or zero, just skip it */
-			if (*addr & 0x1 || !*addr)
-				goto print;
-
-			ins_addr = (unsigned short *)*addr;
-
-			/* Go back one instruction, and see if it is a CALL */
-			ins_addr--;
-			ret_addr = is_bfin_call(ins_addr);
- print:
-			if (!j && stack == (unsigned long *)addr)
-				printk("[%08x]", *addr);
-			else if (ret_addr)
-				if (j) {
-					decode_address(buf, (unsigned int)*addr);
-					if (frame == addr) {
-						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
-						continue;
-					}
-					printk(KERN_NOTICE "    address : %s\n", buf);
-				} else
-					printk("<%08x>", *addr);
-			else if (fp == addr) {
-				if (j)
-					frame = addr+1;
-				else
-					printk("(%08x)", *addr);
-
-				fp = (unsigned int *)*addr;
-				frame_no++;
-
-			} else if (!j)
-				printk(" %08x ", *addr);
-		}
-		if (!j)
-			printk("\n");
-	}
-#endif
-}
-EXPORT_SYMBOL(show_stack);
-
-void dump_stack(void)
+asmlinkage void double_fault_c(struct pt_regs *fp)
 {
-	unsigned long stack;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags;
+	int j;
+	trace_buffer_save(j);
 #endif
-	trace_buffer_save(tflags);
-	dump_bfin_trace_buffer();
-	show_stack(current, &stack);
-	trace_buffer_restore(tflags);
-}
-EXPORT_SYMBOL(dump_stack);
 
-void dump_bfin_process(struct pt_regs *fp)
-{
+	console_verbose();
+	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	/* We should be able to look at fp->ipend, but we don't push it on the
-	 * stack all the time, so do this until we fix that */
-	unsigned int context = bfin_read_IPEND();
-
-	if (oops_in_progress)
-		verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
-
-	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
-		verbose_printk(KERN_NOTICE "HW Error context\n");
-	else if (context & 0x0020)
-		verbose_printk(KERN_NOTICE "Deferred Exception context\n");
-	else if (context & 0x3FC0)
-		verbose_printk(KERN_NOTICE "Interrupt context\n");
-	else if (context & 0x4000)
-		verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
-	else if (context & 0x8000)
-		verbose_printk(KERN_NOTICE "Kernel process context\n");
-
-	/* Because we are crashing, and pointers could be bad, we check things
-	 * pretty closely before we use them
-	 */
-	if ((unsigned long)current >= FIXED_CODE_START &&
-	    !((unsigned long)current & 0x3) && current->pid) {
-		verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
-		if (current->comm >= (char *)FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
-				current->comm, current->pid);
-		else
-			verbose_printk(KERN_NOTICE "COMM= invalid");
+	printk(KERN_EMERG "Double Fault\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+		unsigned int cpu = raw_smp_processor_id();
+		char buf[150];
+		decode_address(buf, cpu_pda[cpu].retx_doublefault);
+		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
 
-		printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
-		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE
-				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
-				(void *)current->mm->start_code,
-				(void *)current->mm->end_code,
-				(void *)current->mm->start_data,
-				(void *)current->mm->end_data,
-				(void *)current->mm->end_data,
-				(void *)current->mm->brk,
-				(void *)current->mm->start_stack);
-		else
-			verbose_printk(KERN_NOTICE "invalid mm\n");
+		decode_address(buf, fp->retx);
+		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
 	} else
-		verbose_printk(KERN_NOTICE
-			       "No Valid process in current context\n");
-#endif
-}
-
-void dump_bfin_mem(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	unsigned short *addr, *erraddr, val = 0, err = 0;
-	char sti = 0, buf[6];
-
-	erraddr = (void *)fp->pc;
-
-	verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
-
-	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
-	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
-	     addr++) {
-		if (!((unsigned long)addr & 0xF))
-			verbose_printk(KERN_NOTICE "0x%p: ", addr);
-
-		if (!get_instruction(&val, addr)) {
-				val = 0;
-				sprintf(buf, "????");
-		} else
-			sprintf(buf, "%04x", val);
-
-		if (addr == erraddr) {
-			verbose_printk("[%s]", buf);
-			err = val;
-		} else
-			verbose_printk(" %s ", buf);
-
-		/* Do any previous instructions turn on interrupts? */
-		if (addr <= erraddr &&				/* in the past */
-		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
-		      val == 0x017b))				/* [SP++] = RETI */
-			sti = 1;
-	}
-
-	verbose_printk("\n");
-
-	/* Hardware error interrupts can be deferred */
-	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
-	    oops_in_progress)){
-		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
-#ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE
-"The remaining message may be meaningless\n"
-"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
-#else
-		/* If we are handling only one peripheral interrupt
-		 * and current mm and pid are valid, and the last error
-		 * was in that user space process's text area
-		 * print it out - because that is where the problem exists
-		 */
-		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
-		     (current->pid && current->mm)) {
-			/* And the last RETI points to the current userspace context */
-			if ((fp + 1)->pc >= current->mm->start_code &&
-			    (fp + 1)->pc <= current->mm->end_code) {
-				verbose_printk(KERN_NOTICE "It might be better to look around here :\n");
-				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
-				show_regs(fp + 1);
-				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
-			}
-		}
-#endif
-	}
-#endif
-}
-
-void show_regs(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	char buf [150];
-	struct irqaction *action;
-	unsigned int i;
-	unsigned long flags = 0;
-	unsigned int cpu = raw_smp_processor_id();
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-
-	verbose_printk(KERN_NOTICE "\n");
-	if (CPUID != bfin_cpuid())
-		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
-			"but running on:0x%04x (Rev %d)\n",
-			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
-
-	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
-		CPU, bfin_compiled_revid());
-
-	if (bfin_compiled_revid() !=  bfin_revid())
-		verbose_printk("(Detected 0.%d)", bfin_revid());
-
-	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
-		get_cclk()/1000000, get_sclk()/1000000,
-#ifdef CONFIG_MPU
-		"mpu on"
-#else
-		"mpu off"
-#endif
-		);
-
-	verbose_printk(KERN_NOTICE "%s", linux_banner);
-
-	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
-	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
-	if (fp->ipend & EVT_IRPTEN)
-		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
-			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
-		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
-		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
-	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
-		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
-			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
-#ifdef EBIU_ERRMST
-		/* If the error was from the EBIU, print it out */
-		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
-			verbose_printk(KERN_NOTICE "  EBIU Error Reason  : 0x%04x\n",
-				bfin_read_EBIU_ERRMST());
-			verbose_printk(KERN_NOTICE "  EBIU Error Address : 0x%08x\n",
-				bfin_read_EBIU_ERRADD());
-		}
 #endif
+	{
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+		dump_bfin_trace_buffer();
 	}
-	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
-		fp->seqstat & SEQSTAT_EXCAUSE);
-	for (i = 2; i <= 15 ; i++) {
-		if (fp->ipend & (1 << i)) {
-			if (i != 4) {
-				decode_address(buf, bfin_read32(EVT0 + 4*i));
-				verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
-			} else
-				verbose_printk(KERN_NOTICE "  interrupts disabled\n");
-		}
-	}
-
-	/* if no interrupts are going off, don't print this out */
-	if (fp->ipend & ~0x3F) {
-		for (i = 0; i < (NR_IRQS - 1); i++) {
-			if (!in_atomic)
-				raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-
-			action = irq_desc[i].action;
-			if (!action)
-				goto unlock;
-
-			decode_address(buf, (unsigned int)action->handler);
-			verbose_printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
-			for (action = action->next; action; action = action->next) {
-				decode_address(buf, (unsigned int)action->handler);
-				verbose_printk(", %s", buf);
-			}
-			verbose_printk("\n");
-unlock:
-			if (!in_atomic)
-				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-		}
-	}
-
-	decode_address(buf, fp->rete);
-	verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
-	decode_address(buf, fp->retn);
-	verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
-	decode_address(buf, fp->retx);
-	verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
-	decode_address(buf, fp->rets);
-	verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
-	decode_address(buf, fp->pc);
-	verbose_printk(KERN_NOTICE " PC  : %s\n", buf);
-
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
-	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
-		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
-		verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
-		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
-	}
-
-	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
-	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
-		fp->r0, fp->r1, fp->r2, fp->r3);
-	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
-		fp->r4, fp->r5, fp->r6, fp->r7);
-	verbose_printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
-		fp->p0, fp->p1, fp->p2, fp->p3);
-	verbose_printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
-		fp->p4, fp->p5, fp->fp, (long)fp);
-	verbose_printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
-		fp->lb0, fp->lt0, fp->lc0);
-	verbose_printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
-		fp->lb1, fp->lt1, fp->lc1);
-	verbose_printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
-		fp->b0, fp->l0, fp->m0, fp->i0);
-	verbose_printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
-		fp->b1, fp->l1, fp->m1, fp->i1);
-	verbose_printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
-		fp->b2, fp->l2, fp->m2, fp->i2);
-	verbose_printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
-		fp->b3, fp->l3, fp->m3, fp->i3);
-	verbose_printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
-		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
-
-	verbose_printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
-		rdusp(), fp->astat);
-
-	verbose_printk(KERN_NOTICE "\n");
 #endif
-}
-
-#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
-asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
-#endif
-
-static DEFINE_SPINLOCK(bfin_spinlock_lock);
-
-asmlinkage int sys_bfin_spinlock(int *p)
-{
-	int ret, tmp = 0;
-
-	spin_lock(&bfin_spinlock_lock);	/* This would also hold kernel preemption. */
-	ret = get_user(tmp, p);
-	if (likely(ret == 0)) {
-		if (unlikely(tmp))
-			ret = 1;
-		else
-			put_user(1, p);
-	}
-	spin_unlock(&bfin_spinlock_lock);
-	return ret;
-}
-
-int bfin_request_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
-
-	if (curr_handler != ex_replaceable)
-		return -EBUSY;
-
-	ex_table[exception] = handler;
+	panic("Double Fault - unrecoverable event");
 
-	return 0;
 }
-EXPORT_SYMBOL(bfin_request_exception);
-
-int bfin_free_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
 
-	if (curr_handler != handler)
-		return -EBUSY;
-
-	ex_table[exception] = ex_replaceable;
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_free_exception);
 
 void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 {
@@ -1349,3 +559,23 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 	dump_stack();
 	panic("Unrecoverable event");
 }
+
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
+/* stub this out */
+#ifndef CONFIG_DEBUG_VERBOSE
+void show_regs(struct pt_regs *fp)
+{
+
+}
+#endif
diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S
index c30d99b1096..eab1bef3f5b 100644
--- a/arch/blackfin/lib/memset.S
+++ b/arch/blackfin/lib/memset.S
@@ -20,6 +20,7 @@
  * R1 = filler byte
  * R2 = count
  * Favours word aligned data.
+ * The strncpy assumes that I0 and I1 are not used in this function
  */
 
 ENTRY(_memset)
diff --git a/arch/blackfin/lib/strcmp.S b/arch/blackfin/lib/strcmp.S
new file mode 100644
index 00000000000..d7c1d158973
--- /dev/null
+++ b/arch/blackfin/lib/strcmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcmp(char *s1, const char *s2);
+ * R0 = address (s1)
+ * R1 = address (s2)
+ *
+ * Returns an integer less than, equal to, or greater than zero if s1
+ *  (or the first n  bytes thereof) is found, respectively, to be less
+ *  than, to match, or be greater than s2.
+ */
+
+#ifdef CONFIG_STRCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcmp)
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 2f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if cc jump 1b (bp);    /* no, keep going */
+	jump.s 3f;             /* strings are equal */
+2:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+3:
+	RTS;
+
+ENDPROC(_strcmp)
diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c
deleted file mode 100644
index fde39a1950c..00000000000
--- a/arch/blackfin/lib/strcmp.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strcmp __inline_strcmp
-#include <asm/string.h>
-#undef strcmp
-
-#include <linux/module.h>
-
-int strcmp(const char *dest, const char *src)
-{
-	return __inline_strcmp(dest, src);
-}
-EXPORT_SYMBOL(strcmp);
diff --git a/arch/blackfin/lib/strcpy.S b/arch/blackfin/lib/strcpy.S
new file mode 100644
index 00000000000..a6a0c636380
--- /dev/null
+++ b/arch/blackfin/lib/strcpy.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcpy(char *dest, const char *src);
+ * R0 = address (dest)
+ * R1 = address (src)
+ *
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcpy)
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1;
+	if cc jump 1b (bp);
+	RTS;
+
+ENDPROC(_strcpy)
diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c
deleted file mode 100644
index 2a8836b1f4d..00000000000
--- a/arch/blackfin/lib/strcpy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strcpy __inline_strcpy
-#include <asm/string.h>
-#undef strcpy
-
-#include <linux/module.h>
-
-char *strcpy(char *dest, const char *src)
-{
-	return __inline_strcpy(dest, src);
-}
-EXPORT_SYMBOL(strcpy);
diff --git a/arch/blackfin/lib/strncmp.S b/arch/blackfin/lib/strncmp.S
new file mode 100644
index 00000000000..6da37c34a84
--- /dev/null
+++ b/arch/blackfin/lib/strncmp.S
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strncpy(char *s1, const char *s2, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size (n)
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRNCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncmp)
+	CC = R2 == 0;
+	if CC JUMP 5f;
+
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 3f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if ! cc jump 4f;       /* yes, all done */
+	R2 += -1;              /* no, adjust count */
+	CC = R2 == 0;
+	if ! cc jump 1b (bp);  /* more to do, keep going */
+2:
+	R0 = 0;                /* strings are equal */
+	jump.s 4f;
+3:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+4:
+	RTS;
+
+5:
+	R0 = 0;
+	RTS;
+
+ENDPROC(_strncmp)
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
deleted file mode 100644
index 46518b1d298..00000000000
--- a/arch/blackfin/lib/strncmp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strncmp __inline_strncmp
-#include <asm/string.h>
-#include <linux/module.h>
-#undef strncmp
-
-int strncmp(const char *cs, const char *ct, size_t count)
-{
-	return __inline_strncmp(cs, ct, count);
-}
-EXPORT_SYMBOL(strncmp);
diff --git a/arch/blackfin/lib/strncpy.S b/arch/blackfin/lib/strncpy.S
new file mode 100644
index 00000000000..f3931d50b4a
--- /dev/null
+++ b/arch/blackfin/lib/strncpy.S
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+#include <asm/context.S>
+
+/* void *strncpy(char *dest, const char *src, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size
+ * Returns a pointer (R0) to the destination string dest
+ *  we do this by not changing R0
+ */
+
+#ifdef CONFIG_STRNCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncpy)
+	CC = R2 == 0;
+	if CC JUMP 4f;
+
+	P2 = R2 ;       /* size */
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+	LSETUP (1f, 2f) LC0 = P2;
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1 == 0;
+2:
+	if CC jump 3f;
+
+	RTS;
+
+	/* if src is shorter than n, we need to null pad bytes in dest
+	 * but, we can get here when the last byte is zero, and we don't
+	 * want to copy an extra byte at the end, so we need to check
+	 */
+3:
+	R2 = LC0;
+	CC = R2
+	if ! CC jump 6f;
+
+	/* if the required null padded portion is small, do it here, rather than
+	 * handling the overhead of memset (which is OK when things are big).
+	 */
+	R3 = 0x20;
+	CC = R2 < R3;
+	IF CC jump 4f;
+
+	R2 += -1;
+
+	/* Set things up for memset
+	 * R0 = address
+	 * R1 = filler byte (this case it's zero, set above)
+	 * R2 = count (set above)
+	 */
+
+	I1 = R0;
+	R0 = RETS;
+	I0 = R0;
+	R0 = P0;
+	pseudo_long_call _memset, p0;
+	R0 = I0;
+	RETS = R0;
+	R0 = I1;
+	RTS;
+
+4:
+	LSETUP(5f, 5f) LC0;
+5:
+	B [P0++] = R1;
+6:
+	RTS;
+
+ENDPROC(_strncpy)
diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c
deleted file mode 100644
index ea1dc6bf237..00000000000
--- a/arch/blackfin/lib/strncpy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strncpy __inline_strncpy
-#include <asm/string.h>
-#undef strncpy
-
-#include <linux/module.h>
-
-char *strncpy(char *dest, const char *src, size_t n)
-{
-	return __inline_strncpy(dest, src, n);
-}
-EXPORT_SYMBOL(strncpy);
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index ebe76d1e874..f392af64165 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -98,6 +98,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PF11,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 55069af4f67..606eb36b9d6 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -62,6 +62,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 923383386aa..a05c967a24c 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -102,6 +102,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index c489d602c59..05d45994480 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -23,12 +23,13 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-char *bfin_board_name = "CamSig Minotaur BF537";
+const char bfin_board_name[] = "CamSig Minotaur BF537";
 
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 066d5c261f4..cf396ea4009 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1702,628 +1702,6 @@
 #define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
 #define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
 
