Merge branch 'cleanup-part-2' into devel-board

Conflicts:
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-rx51-peripherals.c

24 files changed, 492 insertions, 989 deletions

diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index d9af9811ded..ab7395d84bc 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id)
 	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
 	 * are DSP public peripherals.
 	 */
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+	if (id == 0 || id == 2) {
 		if (dsp_use++ == 0) {
 			api_clk = clk_get(NULL, "api_ck");
 			dsp_clk = clk_get(NULL, "dsp_ck");
@@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id)
 
 static void omap1_mcbsp_free(unsigned int id)
 {
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+	if (id == 0 || id == 2) {
 		if (--dsp_use == 0) {
 			if (!IS_ERR(api_clk)) {
 				clk_disable(api_clk);
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index adbe82d72d4..ff1466fbf5c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -269,4 +269,4 @@ obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 disp-$(CONFIG_OMAP2_DSS)		:= display.o
 obj-y					+= $(disp-m) $(disp-y)
 
-obj-y					+= common-board-devices.o
+obj-y					+= common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 12fae21346c..bd600cfb7f8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
 	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
 }
 
-static int sdp3430_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
-8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
-5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
-4040,   3910,   3790,   3670,   3550
-};
-
-static struct twl4030_bci_platform_data sdp3430_bci_data = {
-	.battery_tmp_tbl	= sdp3430_batt_table,
-	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 	.setup		= sdp3430_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data sdp3430_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_madc_platform_data sdp3430_madc_data = {
-	.irq_line	= 1,
-};
-
 /* regulator consumer mappings */
 
 /* ads7846 on SPI */
@@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
 	REGULATOR_SUPPLY("vcc", "spi1.0"),
 };
 
-static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = {
 	.consumer_supplies	= sdp3430_vsim_supplies,
 };
 
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data sdp3430_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vdda_dac_supplies),
-	.consumer_supplies	= sdp3430_vdda_dac_supplies,
-};
-
-static struct regulator_init_data sdp3430_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vpll2_supplies),
-	.consumer_supplies	= sdp3430_vpll2_supplies,
-};
-
-static struct twl4030_codec_audio_data sdp3430_audio;
-
-static struct twl4030_codec_data sdp3430_codec = {
-	.audio_mclk = 26000000,
-	.audio = &sdp3430_audio,
-};
-
 static struct twl4030_platform_data sdp3430_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.bci		= &sdp3430_bci_data,
 	.gpio		= &sdp3430_gpio_data,
-	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
-	.usb		= &sdp3430_usb_data,
-	.codec		= &sdp3430_codec,
 
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.vmmc1		= &sdp3430_vmmc1,
 	.vmmc2		= &sdp3430_vmmc2,
 	.vsim		= &sdp3430_vsim,
-	.vdac		= &sdp3430_vdac,
-	.vpll2		= &sdp3430_vpll2,
 };
 
 static int __init omap3430_i2c_init(void)
 {
 	/* i2c1 for PMIC only */
+	omap3_pmic_get_config(&sdp3430_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	sdp3430_twldata.vdac->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("twl4030", &sdp3430_twldata);
+
 	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/* i2c3 on display connector (for DVI, tfp410) */
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index f6efff5f165..a7c0b31fd08 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -372,14 +372,6 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct twl4030_usb_data omap4_usbphy_data = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 2,
@@ -411,10 +403,6 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
 static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
 	.supply = "vmmc",
 	.dev_name = "omap_hsmmc.4",
@@ -504,61 +492,6 @@ static struct regulator_init_data sdp4430_vaux1 = {
 	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
-static struct regulator_init_data sdp4430_vaux2 = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vaux3 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data sdp4430_vmmc = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = sdp4430_vmmc_supply,
-};
-
-static struct regulator_init_data sdp4430_vpp = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct regulator_init_data sdp4430_vusim = {
 	.constraints = {
 		.min_uV			= 1200000,
@@ -572,75 +505,10 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
 
-static struct regulator_init_data sdp4430_vana = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vcxio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_vusb = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data sdp4430_clk32kg = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-		.always_on		= true,
-	},
-};
-
 static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-
 	/* Regulators */
-	.vmmc		= &sdp4430_vmmc,
-	.vpp		= &sdp4430_vpp,
 	.vusim		= &sdp4430_vusim,
-	.vana		= &sdp4430_vana,
-	.vcxio		= &sdp4430_vcxio,
-	.vdac		= &sdp4430_vdac,
-	.vusb		= &sdp4430_vusb,
 	.vaux1		= &sdp4430_vaux1,
-	.vaux2		= &sdp4430_vaux2,
-	.vaux3		= &sdp4430_vaux3,
-	.clk32kg	= &sdp4430_clk32kg,
-	.usb		= &omap4_usbphy_data
 };
 
