Merge tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM platform specific firmware interfaces from Olof Johansson:
 "Two platforms, bcm and exynos have their own firmware interfaces using
  the "secure monitor call", this adds support for those.

  We had originally planned to have a third set of patches in here,
  which would extend support for the existing generic "psci" call that
  is used on multiple platforms as well as Xen and KVM guests, but that
  ended up getting dropped because the patches were not ready in time."

* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm: mark bcm_kona_smc_init as __init
  ARM: bcm281xx: Add DT support for SMC handler
  ARM: bcm281xx: Add L2 cache enable code
  ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
  ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
  ARM: EXYNOS: Add support for Exynos secure firmware
  ARM: EXYNOS: Add support for secure monitor calls
  ARM: Add interface for registering and calling firmware-specific operations

19 files changed, 554 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 8f71f40722b..41b2c6c33f0 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -31,6 +31,11 @@
 		      <0x3ff00100 0x100>;
 	};
 
+	smc@0x3404c000 {
+		compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
+		reg = <0x3404c000 0x400>; //1 KiB in SRAM
+	};
+
 	uart@3e000000 {
 		compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 53e68b16319..48434cbe3e8 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the linux kernel.
 #
 
+obj-y				+= firmware.o
+
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
diff --git a/arch/arm/common/firmware.c b/arch/arm/common/firmware.c
new file mode 100644
index 00000000000..27ddccb1131
--- /dev/null
+++ b/arch/arm/common/firmware.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+
+#include <asm/firmware.h>
+
+static const struct firmware_ops default_firmware_ops;
+
+const struct firmware_ops *firmware_ops = &default_firmware_ops;
diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h
new file mode 100644
index 00000000000..15631300c23
--- /dev/null
+++ b/arch/arm/include/asm/firmware.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_FIRMWARE_H
+#define __ASM_ARM_FIRMWARE_H
+
+#include <linux/bug.h>
+
+/*
+ * struct firmware_ops
+ *
+ * A structure to specify available firmware operations.
+ *
+ * A filled up structure can be registered with register_firmware_ops().
+ */
+struct firmware_ops {
+	/*
+	 * Enters CPU idle mode
+	 */
+	int (*do_idle)(void);
+	/*
+	 * Sets boot address of specified physical CPU
+	 */
+	int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr);
+	/*
+	 * Boots specified physical CPU
+	 */
+	int (*cpu_boot)(int cpu);
+	/*
+	 * Initializes L2 cache
+	 */
+	int (*l2x0_init)(void);
+};
+
+/* Global pointer for current firmware_ops structure, can't be NULL. */
+extern const struct firmware_ops *firmware_ops;
+
+/*
+ * call_firmware_op(op, ...)
+ *
+ * Checks if firmware operation is present and calls it,
+ * otherwise returns -ENOSYS
+ */
+#define call_firmware_op(op, ...)					\
+	((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS))
+
+/*
+ * register_firmware_ops(ops)
+ *
+ * A function to register platform firmware_ops struct.
+ */
+static inline void register_firmware_ops(const struct firmware_ops *ops)
+{
+	BUG_ON(!ops);
+
+	firmware_ops = ops;
+}
+
+#endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index bbf412261e5..6adb6aecf48 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -10,4 +10,6 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-obj-$(CONFIG_ARCH_BCM) := board_bcm.o
+obj-$(CONFIG_ARCH_BCM)		:= board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
new file mode 100644
index 00000000000..56d9d19b247
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdarg.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+
+#include <asm/cacheflush.h>
+#include <linux/of_address.h>
+
+#include "bcm_kona_smc.h"
+
+struct secure_bridge_data {
+	void __iomem *bounce;		/* virtual address */
+	u32 __iomem buffer_addr;	/* physical address */
+	int initialized;
+} bridge_data;
+
+struct bcm_kona_smc_data {
+	unsigned service_id;
+	unsigned arg0;
+	unsigned arg1;
+	unsigned arg2;
+	unsigned arg3;
+};
+
+static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
+	{.compatible = "bcm,kona-smc"},
+	{},
+};
+
+/* Map in the bounce area */
+void __init bcm_kona_smc_init(void)
+{
+	struct device_node *node;
+
+	/* Read buffer addr and size from the device tree node */
+	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
+	BUG_ON(!node);
+
+	/* Don't care about size or flags of the DT node */
+	bridge_data.buffer_addr =
+		be32_to_cpu(*of_get_address(node, 0, NULL, NULL));
+	BUG_ON(!bridge_data.buffer_addr);
+
+	bridge_data.bounce = of_iomap(node, 0);
+	BUG_ON(!bridge_data.bounce);
+
+	bridge_data.initialized = 1;
+
+	pr_info("Secure API initialized!\n");
+}
+
+/* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */
+static void __bcm_kona_smc(void *info)
+{
+	struct bcm_kona_smc_data *data = info;
+	u32 *args = bridge_data.bounce;