-/* ************  CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
-/* CAN_CONTROL Masks												*/
-#define	SRS			0x0001	/* Software Reset                                               */
-#define	DNM			0x0002	/* Device Net Mode                                              */
-#define	ABO			0x0004	/* Auto-Bus On Enable                                   */
-#define	TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*)              */
-#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable   */
-#define	SMR			0x0020	/* Sleep Mode Request                                   */
-#define	CSR			0x0040	/* CAN Suspend Mode Request                             */
-#define	CCR			0x0080	/* CAN Configuration Mode Request               */
-
-/* CAN_STATUS Masks												*/
-#define	WT			0x0001	/* TX Warning Flag                                      */
-#define	WR			0x0002	/* RX Warning Flag                                      */
-#define	EP			0x0004	/* Error Passive Mode                           */
-#define	EBO			0x0008	/* Error Bus Off Mode                           */
-#define	SMA			0x0020	/* Sleep Mode Acknowledge                       */
-#define	CSA			0x0040	/* Suspend Mode Acknowledge                     */
-#define	CCA			0x0080	/* Configuration Mode Acknowledge       */
-#define	MBPTR		0x1F00	/* Mailbox Pointer                                      */
-#define	TRM			0x4000	/* Transmit Mode                                        */
-#define	REC			0x8000	/* Receive Mode                                         */
-
-/* CAN_CLOCK Masks									*/
-#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler  */
-
-/* CAN_TIMING Masks											*/
-#define	TSEG1		0x000F	/* Time Segment 1                               */
-#define	TSEG2		0x0070	/* Time Segment 2                               */
-#define	SAM			0x0080	/* Sampling                                             */
-#define	SJW			0x0300	/* Synchronization Jump Width   */
-
-/* CAN_DEBUG Masks											*/
-#define	DEC			0x0001	/* Disable CAN Error Counters   */
-#define	DRI			0x0002	/* Disable CAN RX Input                 */
-#define	DTO			0x0004	/* Disable CAN TX Output                */
-#define	DIL			0x0008	/* Disable CAN Internal Loop    */
-#define	MAA			0x0010	/* Mode Auto-Acknowledge Enable */
-#define	MRB			0x0020	/* Mode Read Back Enable                */
-#define	CDE			0x8000	/* CAN Debug Enable                             */
-
-/* CAN_CEC Masks										*/
-#define	RXECNT		0x00FF	/* Receive Error Counter        */
-#define	TXECNT		0xFF00	/* Transmit Error Counter       */
-
-/* CAN_INTR Masks											*/
-#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt	*/
-#define	MBRIF		MBRIRQ	/* legacy */
-#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt	*/
-#define	MBTIF		MBTIRQ	/* legacy */
-#define	GIRQ		0x0004	/* Global Interrupt                             */
-#define	SMACK		0x0008	/* Sleep Mode Acknowledge               */
-#define	CANTX		0x0040	/* CAN TX Bus Value                             */
-#define	CANRX		0x0080	/* CAN RX Bus Value                             */
-
-/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks										*/
-#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0)               */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0)   */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1)    */
-#define	BASEID		0x1FFC	/* Base Identifier                                                              */
-#define	IDE			0x2000	/* Identifier Extension                                                 */
-#define	RTR			0x4000	/* Remote Frame Transmission Request                    */
-#define	AME			0x8000	/* Acceptance Mask Enable                                               */
-
-/* CAN_MBxx_TIMESTAMP Masks					*/
-#define TSV			0xFFFF	/* Timestamp    */
-
-/* CAN_MBxx_LENGTH Masks						*/
-#define DLC			0x000F	/* Data Length Code     */
-
-/* CAN_AMxxH and CAN_AMxxL Masks												*/
-#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL)                     */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL)     */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH)      */
-#define	BASEID		0x1FFC	/* Base Identifier                                                                      */
-#define	AMIDE		0x2000	/* Acceptance Mask ID Extension Enable                          */
-#define	FMD			0x4000	/* Full Mask Data Field Enable                                          */
-#define	FDF			0x8000	/* Filter On Data Field Enable                                          */
-
-/* CAN_MC1 Masks									*/
-#define	MC0			0x0001	/* Enable Mailbox 0             */
-#define	MC1			0x0002	/* Enable Mailbox 1             */
-#define	MC2			0x0004	/* Enable Mailbox 2             */
-#define	MC3			0x0008	/* Enable Mailbox 3             */
-#define	MC4			0x0010	/* Enable Mailbox 4             */
-#define	MC5			0x0020	/* Enable Mailbox 5             */
-#define	MC6			0x0040	/* Enable Mailbox 6             */
-#define	MC7			0x0080	/* Enable Mailbox 7             */
-#define	MC8			0x0100	/* Enable Mailbox 8             */
-#define	MC9			0x0200	/* Enable Mailbox 9             */
-#define	MC10		0x0400	/* Enable Mailbox 10    */
-#define	MC11		0x0800	/* Enable Mailbox 11    */
-#define	MC12		0x1000	/* Enable Mailbox 12    */
-#define	MC13		0x2000	/* Enable Mailbox 13    */
-#define	MC14		0x4000	/* Enable Mailbox 14    */
-#define	MC15		0x8000	/* Enable Mailbox 15    */
-
-/* CAN_MC2 Masks									*/
-#define	MC16		0x0001	/* Enable Mailbox 16    */
-#define	MC17		0x0002	/* Enable Mailbox 17    */
-#define	MC18		0x0004	/* Enable Mailbox 18    */
-#define	MC19		0x0008	/* Enable Mailbox 19    */
-#define	MC20		0x0010	/* Enable Mailbox 20    */
-#define	MC21		0x0020	/* Enable Mailbox 21    */
-#define	MC22		0x0040	/* Enable Mailbox 22    */
-#define	MC23		0x0080	/* Enable Mailbox 23    */
-#define	MC24		0x0100	/* Enable Mailbox 24    */
-#define	MC25		0x0200	/* Enable Mailbox 25    */
-#define	MC26		0x0400	/* Enable Mailbox 26    */
-#define	MC27		0x0800	/* Enable Mailbox 27    */
-#define	MC28		0x1000	/* Enable Mailbox 28    */
-#define	MC29		0x2000	/* Enable Mailbox 29    */
-#define	MC30		0x4000	/* Enable Mailbox 30    */
-#define	MC31		0x8000	/* Enable Mailbox 31    */
-
-/* CAN_MD1 Masks												*/
-#define	MD0			0x0001	/* Enable Mailbox 0 For Receive         */
-#define	MD1			0x0002	/* Enable Mailbox 1 For Receive         */
-#define	MD2			0x0004	/* Enable Mailbox 2 For Receive         */
-#define	MD3			0x0008	/* Enable Mailbox 3 For Receive         */
-#define	MD4			0x0010	/* Enable Mailbox 4 For Receive         */
-#define	MD5			0x0020	/* Enable Mailbox 5 For Receive         */
-#define	MD6			0x0040	/* Enable Mailbox 6 For Receive         */
-#define	MD7			0x0080	/* Enable Mailbox 7 For Receive         */
-#define	MD8			0x0100	/* Enable Mailbox 8 For Receive         */
-#define	MD9			0x0200	/* Enable Mailbox 9 For Receive         */
-#define	MD10		0x0400	/* Enable Mailbox 10 For Receive        */
-#define	MD11		0x0800	/* Enable Mailbox 11 For Receive        */
-#define	MD12		0x1000	/* Enable Mailbox 12 For Receive        */
-#define	MD13		0x2000	/* Enable Mailbox 13 For Receive        */
-#define	MD14		0x4000	/* Enable Mailbox 14 For Receive        */
-#define	MD15		0x8000	/* Enable Mailbox 15 For Receive        */
-
-/* CAN_MD2 Masks												*/
-#define	MD16		0x0001	/* Enable Mailbox 16 For Receive        */
-#define	MD17		0x0002	/* Enable Mailbox 17 For Receive        */
-#define	MD18		0x0004	/* Enable Mailbox 18 For Receive        */
-#define	MD19		0x0008	/* Enable Mailbox 19 For Receive        */
-#define	MD20		0x0010	/* Enable Mailbox 20 For Receive        */
-#define	MD21		0x0020	/* Enable Mailbox 21 For Receive        */
-#define	MD22		0x0040	/* Enable Mailbox 22 For Receive        */
-#define	MD23		0x0080	/* Enable Mailbox 23 For Receive        */
-#define	MD24		0x0100	/* Enable Mailbox 24 For Receive        */
-#define	MD25		0x0200	/* Enable Mailbox 25 For Receive        */
-#define	MD26		0x0400	/* Enable Mailbox 26 For Receive        */
-#define	MD27		0x0800	/* Enable Mailbox 27 For Receive        */
-#define	MD28		0x1000	/* Enable Mailbox 28 For Receive        */
-#define	MD29		0x2000	/* Enable Mailbox 29 For Receive        */
-#define	MD30		0x4000	/* Enable Mailbox 30 For Receive        */
-#define	MD31		0x8000	/* Enable Mailbox 31 For Receive        */
-
-/* CAN_RMP1 Masks												*/
-#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0      */
-#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1      */
-#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2      */
-#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3      */
-#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4      */
-#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5      */
-#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6      */
-#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7      */
-#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8      */
-#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9      */
-#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10     */
-#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11     */
-#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12     */
-#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13     */
-#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14     */
-#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15     */
-
-/* CAN_RMP2 Masks												*/
-#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16     */
-#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17     */
-#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18     */
-#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19     */
-#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20     */
-#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21     */
-#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22     */
-#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23     */
-#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24     */
-#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25     */
-#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26     */
-#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27     */
-#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28     */
-#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29     */
-#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30     */
-#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31     */
-
-/* CAN_RML1 Masks												*/
-#define	RML0		0x0001	/* RX Message Lost In Mailbox 0         */
-#define	RML1		0x0002	/* RX Message Lost In Mailbox 1         */
-#define	RML2		0x0004	/* RX Message Lost In Mailbox 2         */
-#define	RML3		0x0008	/* RX Message Lost In Mailbox 3         */
-#define	RML4		0x0010	/* RX Message Lost In Mailbox 4         */
-#define	RML5		0x0020	/* RX Message Lost In Mailbox 5         */
-#define	RML6		0x0040	/* RX Message Lost In Mailbox 6         */
-#define	RML7		0x0080	/* RX Message Lost In Mailbox 7         */
-#define	RML8		0x0100	/* RX Message Lost In Mailbox 8         */
-#define	RML9		0x0200	/* RX Message Lost In Mailbox 9         */
-#define	RML10		0x0400	/* RX Message Lost In Mailbox 10        */
-#define	RML11		0x0800	/* RX Message Lost In Mailbox 11        */
-#define	RML12		0x1000	/* RX Message Lost In Mailbox 12        */
-#define	RML13		0x2000	/* RX Message Lost In Mailbox 13        */
-#define	RML14		0x4000	/* RX Message Lost In Mailbox 14        */
-#define	RML15		0x8000	/* RX Message Lost In Mailbox 15        */
-
-/* CAN_RML2 Masks												*/
-#define	RML16		0x0001	/* RX Message Lost In Mailbox 16        */
-#define	RML17		0x0002	/* RX Message Lost In Mailbox 17        */
-#define	RML18		0x0004	/* RX Message Lost In Mailbox 18        */
-#define	RML19		0x0008	/* RX Message Lost In Mailbox 19        */
-#define	RML20		0x0010	/* RX Message Lost In Mailbox 20        */
-#define	RML21		0x0020	/* RX Message Lost In Mailbox 21        */
-#define	RML22		0x0040	/* RX Message Lost In Mailbox 22        */
-#define	RML23		0x0080	/* RX Message Lost In Mailbox 23        */
-#define	RML24		0x0100	/* RX Message Lost In Mailbox 24        */
-#define	RML25		0x0200	/* RX Message Lost In Mailbox 25        */
-#define	RML26		0x0400	/* RX Message Lost In Mailbox 26        */
-#define	RML27		0x0800	/* RX Message Lost In Mailbox 27        */
-#define	RML28		0x1000	/* RX Message Lost In Mailbox 28        */
-#define	RML29		0x2000	/* RX Message Lost In Mailbox 29        */
-#define	RML30		0x4000	/* RX Message Lost In Mailbox 30        */
-#define	RML31		0x8000	/* RX Message Lost In Mailbox 31        */
-
-/* CAN_OPSS1 Masks																				*/
-#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0       */
-#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1       */
-#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2       */
-#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3       */
-#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4       */
-#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5       */
-#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6       */
-#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7       */
-#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8       */
-#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9       */
-#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10      */
-#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11      */
-#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12      */
-#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13      */
-#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14      */
-#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15      */
-
-/* CAN_OPSS2 Masks																				*/
-#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16      */
-#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17      */
-#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18      */
-#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19      */
-#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20      */
-#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21      */
-#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22      */
-#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23      */
-#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24      */
-#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25      */
-#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26      */
-#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27      */
-#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28      */
-#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29      */
-#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30      */
-#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31      */
-
-/* CAN_TRR1 Masks														*/
-#define	TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0      */
-#define	TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1      */
-#define	TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2      */
-#define	TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3      */
-#define	TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4      */
-#define	TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5      */
-#define	TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6      */
-#define	TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7      */
-#define	TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8      */
-#define	TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9      */
-#define	TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10     */
-#define	TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11     */
-#define	TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12     */
-#define	TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13     */
-#define	TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14     */
-#define	TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15     */
-
-/* CAN_TRR2 Masks														*/
-#define	TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16     */
-#define	TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17     */
-#define	TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18     */
-#define	TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19     */
-#define	TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20     */
-#define	TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21     */
-#define	TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22     */
-#define	TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23     */
-#define	TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24     */
-#define	TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25     */
-#define	TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26     */
-#define	TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27     */
-#define	TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28     */
-#define	TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29     */
-#define	TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30     */
-#define	TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31     */
-
-/* CAN_TRS1 Masks													*/
-#define	TRS0		0x0001	/* Remote Frame Request For Mailbox 0   */
-#define	TRS1		0x0002	/* Remote Frame Request For Mailbox 1   */
-#define	TRS2		0x0004	/* Remote Frame Request For Mailbox 2   */
-#define	TRS3		0x0008	/* Remote Frame Request For Mailbox 3   */
-#define	TRS4		0x0010	/* Remote Frame Request For Mailbox 4   */
-#define	TRS5		0x0020	/* Remote Frame Request For Mailbox 5   */
-#define	TRS6		0x0040	/* Remote Frame Request For Mailbox 6   */
-#define	TRS7		0x0080	/* Remote Frame Request For Mailbox 7   */
-#define	TRS8		0x0100	/* Remote Frame Request For Mailbox 8   */
-#define	TRS9		0x0200	/* Remote Frame Request For Mailbox 9   */
-#define	TRS10		0x0400	/* Remote Frame Request For Mailbox 10  */
-#define	TRS11		0x0800	/* Remote Frame Request For Mailbox 11  */
-#define	TRS12		0x1000	/* Remote Frame Request For Mailbox 12  */
-#define	TRS13		0x2000	/* Remote Frame Request For Mailbox 13  */
-#define	TRS14		0x4000	/* Remote Frame Request For Mailbox 14  */
-#define	TRS15		0x8000	/* Remote Frame Request For Mailbox 15  */
-
-/* CAN_TRS2 Masks													*/
-#define	TRS16		0x0001	/* Remote Frame Request For Mailbox 16  */
-#define	TRS17		0x0002	/* Remote Frame Request For Mailbox 17  */
-#define	TRS18		0x0004	/* Remote Frame Request For Mailbox 18  */
-#define	TRS19		0x0008	/* Remote Frame Request For Mailbox 19  */
-#define	TRS20		0x0010	/* Remote Frame Request For Mailbox 20  */
-#define	TRS21		0x0020	/* Remote Frame Request For Mailbox 21  */
-#define	TRS22		0x0040	/* Remote Frame Request For Mailbox 22  */
-#define	TRS23		0x0080	/* Remote Frame Request For Mailbox 23  */
-#define	TRS24		0x0100	/* Remote Frame Request For Mailbox 24  */
-#define	TRS25		0x0200	/* Remote Frame Request For Mailbox 25  */
-#define	TRS26		0x0400	/* Remote Frame Request For Mailbox 26  */
-#define	TRS27		0x0800	/* Remote Frame Request For Mailbox 27  */
-#define	TRS28		0x1000	/* Remote Frame Request For Mailbox 28  */
-#define	TRS29		0x2000	/* Remote Frame Request For Mailbox 29  */
-#define	TRS30		0x4000	/* Remote Frame Request For Mailbox 30  */
-#define	TRS31		0x8000	/* Remote Frame Request For Mailbox 31  */
-
-/* CAN_AA1 Masks												*/