 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
@@ -658,6 +526,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 };
 static int __init omap4_i2c_init(void)
 {
+	omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &sdp4430_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index fcd403224f9..3af8aab435b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -339,10 +339,6 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
 	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 
-static struct regulator_consumer_supply cm_t35_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
 static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
 	REGULATOR_SUPPLY("vdvi", "omapdss"),
 };
@@ -377,39 +373,6 @@ static struct regulator_init_data cm_t35_vsim = {
 	.consumer_supplies	= cm_t35_vsim_supply,
 };
 
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data cm_t35_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vdac_supply),
-	.consumer_supplies	= cm_t35_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data cm_t35_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vdvi_supply),
-	.consumer_supplies	= cm_t35_vdvi_supply,
-};
-
-static struct twl4030_usb_data cm_t35_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static uint32_t cm_t35_keymap[] = {
 	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
 	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
@@ -488,21 +451,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
 };
 
 static struct twl4030_platform_data cm_t35_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.keypad		= &cm_t35_kp_data,
-	.usb		= &cm_t35_usb_data,
 	.gpio		= &cm_t35_gpio_data,
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
-	.vdac		= &cm_t35_vdac,
-	.vpll2		= &cm_t35_vpll2,
 };
 
 static void __init cm_t35_init_i2c(void)
 {
+	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	cm_t35_twldata.vpll2->constraints.name = "VDVI";
+	cm_t35_twldata.vpll2->num_consumer_supplies =
+						ARRAY_SIZE(cm_t35_vdvi_supply);
+	cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
+
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
 }
 
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 949dbeabab2..b6002ec31c6 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -186,10 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 	.default_device = &devkit8000_lcd_device,
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
@@ -289,20 +285,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 	.consumer_supplies	= devkit8000_vmmc1_supply,
 };
 
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vdda_dac_supply),
-	.consumer_supplies	= devkit8000_vdda_dac_supply,
-};
-
 /* VPLL1 for digital video outputs */
 static struct regulator_init_data devkit8000_vpll1 = {
 	.constraints = {
@@ -332,27 +314,10 @@ static struct regulator_init_data devkit8000_vio = {
 	.consumer_supplies      = devkit8000_vio_supply,
 };
 
-static struct twl4030_usb_data devkit8000_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data devkit8000_audio_data;
-
-static struct twl4030_codec_data devkit8000_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &devkit8000_audio_data,
-};
-
 static struct twl4030_platform_data devkit8000_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &devkit8000_usb_data,
 	.gpio		= &devkit8000_gpio_data,
-	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vdac		= &devkit8000_vdac,
 	.vpll1		= &devkit8000_vpll1,
 	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
@@ -360,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = {
 
 static int __init devkit8000_i2c_init(void)
 {
+	omap3_pmic_get_config(&devkit8000_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			  TWL_COMMON_REGULATOR_VDAC);
 	omap3_pmic_init("tps65930", &devkit8000_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index f683835f936..35be778caf1 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -443,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data igep_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static int igep2_enable_dvi(struct omap_dss_device *dssdev)
 {
 	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
@@ -483,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data igep2_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep2_vpll2_supplies),
-	.consumer_supplies	= igep2_vpll2_supplies,
-};
-
 static void __init igep2_display_init(void)
 {
 	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
@@ -522,13 +498,6 @@ static void __init igep_init_early(void)
 				  m65kxxxxam_sdrc_params);
 }
 
-static struct twl4030_codec_audio_data igep2_audio_data;
-
-static struct twl4030_codec_data igep2_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &igep2_audio_data,
-};
-
 static int igep2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -561,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
 };
 
 static struct twl4030_platform_data igep_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &igep_usb_data,
 	.gpio		= &igep_twl4030_gpio_pdata,
 	.vmmc1          = &igep_vmmc1,
 	.vio		= &igep_vio,
@@ -581,6 +546,8 @@ static void __init igep_i2c_init(void)
 {
 	int ret;
 
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+
 	if (machine_is_igep0020()) {
 		/*
 		 * Bus 3 is attached to the DVI port where devices like the
@@ -591,9 +558,12 @@ static void __init igep_i2c_init(void)
 		if (ret)
 			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
 