+	int rc = 0;
+
+	/* Must run on CPU 0 */
+	BUG_ON(smp_processor_id() != 0);
+
+	/* Check map in the bounce area */
+	BUG_ON(!bridge_data.initialized);
+
+	/* Copy one 32 bit word into the bounce area */
+	args[0] = data->arg0;
+	args[1] = data->arg1;
+	args[2] = data->arg2;
+	args[3] = data->arg3;
+
+	/* Flush caches for input data passed to Secure Monitor */
+	if (data->service_id != SSAPI_BRCM_START_VC_CORE)
+		flush_cache_all();
+
+	/* Trap into Secure Monitor */
+	rc = bcm_kona_smc_asm(data->service_id, bridge_data.buffer_addr);
+
+	if (rc != SEC_ROM_RET_OK)
+		pr_err("Secure Monitor call failed (0x%x)!\n", rc);
+}
+
+unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1,
+		  unsigned arg2, unsigned arg3)
+{
+	struct bcm_kona_smc_data data;
+
+	data.service_id = service_id;
+	data.arg0 = arg0;
+	data.arg1 = arg1;
+	data.arg2 = arg2;
+	data.arg3 = arg3;
+
+	/*
+	 * Due to a limitation of the secure monitor, we must use the SMP
+	 * infrastructure to forward all secure monitor calls to Core 0.
+	 */
+	if (get_cpu() != 0)
+		smp_call_function_single(0, __bcm_kona_smc, (void *)&data, 1);
+	else
+		__bcm_kona_smc(&data);
+
+	put_cpu();
+
+	return 0;
+}
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h
new file mode 100644
index 00000000000..3bedbed1c21
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_kona_smc.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef BCM_KONA_SMC_H
+#define BCM_KONA_SMC_H
+
+#include <linux/types.h>
+#define FLAGS	(SEC_ROM_ICACHE_ENABLE_MASK | SEC_ROM_DCACHE_ENABLE_MASK | \
+			SEC_ROM_IRQ_ENABLE_MASK | SEC_ROM_FIQ_ENABLE_MASK)
+
+/*!
+ * Definitions for IRQ & FIQ Mask for ARM
+ */
+
+#define FIQ_IRQ_MASK						0xC0
+#define FIQ_MASK						0x40
+#define IRQ_MASK						0x80
+
+/*!
+ * Secure Mode FLAGs
+ */
+
+/* When set, enables ICache within the secure mode */
+#define SEC_ROM_ICACHE_ENABLE_MASK                        0x00000001
+
+/* When set, enables DCache within the secure mode */
+#define SEC_ROM_DCACHE_ENABLE_MASK                        0x00000002
+
+/* When set, enables IRQ within the secure mode */
+#define SEC_ROM_IRQ_ENABLE_MASK                           0x00000004
+
+/* When set, enables FIQ within the secure mode */
+#define SEC_ROM_FIQ_ENABLE_MASK                           0x00000008
+
+/* When set, enables Unified L2 cache within the secure mode */
+#define SEC_ROM_UL2_CACHE_ENABLE_MASK                     0x00000010
+
+/* Broadcom Secure Service API Service IDs */
+#define SSAPI_DORMANT_ENTRY_SERV                          0x01000000
+#define SSAPI_PUBLIC_OTP_SERV                             0x01000001
+#define SSAPI_ENABLE_L2_CACHE                             0x01000002
+#define SSAPI_DISABLE_L2_CACHE                            0x01000003
+#define SSAPI_WRITE_SCU_STATUS                            0x01000004
+#define SSAPI_WRITE_PWR_GATE                              0x01000005
+
+/* Broadcom Secure Service API Return Codes */
+#define SEC_ROM_RET_OK			0x00000001
+#define SEC_ROM_RET_FAIL		0x00000009
+
+#define SSAPI_RET_FROM_INT_SERV		0x4
+#define SEC_EXIT_NORMAL			0x1
+
+#define SSAPI_ROW_AES			0x0E000006
+#define SSAPI_BRCM_START_VC_CORE	0x0E000008
+
+#ifndef	__ASSEMBLY__
+extern void bcm_kona_smc_init(void);
+
+extern unsigned bcm_kona_smc(unsigned service_id,
+			     unsigned arg0,
+			     unsigned arg1,
+			     unsigned arg2,
+			     unsigned arg3);
+
+extern int bcm_kona_smc_asm(u32 service_id,
+			    u32 buffer_addr);
+
+#endif	/* __ASSEMBLY__ */
+
+#endif /* BCM_KONA_SMC_H */
diff --git a/arch/arm/mach-bcm/bcm_kona_smc_asm.S b/arch/arm/mach-bcm/bcm_kona_smc_asm.S
new file mode 100644
index 00000000000..a1608480d60
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_kona_smc_asm.S
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include "bcm_kona_smc.h"
+
+/*
+ * int bcm_kona_smc_asm(u32 service_id, u32 buffer_addr)
+ */
+
+ENTRY(bcm_kona_smc_asm)
+	stmfd	sp!, {r4-r12, lr}
+	mov	r4, r0		@ service_id
+	mov	r5, #3		@ Keep IRQ and FIQ off in SM
+	/*
+	 * Since interrupts are disabled in the open mode, we must keep
+	 * interrupts disabled in secure mode by setting R5=0x3. If interrupts
+	 * are enabled in open mode, we can set R5=0x0 to allow interrupts in
+	 * secure mode.  If we did this, the secure monitor would return back
+	 * control to the open mode to handle the interrupt prior to completing
+	 * the secure service. If this happened, R12 would not be
+	 * SEC_EXIT_NORMAL and we would need to call SMC again after resetting
+	 * R5 (it gets clobbered by the secure monitor) and setting R4 to
+	 * SSAPI_RET_FROM_INT_SERV to indicate that we want the secure monitor
+	 * to finish up the previous uncompleted secure service.
+	 */
+	mov	r6, r1		@ buffer_addr
+	smc	#0
+	/* Check r12 for SEC_EXIT_NORMAL here if interrupts are enabled */
+	ldmfd	sp!, {r4-r12, pc}
+ENDPROC(bcm_kona_smc_asm)
diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c
index 25959354047..22e8421b1df 100644
--- a/arch/arm/mach-bcm/board_bcm.c
+++ b/arch/arm/mach-bcm/board_bcm.c
@@ -20,12 +20,35 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
 