-#define	AA0			0x0001	/* Aborted Message In Mailbox 0         */
-#define	AA1			0x0002	/* Aborted Message In Mailbox 1         */
-#define	AA2			0x0004	/* Aborted Message In Mailbox 2         */
-#define	AA3			0x0008	/* Aborted Message In Mailbox 3         */
-#define	AA4			0x0010	/* Aborted Message In Mailbox 4         */
-#define	AA5			0x0020	/* Aborted Message In Mailbox 5         */
-#define	AA6			0x0040	/* Aborted Message In Mailbox 6         */
-#define	AA7			0x0080	/* Aborted Message In Mailbox 7         */
-#define	AA8			0x0100	/* Aborted Message In Mailbox 8         */
-#define	AA9			0x0200	/* Aborted Message In Mailbox 9         */
-#define	AA10		0x0400	/* Aborted Message In Mailbox 10        */
-#define	AA11		0x0800	/* Aborted Message In Mailbox 11        */
-#define	AA12		0x1000	/* Aborted Message In Mailbox 12        */
-#define	AA13		0x2000	/* Aborted Message In Mailbox 13        */
-#define	AA14		0x4000	/* Aborted Message In Mailbox 14        */
-#define	AA15		0x8000	/* Aborted Message In Mailbox 15        */
-
-/* CAN_AA2 Masks												*/
-#define	AA16		0x0001	/* Aborted Message In Mailbox 16        */
-#define	AA17		0x0002	/* Aborted Message In Mailbox 17        */
-#define	AA18		0x0004	/* Aborted Message In Mailbox 18        */
-#define	AA19		0x0008	/* Aborted Message In Mailbox 19        */
-#define	AA20		0x0010	/* Aborted Message In Mailbox 20        */
-#define	AA21		0x0020	/* Aborted Message In Mailbox 21        */
-#define	AA22		0x0040	/* Aborted Message In Mailbox 22        */
-#define	AA23		0x0080	/* Aborted Message In Mailbox 23        */
-#define	AA24		0x0100	/* Aborted Message In Mailbox 24        */
-#define	AA25		0x0200	/* Aborted Message In Mailbox 25        */
-#define	AA26		0x0400	/* Aborted Message In Mailbox 26        */
-#define	AA27		0x0800	/* Aborted Message In Mailbox 27        */
-#define	AA28		0x1000	/* Aborted Message In Mailbox 28        */
-#define	AA29		0x2000	/* Aborted Message In Mailbox 29        */
-#define	AA30		0x4000	/* Aborted Message In Mailbox 30        */
-#define	AA31		0x8000	/* Aborted Message In Mailbox 31        */
-
-/* CAN_TA1 Masks													*/
-#define	TA0			0x0001	/* Transmit Successful From Mailbox 0   */
-#define	TA1			0x0002	/* Transmit Successful From Mailbox 1   */
-#define	TA2			0x0004	/* Transmit Successful From Mailbox 2   */
-#define	TA3			0x0008	/* Transmit Successful From Mailbox 3   */
-#define	TA4			0x0010	/* Transmit Successful From Mailbox 4   */
-#define	TA5			0x0020	/* Transmit Successful From Mailbox 5   */
-#define	TA6			0x0040	/* Transmit Successful From Mailbox 6   */
-#define	TA7			0x0080	/* Transmit Successful From Mailbox 7   */
-#define	TA8			0x0100	/* Transmit Successful From Mailbox 8   */
-#define	TA9			0x0200	/* Transmit Successful From Mailbox 9   */
-#define	TA10		0x0400	/* Transmit Successful From Mailbox 10  */
-#define	TA11		0x0800	/* Transmit Successful From Mailbox 11  */
-#define	TA12		0x1000	/* Transmit Successful From Mailbox 12  */
-#define	TA13		0x2000	/* Transmit Successful From Mailbox 13  */
-#define	TA14		0x4000	/* Transmit Successful From Mailbox 14  */
-#define	TA15		0x8000	/* Transmit Successful From Mailbox 15  */
-
-/* CAN_TA2 Masks													*/
-#define	TA16		0x0001	/* Transmit Successful From Mailbox 16  */
-#define	TA17		0x0002	/* Transmit Successful From Mailbox 17  */
-#define	TA18		0x0004	/* Transmit Successful From Mailbox 18  */
-#define	TA19		0x0008	/* Transmit Successful From Mailbox 19  */
-#define	TA20		0x0010	/* Transmit Successful From Mailbox 20  */
-#define	TA21		0x0020	/* Transmit Successful From Mailbox 21  */
-#define	TA22		0x0040	/* Transmit Successful From Mailbox 22  */
-#define	TA23		0x0080	/* Transmit Successful From Mailbox 23  */
-#define	TA24		0x0100	/* Transmit Successful From Mailbox 24  */
-#define	TA25		0x0200	/* Transmit Successful From Mailbox 25  */
-#define	TA26		0x0400	/* Transmit Successful From Mailbox 26  */
-#define	TA27		0x0800	/* Transmit Successful From Mailbox 27  */
-#define	TA28		0x1000	/* Transmit Successful From Mailbox 28  */
-#define	TA29		0x2000	/* Transmit Successful From Mailbox 29  */
-#define	TA30		0x4000	/* Transmit Successful From Mailbox 30  */
-#define	TA31		0x8000	/* Transmit Successful From Mailbox 31  */
-
-/* CAN_MBTD Masks												*/
-#define TDPTR		0x001F	/* Mailbox To Temporarily Disable       */
-#define	TDA			0x0040	/* Temporary Disable Acknowledge        */
-#define	TDR			0x0080	/* Temporary Disable Request            */
-
-/* CAN_RFH1 Masks																		*/
-#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0         */
-#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1         */
-#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2         */
-#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3         */
-#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4         */
-#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5         */
-#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6         */
-#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7         */
-#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8         */
-#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9         */
-#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10        */
-#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11        */
-#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12        */
-#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13        */
-#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14        */
-#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15        */
-
-/* CAN_RFH2 Masks																		*/
-#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16        */
-#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17        */
-#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18        */
-#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19        */
-#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20        */
-#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21        */
-#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22        */
-#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23        */
-#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24        */
-#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25        */
-#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26        */
-#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27        */
-#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28        */
-#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29        */
-#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30        */
-#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31        */
-
-/* CAN_MBTIF1 Masks													*/
-#define	MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0             */
-#define	MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1             */
-#define	MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2             */
-#define	MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3             */
-#define	MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4             */
-#define	MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5             */
-#define	MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6             */
-#define	MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7             */
-#define	MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8             */
-#define	MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9             */
-#define	MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10    */
-#define	MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11    */
-#define	MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12    */
-#define	MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13    */
-#define	MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14    */
-#define	MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15    */
-
-/* CAN_MBTIF2 Masks													*/
-#define	MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16    */
-#define	MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17    */
-#define	MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18    */
-#define	MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19    */
-#define	MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20    */
-#define	MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21    */
-#define	MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22    */
-#define	MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23    */
-#define	MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24    */
-#define	MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25    */
-#define	MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26    */
-#define	MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27    */
-#define	MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28    */
-#define	MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29    */
-#define	MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30    */
-#define	MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31    */
-
-/* CAN_MBRIF1 Masks													*/
-#define	MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0             */
-#define	MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1             */
-#define	MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2             */
-#define	MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3             */
-#define	MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4             */
-#define	MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5             */
-#define	MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6             */
-#define	MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7             */
-#define	MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8             */
-#define	MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9             */
-#define	MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10    */
-#define	MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11    */
-#define	MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12    */
-#define	MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13    */
-#define	MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14    */
-#define	MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15    */
-
-/* CAN_MBRIF2 Masks													*/
-#define	MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16    */
-#define	MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17    */
-#define	MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18    */
-#define	MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19    */
-#define	MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20    */
-#define	MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21    */
-#define	MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22    */
-#define	MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23    */
-#define	MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24    */
-#define	MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25    */
-#define	MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26    */
-#define	MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27    */
-#define	MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28    */
-#define	MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29    */
-#define	MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30    */
-#define	MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31    */
-
-/* CAN_MBIM1 Masks												*/
-#define	MBIM0		0x0001	/* Enable Interrupt For Mailbox 0       */
-#define	MBIM1		0x0002	/* Enable Interrupt For Mailbox 1       */
-#define	MBIM2		0x0004	/* Enable Interrupt For Mailbox 2       */
-#define	MBIM3		0x0008	/* Enable Interrupt For Mailbox 3       */
-#define	MBIM4		0x0010	/* Enable Interrupt For Mailbox 4       */
-#define	MBIM5		0x0020	/* Enable Interrupt For Mailbox 5       */
-#define	MBIM6		0x0040	/* Enable Interrupt For Mailbox 6       */
-#define	MBIM7		0x0080	/* Enable Interrupt For Mailbox 7       */
-#define	MBIM8		0x0100	/* Enable Interrupt For Mailbox 8       */
-#define	MBIM9		0x0200	/* Enable Interrupt For Mailbox 9       */
-#define	MBIM10		0x0400	/* Enable Interrupt For Mailbox 10      */
-#define	MBIM11		0x0800	/* Enable Interrupt For Mailbox 11      */
-#define	MBIM12		0x1000	/* Enable Interrupt For Mailbox 12      */
-#define	MBIM13		0x2000	/* Enable Interrupt For Mailbox 13      */
-#define	MBIM14		0x4000	/* Enable Interrupt For Mailbox 14      */
-#define	MBIM15		0x8000	/* Enable Interrupt For Mailbox 15      */
-
-/* CAN_MBIM2 Masks												*/
-#define	MBIM16		0x0001	/* Enable Interrupt For Mailbox 16      */
-#define	MBIM17		0x0002	/* Enable Interrupt For Mailbox 17      */
-#define	MBIM18		0x0004	/* Enable Interrupt For Mailbox 18      */
-#define	MBIM19		0x0008	/* Enable Interrupt For Mailbox 19      */
-#define	MBIM20		0x0010	/* Enable Interrupt For Mailbox 20      */
-#define	MBIM21		0x0020	/* Enable Interrupt For Mailbox 21      */
-#define	MBIM22		0x0040	/* Enable Interrupt For Mailbox 22      */
-#define	MBIM23		0x0080	/* Enable Interrupt For Mailbox 23      */
-#define	MBIM24		0x0100	/* Enable Interrupt For Mailbox 24      */
-#define	MBIM25		0x0200	/* Enable Interrupt For Mailbox 25      */
-#define	MBIM26		0x0400	/* Enable Interrupt For Mailbox 26      */
-#define	MBIM27		0x0800	/* Enable Interrupt For Mailbox 27      */
-#define	MBIM28		0x1000	/* Enable Interrupt For Mailbox 28      */
-#define	MBIM29		0x2000	/* Enable Interrupt For Mailbox 29      */
-#define	MBIM30		0x4000	/* Enable Interrupt For Mailbox 30      */
-#define	MBIM31		0x8000	/* Enable Interrupt For Mailbox 31      */
-
-/* CAN_GIM Masks																*/
-#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt                                      */
-#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt                                      */
-#define	EPIM		0x0004	/* Enable Error-Passive Mode Interrupt                          */
-#define	BOIM		0x0008	/* Enable Bus Off Interrupt                                                     */
-#define	WUIM		0x0010	/* Enable Wake-Up Interrupt                                                     */
-#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt     */
-#define	AAIM		0x0040	/* Enable Abort Acknowledge Interrupt                           */
-#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt                                     */
-#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt          */
-#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt                     */
-#define	ADIM		0x0400	/* Enable Access Denied Interrupt                                       */
-
-/* CAN_GIS Masks															*/
-#define	EWTIS		0x0001	/* TX Error Count IRQ Status                                    */
-#define	EWRIS		0x0002	/* RX Error Count IRQ Status                                    */
-#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status                                */
-#define	BOIS		0x0008	/* Bus Off IRQ Status                                                   */
-#define	WUIS		0x0010	/* Wake-Up IRQ Status                                                   */
-#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status   */
-#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status                                 */
-#define	RMLIS		0x0080	/* RX Message Lost IRQ Status                                   */
-#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status                */
-#define	EXTIS		0x0200	/* External Trigger Output IRQ Status                   */
-#define	ADIS		0x0400	/* Access Denied IRQ Status                                             */
-
-/* CAN_GIF Masks															*/
-#define	EWTIF		0x0001	/* TX Error Count IRQ Flag                                              */
-#define	EWRIF		0x0002	/* RX Error Count IRQ Flag                                              */
-#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag                                  */
-#define	BOIF		0x0008	/* Bus Off IRQ Flag                                                             */
-#define	WUIF		0x0010	/* Wake-Up IRQ Flag                                                             */
-#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag             */
-#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag                                   */
-#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag                                             */
-#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag                  */
-#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag                             */
-#define	ADIF		0x0400	/* Access Denied IRQ Flag                                               */
-
-/* CAN_UCCNF Masks															*/
-#define	UCCNF		0x000F	/* Universal Counter Mode                                               */
-#define UC_STAMP	0x0001	/*              Timestamp Mode                                                  */
-#define UC_WDOG		0x0002	/*              Watchdog Mode                                                   */
-#define UC_AUTOTX	0x0003	/*              Auto-Transmit Mode                                              */
-#define UC_ERROR	0x0006	/*              CAN Error Frame Count                                   */
-#define UC_OVER		0x0007	/*              CAN Overload Frame Count                                */
-#define UC_LOST		0x0008	/*              Arbitration Lost During TX Count                */
-#define UC_AA		0x0009	/*              TX Abort Count                                                  */
-#define UC_TA		0x000A	/*              TX Successful Count                                             */
-#define UC_REJECT	0x000B	/*              RX Message Rejected Count                               */
-#define UC_RML		0x000C	/*              RX Message Lost Count                                   */
-#define UC_RX		0x000D	/*              Total Successful RX Messages Count              */
-#define UC_RMP		0x000E	/*              Successful RX W/Matching ID Count               */
-#define UC_ALL		0x000F	/*              Correct Message On CAN Bus Line Count   */
-#define	UCRC		0x0020	/* Universal Counter Reload/Clear                               */
-#define	UCCT		0x0040	/* Universal Counter CAN Trigger                                */
-#define	UCE			0x0080	/* Universal Counter Enable                                             */
-
-/* CAN_ESR Masks										*/
-#define	ACKE		0x0004	/* Acknowledge Error            */
-#define	SER			0x0008	/* Stuff Error                          */
-#define	CRCE		0x0010	/* CRC Error                            */
-#define	SA0			0x0020	/* Stuck At Dominant Error      */
-#define	BEF			0x0040	/* Bit Error Flag                       */
-#define	FER			0x0080	/* Form Error Flag                      */
-
-/* CAN_EWR Masks												*/
-#define	EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS)     */
-#define	EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS)     */
-
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
 /* PORT_MUX Masks															*/
 #define	PJSE			0x0001	/* Port J SPI/SPORT Enable                      */
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 789a4f226f7..1a6d617c5fc 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -74,7 +74,7 @@
 