-		igep_twldata.codec	= &igep2_codec_data;
 		igep_twldata.keypad	= &igep2_keypad_pdata;
-		igep_twldata.vpll2	= &igep2_vpll2;
+		/* Get common pmic data */
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
+				      TWL_COMMON_REGULATOR_VPLL2);
+		igep_twldata.vpll2->constraints.apply_uV = true;
+		igep_twldata.vpll2->constraints.name = "VDVI";
 	}
 
 	omap3_pmic_init("twl4030", &igep_twldata);
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 5d4328f19c0..218764c9377 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -199,20 +199,12 @@ static void __init omap_ldp_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
 
-static struct twl4030_usb_data ldp_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
-static struct twl4030_madc_platform_data ldp_madc_data = {
-	.irq_line	= 1,
-};
-
 static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
 };
 
 static struct twl4030_platform_data ldp_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.madc		= &ldp_madc_data,
-	.usb		= &ldp_usb_data,
 	.vmmc1		= &ldp_vmmc1,
 	.vaux1		= &ldp_vaux1,
 	.gpio		= &ldp_gpio_data,
@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
 
 static int __init omap_i2c_init(void)
 {
+	omap3_pmic_get_config(&ldp_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
 	omap3_pmic_init("twl4030", &ldp_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 78cf5f221f8..32f5f895568 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -236,15 +236,6 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
 
-static struct regulator_consumer_supply beagle_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
 static void __init beagle_display_init(void)
 {
 	int r;
@@ -371,58 +362,11 @@ static struct regulator_init_data beagle_vsim = {
 	.consumer_supplies	= beagle_vsim_supply,
 };
 
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdac_supply),
-	.consumer_supplies	= beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdvi_supplies),
-	.consumer_supplies	= beagle_vdvi_supplies,
-};
-
-static struct twl4030_usb_data beagle_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data beagle_audio_data;
-
-static struct twl4030_codec_data beagle_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &beagle_audio_data,
-};
-
 static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
-	.codec		= &beagle_codec_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
-	.vdac		= &beagle_vdac,
-	.vpll2		= &beagle_vpll2,
 };
 
 static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
@@ -433,6 +377,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
 
 static int __init omap3_beagle_i2c_init(void)
 {
+	omap3_pmic_get_config(&beagle_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	beagle_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("twl4030", &beagle_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 57bce0f2e19..c452b3f3331 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -396,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
 	.setup		= omap3evm_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data omap3evm_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
@@ -434,56 +430,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_madc_platform_data omap3evm_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data omap3evm_audio_data;
-
-static struct twl4030_codec_data omap3evm_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &omap3evm_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_evm_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vdda_dac_supply),
-	.consumer_supplies	= omap3_evm_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_evm_vpll2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vpll2_supplies),
-	.consumer_supplies	= omap3_evm_vpll2_supplies,
-};
-
 /* ads7846 on SPI */
 static struct regulator_consumer_supply omap3evm_vio_supply[] = {
 	REGULATOR_SUPPLY("vcc", "spi1.0"),
@@ -547,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
 #endif
 
 static struct twl4030_platform_data omap3evm_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.keypad		= &omap3evm_kp_data,
-	.madc		= &omap3evm_madc_data,
-	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
-	.codec		= &omap3evm_codec_data,
-	.vdac		= &omap3_evm_vdac,
-	.vpll2		= &omap3_evm_vpll2,
 	.vio		= &omap3evm_vio,
 	.vmmc1		= &omap3evm_vmmc1,
 	.vsim		= &omap3evm_vsim,
@@ -565,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = {
 
 static int __init omap3_evm_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3evm_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	omap3evm_twldata.vdac->constraints.apply_uV = true;
+	omap3evm_twldata.vpll2->constraints.apply_uV = true;
+
 	omap3_pmic_init("twl4030", &omap3evm_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index d4ea9408560..080d7bd6795 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -332,10 +332,6 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
 };
 
-static struct regulator_consumer_supply pandora_vdda_dac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
@@ -391,36 +387,6 @@ static struct regulator_init_data pandora_vmmc2 = {
 	.consumer_supplies	= pandora_vmmc2_supply,
 };
 
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data pandora_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdda_dac_supply),
-	.consumer_supplies	= pandora_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data pandora_vpll2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdds_supplies),
-	.consumer_supplies	= pandora_vdds_supplies,
-};
-
 /* VAUX1 for LCD */
 static struct regulator_init_data pandora_vaux1 = {
 	.constraints = {
@@ -508,29 +474,12 @@ static struct platform_device pandora_vwlan_device = {
 	},
 };
 