 
+#include "bcm_kona_smc.h"
+
+static int __init kona_l2_cache_init(void)
+{
+	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
+		return 0;
+
+	bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
+
+	/*
+	 * The aux_val and aux_mask have no effect since L2 cache is already
+	 * enabled.  Pass 0s for aux_val and 1s for aux_mask for default value.
+	 */
+	l2x0_of_init(0, ~0);
+
+	return 0;
+}
+
 static void __init board_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL,
 		&platform_bus);
+
+	bcm_kona_smc_init();
+
+	kona_l2_cache_init();
 }
 
 static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index d2f6b362b6d..b09b027178f 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -24,6 +24,12 @@ obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos-smc.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= firmware.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
+
 # machine support
 
 obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index b35c60059bb..46089fe2470 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -233,6 +233,33 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
 	},
 };
 
+static struct map_desc exynos4210_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
+		.pfn		= __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4x12_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
+		.pfn		= __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos5250_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM_NS,
+		.pfn		= __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static struct map_desc exynos5_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S3C_VA_SYS,
@@ -361,6 +388,11 @@ static void __init exynos4_map_io(void)
 	else
 		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
 
+	if (soc_is_exynos4210())
+		iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
+	if (soc_is_exynos4212() || soc_is_exynos4412())
+		iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
+
 	/* initialize device information early */
 	exynos4_default_sdhci0();
 	exynos4_default_sdhci1();
@@ -393,6 +425,9 @@ static void __init exynos4_map_io(void)
 static void __init exynos5_map_io(void)
 {
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+
+	if (soc_is_exynos5250())
+		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
 static void __init exynos5440_map_io(void)
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index cb89ab88695..b17448c1a16 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -30,6 +30,8 @@ void exynos_init_late(void);
 void exynos4_clk_init(struct device_node *np);
 void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
 