 #define IRQ_PPI_ERROR       42	/*PPI Error Interrupt */
 #define IRQ_CAN_ERROR       43	/*CAN Error Interrupt */
-#define IRQ_MAC_ERROR       44	/*PPI Error Interrupt */
+#define IRQ_MAC_ERROR       44	/*MAC Status/Error Interrupt */
 #define IRQ_SPORT0_ERROR    45	/*SPORT0 Error Interrupt */
 #define IRQ_SPORT1_ERROR    46	/*SPORT1 Error Interrupt */
 #define IRQ_SPI_ERROR       47	/*SPI Error Interrupt */
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index fac563e6f62..d7061d9f2a8 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2418,625 +2418,4 @@
 #define	RCV_HALF	0x0004		/*		Receive	FIFO Has 1 Byte	To Read */
 #define	RCV_FULL	0x000C		/*		Receive	FIFO Full (2 Bytes To Read) */
 
-
-/* ************	 CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
-/* CAN_CONTROL Masks					 */
-#define	SRS			0x0001	/* Software Reset */
-#define	DNM			0x0002	/* Device Net Mode */
-#define	ABO			0x0004	/* Auto-Bus On Enable */
-#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable */
-#define	SMR			0x0020	/* Sleep Mode Request */
-#define	CSR			0x0040	/* CAN Suspend Mode Request */
-#define	CCR			0x0080	/* CAN Configuration Mode Request */
-
-/* CAN_STATUS Masks					 */
-#define	WT			0x0001	/* TX Warning Flag */
-#define	WR			0x0002	/* RX Warning Flag */
-#define	EP			0x0004	/* Error Passive Mode */
-#define	EBO			0x0008	/* Error Bus Off Mode */
-#define	CSA			0x0040	/* Suspend Mode	Acknowledge */
-#define	CCA			0x0080	/* Configuration Mode Acknowledge */
-#define	MBPTR		0x1F00	/* Mailbox Pointer */
-#define	TRM			0x4000	/* Transmit Mode */
-#define	REC			0x8000	/* Receive Mode */
-
-/* CAN_CLOCK Masks		 */
-#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler */
-
-/* CAN_TIMING Masks				 */
-#define	TSEG1		0x000F	/* Time	Segment	1 */
-#define	TSEG2		0x0070	/* Time	Segment	2 */
-#define	SAM			0x0080	/* Sampling */
-#define	SJW			0x0300	/* Synchronization Jump	Width */
-
-/* CAN_DEBUG Masks				 */
-#define	DEC			0x0001	/* Disable CAN Error Counters */
-#define	DRI			0x0002	/* Disable CAN RX Input */
-#define	DTO			0x0004	/* Disable CAN TX Output */
-#define	DIL			0x0008	/* Disable CAN Internal	Loop */
-#define	MAA			0x0010	/* Mode	Auto-Acknowledge Enable */
-#define	MRB			0x0020	/* Mode	Read Back Enable */
-#define	CDE			0x8000	/* CAN Debug Enable */
-
-/* CAN_CEC Masks			 */
-#define	RXECNT		0x00FF	/* Receive Error Counter */
-#define	TXECNT		0xFF00	/* Transmit Error Counter */
-
-/* CAN_INTR Masks				 */
-#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt */
-#define	MBRIF		MBRIRQ	/* legacy */
-#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt */
-#define	MBTIF		MBTIRQ	/* legacy */
-#define	GIRQ		0x0004	/* Global Interrupt */
-#define	SMACK		0x0008	/* Sleep Mode Acknowledge */
-#define	CANTX		0x0040	/* CAN TX Bus Value */
-#define	CANRX		0x0080	/* CAN RX Bus Value */
-
-/* CAN_MBxx_ID1	and CAN_MBxx_ID0 Masks			 */
-#define	DFC			0xFFFF	/* Data	Filtering Code (If Enabled) (ID0) */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier	(ID0) */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits	of Extended Identifier (ID1) */
-#define	BASEID		0x1FFC	/* Base	Identifier	 */
-#define	IDE			0x2000	/* Identifier Extension */
-#define	RTR			0x4000	/* Remote Frame	Transmission Request */
-#define	AME			0x8000	/* Acceptance Mask Enable */
-
-/* CAN_MBxx_TIMESTAMP Masks */
-#define	TSV			0xFFFF	/* Timestamp */
-
-/* CAN_MBxx_LENGTH Masks */
-#define	DLC			0x000F	/* Data	Length Code */
-
-/* CAN_AMxxH and CAN_AMxxL Masks					 */
-#define	DFM			0xFFFF	/* Data	Field Mask (If Enabled)	(CAN_AMxxL) */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier	(CAN_AMxxL) */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits	of Extended Identifier (CAN_AMxxH) */
-#define	BASEID		0x1FFC	/* Base	Identifier		 */
-#define	AMIDE		0x2000	/* Acceptance Mask ID Extension	Enable */
-#define	FMD			0x4000	/* Full	Mask Data Field	Enable */
-#define	FDF			0x8000	/* Filter On Data Field	Enable */
-
-/* CAN_MC1 Masks		 */
-#define	MC0			0x0001	/* Enable Mailbox 0 */
-#define	MC1			0x0002	/* Enable Mailbox 1 */
-#define	MC2			0x0004	/* Enable Mailbox 2 */
-#define	MC3			0x0008	/* Enable Mailbox 3 */
-#define	MC4			0x0010	/* Enable Mailbox 4 */
-#define	MC5			0x0020	/* Enable Mailbox 5 */
-#define	MC6			0x0040	/* Enable Mailbox 6 */
-#define	MC7			0x0080	/* Enable Mailbox 7 */
-#define	MC8			0x0100	/* Enable Mailbox 8 */
-#define	MC9			0x0200	/* Enable Mailbox 9 */
-#define	MC10		0x0400	/* Enable Mailbox 10 */
-#define	MC11		0x0800	/* Enable Mailbox 11 */
-#define	MC12		0x1000	/* Enable Mailbox 12 */
-#define	MC13		0x2000	/* Enable Mailbox 13 */
-#define	MC14		0x4000	/* Enable Mailbox 14 */
-#define	MC15		0x8000	/* Enable Mailbox 15 */
-
-/* CAN_MC2 Masks		 */
-#define	MC16		0x0001	/* Enable Mailbox 16 */
-#define	MC17		0x0002	/* Enable Mailbox 17 */
-#define	MC18		0x0004	/* Enable Mailbox 18 */
-#define	MC19		0x0008	/* Enable Mailbox 19 */
-#define	MC20		0x0010	/* Enable Mailbox 20 */
-#define	MC21		0x0020	/* Enable Mailbox 21 */
-#define	MC22		0x0040	/* Enable Mailbox 22 */
-#define	MC23		0x0080	/* Enable Mailbox 23 */
-#define	MC24		0x0100	/* Enable Mailbox 24 */
-#define	MC25		0x0200	/* Enable Mailbox 25 */
-#define	MC26		0x0400	/* Enable Mailbox 26 */
-#define	MC27		0x0800	/* Enable Mailbox 27 */
-#define	MC28		0x1000	/* Enable Mailbox 28 */
-#define	MC29		0x2000	/* Enable Mailbox 29 */
-#define	MC30		0x4000	/* Enable Mailbox 30 */
-#define	MC31		0x8000	/* Enable Mailbox 31 */
-
-/* CAN_MD1 Masks					 */
-#define	MD0			0x0001	/* Enable Mailbox 0 For	Receive */
-#define	MD1			0x0002	/* Enable Mailbox 1 For	Receive */
-#define	MD2			0x0004	/* Enable Mailbox 2 For	Receive */
-#define	MD3			0x0008	/* Enable Mailbox 3 For	Receive */
-#define	MD4			0x0010	/* Enable Mailbox 4 For	Receive */
-#define	MD5			0x0020	/* Enable Mailbox 5 For	Receive */
-#define	MD6			0x0040	/* Enable Mailbox 6 For	Receive */
-#define	MD7			0x0080	/* Enable Mailbox 7 For	Receive */
-#define	MD8			0x0100	/* Enable Mailbox 8 For	Receive */
-#define	MD9			0x0200	/* Enable Mailbox 9 For	Receive */
-#define	MD10		0x0400	/* Enable Mailbox 10 For Receive */
-#define	MD11		0x0800	/* Enable Mailbox 11 For Receive */
-#define	MD12		0x1000	/* Enable Mailbox 12 For Receive */
-#define	MD13		0x2000	/* Enable Mailbox 13 For Receive */
-#define	MD14		0x4000	/* Enable Mailbox 14 For Receive */
-#define	MD15		0x8000	/* Enable Mailbox 15 For Receive */
-
-/* CAN_MD2 Masks					 */
-#define	MD16		0x0001	/* Enable Mailbox 16 For Receive */
-#define	MD17		0x0002	/* Enable Mailbox 17 For Receive */
-#define	MD18		0x0004	/* Enable Mailbox 18 For Receive */
-#define	MD19		0x0008	/* Enable Mailbox 19 For Receive */
-#define	MD20		0x0010	/* Enable Mailbox 20 For Receive */
-#define	MD21		0x0020	/* Enable Mailbox 21 For Receive */
-#define	MD22		0x0040	/* Enable Mailbox 22 For Receive */
-#define	MD23		0x0080	/* Enable Mailbox 23 For Receive */
-#define	MD24		0x0100	/* Enable Mailbox 24 For Receive */
-#define	MD25		0x0200	/* Enable Mailbox 25 For Receive */
-#define	MD26		0x0400	/* Enable Mailbox 26 For Receive */
-#define	MD27		0x0800	/* Enable Mailbox 27 For Receive */
-#define	MD28		0x1000	/* Enable Mailbox 28 For Receive */
-#define	MD29		0x2000	/* Enable Mailbox 29 For Receive */
-#define	MD30		0x4000	/* Enable Mailbox 30 For Receive */
-#define	MD31		0x8000	/* Enable Mailbox 31 For Receive */
-
-/* CAN_RMP1 Masks					 */
-#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0 */
-#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1 */
-#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2 */
-#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3 */
-#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4 */
-#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5 */
-#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6 */
-#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7 */
-#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8 */
-#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9 */
-#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10 */
-#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11 */
-#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12 */
-#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13 */
-#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14 */
-#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15 */
-
-/* CAN_RMP2 Masks					 */
-#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16 */
-#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17 */
-#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18 */
-#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19 */
-#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20 */
-#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21 */
-#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22 */
-#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23 */
-#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24 */
-#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25 */
-#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26 */
-#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27 */
-#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28 */
-#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29 */
-#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30 */
-#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31 */
-
-/* CAN_RML1 Masks					 */
-#define	RML0		0x0001	/* RX Message Lost In Mailbox 0 */
-#define	RML1		0x0002	/* RX Message Lost In Mailbox 1 */
-#define	RML2		0x0004	/* RX Message Lost In Mailbox 2 */
-#define	RML3		0x0008	/* RX Message Lost In Mailbox 3 */
-#define	RML4		0x0010	/* RX Message Lost In Mailbox 4 */
-#define	RML5		0x0020	/* RX Message Lost In Mailbox 5 */
-#define	RML6		0x0040	/* RX Message Lost In Mailbox 6 */
-#define	RML7		0x0080	/* RX Message Lost In Mailbox 7 */
-#define	RML8		0x0100	/* RX Message Lost In Mailbox 8 */
-#define	RML9		0x0200	/* RX Message Lost In Mailbox 9 */
-#define	RML10		0x0400	/* RX Message Lost In Mailbox 10 */
-#define	RML11		0x0800	/* RX Message Lost In Mailbox 11 */
-#define	RML12		0x1000	/* RX Message Lost In Mailbox 12 */
-#define	RML13		0x2000	/* RX Message Lost In Mailbox 13 */
-#define	RML14		0x4000	/* RX Message Lost In Mailbox 14 */
-#define	RML15		0x8000	/* RX Message Lost In Mailbox 15 */
-
-/* CAN_RML2 Masks					 */
-#define	RML16		0x0001	/* RX Message Lost In Mailbox 16 */
-#define	RML17		0x0002	/* RX Message Lost In Mailbox 17 */
-#define	RML18		0x0004	/* RX Message Lost In Mailbox 18 */
-#define	RML19		0x0008	/* RX Message Lost In Mailbox 19 */
-#define	RML20		0x0010	/* RX Message Lost In Mailbox 20 */
-#define	RML21		0x0020	/* RX Message Lost In Mailbox 21 */
-#define	RML22		0x0040	/* RX Message Lost In Mailbox 22 */
-#define	RML23		0x0080	/* RX Message Lost In Mailbox 23 */
-#define	RML24		0x0100	/* RX Message Lost In Mailbox 24 */
-#define	RML25		0x0200	/* RX Message Lost In Mailbox 25 */
-#define	RML26		0x0400	/* RX Message Lost In Mailbox 26 */
-#define	RML27		0x0800	/* RX Message Lost In Mailbox 27 */
-#define	RML28		0x1000	/* RX Message Lost In Mailbox 28 */
-#define	RML29		0x2000	/* RX Message Lost In Mailbox 29 */
-#define	RML30		0x4000	/* RX Message Lost In Mailbox 30 */
-#define	RML31		0x8000	/* RX Message Lost In Mailbox 31 */
-
-/* CAN_OPSS1 Masks													 */
-#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	0 */
-#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	1 */
-#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	2 */
-#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	3 */
-#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	4 */
-#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	5 */
-#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	6 */
-#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	7 */
-#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	8 */
-#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	9 */
-#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	10 */
-#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	11 */
-#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	12 */
-#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	13 */
-#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	14 */
-#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	15 */
-
-/* CAN_OPSS2 Masks													 */
-#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	16 */
-#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	17 */
-#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	18 */
-#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	19 */
-#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	20 */
-#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	21 */
-#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	22 */
-#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	23 */
-#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	24 */
-#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	25 */
-#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	26 */
-#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	27 */
-#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	28 */
-#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	29 */
-#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	30 */
-#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	31 */
-
-/* CAN_TRR1 Masks							 */
-#define	TRR0		0x0001	/* Deny	But Don't Lock Access To Mailbox 0 */
-#define	TRR1		0x0002	/* Deny	But Don't Lock Access To Mailbox 1 */
-#define	TRR2		0x0004	/* Deny	But Don't Lock Access To Mailbox 2 */
-#define	TRR3		0x0008	/* Deny	But Don't Lock Access To Mailbox 3 */
-#define	TRR4		0x0010	/* Deny	But Don't Lock Access To Mailbox 4 */
-#define	TRR5		0x0020	/* Deny	But Don't Lock Access To Mailbox 5 */
-#define	TRR6		0x0040	/* Deny	But Don't Lock Access To Mailbox 6 */
-#define	TRR7		0x0080	/* Deny	But Don't Lock Access To Mailbox 7 */
-#define	TRR8		0x0100	/* Deny	But Don't Lock Access To Mailbox 8 */
-#define	TRR9		0x0200	/* Deny	But Don't Lock Access To Mailbox 9 */
-#define	TRR10		0x0400	/* Deny	But Don't Lock Access To Mailbox 10 */
-#define	TRR11		0x0800	/* Deny	But Don't Lock Access To Mailbox 11 */
-#define	TRR12		0x1000	/* Deny	But Don't Lock Access To Mailbox 12 */
-#define	TRR13		0x2000	/* Deny	But Don't Lock Access To Mailbox 13 */
-#define	TRR14		0x4000	/* Deny	But Don't Lock Access To Mailbox 14 */
-#define	TRR15		0x8000	/* Deny	But Don't Lock Access To Mailbox 15 */
-
-/* CAN_TRR2 Masks							 */
-#define	TRR16		0x0001	/* Deny	But Don't Lock Access To Mailbox 16 */
-#define	TRR17		0x0002	/* Deny	But Don't Lock Access To Mailbox 17 */
-#define	TRR18		0x0004	/* Deny	But Don't Lock Access To Mailbox 18 */
-#define	TRR19		0x0008	/* Deny	But Don't Lock Access To Mailbox 19 */
-#define	TRR20		0x0010	/* Deny	But Don't Lock Access To Mailbox 20 */
-#define	TRR21		0x0020	/* Deny	But Don't Lock Access To Mailbox 21 */
-#define	TRR22		0x0040	/* Deny	But Don't Lock Access To Mailbox 22 */
-#define	TRR23		0x0080	/* Deny	But Don't Lock Access To Mailbox 23 */
-#define	TRR24		0x0100	/* Deny	But Don't Lock Access To Mailbox 24 */
-#define	TRR25		0x0200	/* Deny	But Don't Lock Access To Mailbox 25 */
-#define	TRR26		0x0400	/* Deny	But Don't Lock Access To Mailbox 26 */
-#define	TRR27		0x0800	/* Deny	But Don't Lock Access To Mailbox 27 */
-#define	TRR28		0x1000	/* Deny	But Don't Lock Access To Mailbox 28 */
-#define	TRR29		0x2000	/* Deny	But Don't Lock Access To Mailbox 29 */
-#define	TRR30		0x4000	/* Deny	But Don't Lock Access To Mailbox 30 */
-#define	TRR31		0x8000	/* Deny	But Don't Lock Access To Mailbox 31 */
-
-/* CAN_TRS1 Masks						 */
-#define	TRS0		0x0001	/* Remote Frame	Request	For Mailbox 0 */
-#define	TRS1		0x0002	/* Remote Frame	Request	For Mailbox 1 */
-#define	TRS2		0x0004	/* Remote Frame	Request	For Mailbox 2 */
-#define	TRS3		0x0008	/* Remote Frame	Request	For Mailbox 3 */
-#define	TRS4		0x0010	/* Remote Frame	Request	For Mailbox 4 */
-#define	TRS5		0x0020	/* Remote Frame	Request	For Mailbox 5 */
-#define	TRS6		0x0040	/* Remote Frame	Request	For Mailbox 6 */
-#define	TRS7		0x0080	/* Remote Frame	Request	For Mailbox 7 */
-#define	TRS8		0x0100	/* Remote Frame	Request	For Mailbox 8 */
-#define	TRS9		0x0200	/* Remote Frame	Request	For Mailbox 9 */
-#define	TRS10		0x0400	/* Remote Frame	Request	For Mailbox 10 */
-#define	TRS11		0x0800	/* Remote Frame	Request	For Mailbox 11 */
-#define	TRS12		0x1000	/* Remote Frame	Request	For Mailbox 12 */
-#define	TRS13		0x2000	/* Remote Frame	Request	For Mailbox 13 */
-#define	TRS14		0x4000	/* Remote Frame	Request	For Mailbox 14 */
-#define	TRS15		0x8000	/* Remote Frame	Request	For Mailbox 15 */
-
-/* CAN_TRS2 Masks						 */
-#define	TRS16		0x0001	/* Remote Frame	Request	For Mailbox 16 */
-#define	TRS17		0x0002	/* Remote Frame	Request	For Mailbox 17 */
-#define	TRS18		0x0004	/* Remote Frame	Request	For Mailbox 18 */
-#define	TRS19		0x0008	/* Remote Frame	Request	For Mailbox 19 */
-#define	TRS20		0x0010	/* Remote Frame	Request	For Mailbox 20 */
-#define	TRS21		0x0020	/* Remote Frame	Request	For Mailbox 21 */