-static struct twl4030_usb_data omap3pandora_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data omap3pandora_audio_data;
-
-static struct twl4030_codec_data omap3pandora_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &omap3pandora_audio_data,
-};
-
 static struct twl4030_bci_platform_data pandora_bci_data;
 
 static struct twl4030_platform_data omap3pandora_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
-	.usb		= &omap3pandora_usb_data,
-	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
-	.vdac		= &pandora_vdac,
-	.vpll2		= &pandora_vpll2,
 	.vaux1		= &pandora_vaux1,
 	.vaux2		= &pandora_vaux2,
 	.vaux4		= &pandora_vaux4,
@@ -548,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
 
 static int __init omap3pandora_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3pandora_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	omap3pandora_twldata.vdac->constraints.apply_uV = true;
+
+	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
+	omap3pandora_twldata.vpll2->num_consumer_supplies =
+					ARRAY_SIZE(pandora_vdds_supplies);
+	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
+
 	omap3_pmic_init("tps65950", &omap3pandora_twldata);
 	/* i2c2 pins are not connected */
 	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index b8ad4dd5bbb..8e104980ea2 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -349,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
 	.setup		= omap3stalker_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data omap3stalker_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
@@ -387,69 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_madc_platform_data omap3stalker_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data omap3stalker_audio_data;
-
-static struct twl4030_codec_data omap3stalker_codec_data = {
-	.audio_mclk	= 26000000,
-	.audio		= &omap3stalker_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_stalker_vdac = {
-	.constraints		= {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-		| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vdda_dac_supply),
-	.consumer_supplies	= omap3_stalker_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_stalker_vpll2 = {
-	.constraints		= {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV = true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-		| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vpll2_supplies),
-	.consumer_supplies	= omap3_stalker_vpll2_supplies,
-};
-
 static struct twl4030_platform_data omap3stalker_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.keypad		= &omap3stalker_kp_data,
-	.madc		= &omap3stalker_madc_data,
-	.usb		= &omap3stalker_usb_data,
 	.gpio		= &omap3stalker_gpio_data,
-	.codec		= &omap3stalker_codec_data,
-	.vdac		= &omap3_stalker_vdac,
-	.vpll2		= &omap3_stalker_vpll2,
 	.vmmc1		= &omap3stalker_vmmc1,
 	.vsim		= &omap3stalker_vsim,
 };
@@ -470,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
 
 static int __init omap3_stalker_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3stalker_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	omap3stalker_twldata.vdac->constraints.apply_uV = true;
+	omap3stalker_twldata.vpll2->constraints.apply_uV = true;
+	omap3stalker_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("twl4030", &omap3stalker_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 57e6ed34ebb..852ea046405 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -206,58 +206,11 @@ static struct regulator_init_data touchbook_vsim = {
 	.consumer_supplies	= touchbook_vsim_supply,
 };
 
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data touchbook_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vdac_supply),
-	.consumer_supplies	= touchbook_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data touchbook_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vdvi_supply),
-	.consumer_supplies	= touchbook_vdvi_supply,
-};
-
-static struct twl4030_usb_data touchbook_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data touchbook_audio_data;
-
-static struct twl4030_codec_data touchbook_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &touchbook_audio_data,
-};
-
 static struct twl4030_platform_data touchbook_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.usb		= &touchbook_usb_data,
 	.gpio		= &touchbook_gpio_data,
-	.codec		= &touchbook_codec_data,
 	.vmmc1		= &touchbook_vmmc1,
 	.vsim		= &touchbook_vsim,
-	.vdac		= &touchbook_vdac,
-	.vpll2		= &touchbook_vpll2,
 };
 
 static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
@@ -269,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
 static int __init omap3_touchbook_i2c_init(void)
 {
 	/* Standard TouchBook bus */
-	omap3_pmic_init("twl4030", &touchbook_twldata);
+	omap3_pmic_get_config(&touchbook_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
 