+void exynos_firmware_init(void);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else
diff --git a/arch/arm/mach-exynos/exynos-smc.S b/arch/arm/mach-exynos/exynos-smc.S
new file mode 100644
index 00000000000..2e27aa3813f
--- /dev/null
+++ b/arch/arm/mach-exynos/exynos-smc.S
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics.
+ *
+ * Copied from omap-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * Function signature: void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3)
+ */
+
+ENTRY(exynos_smc)
+	stmfd	sp!, {r4-r11, lr}
+	dsb
+	smc	#0
+	ldmfd	sp!, {r4-r11, pc}
+ENDPROC(exynos_smc)
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
new file mode 100644
index 00000000000..ed11f100d47
--- /dev/null
+++ b/arch/arm/mach-exynos/firmware.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/firmware.h>
+
+#include <mach/map.h>
+
+#include "smc.h"
+
+static int exynos_do_idle(void)
+{
+	exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+	return 0;
+}
+
+static int exynos_cpu_boot(int cpu)
+{
+	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
+	return 0;
+}
+
+static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
+{
+	void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+
+	__raw_writel(boot_addr, boot_reg);
+	return 0;
+}
+
+static const struct firmware_ops exynos_firmware_ops = {
+	.do_idle		= exynos_do_idle,
+	.set_cpu_boot_addr	= exynos_set_cpu_boot_addr,
+	.cpu_boot		= exynos_cpu_boot,
+};
+
+void __init exynos_firmware_init(void)
+{
+	if (of_have_populated_dt()) {
+		struct device_node *nd;
+		const __be32 *addr;
+
+		nd = of_find_compatible_node(NULL, NULL,
+						"samsung,secure-firmware");
+		if (!nd)
+			return;
+
+		addr = of_get_address(nd, 0, NULL, NULL);
+		if (!addr) {
+			pr_err("%s: No address specified.\n", __func__);
+			return;
+		}
+	}
+
+	pr_info("Running under secure firmware.\n");
+
+	register_firmware_ops(&exynos_firmware_ops);
+}
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 7f99b7b187d..99e0a79f3b1 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -26,6 +26,9 @@
 #define EXYNOS4_PA_SYSRAM0		0x02025000
 #define EXYNOS4_PA_SYSRAM1		0x02020000
 #define EXYNOS5_PA_SYSRAM		0x02020000
+#define EXYNOS4210_PA_SYSRAM_NS		0x0203F000
+#define EXYNOS4x12_PA_SYSRAM_NS		0x0204F000
+#define EXYNOS5250_PA_SYSRAM_NS		0x0204F000
 
 #define EXYNOS4_PA_FIMC0		0x11800000
 #define EXYNOS4_PA_FIMC1		0x11810000
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index ac27f3cd121..b9ed834a7ee 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -57,6 +57,7 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.smp		= smp_ops(exynos_smp_ops),
 	.init_irq	= exynos4_init_irq,
 	.map_io		= exynos4_dt_map_io,
+	.init_early	= exynos_firmware_init,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.init_time	= exynos_init_time,
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 95e04bd5813..a0e8ff7758a 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -24,6 +24,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+#include <asm/firmware.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -137,10 +138,21 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
+		unsigned long boot_addr;
+
 		smp_rmb();
 
-		__raw_writel(virt_to_phys(exynos4_secondary_startup),
-							cpu_boot_reg(phys_cpu));
+		boot_addr = virt_to_phys(exynos4_secondary_startup);
+
+		/*
+		 * Try to set boot address using firmware first
+		 * and fall back to boot register if it fails.
+		 */
+		if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+
+		call_firmware_op(cpu_boot, phys_cpu);
+
 		arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 		if (pen_release == -1)
@@ -196,10 +208,20 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 	 * system-wide flags register. The boot monitor waits
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
+	 *
+	 * Try using firmware operation first and fall back to
+	 * boot register if it fails.
 	 */
-	for (i = 1; i < max_cpus; ++i)
-		__raw_writel(virt_to_phys(exynos4_secondary_startup),
-					cpu_boot_reg(cpu_logical_map(i)));
+	for (i = 1; i < max_cpus; ++i) {
+		unsigned long phys_cpu;
+		unsigned long boot_addr;
+
+		phys_cpu = cpu_logical_map(i);
+		boot_addr = virt_to_phys(exynos4_secondary_startup);
+
+		if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
+			__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
+	}
 }
 
 struct smp_operations exynos_smp_ops __initdata = {
diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h
new file mode 100644
index 00000000000..13a1dc8ecbf
--- /dev/null
+++ b/arch/arm/mach-exynos/smc.h
@@ -0,0 +1,31 @@
+/*
+ *  Copyright (c) 2012 Samsung Electronics.
+ *
+ * EXYNOS - SMC Call
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_EXYNOS_SMC_H
+#define __ASM_ARCH_EXYNOS_SMC_H
+
+#define SMC_CMD_INIT		(-1)
+#define SMC_CMD_INFO		(-2)
+/* For Power Management */
+#define SMC_CMD_SLEEP		(-3)
+#define SMC_CMD_CPU1BOOT	(-4)
+#define SMC_CMD_CPU0AFTR	(-5)
+/* For CP15 Access */
+#define SMC_CMD_C15RESUME	(-11)
+/* For L2 Cache Access */
+#define SMC_CMD_L2X0CTRL	(-21)
+#define SMC_CMD_L2X0SETUP1	(-22)
+#define SMC_CMD_L2X0SETUP2	(-23)
+#define SMC_CMD_L2X0INVALL	(-24)
+#define SMC_CMD_L2X0DEBUG	(-25)
+
+extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3);
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index c2d7bdae589..c18678610bc 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -22,6 +22,7 @@
 #define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
 
 #define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
+#define S5P_VA_SYSRAM_NS	S3C_ADDR(0x02410000)
 #define S5P_VA_DMC0		S3C_ADDR(0x02440000)
 #define S5P_VA_DMC1		S3C_ADDR(0x02480000)
 #define S5P_VA_SROMC		S3C_ADDR(0x024C0000)