-#define	TRS22		0x0040	/* Remote Frame	Request	For Mailbox 22 */
-#define	TRS23		0x0080	/* Remote Frame	Request	For Mailbox 23 */
-#define	TRS24		0x0100	/* Remote Frame	Request	For Mailbox 24 */
-#define	TRS25		0x0200	/* Remote Frame	Request	For Mailbox 25 */
-#define	TRS26		0x0400	/* Remote Frame	Request	For Mailbox 26 */
-#define	TRS27		0x0800	/* Remote Frame	Request	For Mailbox 27 */
-#define	TRS28		0x1000	/* Remote Frame	Request	For Mailbox 28 */
-#define	TRS29		0x2000	/* Remote Frame	Request	For Mailbox 29 */
-#define	TRS30		0x4000	/* Remote Frame	Request	For Mailbox 30 */
-#define	TRS31		0x8000	/* Remote Frame	Request	For Mailbox 31 */
-
-/* CAN_AA1 Masks					 */
-#define	AA0			0x0001	/* Aborted Message In Mailbox 0 */
-#define	AA1			0x0002	/* Aborted Message In Mailbox 1 */
-#define	AA2			0x0004	/* Aborted Message In Mailbox 2 */
-#define	AA3			0x0008	/* Aborted Message In Mailbox 3 */
-#define	AA4			0x0010	/* Aborted Message In Mailbox 4 */
-#define	AA5			0x0020	/* Aborted Message In Mailbox 5 */
-#define	AA6			0x0040	/* Aborted Message In Mailbox 6 */
-#define	AA7			0x0080	/* Aborted Message In Mailbox 7 */
-#define	AA8			0x0100	/* Aborted Message In Mailbox 8 */
-#define	AA9			0x0200	/* Aborted Message In Mailbox 9 */
-#define	AA10		0x0400	/* Aborted Message In Mailbox 10 */
-#define	AA11		0x0800	/* Aborted Message In Mailbox 11 */
-#define	AA12		0x1000	/* Aborted Message In Mailbox 12 */
-#define	AA13		0x2000	/* Aborted Message In Mailbox 13 */
-#define	AA14		0x4000	/* Aborted Message In Mailbox 14 */
-#define	AA15		0x8000	/* Aborted Message In Mailbox 15 */
-
-/* CAN_AA2 Masks					 */
-#define	AA16		0x0001	/* Aborted Message In Mailbox 16 */
-#define	AA17		0x0002	/* Aborted Message In Mailbox 17 */
-#define	AA18		0x0004	/* Aborted Message In Mailbox 18 */
-#define	AA19		0x0008	/* Aborted Message In Mailbox 19 */
-#define	AA20		0x0010	/* Aborted Message In Mailbox 20 */
-#define	AA21		0x0020	/* Aborted Message In Mailbox 21 */
-#define	AA22		0x0040	/* Aborted Message In Mailbox 22 */
-#define	AA23		0x0080	/* Aborted Message In Mailbox 23 */
-#define	AA24		0x0100	/* Aborted Message In Mailbox 24 */
-#define	AA25		0x0200	/* Aborted Message In Mailbox 25 */
-#define	AA26		0x0400	/* Aborted Message In Mailbox 26 */
-#define	AA27		0x0800	/* Aborted Message In Mailbox 27 */
-#define	AA28		0x1000	/* Aborted Message In Mailbox 28 */
-#define	AA29		0x2000	/* Aborted Message In Mailbox 29 */
-#define	AA30		0x4000	/* Aborted Message In Mailbox 30 */
-#define	AA31		0x8000	/* Aborted Message In Mailbox 31 */
-
-/* CAN_TA1 Masks						 */
-#define	TA0			0x0001	/* Transmit Successful From Mailbox 0 */
-#define	TA1			0x0002	/* Transmit Successful From Mailbox 1 */
-#define	TA2			0x0004	/* Transmit Successful From Mailbox 2 */
-#define	TA3			0x0008	/* Transmit Successful From Mailbox 3 */
-#define	TA4			0x0010	/* Transmit Successful From Mailbox 4 */
-#define	TA5			0x0020	/* Transmit Successful From Mailbox 5 */
-#define	TA6			0x0040	/* Transmit Successful From Mailbox 6 */
-#define	TA7			0x0080	/* Transmit Successful From Mailbox 7 */
-#define	TA8			0x0100	/* Transmit Successful From Mailbox 8 */
-#define	TA9			0x0200	/* Transmit Successful From Mailbox 9 */
-#define	TA10		0x0400	/* Transmit Successful From Mailbox 10 */
-#define	TA11		0x0800	/* Transmit Successful From Mailbox 11 */
-#define	TA12		0x1000	/* Transmit Successful From Mailbox 12 */
-#define	TA13		0x2000	/* Transmit Successful From Mailbox 13 */
-#define	TA14		0x4000	/* Transmit Successful From Mailbox 14 */
-#define	TA15		0x8000	/* Transmit Successful From Mailbox 15 */
-
-/* CAN_TA2 Masks						 */
-#define	TA16		0x0001	/* Transmit Successful From Mailbox 16 */
-#define	TA17		0x0002	/* Transmit Successful From Mailbox 17 */
-#define	TA18		0x0004	/* Transmit Successful From Mailbox 18 */
-#define	TA19		0x0008	/* Transmit Successful From Mailbox 19 */
-#define	TA20		0x0010	/* Transmit Successful From Mailbox 20 */
-#define	TA21		0x0020	/* Transmit Successful From Mailbox 21 */
-#define	TA22		0x0040	/* Transmit Successful From Mailbox 22 */
-#define	TA23		0x0080	/* Transmit Successful From Mailbox 23 */
-#define	TA24		0x0100	/* Transmit Successful From Mailbox 24 */
-#define	TA25		0x0200	/* Transmit Successful From Mailbox 25 */
-#define	TA26		0x0400	/* Transmit Successful From Mailbox 26 */
-#define	TA27		0x0800	/* Transmit Successful From Mailbox 27 */
-#define	TA28		0x1000	/* Transmit Successful From Mailbox 28 */
-#define	TA29		0x2000	/* Transmit Successful From Mailbox 29 */
-#define	TA30		0x4000	/* Transmit Successful From Mailbox 30 */
-#define	TA31		0x8000	/* Transmit Successful From Mailbox 31 */
-
-/* CAN_MBTD Masks					 */
-#define	TDPTR		0x001F	/* Mailbox To Temporarily Disable */
-#define	TDA			0x0040	/* Temporary Disable Acknowledge */
-#define	TDR			0x0080	/* Temporary Disable Request */
-
-/* CAN_RFH1 Masks											 */
-#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0 */
-#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1 */
-#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2 */
-#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3 */
-#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4 */
-#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5 */
-#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6 */
-#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7 */
-#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8 */
-#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9 */
-#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10 */
-#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11 */
-#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12 */
-#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13 */
-#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14 */
-#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15 */
-
-/* CAN_RFH2 Masks											 */
-#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16 */
-#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17 */
-#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18 */
-#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19 */
-#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20 */
-#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21 */
-#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22 */
-#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23 */
-#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24 */
-#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25 */
-#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26 */
-#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27 */
-#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28 */
-#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29 */
-#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30 */
-#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31 */
-
-/* CAN_MBTIF1 Masks						 */
-#define	MBTIF0		0x0001	/* TX Interrupt	Active In Mailbox 0 */
-#define	MBTIF1		0x0002	/* TX Interrupt	Active In Mailbox 1 */
-#define	MBTIF2		0x0004	/* TX Interrupt	Active In Mailbox 2 */
-#define	MBTIF3		0x0008	/* TX Interrupt	Active In Mailbox 3 */
-#define	MBTIF4		0x0010	/* TX Interrupt	Active In Mailbox 4 */
-#define	MBTIF5		0x0020	/* TX Interrupt	Active In Mailbox 5 */
-#define	MBTIF6		0x0040	/* TX Interrupt	Active In Mailbox 6 */
-#define	MBTIF7		0x0080	/* TX Interrupt	Active In Mailbox 7 */
-#define	MBTIF8		0x0100	/* TX Interrupt	Active In Mailbox 8 */
-#define	MBTIF9		0x0200	/* TX Interrupt	Active In Mailbox 9 */
-#define	MBTIF10		0x0400	/* TX Interrupt	Active In Mailbox 10 */
-#define	MBTIF11		0x0800	/* TX Interrupt	Active In Mailbox 11 */
-#define	MBTIF12		0x1000	/* TX Interrupt	Active In Mailbox 12 */
-#define	MBTIF13		0x2000	/* TX Interrupt	Active In Mailbox 13 */
-#define	MBTIF14		0x4000	/* TX Interrupt	Active In Mailbox 14 */
-#define	MBTIF15		0x8000	/* TX Interrupt	Active In Mailbox 15 */
-
-/* CAN_MBTIF2 Masks						 */
-#define	MBTIF16		0x0001	/* TX Interrupt	Active In Mailbox 16 */
-#define	MBTIF17		0x0002	/* TX Interrupt	Active In Mailbox 17 */
-#define	MBTIF18		0x0004	/* TX Interrupt	Active In Mailbox 18 */
-#define	MBTIF19		0x0008	/* TX Interrupt	Active In Mailbox 19 */
-#define	MBTIF20		0x0010	/* TX Interrupt	Active In Mailbox 20 */
-#define	MBTIF21		0x0020	/* TX Interrupt	Active In Mailbox 21 */
-#define	MBTIF22		0x0040	/* TX Interrupt	Active In Mailbox 22 */
-#define	MBTIF23		0x0080	/* TX Interrupt	Active In Mailbox 23 */
-#define	MBTIF24		0x0100	/* TX Interrupt	Active In Mailbox 24 */
-#define	MBTIF25		0x0200	/* TX Interrupt	Active In Mailbox 25 */
-#define	MBTIF26		0x0400	/* TX Interrupt	Active In Mailbox 26 */
-#define	MBTIF27		0x0800	/* TX Interrupt	Active In Mailbox 27 */
-#define	MBTIF28		0x1000	/* TX Interrupt	Active In Mailbox 28 */
-#define	MBTIF29		0x2000	/* TX Interrupt	Active In Mailbox 29 */
-#define	MBTIF30		0x4000	/* TX Interrupt	Active In Mailbox 30 */
-#define	MBTIF31		0x8000	/* TX Interrupt	Active In Mailbox 31 */
-
-/* CAN_MBRIF1 Masks						 */
-#define	MBRIF0		0x0001	/* RX Interrupt	Active In Mailbox 0 */
-#define	MBRIF1		0x0002	/* RX Interrupt	Active In Mailbox 1 */
-#define	MBRIF2		0x0004	/* RX Interrupt	Active In Mailbox 2 */
-#define	MBRIF3		0x0008	/* RX Interrupt	Active In Mailbox 3 */
-#define	MBRIF4		0x0010	/* RX Interrupt	Active In Mailbox 4 */
-#define	MBRIF5		0x0020	/* RX Interrupt	Active In Mailbox 5 */
-#define	MBRIF6		0x0040	/* RX Interrupt	Active In Mailbox 6 */
-#define	MBRIF7		0x0080	/* RX Interrupt	Active In Mailbox 7 */
-#define	MBRIF8		0x0100	/* RX Interrupt	Active In Mailbox 8 */
-#define	MBRIF9		0x0200	/* RX Interrupt	Active In Mailbox 9 */
-#define	MBRIF10		0x0400	/* RX Interrupt	Active In Mailbox 10 */
-#define	MBRIF11		0x0800	/* RX Interrupt	Active In Mailbox 11 */
-#define	MBRIF12		0x1000	/* RX Interrupt	Active In Mailbox 12 */
-#define	MBRIF13		0x2000	/* RX Interrupt	Active In Mailbox 13 */
-#define	MBRIF14		0x4000	/* RX Interrupt	Active In Mailbox 14 */
-#define	MBRIF15		0x8000	/* RX Interrupt	Active In Mailbox 15 */
-
-/* CAN_MBRIF2 Masks						 */
-#define	MBRIF16		0x0001	/* RX Interrupt	Active In Mailbox 16 */
-#define	MBRIF17		0x0002	/* RX Interrupt	Active In Mailbox 17 */
-#define	MBRIF18		0x0004	/* RX Interrupt	Active In Mailbox 18 */
-#define	MBRIF19		0x0008	/* RX Interrupt	Active In Mailbox 19 */
-#define	MBRIF20		0x0010	/* RX Interrupt	Active In Mailbox 20 */
-#define	MBRIF21		0x0020	/* RX Interrupt	Active In Mailbox 21 */
-#define	MBRIF22		0x0040	/* RX Interrupt	Active In Mailbox 22 */
-#define	MBRIF23		0x0080	/* RX Interrupt	Active In Mailbox 23 */
-#define	MBRIF24		0x0100	/* RX Interrupt	Active In Mailbox 24 */
-#define	MBRIF25		0x0200	/* RX Interrupt	Active In Mailbox 25 */
-#define	MBRIF26		0x0400	/* RX Interrupt	Active In Mailbox 26 */
-#define	MBRIF27		0x0800	/* RX Interrupt	Active In Mailbox 27 */
-#define	MBRIF28		0x1000	/* RX Interrupt	Active In Mailbox 28 */
-#define	MBRIF29		0x2000	/* RX Interrupt	Active In Mailbox 29 */
-#define	MBRIF30		0x4000	/* RX Interrupt	Active In Mailbox 30 */
-#define	MBRIF31		0x8000	/* RX Interrupt	Active In Mailbox 31 */
-
-/* CAN_MBIM1 Masks					 */
-#define	MBIM0		0x0001	/* Enable Interrupt For	Mailbox	0 */
-#define	MBIM1		0x0002	/* Enable Interrupt For	Mailbox	1 */
-#define	MBIM2		0x0004	/* Enable Interrupt For	Mailbox	2 */
-#define	MBIM3		0x0008	/* Enable Interrupt For	Mailbox	3 */
-#define	MBIM4		0x0010	/* Enable Interrupt For	Mailbox	4 */
-#define	MBIM5		0x0020	/* Enable Interrupt For	Mailbox	5 */
-#define	MBIM6		0x0040	/* Enable Interrupt For	Mailbox	6 */
-#define	MBIM7		0x0080	/* Enable Interrupt For	Mailbox	7 */
-#define	MBIM8		0x0100	/* Enable Interrupt For	Mailbox	8 */
-#define	MBIM9		0x0200	/* Enable Interrupt For	Mailbox	9 */
-#define	MBIM10		0x0400	/* Enable Interrupt For	Mailbox	10 */
-#define	MBIM11		0x0800	/* Enable Interrupt For	Mailbox	11 */
-#define	MBIM12		0x1000	/* Enable Interrupt For	Mailbox	12 */
-#define	MBIM13		0x2000	/* Enable Interrupt For	Mailbox	13 */
-#define	MBIM14		0x4000	/* Enable Interrupt For	Mailbox	14 */
-#define	MBIM15		0x8000	/* Enable Interrupt For	Mailbox	15 */
-
-/* CAN_MBIM2 Masks					 */
-#define	MBIM16		0x0001	/* Enable Interrupt For	Mailbox	16 */
-#define	MBIM17		0x0002	/* Enable Interrupt For	Mailbox	17 */
-#define	MBIM18		0x0004	/* Enable Interrupt For	Mailbox	18 */
-#define	MBIM19		0x0008	/* Enable Interrupt For	Mailbox	19 */
-#define	MBIM20		0x0010	/* Enable Interrupt For	Mailbox	20 */
-#define	MBIM21		0x0020	/* Enable Interrupt For	Mailbox	21 */
-#define	MBIM22		0x0040	/* Enable Interrupt For	Mailbox	22 */
-#define	MBIM23		0x0080	/* Enable Interrupt For	Mailbox	23 */
-#define	MBIM24		0x0100	/* Enable Interrupt For	Mailbox	24 */
-#define	MBIM25		0x0200	/* Enable Interrupt For	Mailbox	25 */
-#define	MBIM26		0x0400	/* Enable Interrupt For	Mailbox	26 */
-#define	MBIM27		0x0800	/* Enable Interrupt For	Mailbox	27 */
-#define	MBIM28		0x1000	/* Enable Interrupt For	Mailbox	28 */
-#define	MBIM29		0x2000	/* Enable Interrupt For	Mailbox	29 */
-#define	MBIM30		0x4000	/* Enable Interrupt For	Mailbox	30 */
-#define	MBIM31		0x8000	/* Enable Interrupt For	Mailbox	31 */
-
-/* CAN_GIM Masks									 */
-#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt */
-#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt */
-#define	EPIM		0x0004	/* Enable Error-Passive	Mode Interrupt */
-#define	BOIM		0x0008	/* Enable Bus Off Interrupt */
-#define	WUIM		0x0010	/* Enable Wake-Up Interrupt */
-#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt */
-#define	AAIM		0x0040	/* Enable Abort	Acknowledge Interrupt */
-#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt */
-#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt */
-#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt */
-#define	ADIM		0x0400	/* Enable Access Denied	Interrupt */
-
-/* CAN_GIS Masks								 */
-#define	EWTIS		0x0001	/* TX Error Count IRQ Status */
-#define	EWRIS		0x0002	/* RX Error Count IRQ Status */
-#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status */
-#define	BOIS		0x0008	/* Bus Off IRQ Status */
-#define	WUIS		0x0010	/* Wake-Up IRQ Status */
-#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status */
-#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status */
-#define	RMLIS		0x0080	/* RX Message Lost IRQ Status */
-#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status */
-#define	EXTIS		0x0200	/* External Trigger Output IRQ Status */
-#define	ADIS		0x0400	/* Access Denied IRQ Status */
-
-/* CAN_GIF Masks								 */
-#define	EWTIF		0x0001	/* TX Error Count IRQ Flag */
-#define	EWRIF		0x0002	/* RX Error Count IRQ Flag */
-#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag */
-#define	BOIF		0x0008	/* Bus Off IRQ Flag	 */
-#define	WUIF		0x0010	/* Wake-Up IRQ Flag	 */
-#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag */
-#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag */
-#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag */
-#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag */
-#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag */
-#define	ADIF		0x0400	/* Access Denied IRQ Flag */
-
-/* CAN_UCCNF Masks								 */
-#define	UCCNF		0x000F	/* Universal Counter Mode */
-#define	UC_STAMP	0x0001	/*		Timestamp Mode */
-#define	UC_WDOG		0x0002	/*		Watchdog Mode */
-#define	UC_AUTOTX	0x0003	/*		Auto-Transmit Mode */
-#define	UC_ERROR	0x0006	/*		CAN Error Frame	Count */
-#define	UC_OVER		0x0007	/*		CAN Overload Frame Count */
-#define	UC_LOST		0x0008	/*		Arbitration Lost During	TX Count */
-#define	UC_AA		0x0009	/*		TX Abort Count */
-#define	UC_TA		0x000A	/*		TX Successful Count */
-#define	UC_REJECT	0x000B	/*		RX Message Rejected Count */
-#define	UC_RML		0x000C	/*		RX Message Lost	Count */
-#define	UC_RX		0x000D	/*		Total Successful RX Messages Count */
-#define	UC_RMP		0x000E	/*		Successful RX W/Matching ID Count */
-#define	UC_ALL		0x000F	/*		Correct	Message	On CAN Bus Line	Count */
-#define	UCRC		0x0020	/* Universal Counter Reload/Clear */
-#define	UCCT		0x0040	/* Universal Counter CAN Trigger */
-#define	UCE			0x0080	/* Universal Counter Enable */
-
-/* CAN_ESR Masks			 */
-#define	ACKE		0x0004	/* Acknowledge Error */
-#define	SER			0x0008	/* Stuff Error */
-#define	CRCE		0x0010	/* CRC Error */
-#define	SA0			0x0020	/* Stuck At Dominant Error */
-#define	BEF			0x0040	/* Bit Error Flag */
-#define	FER			0x0080	/* Form	Error Flag */
-
-/* CAN_EWR Masks					 */
-#define	EWLREC		0x00FF	/* RX Error Count Limit	(For EWRIS) */
-#define	EWLTEC		0xFF00	/* TX Error Count Limit	(For EWTIS) */
-
 #endif /* _DEF_BF539_H */
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f60c333fec6..dbb6b1d83f6 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -498,6 +498,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PH6,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 06919db00a7..6fcfb9187c3 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -603,6 +603,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PE7,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index ab04d137fd8..0ed06c2366f 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -2104,677 +2104,6 @@
 