+	touchbook_twldata.vdac->num_consumer_supplies =
+					ARRAY_SIZE(touchbook_vdac_supply);
+	touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
+
+	touchbook_twldata.vpll2->constraints.name = "VDVI";
+	touchbook_twldata.vpll2->num_consumer_supplies =
+					ARRAY_SIZE(touchbook_vdvi_supply);
+	touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
+
+	omap3_pmic_init("twl4030", &touchbook_twldata);
 	/* Additional TouchBook bus */
 	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
 			ARRAY_SIZE(touchBook_i2c_boardinfo));
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index ee2034e3746..9aaa9605766 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -154,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static struct twl4030_usb_data omap4_usbphy_data = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -181,10 +173,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
 static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
 };
@@ -269,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct regulator_init_data omap4_panda_vaux2 = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vaux3 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_panda_vmmc = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(omap4_panda_vmmc_supply),
-	.consumer_supplies      = omap4_panda_vmmc_supply,
-};
-
-static struct regulator_init_data omap4_panda_vpp = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vana = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vcxio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_vusb = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_panda_clk32kg = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-
-	/* Regulators */
-	.vmmc		= &omap4_panda_vmmc,
-	.vpp		= &omap4_panda_vpp,
-	.vana		= &omap4_panda_vana,
-	.vcxio		= &omap4_panda_vcxio,
-	.vdac		= &omap4_panda_vdac,
-	.vusb		= &omap4_panda_vusb,
-	.vaux2		= &omap4_panda_vaux2,
-	.vaux3		= &omap4_panda_vaux3,
-	.clk32kg	= &omap4_panda_clk32kg,
-	.usb		= &omap4_usbphy_data,
-};
+/* Panda board uses the common PMIC configuration */
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -404,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
 
 static int __init omap4_panda_i2c_init(void)
 {
+	omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9883313bc07..f949a9954d7 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -265,15 +265,6 @@ static struct omap_dss_board_info overo_dss_data = {
 	.default_device	= &overo_dvi_device,
 };
 
-static struct regulator_consumer_supply overo_vdda_dac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.setup		= overo_twl_gpio_setup,
 };
 
-static struct twl4030_usb_data overo_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static struct regulator_init_data overo_vmmc1 = {
 	.constraints = {
 		.min_uV			= 1850000,
@@ -451,55 +438,19 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= overo_vmmc1_supply,
 };
 
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data overo_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vdda_dac_supply),
-	.consumer_supplies	= overo_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data overo_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vdds_dsi_supply),
-	.consumer_supplies	= overo_vdds_dsi_supply,
-};
-
-static struct twl4030_codec_audio_data overo_audio_data;
-
-static struct twl4030_codec_data overo_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &overo_audio_data,
-};
-
 static struct twl4030_platform_data overo_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
-	.usb		= &overo_usb_data,
-	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
-	.vdac		= &overo_vdac,
-	.vpll2		= &overo_vpll2,
 };
 
 static int __init overo_i2c_init(void)
 {
+	omap3_pmic_get_config(&overo_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+	overo_twldata.vpll2->constraints.name = "VDVI";
+
 	omap3_pmic_init("tps65950", &overo_twldata);
 	/* i2c2 pins are used for gpio */
 	omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 54dceb16341..7dfed24ee12 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
 
-static struct twl4030_usb_data rm680_usb_data = {
-	.usb_mode		= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_platform_data rm680_twl_data = {
-	.irq_base		= TWL4030_IRQ_BASE,
-	.irq_end		= TWL4030_IRQ_END,
 	.gpio			= &rm680_gpio_data,
-	.usb			= &rm680_usb_data,
 	/* add rest of the children here */
 };
 
 static void __init rm680_i2c_init(void)
 {
+	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
 	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 7d377542517..8946d7232f3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -348,10 +348,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_madc_platform_data rx51_madc_data = {
-	.irq_line		= 1,
-};
-
 /* Enable input logic and pull all lines up when eMMC is on. */
 static struct omap_board_mux rx51_mmc2_on_mux[] = {
 	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
@@ -458,10 +454,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 	REGULATOR_SUPPLY("vdd", "2-0063"),
 };
 
-static struct regulator_consumer_supply rx51_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -604,21 +596,6 @@ static struct regulator_init_data rx51_vsim = {
 	.consumer_supplies	= rx51_vsim_supply,
 };
 
-static struct regulator_init_data rx51_vdac = {
-	.constraints = {
-		.name			= "VDAC",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vdac_supply),
-	.consumer_supplies	= rx51_vdac_supply,
-};
-
 static struct regulator_init_data rx51_vio = {
 	.constraints = {
 		.min_uV			= 1800000,
@@ -726,10 +703,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
 
-static struct twl4030_usb_data rx51_usb_data = {
-	.usb_mode		= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_ins sleep_on_seq[] __initdata = {
 /*
  * Turn off everything
@@ -901,14 +874,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = {
 };
 
 static struct twl4030_platform_data rx51_twldata __initdata = {
-	.irq_base		= TWL4030_IRQ_BASE,
-	.irq_end		= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
-	.madc			= &rx51_madc_data,
-	.usb			= &rx51_usb_data,
 	.power			= &rx51_t2scripts_data,
 	.codec			= &rx51_codec_data,
 
