Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific updates from Arnd Bergmann:
 "These changes are all for individual board files.  In the long run,
  those files will largely go away, and the amount of changes appears to
  be continuously decreasing, which is a good sign.  This time around,
  changes are focused on tegra, omap and samsung."

Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot}
as per the 'for-linus' branch.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: EXYNOS: Add leds status1 and status2 on Origen board
  ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
  ARM: EXYNOS: Add missing .reserve field to SMDKC210
  ARM: EXYNOS: Add DRM device to SMDK4X12 board
  ARM: S3C64XX: Clean up after SPI driver platform data updates
  ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
  ARM: EXYNOS: Add framebuffer support for SMDK4X12
  ARM: EXYNOS: Add HSOTG support to SMDK4X12
  ARM: S5PV210: Add audio platform device in Goni board
  ARM: S5PV210: Add audio platform device in Aquila board
  ARM: EXYNOS: Add audio platform device in SMDKV310 board
  ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
  ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
  ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
  ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
  ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
  ARM: omap3evm: enable VBUS switch for EHCI tranceiver
  ARM: OMAP3EVM: Adding USB internal LDOs board file
  ARM: OMAP3EVM: Add NAND flash definition
  ARM: OMAP3: cm-t35: add tvp5150 decoder support
  ...

35 files changed, 584 insertions, 681 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b1639621689..dc3de407ce0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -683,6 +683,7 @@ config ARCH_TEGRA
 	select MIGHT_HAVE_CACHE_L2X0
 	select NEED_MACH_IO_H if PCI
 	select ARCH_HAS_CPUFREQ
+	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6f6d13f91e4..b5b4c8c9db1 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -207,6 +207,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
@@ -326,6 +327,7 @@ config MACH_ORIGEN
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -360,22 +362,27 @@ config MACH_SMDK4212
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_MFC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_SYSMMU
 	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDK4212
 
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index f3b328d0aff..f98a83a81ce 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1341,9 +1341,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
 
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 873c708fd34..5a12dc26f49 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -9,6 +9,7 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -498,6 +500,37 @@ static void __init origen_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
+static struct gpio_led origen_gpio_leds[] = {
+	{
+		.name			= "origen::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= EXYNOS4_GPX1(3),
+		.active_low		= 1,
+	},
+	{
+		.name			= "origen::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= EXYNOS4_GPX1(4),
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+	.leds		= origen_gpio_leds,
+	.num_leds	= ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &origen_gpio_led_info,
+	},
+};
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -654,6 +687,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -676,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
+	&origen_leds_gpio,
 	&origen_device_bluetooth,
 };
 
@@ -711,7 +746,7 @@ static void s5p_tv_setup(void)
 static void __init origen_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
@@ -743,7 +778,7 @@ static void __init origen_machine_init(void)
 
 	origen_ehci_init();
 	origen_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fb09c70e195..b26beb13ebe 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -13,12 +13,14 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/io.h>
+#include <linux/lcd.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -28,15 +30,18 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
+#include <plat/regs-fb.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
 };
 
 static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
 
 static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
+	.rows		= 3,
+	.cols		= 8,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 8,
+			.right_margin	= 8,
+			.upper_margin	= 6,
+			.lower_margin	= 6,
+			.hsync_len	= 6,
+			.vsync_len	= 4,
+			.xres		= 480,
+			.yres		= 800,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
+static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
+	.xres		= 480,
+	.yres		= 800,
+	.virtual_x	= 480,
+	.virtual_y	= 800 * 2,
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct fb_videomode smdk4x12_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 8,
+	.upper_margin	= 6,
+	.lower_margin	= 6,
+	.hsync_len	= 6,
+	.vsync_len	= 4,
+	.xres		= 480,
+	.yres		= 800,
+};
+
+static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
+	.win[0]		= &smdk4x12_fb_win0,
+	.vtiming	= &smdk4x12_lcd_timing,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+#endif
+
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
 static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c3,
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
 	&s5p_device_fimc_md,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&samsung_device_keypad,
 };
 
 static void __init smdk4x12_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
-
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
 
+	s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
+	s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
+
 	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
 }
 
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 5fb209c4a59..3cfa688d274 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -270,6 +271,15 @@ static void __init smdkv310_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
+
+/* Audio device */
+static struct platform_device smdkv310_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -278,6 +288,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -301,6 +312,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
 	&s5p_device_fimd0,
+	&smdkv310_device_audio,
 	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
@@ -353,7 +365,7 @@ static void s5p_tv_setup(void)
 static void __init smdkv310_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
@@ -389,7 +401,7 @@ static void __init smdkv310_machine_init(void)
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -416,5 +428,6 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 68719f57dce..4d1f40d44ed 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1099,9 +1099,8 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b779ddd86fa..19b771d0c0d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -217,6 +217,10 @@ endif
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
+ifneq ($(CONFIG_DRM_OMAP),)
+obj-y					+= drm.o
+endif
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e17284a803..ad8a7d94afc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -821,6 +821,9 @@ static void __init omap_4430sdp_display_init(void)
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* NIRQ2 for twl6040 */
+	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ded100c80a9..97d719047af 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -490,6 +490,71 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.power		= &cm_t35_power_data,
 };
 