 #define                    ECCCNT  0x3ff      /* Transfer Count */
 
-/* Bit masks for CAN0_CONTROL */
-
-#define                       SRS  0x1        /* Software Reset */
-#define                       DNM  0x2        /* DeviceNet Mode */
-#define                       ABO  0x4        /* Auto Bus On */
-#define                       WBA  0x10       /* Wakeup On CAN Bus Activity */
-#define                       SMR  0x20       /* Sleep Mode Request */
-#define                       CSR  0x40       /* CAN Suspend Mode Request */
-#define                       CCR  0x80       /* CAN Configuration Mode Request */
-
-/* Bit masks for CAN0_STATUS */
-
-#define                        WT  0x1        /* CAN Transmit Warning Flag */
-#define                        WR  0x2        /* CAN Receive Warning Flag */
-#define                        EP  0x4        /* CAN Error Passive Mode */
-#define                       EBO  0x8        /* CAN Error Bus Off Mode */
-#define                       CSA  0x40       /* CAN Suspend Mode Acknowledge */
-#define                       CCA  0x80       /* CAN Configuration Mode Acknowledge */
-#define                     MBPTR  0x1f00     /* Mailbox Pointer */
-#define                       TRM  0x4000     /* Transmit Mode Status */
-#define                       REC  0x8000     /* Receive Mode Status */
-
-/* Bit masks for CAN0_DEBUG */
-
-#define                       DEC  0x1        /* Disable Transmit/Receive Error Counters */
-#define                       DRI  0x2        /* Disable CANRX Input Pin */
-#define                       DTO  0x4        /* Disable CANTX Output Pin */
-#define                       DIL  0x8        /* Disable Internal Loop */
-#define                       MAA  0x10       /* Mode Auto-Acknowledge */
-#define                       MRB  0x20       /* Mode Read Back */
-#define                       CDE  0x8000     /* CAN Debug Mode Enable */
-
-/* Bit masks for CAN0_CLOCK */
-
-#define                       BRP  0x3ff      /* CAN Bit Rate Prescaler */
-
-/* Bit masks for CAN0_TIMING */
-
-#define                       SJW  0x300      /* Synchronization Jump Width */
-#define                       SAM  0x80       /* Sampling */
-#define                     TSEG2  0x70       /* Time Segment 2 */
-#define                     TSEG1  0xf        /* Time Segment 1 */
-
-/* Bit masks for CAN0_INTR */
-
-#define                     CANRX  0x80       /* Serial Input From Transceiver */
-#define                     CANTX  0x40       /* Serial Output To Transceiver */
-#define                     SMACK  0x8        /* Sleep Mode Acknowledge */
-#define                      GIRQ  0x4        /* Global Interrupt Request Status */
-#define                    MBTIRQ  0x2        /* Mailbox Transmit Interrupt Request */
-#define                    MBRIRQ  0x1        /* Mailbox Receive Interrupt Request */
-
-/* Bit masks for CAN0_GIM */
-
-#define                     EWTIM  0x1        /* Error Warning Transmit Interrupt Mask */
-#define                     EWRIM  0x2        /* Error Warning Receive Interrupt Mask */
-#define                      EPIM  0x4        /* Error Passive Interrupt Mask */
-#define                      BOIM  0x8        /* Bus Off Interrupt Mask */
-#define                      WUIM  0x10       /* Wakeup Interrupt Mask */
-#define                     UIAIM  0x20       /* Unimplemented Address Interrupt Mask */
-#define                      AAIM  0x40       /* Abort Acknowledge Interrupt Mask */
-#define                     RMLIM  0x80       /* Receive Message Lost Interrupt Mask */
-#define                     UCEIM  0x100      /* Universal Counter Exceeded Interrupt Mask */
-#define                      ADIM  0x400      /* Access Denied Interrupt Mask */
-
-/* Bit masks for CAN0_GIS */
-
-#define                     EWTIS  0x1        /* Error Warning Transmit Interrupt Status */
-#define                     EWRIS  0x2        /* Error Warning Receive Interrupt Status */
-#define                      EPIS  0x4        /* Error Passive Interrupt Status */
-#define                      BOIS  0x8        /* Bus Off Interrupt Status */
-#define                      WUIS  0x10       /* Wakeup Interrupt Status */
-#define                     UIAIS  0x20       /* Unimplemented Address Interrupt Status */
-#define                      AAIS  0x40       /* Abort Acknowledge Interrupt Status */
-#define                     RMLIS  0x80       /* Receive Message Lost Interrupt Status */
-#define                     UCEIS  0x100      /* Universal Counter Exceeded Interrupt Status */
-#define                      ADIS  0x400      /* Access Denied Interrupt Status */
-
-/* Bit masks for CAN0_GIF */
-
-#define                     EWTIF  0x1        /* Error Warning Transmit Interrupt Flag */
-#define                     EWRIF  0x2        /* Error Warning Receive Interrupt Flag */
-#define                      EPIF  0x4        /* Error Passive Interrupt Flag */
-#define                      BOIF  0x8        /* Bus Off Interrupt Flag */
-#define                      WUIF  0x10       /* Wakeup Interrupt Flag */
-#define                     UIAIF  0x20       /* Unimplemented Address Interrupt Flag */
-#define                      AAIF  0x40       /* Abort Acknowledge Interrupt Flag */
-#define                     RMLIF  0x80       /* Receive Message Lost Interrupt Flag */
-#define                     UCEIF  0x100      /* Universal Counter Exceeded Interrupt Flag */
-#define                      ADIF  0x400      /* Access Denied Interrupt Flag */
-
-/* Bit masks for CAN0_MBTD */
-
-#define                       TDR  0x80       /* Temporary Disable Request */
-#define                       TDA  0x40       /* Temporary Disable Acknowledge */
-#define                     TDPTR  0x1f       /* Temporary Disable Pointer */
-
-/* Bit masks for CAN0_UCCNF */
-
-#define                     UCCNF  0xf        /* Universal Counter Configuration */
-#define                      UCRC  0x20       /* Universal Counter Reload/Clear */
-#define                      UCCT  0x40       /* Universal Counter CAN Trigger */
-#define                       UCE  0x80       /* Universal Counter Enable */
-
-/* Bit masks for CAN0_CEC */
-
-#define                    RXECNT  0xff       /* Receive Error Counter */
-#define                    TXECNT  0xff00     /* Transmit Error Counter */
-
-/* Bit masks for CAN0_ESR */
-
-#define                       FER  0x80       /* Form Error */
-#define                       BEF  0x40       /* Bit Error Flag */
-#define                       SA0  0x20       /* Stuck At Dominant */
-#define                      CRCE  0x10       /* CRC Error */
-#define                       SER  0x8        /* Stuff Bit Error */
-#define                      ACKE  0x4        /* Acknowledge Error */
-
-/* Bit masks for CAN0_EWR */
-
-#define                    EWLTEC  0xff00     /* Transmit Error Warning Limit */
-#define                    EWLREC  0xff       /* Receive Error Warning Limit */
-
-/* Bit masks for CAN0_AMxx_H */
-
-#define                       FDF  0x8000     /* Filter On Data Field */
-#define                       FMD  0x4000     /* Full Mask Data */
-#define                     AMIDE  0x2000     /* Acceptance Mask Identifier Extension */
-#define                    BASEID  0x1ffc     /* Base Identifier */
-#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
-
-/* Bit masks for CAN0_AMxx_L */
-
-#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
-#define                       DFM  0xffff     /* Data Field Mask */
-
-/* Bit masks for CAN0_MBxx_ID1 */
-
-#define                       AME  0x8000     /* Acceptance Mask Enable */
-#define                       RTR  0x4000     /* Remote Transmission Request */
-#define                       IDE  0x2000     /* Identifier Extension */
-#define                    BASEID  0x1ffc     /* Base Identifier */
-#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
-
-/* Bit masks for CAN0_MBxx_ID0 */
-
-#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
-#define                       DFM  0xffff     /* Data Field Mask */
-
-/* Bit masks for CAN0_MBxx_TIMESTAMP */
-
-#define                       TSV  0xffff     /* Time Stamp Value */
-
-/* Bit masks for CAN0_MBxx_LENGTH */
-
-#define                       DLC  0xf        /* Data Length Code */
-
-/* Bit masks for CAN0_MBxx_DATA3 */
-
-#define                 CAN_BYTE0  0xff00     /* Data Field Byte 0 */
-#define                 CAN_BYTE1  0xff       /* Data Field Byte 1 */
-
-/* Bit masks for CAN0_MBxx_DATA2 */
-
-#define                 CAN_BYTE2  0xff00     /* Data Field Byte 2 */
-#define                 CAN_BYTE3  0xff       /* Data Field Byte 3 */
-
-/* Bit masks for CAN0_MBxx_DATA1 */
-
-#define                 CAN_BYTE4  0xff00     /* Data Field Byte 4 */
-#define                 CAN_BYTE5  0xff       /* Data Field Byte 5 */
-
-/* Bit masks for CAN0_MBxx_DATA0 */
-
-#define                 CAN_BYTE6  0xff00     /* Data Field Byte 6 */
-#define                 CAN_BYTE7  0xff       /* Data Field Byte 7 */
-
-/* Bit masks for CAN0_MC1 */
-
-#define                       MC0  0x1        /* Mailbox 0 Enable */
-#define                       MC1  0x2        /* Mailbox 1 Enable */
-#define                       MC2  0x4        /* Mailbox 2 Enable */
-#define                       MC3  0x8        /* Mailbox 3 Enable */
-#define                       MC4  0x10       /* Mailbox 4 Enable */
-#define                       MC5  0x20       /* Mailbox 5 Enable */
-#define                       MC6  0x40       /* Mailbox 6 Enable */
-#define                       MC7  0x80       /* Mailbox 7 Enable */
-#define                       MC8  0x100      /* Mailbox 8 Enable */
-#define                       MC9  0x200      /* Mailbox 9 Enable */
-#define                      MC10  0x400      /* Mailbox 10 Enable */
-#define                      MC11  0x800      /* Mailbox 11 Enable */
-#define                      MC12  0x1000     /* Mailbox 12 Enable */
-#define                      MC13  0x2000     /* Mailbox 13 Enable */
-#define                      MC14  0x4000     /* Mailbox 14 Enable */
-#define                      MC15  0x8000     /* Mailbox 15 Enable */
-
-/* Bit masks for CAN0_MC2 */
-
-#define                      MC16  0x1        /* Mailbox 16 Enable */
-#define                      MC17  0x2        /* Mailbox 17 Enable */
-#define                      MC18  0x4        /* Mailbox 18 Enable */
-#define                      MC19  0x8        /* Mailbox 19 Enable */
-#define                      MC20  0x10       /* Mailbox 20 Enable */
-#define                      MC21  0x20       /* Mailbox 21 Enable */
-#define                      MC22  0x40       /* Mailbox 22 Enable */
-#define                      MC23  0x80       /* Mailbox 23 Enable */
-#define                      MC24  0x100      /* Mailbox 24 Enable */
-#define                      MC25  0x200      /* Mailbox 25 Enable */
-#define                      MC26  0x400      /* Mailbox 26 Enable */
-#define                      MC27  0x800      /* Mailbox 27 Enable */
-#define                      MC28  0x1000     /* Mailbox 28 Enable */
-#define                      MC29  0x2000     /* Mailbox 29 Enable */
-#define                      MC30  0x4000     /* Mailbox 30 Enable */
-#define                      MC31  0x8000     /* Mailbox 31 Enable */
-
-/* Bit masks for CAN0_MD1 */
-
-#define                       MD0  0x1        /* Mailbox 0 Receive Enable */
-#define                       MD1  0x2        /* Mailbox 1 Receive Enable */
-#define                       MD2  0x4        /* Mailbox 2 Receive Enable */
-#define                       MD3  0x8        /* Mailbox 3 Receive Enable */
-#define                       MD4  0x10       /* Mailbox 4 Receive Enable */
-#define                       MD5  0x20       /* Mailbox 5 Receive Enable */
-#define                       MD6  0x40       /* Mailbox 6 Receive Enable */
-#define                       MD7  0x80       /* Mailbox 7 Receive Enable */
-#define                       MD8  0x100      /* Mailbox 8 Receive Enable */
-#define                       MD9  0x200      /* Mailbox 9 Receive Enable */
-#define                      MD10  0x400      /* Mailbox 10 Receive Enable */
-#define                      MD11  0x800      /* Mailbox 11 Receive Enable */
-#define                      MD12  0x1000     /* Mailbox 12 Receive Enable */
-#define                      MD13  0x2000     /* Mailbox 13 Receive Enable */
-#define                      MD14  0x4000     /* Mailbox 14 Receive Enable */
-#define                      MD15  0x8000     /* Mailbox 15 Receive Enable */
-
-/* Bit masks for CAN0_MD2 */
-
-#define                      MD16  0x1        /* Mailbox 16 Receive Enable */
-#define                      MD17  0x2        /* Mailbox 17 Receive Enable */
-#define                      MD18  0x4        /* Mailbox 18 Receive Enable */
-#define                      MD19  0x8        /* Mailbox 19 Receive Enable */
-#define                      MD20  0x10       /* Mailbox 20 Receive Enable */
-#define                      MD21  0x20       /* Mailbox 21 Receive Enable */
-#define                      MD22  0x40       /* Mailbox 22 Receive Enable */
-#define                      MD23  0x80       /* Mailbox 23 Receive Enable */
-#define                      MD24  0x100      /* Mailbox 24 Receive Enable */
-#define                      MD25  0x200      /* Mailbox 25 Receive Enable */
-#define                      MD26  0x400      /* Mailbox 26 Receive Enable */
-#define                      MD27  0x800      /* Mailbox 27 Receive Enable */
-#define                      MD28  0x1000     /* Mailbox 28 Receive Enable */
-#define                      MD29  0x2000     /* Mailbox 29 Receive Enable */
-#define                      MD30  0x4000     /* Mailbox 30 Receive Enable */
-#define                      MD31  0x8000     /* Mailbox 31 Receive Enable */
-
-/* Bit masks for CAN0_RMP1 */
-
-#define                      RMP0  0x1        /* Mailbox 0 Receive Message Pending */
-#define                      RMP1  0x2        /* Mailbox 1 Receive Message Pending */
-#define                      RMP2  0x4        /* Mailbox 2 Receive Message Pending */
-#define                      RMP3  0x8        /* Mailbox 3 Receive Message Pending */
-#define                      RMP4  0x10       /* Mailbox 4 Receive Message Pending */
-#define                      RMP5  0x20       /* Mailbox 5 Receive Message Pending */
-#define                      RMP6  0x40       /* Mailbox 6 Receive Message Pending */
-#define                      RMP7  0x80       /* Mailbox 7 Receive Message Pending */
-#define                      RMP8  0x100      /* Mailbox 8 Receive Message Pending */
-#define                      RMP9  0x200      /* Mailbox 9 Receive Message Pending */
-#define                     RMP10  0x400      /* Mailbox 10 Receive Message Pending */
-#define                     RMP11  0x800      /* Mailbox 11 Receive Message Pending */
-#define                     RMP12  0x1000     /* Mailbox 12 Receive Message Pending */
-#define                     RMP13  0x2000     /* Mailbox 13 Receive Message Pending */
-#define                     RMP14  0x4000     /* Mailbox 14 Receive Message Pending */
-#define                     RMP15  0x8000     /* Mailbox 15 Receive Message Pending */
-
-/* Bit masks for CAN0_RMP2 */
-
-#define                     RMP16  0x1        /* Mailbox 16 Receive Message Pending */
-#define                     RMP17  0x2        /* Mailbox 17 Receive Message Pending */
-#define                     RMP18  0x4        /* Mailbox 18 Receive Message Pending */
-#define                     RMP19  0x8        /* Mailbox 19 Receive Message Pending */
-#define                     RMP20  0x10       /* Mailbox 20 Receive Message Pending */
-#define                     RMP21  0x20       /* Mailbox 21 Receive Message Pending */
-#define                     RMP22  0x40       /* Mailbox 22 Receive Message Pending */
-#define                     RMP23  0x80       /* Mailbox 23 Receive Message Pending */
-#define                     RMP24  0x100      /* Mailbox 24 Receive Message Pending */
-#define                     RMP25  0x200      /* Mailbox 25 Receive Message Pending */
-#define                     RMP26  0x400      /* Mailbox 26 Receive Message Pending */
-#define                     RMP27  0x800      /* Mailbox 27 Receive Message Pending */
-#define                     RMP28  0x1000     /* Mailbox 28 Receive Message Pending */
-#define                     RMP29  0x2000     /* Mailbox 29 Receive Message Pending */
-#define                     RMP30  0x4000     /* Mailbox 30 Receive Message Pending */
-#define                     RMP31  0x8000     /* Mailbox 31 Receive Message Pending */
-
-/* Bit masks for CAN0_RML1 */
-
-#define                      RML0  0x1        /* Mailbox 0 Receive Message Lost */
-#define                      RML1  0x2        /* Mailbox 1 Receive Message Lost */
-#define                      RML2  0x4        /* Mailbox 2 Receive Message Lost */
-#define                      RML3  0x8        /* Mailbox 3 Receive Message Lost */
-#define                      RML4  0x10       /* Mailbox 4 Receive Message Lost */
-#define                      RML5  0x20       /* Mailbox 5 Receive Message Lost */
-#define                      RML6  0x40       /* Mailbox 6 Receive Message Lost */
-#define                      RML7  0x80       /* Mailbox 7 Receive Message Lost */
-#define                      RML8  0x100      /* Mailbox 8 Receive Message Lost */
-#define                      RML9  0x200      /* Mailbox 9 Receive Message Lost */
-#define                     RML10  0x400      /* Mailbox 10 Receive Message Lost */
-#define                     RML11  0x800      /* Mailbox 11 Receive Message Lost */
-#define                     RML12  0x1000     /* Mailbox 12 Receive Message Lost */
-#define                     RML13  0x2000     /* Mailbox 13 Receive Message Lost */
-#define                     RML14  0x4000     /* Mailbox 14 Receive Message Lost */
-#define                     RML15  0x8000     /* Mailbox 15 Receive Message Lost */
-
-/* Bit masks for CAN0_RML2 */
-
-#define                     RML16  0x1        /* Mailbox 16 Receive Message Lost */
-#define                     RML17  0x2        /* Mailbox 17 Receive Message Lost */
-#define                     RML18  0x4        /* Mailbox 18 Receive Message Lost */
-#define                     RML19  0x8        /* Mailbox 19 Receive Message Lost */
-#define                     RML20  0x10       /* Mailbox 20 Receive Message Lost */
-#define                     RML21  0x20       /* Mailbox 21 Receive Message Lost */
-#define                     RML22  0x40       /* Mailbox 22 Receive Message Lost */
-#define                     RML23  0x80       /* Mailbox 23 Receive Message Lost */
-#define                     RML24  0x100      /* Mailbox 24 Receive Message Lost */
-#define                     RML25  0x200      /* Mailbox 25 Receive Message Lost */
-#define                     RML26  0x400      /* Mailbox 26 Receive Message Lost */
-#define                     RML27  0x800      /* Mailbox 27 Receive Message Lost */
-#define                     RML28  0x1000     /* Mailbox 28 Receive Message Lost */
-#define                     RML29  0x2000     /* Mailbox 29 Receive Message Lost */
-#define                     RML30  0x4000     /* Mailbox 30 Receive Message Lost */
-#define                     RML31  0x8000     /* Mailbox 31 Receive Message Lost */
-
-/* Bit masks for CAN0_OPSS1 */
-
-#define                     OPSS0  0x1        /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS1  0x2        /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS2  0x4        /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS3  0x8        /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS4  0x10       /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS5  0x20       /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS6  0x40       /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS7  0x80       /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS8  0x100      /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS9  0x200      /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS10  0x400      /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS11  0x800      /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS12  0x1000     /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS13  0x2000     /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS14  0x4000     /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS15  0x8000     /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
-
-/* Bit masks for CAN0_OPSS2 */
-
-#define                    OPSS16  0x1        /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS17  0x2        /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS18  0x4        /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS19  0x8        /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS20  0x10       /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS21  0x20       /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS22  0x40       /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS23  0x80       /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS24  0x100      /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS25  0x200      /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS26  0x400      /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS27  0x800      /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS28  0x1000     /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS29  0x2000     /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS30  0x4000     /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS31  0x8000     /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
-
-/* Bit masks for CAN0_TRS1 */
-
-#define                      TRS0  0x1        /* Mailbox 0 Transmit Request Set */
-#define                      TRS1  0x2        /* Mailbox 1 Transmit Request Set */
-#define                      TRS2  0x4        /* Mailbox 2 Transmit Request Set */
-#define                      TRS3  0x8        /* Mailbox 3 Transmit Request Set */
-#define                      TRS4  0x10       /* Mailbox 4 Transmit Request Set */
-#define                      TRS5  0x20       /* Mailbox 5 Transmit Request Set */