@@ -919,7 +887,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vpll1			= &rx51_vpll1,
 	.vpll2			= &rx51_vpll2,
 	.vsim			= &rx51_vsim,
-	.vdac			= &rx51_vdac,
 	.vintana1		= &rx51_vintana1,
 	.vintana2		= &rx51_vintana2,
 	.vintdig		= &rx51_vintdig,
@@ -984,6 +951,13 @@ static int __init rx51_i2c_init(void)
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
 	}
 	rx51_twldata.vmmc2 = &rx51_vmmc2;
+	omap3_pmic_get_config(&rx51_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
+			TWL_COMMON_REGULATOR_VDAC);
+
+	rx51_twldata.vdac->constraints.apply_uV = true;
+	rx51_twldata.vdac->constraints.name = "VDAC";
+
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 8495f82fcba..13a64423366 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -226,41 +226,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
 
-static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_consumer_supply zoom_vdda_dac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-static struct regulator_init_data zoom_vpll2 = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(zoom_vpll2_supplies),
-	.consumer_supplies		= zoom_vpll2_supplies,
-};
-
-static struct regulator_init_data zoom_vdac = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(zoom_vdda_dac_supply),
-	.consumer_supplies		= zoom_vdda_dac_supply,
-};
-
 static int zoom_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -285,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute)
 	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
 }
 
-static int zoom_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom_bci_data = {
-	.battery_tmp_tbl	= zoom_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom_batt_table),
-};
-
-static struct twl4030_usb_data zoom_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -312,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.setup		= zoom_twl_gpio_setup,
 };
 
-static struct twl4030_madc_platform_data zoom_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data zoom_audio_data;
-
-static struct twl4030_codec_data zoom_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &zoom_audio_data,
-};
-
 static struct twl4030_platform_data zoom_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
 	/* platform_data for children goes here */
-	.bci		= &zoom_bci_data,
-	.madc		= &zoom_madc_data,
-	.usb		= &zoom_usb_data,
 	.gpio		= &zoom_gpio_data,
 	.keypad		= &zoom_kp_twl4030_data,
-	.codec		= &zoom_codec_data,
 	.vmmc1          = &zoom_vmmc1,
 	.vmmc2          = &zoom_vmmc2,
 	.vsim           = &zoom_vsim,
-	.vpll2		= &zoom_vpll2,
-	.vdac		= &zoom_vdac,
 };
 
 static int __init omap_i2c_init(void)
 {
+	omap3_pmic_get_config(&zoom_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
 	if (machine_is_omap_zoom2()) {
-		zoom_audio_data.ramp_delay_value = 3;	/* 161 ms */
-		zoom_audio_data.hs_extmute = 1;
-		zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+		struct twl4030_codec_audio_data *audio_data;
+		audio_data = zoom_twldata.codec->audio;
+
+		audio_data->ramp_delay_value = 3;	/* 161 ms */
+		audio_data->hs_extmute = 1;
+		audio_data->set_hs_extmute = zoom2_set_hs_extmute;
 	}
 	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 0043fa8e370..bcb0c581716 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -20,36 +20,15 @@
  *
  */
 
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <plat/i2c.h>
 #include <plat/mcspi.h>
 #include <plat/nand.h>
 
 #include "common-board-devices.h"
 
-static struct i2c_board_info __initdata pmic_i2c_board_info = {
-	.addr		= 0x48,
-	.flags		= I2C_CLIENT_WAKE,
-};
-
-void __init omap_pmic_init(int bus, u32 clkrate,
-			   const char *pmic_type, int pmic_irq,
-			   struct twl4030_platform_data *pmic_data)
-{
-	strncpy(pmic_i2c_board_info.type, pmic_type,
-		sizeof(pmic_i2c_board_info.type));
-	pmic_i2c_board_info.irq = pmic_irq;
-	pmic_i2c_board_info.platform_data = pmic_data;
-
-	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
-}
-
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 679719051df..a0b4a42836a 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -1,33 +1,11 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
+#include "twl-common.h"
+
 #define NAND_BLOCK_SIZE	SZ_128K
 
-struct twl4030_platform_data;
 struct mtd_partition;
-
-void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
-		    struct twl4030_platform_data *pmic_data);
-
-static inline void omap2_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap3_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap4_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
-	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
-
 struct ads7846_platform_data;
 