+#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#include <media/omap3isp.h>
+#include "devices.h"
+
+static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("mt9t001", 0x5d),
+	},
+	{
+		I2C_BOARD_INFO("tvp5150", 0x5c),
+	},
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = {
+	{
+		.board_info = &cm_t35_isp_i2c_boardinfo[0],
+		.i2c_adapter_id = 3,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = {
+	{
+		.board_info = &cm_t35_isp_i2c_boardinfo[1],
+		.i2c_adapter_id = 3,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = {
+	{
+		.subdevs = cm_t35_isp_primary_subdevs,
+		.interface = ISP_INTERFACE_PARALLEL,
+		.bus = {
+			.parallel = {
+				.clk_pol = 1,
+			},
+		},
+	},
+	{
+		.subdevs = cm_t35_isp_secondary_subdevs,
+		.interface = ISP_INTERFACE_PARALLEL,
+		.bus = {
+			.parallel = {
+				.clk_pol = 0,
+			},
+		},
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_platform_data cm_t35_isp_pdata = {
+	.subdevs = cm_t35_isp_subdevs,
+};
+
+static void __init cm_t35_init_camera(void)
+{
+	if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
+		pr_warn("CM-T3x: Failed registering camera device!\n");
+}
+
+#else
+static inline void cm_t35_init_camera(void) {}
+#endif /* CONFIG_VIDEO_OMAP3 */
+
 static void __init cm_t35_init_i2c(void)
 {
 	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
@@ -497,6 +562,8 @@ static void __init cm_t35_init_i2c(void)
 			      TWL_COMMON_PDATA_AUDIO);
 
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
+
+	omap_register_i2c_bus(3, 400, NULL, 0);
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -574,6 +641,27 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 
+	/* Camera */
+	OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+
 	/* display controls */
 	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -646,6 +734,7 @@ static void __init cm_t3x_common_init(void)
 
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
+	cm_t35_init_camera();
 }
 
 static void __init cm_t35_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 639bd07ea38..ef230a0eb5e 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -24,6 +24,10 @@
 #include <linux/leds.h>
 #include <linux/interrupt.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
@@ -43,6 +47,7 @@
 
 #include <plat/board.h>
 #include <plat/usb.h>
+#include <plat/nand.h>
 #include "common.h"
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
@@ -53,7 +58,6 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
-#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
@@ -355,6 +359,19 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 
 	platform_device_register(&leds_gpio);
 
+	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
+	 * for starting USB tranceiver
+	 */
+#ifdef CONFIG_TWL4030_CORE
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+		u8 val;
+
+		twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
+		val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
+		twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
+	}
+#endif
+
 	return 0;
 }
 
@@ -461,6 +478,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
 };
 #endif
 
+/* VAUX2 for USB */
+static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
+	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
+	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
+	REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+	REGULATOR_SUPPLY("vaux2", NULL),
+};
+
+static struct regulator_init_data omap3evm_vaux2 = {
+	.constraints = {
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3evm_vaux2_supplies),
+	.consumer_supplies		= omap3evm_vaux2_supplies,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	/* platform_data for children goes here */
 	.keypad		= &omap3evm_kp_data,
@@ -607,6 +646,37 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
 };
 
+static struct mtd_partition omap3evm_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 4*(SZ_128K),
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 14*(SZ_128K),
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "U-Boot Env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2*(SZ_128K)
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 40*(SZ_128K)
+	},
+	{
+		.name           = "File system",
+		.size           = MTDPART_SIZ_FULL,
+		.offset         = MTDPART_OFS_APPEND,
+	},
+};
+
 static void __init omap3_evm_init(void)
 {
 	struct omap_board_mux *obm;
@@ -623,6 +693,9 @@ static void __init omap3_evm_init(void)
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
 
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+		omap3evm_twldata.vaux2 = &omap3evm_vaux2;
+
 	omap3_evm_i2c_init();
 
 	omap_display_init(&omap3_evm_dss_data);
@@ -656,6 +729,9 @@ static void __init omap3_evm_init(void)
 	}
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
+	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+			     ARRAY_SIZE(omap3evm_nand_partitions));
+
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 982fb2622ab..b627cdc12b8 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -379,6 +379,9 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
 	/* dispc2_data0 */
 	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* NIRQ2 for twl6040 */
+	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c1875862679..14734746457 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
+/*
+ * ADS7846 driver maybe request a gpio according to the value
+ * of pdata->get_pendown_state, but we have done this. So set
+ * get_pendown_state to avoid twice gpio requesting.
+ */
+static int omap3_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
+	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a42836a..4c4ef6a6166 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,6 +4,7 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
+#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
new file mode 100644
index 00000000000..72e0f01b715
--- /dev/null
+++ b/