Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

118 files changed, 3835 insertions, 3630 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 77050671eee..09ab87ee6fe 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -233,8 +233,9 @@ config LANTIQ
 	select ARCH_REQUIRE_GPIOLIB
 	select SWAP_IO_SPACE
 	select BOOT_RAW
-	select HAVE_CLK
-	select MIPS_MACHINE
+	select HAVE_MACH_CLKDEV
+	select CLKDEV_LOOKUP
+	select USE_OF
 
 config LASAT
 	bool "LASAT Networks platforms"
@@ -1783,10 +1784,12 @@ endchoice
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
-	range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
-	default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
-	range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
-	default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB
+	default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB
+	range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB
+	default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB
+	range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB
+	default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB
 	range 11 64
 	default "11"
 	help
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index a83302b96c0..7dde01642d6 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index e0fae8f4442..f44feee2d67 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
 	  Say 'Y' here if you want your kernel to support the
 	  Atheros AP81 reference board.
 
+config ATH79_MACH_DB120
+	bool "Atheros DB120 reference board"
+	select SOC_AR934X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Atheros DB120 reference board.
+
 config ATH79_MACH_PB44
 	bool "Atheros PB44 reference board"
 	select SOC_AR71XX
@@ -52,12 +64,14 @@ endmenu
 config SOC_AR71XX
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select HW_HAS_PCI
 	def_bool n
 
 config SOC_AR724X
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
 	select HW_HAS_PCI
+	select PCI_AR724X if PCI
 	def_bool n
 
 config SOC_AR913X
@@ -68,6 +82,15 @@ config SOC_AR933X
 	select USB_ARCH_HAS_EHCI
 	def_bool n
 
+config SOC_AR934X
+	select USB_ARCH_HAS_EHCI
+	select HW_HAS_PCI
+	select PCI_AR724X if PCI
+	def_bool n
+
+config PCI_AR724X
+	def_bool n
+
 config ATH79_DEV_GPIO_BUTTONS
 	def_bool n
 
@@ -81,7 +104,7 @@ config ATH79_DEV_USB
 	def_bool n
 
 config ATH79_DEV_WMAC
-	depends on (SOC_AR913X || SOC_AR933X)
+	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)