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
new file mode 100644
index 00000000000..3aaa46f6cd1
--- /dev/null
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -0,0 +1,304 @@
+/*
+ * twl-common.c
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc..
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/twl.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+
+#include <plat/i2c.h>
+#include <plat/usb.h>
+
+#include "twl-common.h"
+
+static struct i2c_board_info __initdata pmic_i2c_board_info = {
+	.addr		= 0x48,
+	.flags		= I2C_CLIENT_WAKE,
+};
+
+void __init omap_pmic_init(int bus, u32 clkrate,
+			   const char *pmic_type, int pmic_irq,
+			   struct twl4030_platform_data *pmic_data)
+{
+	strncpy(pmic_i2c_board_info.type, pmic_type,
+		sizeof(pmic_i2c_board_info.type));
+	pmic_i2c_board_info.irq = pmic_irq;
+	pmic_i2c_board_info.platform_data = pmic_data;
+
+	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
+}
+
+static struct twl4030_usb_data omap4_usb_pdata = {
+	.phy_init	= omap4430_phy_init,
+	.phy_exit	= omap4430_phy_exit,
+	.phy_power	= omap4430_phy_power,
+	.phy_set_clock	= omap4430_phy_set_clk,
+	.phy_suspend	= omap4430_phy_suspend,
+};
+
+static struct twl4030_usb_data omap3_usb_pdata = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int omap3_batt_table[] = {
+/* 0 C */
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data omap3_bci_pdata = {
+	.battery_tmp_tbl	= omap3_batt_table,
+	.tblsize		= ARRAY_SIZE(omap3_batt_table),
+};
+
+static struct twl4030_madc_platform_data omap3_madc_pdata = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_codec_audio_data omap3_audio;
+
+static struct twl4030_codec_data omap3_codec_pdata = {
+	.audio_mclk = 26000000,
+	.audio = &omap3_audio,
+};
+
+static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
+
+static struct regulator_init_data omap3_vdac_idata = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_vdda_dac_supplies),
+	.consumer_supplies	= omap3_vdda_dac_supplies,
+};
+
+static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
+static struct regulator_init_data omap3_vpll2_idata = {
+	.constraints = {
+		.min_uV                 = 1800000,
+		.max_uV                 = 1800000,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask         = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3_vpll2_supplies),
+	.consumer_supplies		= omap3_vpll2_supplies,
+};
+
+static struct regulator_init_data omap4_vdac_idata = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_vaux2_idata = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_vaux3_idata = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_consumer_supply omap4_vmmc_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data omap4_vmmc_idata = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(omap4_vmmc_supply),
+	.consumer_supplies      = omap4_vmmc_supply,
+};
+
+static struct regulator_init_data omap4_vpp_idata = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_vana_idata = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_vcxio_idata = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_vusb_idata = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_clk32kg_idata = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+};
+
+void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
+				  u32 pdata_flags, u32 regulators_flags)
+{
+	if (!pmic_data->irq_base)
+		pmic_data->irq_base = TWL6030_IRQ_BASE;
+	if (!pmic_data->irq_end)
+		pmic_data->irq_end = TWL6030_IRQ_END;
+
+	/* Common platform data configurations */
+	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+		pmic_data->usb = &omap4_usb_pdata;
+
+	/* Common regulator configurations */
+	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+		pmic_data->vdac = &omap4_vdac_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2)
+		pmic_data->vaux2 = &omap4_vaux2_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3)
+		pmic_data->vaux3 = &omap4_vaux3_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc)
+		pmic_data->vmmc = &omap4_vmmc_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp)
+		pmic_data->vpp = &omap4_vpp_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana)
+		pmic_data->vana = &omap4_vana_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio)
+		pmic_data->vcxio = &omap4_vcxio_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb)
+		pmic_data->vusb = &omap4_vusb_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
+	    !pmic_data->clk32kg)
+		pmic_data->clk32kg = &omap4_clk32kg_idata;
+}
+
+void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+				  u32 pdata_flags, u32 regulators_flags)
+{
+	if (!pmic_data->irq_base)
+		pmic_data->irq_base = TWL4030_IRQ_BASE;
+	if (!pmic_data->irq_end)
+		pmic_data->irq_end = TWL4030_IRQ_END;
+
+	/* Common platform data configurations */
+	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+		pmic_data->usb = &omap3_usb_pdata;
+
+	if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
+		pmic_data->bci = &omap3_bci_pdata;
+
+	if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
+		pmic_data->madc = &omap3_madc_pdata;
+
+	if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec)
+		pmic_data->codec = &omap3_codec_pdata;
+
+	/* Common regulator configurations */
+	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+		pmic_data->vdac = &omap3_vdac_idata;
+
+	if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
+		pmic_data->vpll2 = &omap3_vpll2_idata;
+}
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
new file mode 100644
index 00000000000..5e83a5bd37f
--- /dev/null
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -0,0 +1,59 @@
+#ifndef __OMAP_PMIC_COMMON__
+#define __OMAP_PMIC_COMMON__
+
+#define TWL_COMMON_PDATA_USB		(1 << 0)
+#define TWL_COMMON_PDATA_BCI		(1 << 1)
+#define TWL_COMMON_PDATA_MADC		(1 << 2)
+#define TWL_COMMON_PDATA_AUDIO		(1 << 3)
+
+/* Common LDO regulators for TWL4030/TWL6030 */
+#define TWL_COMMON_REGULATOR_VDAC	(1 << 0)
+#define TWL_COMMON_REGULATOR_VAUX1	(1 << 1)
+#define TWL_COMMON_REGULATOR_VAUX2	(1 << 2)
+#define TWL_COMMON_REGULATOR_VAUX3	(1 << 3)
+
+/* TWL6030 LDO regulators */
+#define TWL_COMMON_REGULATOR_VMMC	(1 << 4)
+#define TWL_COMMON_REGULATOR_VPP	(1 << 5)
+#define TWL_COMMON_REGULATOR_VUSIM	(1 << 6)
+#define TWL_COMMON_REGULATOR_VANA	(1 << 7)
+#define TWL_COMMON_REGULATOR_VCXIO	(1 << 8)
+#define TWL_COMMON_REGULATOR_VUSB	(1 << 9)
+#define TWL_COMMON_REGULATOR_CLK32KG	(1 << 10)
+
+/* TWL4030 LDO regulators */
+#define TWL_COMMON_REGULATOR_VPLL1	(1 << 4)
+#define TWL_COMMON_REGULATOR_VPLL2	(1 << 5)
+
+
+struct twl4030_platform_data;
+
+void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
+		    struct twl4030_platform_data *pmic_data);
+
+static inline void omap2_pmic_init(const char *pmic_type,
+				   struct twl4030_platform_data *pmic_data)
+{
+	omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+}
+
+static inline void omap3_pmic_init(const char *pmic_type,
+				   struct twl4030_platform_data *pmic_data)
+{
+	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+}
+
+static inline void omap4_pmic_init(const char *pmic_type,
+				   struct twl4030_platform_data *pmic_data)
+{
+	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
+	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
+}
+
+void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+			   u32 pdata_flags, u32 regulators_flags);
+
+void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
+			   u32 pdata_flags, u32 regulators_flags);
+
+#endif /* __OMAP_PMIC_COMMON__ */
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 6c535083240..9882c657b2d 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -33,7 +33,7 @@
 #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr)		\
 static struct platform_device omap_mcbsp##port_nr = {	\
 	.name	= "omap-mcbsp-dai",			\
-	.id	= OMAP_MCBSP##port_nr,			\
+	.id	= port_nr - 1,			\
 }
 