-#define                      TRS6  0x40       /* Mailbox 6 Transmit Request Set */
-#define                      TRS7  0x80       /* Mailbox 7 Transmit Request Set */
-#define                      TRS8  0x100      /* Mailbox 8 Transmit Request Set */
-#define                      TRS9  0x200      /* Mailbox 9 Transmit Request Set */
-#define                     TRS10  0x400      /* Mailbox 10 Transmit Request Set */
-#define                     TRS11  0x800      /* Mailbox 11 Transmit Request Set */
-#define                     TRS12  0x1000     /* Mailbox 12 Transmit Request Set */
-#define                     TRS13  0x2000     /* Mailbox 13 Transmit Request Set */
-#define                     TRS14  0x4000     /* Mailbox 14 Transmit Request Set */
-#define                     TRS15  0x8000     /* Mailbox 15 Transmit Request Set */
-
-/* Bit masks for CAN0_TRS2 */
-
-#define                     TRS16  0x1        /* Mailbox 16 Transmit Request Set */
-#define                     TRS17  0x2        /* Mailbox 17 Transmit Request Set */
-#define                     TRS18  0x4        /* Mailbox 18 Transmit Request Set */
-#define                     TRS19  0x8        /* Mailbox 19 Transmit Request Set */
-#define                     TRS20  0x10       /* Mailbox 20 Transmit Request Set */
-#define                     TRS21  0x20       /* Mailbox 21 Transmit Request Set */
-#define                     TRS22  0x40       /* Mailbox 22 Transmit Request Set */
-#define                     TRS23  0x80       /* Mailbox 23 Transmit Request Set */
-#define                     TRS24  0x100      /* Mailbox 24 Transmit Request Set */
-#define                     TRS25  0x200      /* Mailbox 25 Transmit Request Set */
-#define                     TRS26  0x400      /* Mailbox 26 Transmit Request Set */
-#define                     TRS27  0x800      /* Mailbox 27 Transmit Request Set */
-#define                     TRS28  0x1000     /* Mailbox 28 Transmit Request Set */
-#define                     TRS29  0x2000     /* Mailbox 29 Transmit Request Set */
-#define                     TRS30  0x4000     /* Mailbox 30 Transmit Request Set */
-#define                     TRS31  0x8000     /* Mailbox 31 Transmit Request Set */
-
-/* Bit masks for CAN0_TRR1 */
-
-#define                      TRR0  0x1        /* Mailbox 0 Transmit Request Reset */
-#define                      TRR1  0x2        /* Mailbox 1 Transmit Request Reset */
-#define                      TRR2  0x4        /* Mailbox 2 Transmit Request Reset */
-#define                      TRR3  0x8        /* Mailbox 3 Transmit Request Reset */
-#define                      TRR4  0x10       /* Mailbox 4 Transmit Request Reset */
-#define                      TRR5  0x20       /* Mailbox 5 Transmit Request Reset */
-#define                      TRR6  0x40       /* Mailbox 6 Transmit Request Reset */
-#define                      TRR7  0x80       /* Mailbox 7 Transmit Request Reset */
-#define                      TRR8  0x100      /* Mailbox 8 Transmit Request Reset */
-#define                      TRR9  0x200      /* Mailbox 9 Transmit Request Reset */
-#define                     TRR10  0x400      /* Mailbox 10 Transmit Request Reset */
-#define                     TRR11  0x800      /* Mailbox 11 Transmit Request Reset */
-#define                     TRR12  0x1000     /* Mailbox 12 Transmit Request Reset */
-#define                     TRR13  0x2000     /* Mailbox 13 Transmit Request Reset */
-#define                     TRR14  0x4000     /* Mailbox 14 Transmit Request Reset */
-#define                     TRR15  0x8000     /* Mailbox 15 Transmit Request Reset */
-
-/* Bit masks for CAN0_TRR2 */
-
-#define                     TRR16  0x1        /* Mailbox 16 Transmit Request Reset */
-#define                     TRR17  0x2        /* Mailbox 17 Transmit Request Reset */
-#define                     TRR18  0x4        /* Mailbox 18 Transmit Request Reset */
-#define                     TRR19  0x8        /* Mailbox 19 Transmit Request Reset */
-#define                     TRR20  0x10       /* Mailbox 20 Transmit Request Reset */
-#define                     TRR21  0x20       /* Mailbox 21 Transmit Request Reset */
-#define                     TRR22  0x40       /* Mailbox 22 Transmit Request Reset */
-#define                     TRR23  0x80       /* Mailbox 23 Transmit Request Reset */
-#define                     TRR24  0x100      /* Mailbox 24 Transmit Request Reset */
-#define                     TRR25  0x200      /* Mailbox 25 Transmit Request Reset */
-#define                     TRR26  0x400      /* Mailbox 26 Transmit Request Reset */
-#define                     TRR27  0x800      /* Mailbox 27 Transmit Request Reset */
-#define                     TRR28  0x1000     /* Mailbox 28 Transmit Request Reset */
-#define                     TRR29  0x2000     /* Mailbox 29 Transmit Request Reset */
-#define                     TRR30  0x4000     /* Mailbox 30 Transmit Request Reset */
-#define                     TRR31  0x8000     /* Mailbox 31 Transmit Request Reset */
-
-/* Bit masks for CAN0_AA1 */
-
-#define                       AA0  0x1        /* Mailbox 0 Abort Acknowledge */
-#define                       AA1  0x2        /* Mailbox 1 Abort Acknowledge */
-#define                       AA2  0x4        /* Mailbox 2 Abort Acknowledge */
-#define                       AA3  0x8        /* Mailbox 3 Abort Acknowledge */
-#define                       AA4  0x10       /* Mailbox 4 Abort Acknowledge */
-#define                       AA5  0x20       /* Mailbox 5 Abort Acknowledge */
-#define                       AA6  0x40       /* Mailbox 6 Abort Acknowledge */
-#define                       AA7  0x80       /* Mailbox 7 Abort Acknowledge */
-#define                       AA8  0x100      /* Mailbox 8 Abort Acknowledge */
-#define                       AA9  0x200      /* Mailbox 9 Abort Acknowledge */
-#define                      AA10  0x400      /* Mailbox 10 Abort Acknowledge */
-#define                      AA11  0x800      /* Mailbox 11 Abort Acknowledge */
-#define                      AA12  0x1000     /* Mailbox 12 Abort Acknowledge */
-#define                      AA13  0x2000     /* Mailbox 13 Abort Acknowledge */
-#define                      AA14  0x4000     /* Mailbox 14 Abort Acknowledge */
-#define                      AA15  0x8000     /* Mailbox 15 Abort Acknowledge */
-
-/* Bit masks for CAN0_AA2 */
-
-#define                      AA16  0x1        /* Mailbox 16 Abort Acknowledge */
-#define                      AA17  0x2        /* Mailbox 17 Abort Acknowledge */
-#define                      AA18  0x4        /* Mailbox 18 Abort Acknowledge */
-#define                      AA19  0x8        /* Mailbox 19 Abort Acknowledge */
-#define                      AA20  0x10       /* Mailbox 20 Abort Acknowledge */
-#define                      AA21  0x20       /* Mailbox 21 Abort Acknowledge */
-#define                      AA22  0x40       /* Mailbox 22 Abort Acknowledge */
-#define                      AA23  0x80       /* Mailbox 23 Abort Acknowledge */
-#define                      AA24  0x100      /* Mailbox 24 Abort Acknowledge */
-#define                      AA25  0x200      /* Mailbox 25 Abort Acknowledge */
-#define                      AA26  0x400      /* Mailbox 26 Abort Acknowledge */
-#define                      AA27  0x800      /* Mailbox 27 Abort Acknowledge */
-#define                      AA28  0x1000     /* Mailbox 28 Abort Acknowledge */
-#define                      AA29  0x2000     /* Mailbox 29 Abort Acknowledge */
-#define                      AA30  0x4000     /* Mailbox 30 Abort Acknowledge */
-#define                      AA31  0x8000     /* Mailbox 31 Abort Acknowledge */
-
-/* Bit masks for CAN0_TA1 */
-
-#define                       TA0  0x1        /* Mailbox 0 Transmit Acknowledge */
-#define                       TA1  0x2        /* Mailbox 1 Transmit Acknowledge */
-#define                       TA2  0x4        /* Mailbox 2 Transmit Acknowledge */
-#define                       TA3  0x8        /* Mailbox 3 Transmit Acknowledge */
-#define                       TA4  0x10       /* Mailbox 4 Transmit Acknowledge */
-#define                       TA5  0x20       /* Mailbox 5 Transmit Acknowledge */
-#define                       TA6  0x40       /* Mailbox 6 Transmit Acknowledge */
-#define                       TA7  0x80       /* Mailbox 7 Transmit Acknowledge */
-#define                       TA8  0x100      /* Mailbox 8 Transmit Acknowledge */
-#define                       TA9  0x200      /* Mailbox 9 Transmit Acknowledge */
-#define                      TA10  0x400      /* Mailbox 10 Transmit Acknowledge */
-#define                      TA11  0x800      /* Mailbox 11 Transmit Acknowledge */
-#define                      TA12  0x1000     /* Mailbox 12 Transmit Acknowledge */
-#define                      TA13  0x2000     /* Mailbox 13 Transmit Acknowledge */
-#define                      TA14  0x4000     /* Mailbox 14 Transmit Acknowledge */
-#define                      TA15  0x8000     /* Mailbox 15 Transmit Acknowledge */
-
-/* Bit masks for CAN0_TA2 */
-
-#define                      TA16  0x1        /* Mailbox 16 Transmit Acknowledge */
-#define                      TA17  0x2        /* Mailbox 17 Transmit Acknowledge */
-#define                      TA18  0x4        /* Mailbox 18 Transmit Acknowledge */
-#define                      TA19  0x8        /* Mailbox 19 Transmit Acknowledge */
-#define                      TA20  0x10       /* Mailbox 20 Transmit Acknowledge */
-#define                      TA21  0x20       /* Mailbox 21 Transmit Acknowledge */
-#define                      TA22  0x40       /* Mailbox 22 Transmit Acknowledge */
-#define                      TA23  0x80       /* Mailbox 23 Transmit Acknowledge */
-#define                      TA24  0x100      /* Mailbox 24 Transmit Acknowledge */
-#define                      TA25  0x200      /* Mailbox 25 Transmit Acknowledge */
-#define                      TA26  0x400      /* Mailbox 26 Transmit Acknowledge */
-#define                      TA27  0x800      /* Mailbox 27 Transmit Acknowledge */
-#define                      TA28  0x1000     /* Mailbox 28 Transmit Acknowledge */
-#define                      TA29  0x2000     /* Mailbox 29 Transmit Acknowledge */
-#define                      TA30  0x4000     /* Mailbox 30 Transmit Acknowledge */
-#define                      TA31  0x8000     /* Mailbox 31 Transmit Acknowledge */
-
-/* Bit masks for CAN0_RFH1 */
-
-#define                      RFH0  0x1        /* Mailbox 0 Remote Frame Handling Enable */
-#define                      RFH1  0x2        /* Mailbox 1 Remote Frame Handling Enable */
-#define                      RFH2  0x4        /* Mailbox 2 Remote Frame Handling Enable */
-#define                      RFH3  0x8        /* Mailbox 3 Remote Frame Handling Enable */
-#define                      RFH4  0x10       /* Mailbox 4 Remote Frame Handling Enable */
-#define                      RFH5  0x20       /* Mailbox 5 Remote Frame Handling Enable */
-#define                      RFH6  0x40       /* Mailbox 6 Remote Frame Handling Enable */
-#define                      RFH7  0x80       /* Mailbox 7 Remote Frame Handling Enable */
-#define                      RFH8  0x100      /* Mailbox 8 Remote Frame Handling Enable */
-#define                      RFH9  0x200      /* Mailbox 9 Remote Frame Handling Enable */
-#define                     RFH10  0x400      /* Mailbox 10 Remote Frame Handling Enable */
-#define                     RFH11  0x800      /* Mailbox 11 Remote Frame Handling Enable */
-#define                     RFH12  0x1000     /* Mailbox 12 Remote Frame Handling Enable */
-#define                     RFH13  0x2000     /* Mailbox 13 Remote Frame Handling Enable */
-#define                     RFH14  0x4000     /* Mailbox 14 Remote Frame Handling Enable */
-#define                     RFH15  0x8000     /* Mailbox 15 Remote Frame Handling Enable */
-
-/* Bit masks for CAN0_RFH2 */
-
-#define                     RFH16  0x1        /* Mailbox 16 Remote Frame Handling Enable */
-#define                     RFH17  0x2        /* Mailbox 17 Remote Frame Handling Enable */
-#define                     RFH18  0x4        /* Mailbox 18 Remote Frame Handling Enable */
-#define                     RFH19  0x8        /* Mailbox 19 Remote Frame Handling Enable */
-#define                     RFH20  0x10       /* Mailbox 20 Remote Frame Handling Enable */
-#define                     RFH21  0x20       /* Mailbox 21 Remote Frame Handling Enable */
-#define                     RFH22  0x40       /* Mailbox 22 Remote Frame Handling Enable */
-#define                     RFH23  0x80       /* Mailbox 23 Remote Frame Handling Enable */
-#define                     RFH24  0x100      /* Mailbox 24 Remote Frame Handling Enable */
-#define                     RFH25  0x200      /* Mailbox 25 Remote Frame Handling Enable */
-#define                     RFH26  0x400      /* Mailbox 26 Remote Frame Handling Enable */
-#define                     RFH27  0x800      /* Mailbox 27 Remote Frame Handling Enable */
-#define                     RFH28  0x1000     /* Mailbox 28 Remote Frame Handling Enable */
-#define                     RFH29  0x2000     /* Mailbox 29 Remote Frame Handling Enable */
-#define                     RFH30  0x4000     /* Mailbox 30 Remote Frame Handling Enable */
-#define                     RFH31  0x8000     /* Mailbox 31 Remote Frame Handling Enable */
-
-/* Bit masks for CAN0_MBIM1 */
-
-#define                     MBIM0  0x1        /* Mailbox 0 Mailbox Interrupt Mask */
-#define                     MBIM1  0x2        /* Mailbox 1 Mailbox Interrupt Mask */
-#define                     MBIM2  0x4        /* Mailbox 2 Mailbox Interrupt Mask */
-#define                     MBIM3  0x8        /* Mailbox 3 Mailbox Interrupt Mask */
-#define                     MBIM4  0x10       /* Mailbox 4 Mailbox Interrupt Mask */
-#define                     MBIM5  0x20       /* Mailbox 5 Mailbox Interrupt Mask */
-#define                     MBIM6  0x40       /* Mailbox 6 Mailbox Interrupt Mask */
-#define                     MBIM7  0x80       /* Mailbox 7 Mailbox Interrupt Mask */
-#define                     MBIM8  0x100      /* Mailbox 8 Mailbox Interrupt Mask */
-#define                     MBIM9  0x200      /* Mailbox 9 Mailbox Interrupt Mask */
-#define                    MBIM10  0x400      /* Mailbox 10 Mailbox Interrupt Mask */
-#define                    MBIM11  0x800      /* Mailbox 11 Mailbox Interrupt Mask */
-#define                    MBIM12  0x1000     /* Mailbox 12 Mailbox Interrupt Mask */
-#define                    MBIM13  0x2000     /* Mailbox 13 Mailbox Interrupt Mask */
-#define                    MBIM14  0x4000     /* Mailbox 14 Mailbox Interrupt Mask */
-#define                    MBIM15  0x8000     /* Mailbox 15 Mailbox Interrupt Mask */
-
-/* Bit masks for CAN0_MBIM2 */
-
-#define                    MBIM16  0x1        /* Mailbox 16 Mailbox Interrupt Mask */
-#define                    MBIM17  0x2        /* Mailbox 17 Mailbox Interrupt Mask */
-#define                    MBIM18  0x4        /* Mailbox 18 Mailbox Interrupt Mask */
-#define                    MBIM19  0x8        /* Mailbox 19 Mailbox Interrupt Mask */
-#define                    MBIM20  0x10       /* Mailbox 20 Mailbox Interrupt Mask */
-#define                    MBIM21  0x20       /* Mailbox 21 Mailbox Interrupt Mask */
-#define                    MBIM22  0x40       /* Mailbox 22 Mailbox Interrupt Mask */
-#define                    MBIM23  0x80       /* Mailbox 23 Mailbox Interrupt Mask */
-#define                    MBIM24  0x100      /* Mailbox 24 Mailbox Interrupt Mask */
-#define                    MBIM25  0x200      /* Mailbox 25 Mailbox Interrupt Mask */
-#define                    MBIM26  0x400      /* Mailbox 26 Mailbox Interrupt Mask */
-#define                    MBIM27  0x800      /* Mailbox 27 Mailbox Interrupt Mask */
-#define                    MBIM28  0x1000     /* Mailbox 28 Mailbox Interrupt Mask */
-#define                    MBIM29  0x2000     /* Mailbox 29 Mailbox Interrupt Mask */
-#define                    MBIM30  0x4000     /* Mailbox 30 Mailbox Interrupt Mask */
-#define                    MBIM31  0x8000     /* Mailbox 31 Mailbox Interrupt Mask */
-
-/* Bit masks for CAN0_MBTIF1 */
-
-#define                    MBTIF0  0x1        /* Mailbox 0 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF1  0x2        /* Mailbox 1 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF2  0x4        /* Mailbox 2 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF3  0x8        /* Mailbox 3 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF4  0x10       /* Mailbox 4 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF5  0x20       /* Mailbox 5 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF6  0x40       /* Mailbox 6 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF7  0x80       /* Mailbox 7 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF8  0x100      /* Mailbox 8 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF9  0x200      /* Mailbox 9 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF10  0x400      /* Mailbox 10 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF11  0x800      /* Mailbox 11 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF12  0x1000     /* Mailbox 12 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF13  0x2000     /* Mailbox 13 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF14  0x4000     /* Mailbox 14 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF15  0x8000     /* Mailbox 15 Mailbox Transmit Interrupt Flag */
-
-/* Bit masks for CAN0_MBTIF2 */
-
-#define                   MBTIF16  0x1        /* Mailbox 16 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF17  0x2        /* Mailbox 17 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF18  0x4        /* Mailbox 18 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF19  0x8        /* Mailbox 19 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF20  0x10       /* Mailbox 20 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF21  0x20       /* Mailbox 21 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF22  0x40       /* Mailbox 22 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF23  0x80       /* Mailbox 23 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF24  0x100      /* Mailbox 24 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF25  0x200      /* Mailbox 25 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF26  0x400      /* Mailbox 26 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF27  0x800      /* Mailbox 27 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF28  0x1000     /* Mailbox 28 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF29  0x2000     /* Mailbox 29 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF30  0x4000     /* Mailbox 30 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF31  0x8000     /* Mailbox 31 Mailbox Transmit Interrupt Flag */
-
-/* Bit masks for CAN0_MBRIF1 */
-
-#define                    MBRIF0  0x1        /* Mailbox 0 Mailbox Receive Interrupt Flag */
-#define                    MBRIF1  0x2        /* Mailbox 1 Mailbox Receive Interrupt Flag */
-#define                    MBRIF2  0x4        /* Mailbox 2 Mailbox Receive Interrupt Flag */
-#define                    MBRIF3  0x8        /* Mailbox 3 Mailbox Receive Interrupt Flag */
-#define                    MBRIF4  0x10       /* Mailbox 4 Mailbox Receive Interrupt Flag */
-#define                    MBRIF5  0x20       /* Mailbox 5 Mailbox Receive Interrupt Flag */
-#define                    MBRIF6  0x40       /* Mailbox 6 Mailbox Receive Interrupt Flag */
-#define                    MBRIF7  0x80       /* Mailbox 7 Mailbox Receive Interrupt Flag */
-#define                    MBRIF8  0x100      /* Mailbox 8 Mailbox Receive Interrupt Flag */
-#define                    MBRIF9  0x200      /* Mailbox 9 Mailbox Receive Interrupt Flag */
-#define                   MBRIF10  0x400      /* Mailbox 10 Mailbox Receive Interrupt Flag */
-#define                   MBRIF11  0x800      /* Mailbox 11 Mailbox Receive Interrupt Flag */
-#define                   MBRIF12  0x1000     /* Mailbox 12 Mailbox Receive Interrupt Flag */
-#define                   MBRIF13  0x2000     /* Mailbox 13 Mailbox Receive Interrupt Flag */
-#define                   MBRIF14  0x4000     /* Mailbox 14 Mailbox Receive Interrupt Flag */
-#define                   MBRIF15  0x8000     /* Mailbox 15 Mailbox Receive Interrupt Flag */
-
-/* Bit masks for CAN0_MBRIF2 */
-
-#define                   MBRIF16  0x1        /* Mailbox 16 Mailbox Receive Interrupt Flag */
-#define                   MBRIF17  0x2        /* Mailbox 17 Mailbox Receive Interrupt Flag */
-#define                   MBRIF18  0x4        /* Mailbox 18 Mailbox Receive Interrupt Flag */
-#define                   MBRIF19  0x8        /* Mailbox 19 Mailbox Receive Interrupt Flag */
-#define                   MBRIF20  0x10       /* Mailbox 20 Mailbox Receive Interrupt Flag */
-#define                   MBRIF21  0x20       /* Mailbox 21 Mailbox Receive Interrupt Flag */
-#define                   MBRIF22  0x40       /* Mailbox 22 Mailbox Receive Interrupt Flag */
-#define                   MBRIF23  0x80       /* Mailbox 23 Mailbox Receive Interrupt Flag */
-#define                   MBRIF24  0x100      /* Mailbox 24 Mailbox Receive Interrupt Flag */
-#define                   MBRIF25  0x200      /* Mailbox 25 Mailbox Receive Interrupt Flag */
-#define                   MBRIF26  0x400      /* Mailbox 26 Mailbox Receive Interrupt Flag */
-#define                   MBRIF27  0x800      /* Mailbox 27 Mailbox Receive Interrupt Flag */
-#define                   MBRIF28  0x1000     /* Mailbox 28 Mailbox Receive Interrupt Flag */
-#define                   MBRIF29  0x2000     /* Mailbox 29 Mailbox Receive Interrupt Flag */
-#define                   MBRIF30  0x4000     /* Mailbox 30 Mailbox Receive Interrupt Flag */
-#define                   MBRIF31  0x8000     /* Mailbox 31 Mailbox Receive Interrupt Flag */
-
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 5163e2c383c..bfcfa86db2b 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -44,6 +44,7 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -112,7 +113,7 @@ static struct resource bfin_i2c_pca_resources[] = {
 struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
 	.gpio = -1,
 	.i2c_clock_speed = 330000,
-	.timeout = 10000
+	.timeout = HZ,
 };
 
 /* PCA9564 I2C Bus driver */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 7ad8878bfa1..1c8c4c7245c 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -92,26 +92,29 @@ static void __init search_IAR(void)
 {
 	unsigned ivg, irq_pos = 0;
 	for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
-		int irqn;
+		int irqN;
 
 		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
 
-		for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
-			int iar_shift = (irqn & 7) * 4;
-				if (ivg == (0xf &
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) \
-	|| defined(CONFIG_BF539) || defined(CONFIG_BF51x)
-			     bfin_read32((unsigned long *)SIC_IAR0 +
-					 ((irqn % 32) >> 3) + ((irqn / 32) *
-					 ((SIC_IAR4 - SIC_IAR0) / 4))) >> iar_shift)) {
+		for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) {
+			int irqn;
+			u32 iar = bfin_read32((unsigned long *)SIC_IAR0 +
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \
+	defined(CONFIG_BF538) || defined(CONFIG_BF539)
+				((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4))
 #else
-			     bfin_read32((unsigned long *)SIC_IAR0 +
-					 (irqn >> 3)) >> iar_shift)) {
+				(irqN >> 3)
 #endif
-				ivg_table[irq_pos].irqno = IVG7 + irqn;
-				ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
-				ivg7_13[ivg].istop++;
-				irq_pos++;
+				);
+
+			for (irqn = irqN; irqn < irqN + 4; ++irqn) {
+				int iar_shift = (irqn & 7) * 4;
+				if (ivg == (0xf & (iar >> iar_shift))) {
+					ivg_table[irq_pos].irqno = IVG7 + irqn;
+					ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
+					ivg7_13[ivg].istop++;
+					irq_pos++;
+				}
 			}
 		}
 	}
@@ -662,14 +665,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 #ifdef CONFIG_PM
 int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
 {
-	unsigned gpio = irq_to_gpio(irq);
-
-	if (state)
-		gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
-	else
-		gpio_pm_wakeup_free(gpio);
-
-	return 0;
+	return gpio_pm_wakeup_ctrl(irq_to_gpio(irq), state);
 }
 #endif
 
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index c1f1ccc846f..ea7f95f6bb4 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -20,35 +20,11 @@
 #include <asm/dma.h>
 #include <asm/dpmc.h>
 
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
-#define WAKEUP_TYPE	PM_WAKE_HIGH
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
-#define WAKEUP_TYPE	PM_WAKE_LOW
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
-#define WAKEUP_TYPE	PM_WAKE_FALLING
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
-#define WAKEUP_TYPE	PM_WAKE_RISING
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
-#define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
-#endif
-
 
 void bfin_pm_suspend_standby_enter(void)
 {
 	unsigned long flags;
 
-#ifdef CONFIG_PM_WAKEUP_BY_GPIO
-	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
-#endif
-
 	local_irq_save_hw(flags);
 	bfin_pm_standby_setup();
 
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 7cecbaf0358..a17107a700d 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -170,8 +170,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 			kfree(msg);
 			break;
 		default:
-			printk(KERN_CRIT "CPU%u: Unknown IPI message \
-			0x%lx\n", cpu, msg->type);
+			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
+			       cpu, msg->type);
 			kfree(msg);
 			break;
 		}
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 355b87aa6b9..bb4e8fff4b5 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -15,23 +15,11 @@
 #include "blackfin_sram.h"
 
 /*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
+ * ZERO_PAGE is a special page that is used for zero-initialized data and COW.
+ * Let the bss do its zero-init magic so we don't have to do it ourselves.
  */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-static unsigned long empty_zero_page;
+char empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+EXPORT_SYMBOL(empty_zero_page);
 
 #ifndef CONFIG_EXCEPTION_L1_SCRATCH
 #if defined CONFIG_SYSCALL_TAB_L1
@@ -52,40 +40,26 @@ EXPORT_SYMBOL(cpu_pda);
 void __init paging_init(void)
 {
 	/*
-	 * make sure start_mem is page aligned,  otherwise bootmem and
-	 * page_alloc get different views og the world
+	 * make sure start_mem is page aligned, otherwise bootmem and
+	 * page_alloc get different views of the world
 	 */
 	unsigned long end_mem = memory_end & PAGE_MASK;
 
-	pr_debug("start_mem is %#lx   virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem);
-
-	/*
-	 * initialize the bad page table and bad page to point
-	 * to a couple of allocated pages
-	 */
-	empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	memset((void *)empty_zero_page, 0, PAGE_SIZE);
+	unsigned long zones_size[MAX_NR_ZONES] = {
+		[0] = 0,
+		[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT,
+		[ZONE_NORMAL] = 0,
+#ifdef CONFIG_HIGHMEM
+		[ZONE_HIGHMEM] = 0,
+#endif
+	};
 
-	/*
-	 * Set up SFC/DFC registers (user data space)
-	 */
+	/* Set up SFC/DFC registers (user data space) */
 	set_fs(KERNEL_DS);
 
-	pr_debug("free_area_init -> start_mem is %#lx   virtual_end is %#lx\n",
+	pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
 	        PAGE_ALIGN(memory_start), end_mem);
-
-	{
-		unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-
-		zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-		zones_size[ZONE_NORMAL] = 0;
-#ifdef CONFIG_HIGHMEM
-		zones_size[ZONE_HIGHMEM] = 0;
-#endif
-		free_area_init(zones_size);
-	}
+	free_area_init(zones_size);
 }
 
 asmlinkage void __init init_pda(void)
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index 39b058564f6..7e2e674ed44 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -43,13 +43,12 @@ static DEFINE_SPINLOCK(dtest_lock);
 /* Takes a void pointer */
 #define IADDR2DTEST(x) \
 	({ unsigned long __addr = (unsigned long)(x); \
-		(__addr & 0x47F8)        | /* address bits 14 & 10:3 */ \
-		(__addr & 0x8000) << 23  | /* Bank A/B               */ \
-		(__addr & 0x0800) << 15  | /* address bit  11        */ \
-		(__addr & 0x3000) <<  4  | /* address bits 13:12     */ \
-		(__addr & 0x8000) <<  8  | /* address bit  15        */ \
-		(0x1000000)              | /* instruction access = 1 */ \
-		(0x4);                     /* data array = 1         */ \
+		((__addr & (1 << 11)) << (26 - 11)) | /* addr bit 11 (Way0/Way1)   */ \
+		(1 << 24)                           | /* instruction access = 1    */ \
+		((__addr & (1 << 15)) << (23 - 15)) | /* addr bit 15 (Data Bank)   */ \
+		((__addr & (3 << 12)) << (16 - 12)) | /* addr bits 13:12 (Subbank) */ \
+		(__addr & 0x47F8)                   | /* addr bits 14 & 10:3       */ \
+		(1 << 2);                             /* data array = 1            */ \
 	})
 
 /* Takes a pointer, and returns the offset (in bits) which things should be shifted */
@@ -196,7 +195,7 @@ EXPORT_SYMBOL(isram_memcpy);
 
 #ifdef CONFIG_BFIN_ISRAM_SELF_TEST
 
-#define TEST_LEN 0x100
+static int test_len = 0x20000;
 
 static __init void hex_dump(unsigned char *buf, int len)
 {
@@ -212,15 +211,15 @@ static __init int isram_read_test(char *sdram, void *l1inst)
 	pr_info("INFO: running isram_read tests\n");
 
 	/* setup some different data to play with */
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
-	dma_memcpy(l1inst, sdram, TEST_LEN);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
 
 	/* make sure we can read the L1 inst */
-	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 		data1 = isram_read(l1inst + i);
 		memcpy(&data2, sdram + i, sizeof(data2));
-		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+		if (data1 != data2) {
 			pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
 				l1inst + i, data1, data2);
 			++ret;
@@ -238,25 +237,25 @@ static __init int isram_write_test(char *sdram, void *l1inst)
 	pr_info("INFO: running isram_write tests\n");
 
 	/* setup some different data to play with */
-	memset(sdram, 0, TEST_LEN * 2);
-	dma_memcpy(l1inst, sdram, TEST_LEN);
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
+	memset(sdram, 0, test_len * 2);
+	dma_memcpy(l1inst, sdram, test_len);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
 
 	/* make sure we can write the L1 inst */
-	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 		memcpy(&data1, sdram + i, sizeof(data1));
 		isram_write(l1inst + i, data1);
 		data2 = isram_read(l1inst + i);
-		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+		if (data1 != data2) {
 			pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
 				l1inst + i, data1, data2);
 			++ret;
 		}
 	}
 
-	dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
-	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+	dma_memcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
 		pr_err("FAIL: isram_write() did not work properly\n");
 		++ret;
 	}
@@ -268,12 +267,12 @@ static __init int
 _isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
                    void *(*fmemcpy)(void *, const void *, size_t))
 {
-	memset(sdram, pattern, TEST_LEN);
-	fmemcpy(l1inst, sdram, TEST_LEN);
-	fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
-	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+	memset(sdram, pattern, test_len);
+	fmemcpy(l1inst, sdram, test_len);
+	fmemcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
 		pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
-			smemcpy, l1inst, sdram, TEST_LEN, pattern);
+			smemcpy, l1inst, sdram, test_len, pattern);
 		return 1;
 	}
 	return 0;
@@ -292,12 +291,13 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 	/* check read of small, unaligned, and hardware 64bit limits */
 	pr_info("INFO: running isram_memcpy (read) tests\n");
 
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
-	dma_memcpy(l1inst, sdram, TEST_LEN);
+	/* setup some different data to play with */
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
 
 	thisret = 0;
-	for (i = 0; i < TEST_LEN - 32; ++i) {
+	for (i = 0; i < test_len - 32; ++i) {
 		unsigned char cmp[32];
 		for (j = 1; j <= 32; ++j) {
 			memset(cmp, 0, sizeof(cmp));
@@ -310,7 +310,7 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 				pr_cont("\n");
 				if (++thisret > 20) {
 					pr_err("FAIL: skipping remaining series\n");
-					i = TEST_LEN;
+					i = test_len;
 					break;
 				}
 			}
@@ -321,11 +321,11 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 	/* check write of small, unaligned, and hardware 64bit limits */
 	pr_info("INFO: running isram_memcpy (write) tests\n");
 
-	memset(sdram + TEST_LEN, 0, TEST_LEN);
-	dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
+	memset(sdram + test_len, 0, test_len);
+	dma_memcpy(l1inst, sdram + test_len, test_len);
 
 	thisret = 0;
-	for (i = 0; i < TEST_LEN - 32; ++i) {
+	for (i = 0; i < test_len - 32; ++i) {
 		unsigned char cmp[32];
 		for (j = 1; j <= 32; ++j) {
 			isram_memcpy(l1inst + i, sdram + i, j);
@@ -338,7 +338,7 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 				pr_cont("\n");
 				if (++thisret > 20) {
 					pr_err("FAIL: skipping remaining series\n");
-					i = TEST_LEN;
+					i = test_len;
 					break;
 				}
 			}
@@ -355,22 +355,30 @@ static __init int isram_test_init(void)
 	char *sdram;
 	void *l1inst;
 
-	sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
-	if (!sdram) {
-		pr_warning("SKIP: could not allocate sdram\n");
-		return 0;
+	/* Try to test as much of L1SRAM as possible */
+	while (test_len) {
+		test_len >>= 1;
+		l1inst = l1_inst_sram_alloc(test_len);
+		if (l1inst)
+			break;
 	}
-
-	l1inst = l1_inst_sram_alloc(TEST_LEN);
 	if (!l1inst) {
-		kfree(sdram);
 		pr_warning("SKIP: could not allocate L1 inst\n");
 		return 0;
 	}
+	pr_info("INFO: testing %#x bytes (%p - %p)\n",
+	        test_len, l1inst, l1inst + test_len);
+
+	sdram = kmalloc(test_len * 2, GFP_KERNEL);
+	if (!sdram) {
+		sram_free(l1inst);
+		pr_warning("SKIP: could not allocate sdram\n");
+		return 0;
+	}
 
 	/* sanity check initial L1 inst state */
 	ret = 1;
-	pr_info("INFO: running initial dma_memcpy checks\n");
+	pr_info("INFO: running initial dma_memcpy checks %p\n", sdram);
 	if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
 		goto abort;
 	if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 49b2ff2c8b7..627e04b5ba9 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -256,7 +256,8 @@ static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
 		plast->next = pslot->next;
 		pavail = pslot;
 	} else {
-		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		/* use atomic so our L1 allocator can be used atomically */
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_ATOMIC);
 
 		if (!pavail)
 			return NULL;