 #define MCBSP_CONFIG_TYPE2	0x2
@@ -332,14 +332,6 @@ struct omap_mcbsp_reg_cfg {
 };
 
 typedef enum {
-	OMAP_MCBSP1 = 0,
-	OMAP_MCBSP2,
-	OMAP_MCBSP3,
-	OMAP_MCBSP4,
-	OMAP_MCBSP5
-} omap_mcbsp_id;
-
-typedef enum {
 	OMAP_MCBSP_WORD_8 = 0,
 	OMAP_MCBSP_WORD_12,
 	OMAP_MCBSP_WORD_16,
@@ -385,8 +377,6 @@ struct omap_mcbsp {
 	void __iomem *io_base;
 	u8 id;
 	u8 free;
-	omap_mcbsp_word_length rx_word_length;
-	omap_mcbsp_word_length tx_word_length;
 
 	int rx_irq;
 	int tx_irq;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 455eadcd820..3c1fbdc9246 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -869,9 +869,6 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	if (cpu_is_omap34xx())
 		omap_st_start(mcbsp);
 
-	mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
-	mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
-
 	/* Only enable SRG, if McBSP is master */
 	w = MCBSP_READ_CACHE(mcbsp, PCR0);
 	if (w & (FSXM | FSRM | CLKXM | CLKRM))