Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6

* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits)
  video: platinumfb: Add __devexit_p at necessary place
  drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data
  drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data
  drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported
  drivers/video: fsl-diu-fb: remove unused panel operating mode support
  drivers/video: fsl-diu-fb: use an enum for the AOI index
  drivers/video: fsl-diu-fb: add several new video modes
  drivers/video: fsl-diu-fb: remove broken screen blanking support
  drivers/video: fsl-diu-fb: move some definitions out of the header file
  drivers/video: fsl-diu-fb: fix some ioctls
  video: da8xx-fb: Increased resolution configuration of revised LCDC IP
  OMAPDSS: picodlp: add missing #include <linux/module.h>
  fb: fix au1100fb bitrot.
  mx3fb: fix NULL pointer dereference in screen blanking.
  video: irq: Remove IRQF_DISABLED
  smscufx: change edid data to u8 instead of char
  OMAPDSS: DISPC: zorder support for DSS overlays
  OMAPDSS: DISPC: VIDEO3 pipeline support
  OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
  video/omap: fix build dependencies
  ...

Fix up conflicts in:
 - drivers/staging/xgifb/XGI_main_26.c
	Changes to XGIfb_pan_var()
 - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c}
	Removed (or in the case of apollon.c, merged into the generic
	DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)

25 files changed, 584 insertions, 276 deletions

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 87f43ade440..f8ce84b69eb 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -39,6 +39,9 @@
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@@ -99,20 +102,72 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct platform_device sdp2430_lcd_device = {
-	.name		= "sdp2430_lcd",
-	.id		= -1,
-};
-
 static struct platform_device *sdp2430_devices[] __initdata = {
 	&sdp2430_flash_device,
+};
+
+/* LCD */
+#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
+#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
+
+static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
+	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
+
+	return 0;
+}
+
+static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
+	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
+}
+
+static struct panel_generic_dpi_data sdp2430_panel_data = {
+	.name			= "nec_nl2432dr22-11b",
+	.platform_enable	= sdp2430_panel_enable_lcd,
+	.platform_disable	= sdp2430_panel_disable_lcd,
+};
+
+static struct omap_dss_device sdp2430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 16,
+	.data			= &sdp2430_panel_data,
+};
+
+static struct omap_dss_device *sdp2430_dss_devices[] = {
 	&sdp2430_lcd_device,
 };
 
-static struct omap_lcd_config sdp2430_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct omap_dss_board_info sdp2430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
+	.devices	= sdp2430_dss_devices,
+	.default_device	= &sdp2430_lcd_device,
 };
 
+static void __init sdp2430_display_init(void)
+{
+	int r;
+
+	static struct gpio gpios[] __initdata = {
+		{ SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
+			"LCD reset" },
+		{ SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
+			"LCD Backlight" },
+	};
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r) {
+		pr_err("Cannot request LCD GPIOs, error %d\n", r);
+		return;
+	}
+
+	omap_display_init(&sdp2430_dss_data);
+}
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
 static struct omap_smc91x_platform_data board_smc91x_data = {
@@ -137,10 +192,6 @@ static inline void board_smc91x_init(void)
 
 #endif
 
-static struct omap_board_config_kernel sdp2430_config[] __initdata = {
-	{OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
 static void __init omap_2430sdp_init_early(void)
 {
 	omap2_init_common_infrastructure();
@@ -229,9 +280,6 @@ static void __init omap_2430sdp_init(void)
 {
 	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
-
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -247,6 +295,8 @@ static void __init omap_2430sdp_init(void)
 	/* Turn off secondary LCD backlight */
 	gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
 			 "Secondary LCD backlight");
+
+	sdp2430_display_init();
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 2430531b223..204beddcb94 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -37,7 +37,7 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include <plat/gpmc-smc91x.h>
 
@@ -186,8 +186,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
 	.platform_disable	= sdp3430_panel_disable_lcd,
 };
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= sdp3430_panel_enable_dvi,
 	.platform_disable	= sdp3430_panel_disable_dvi,
 };
@@ -195,7 +194,7 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device sdp3430_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index be931105d68..484cec54882 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -38,6 +38,8 @@
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
 #include <video/omapdss.h>
+#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
 
 #include "mux.h"
@@ -52,6 +54,8 @@
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO	40
 
 #define GPIO_WIFI_PMENA		54
 #define GPIO_WIFI_IRQ		53
@@ -340,11 +344,6 @@ static int __init omap_ethernet_init(void)
 	return status;
 }
 
-static struct platform_device sdp4430_lcd_device = {
-	.name		= "sdp4430_lcd",
-	.id		= -1,
-};
-
 static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
 	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
 	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
@@ -374,21 +373,12 @@ static struct platform_device sdp4430_vbat = {
 };
 
 static struct platform_device *sdp4430_devices[] __initdata = {
-	&sdp4430_lcd_device,
 	&sdp4430_gpio_keys_device,
 	&sdp4430_leds_gpio,
 	&sdp4430_leds_pwm,
 	&sdp4430_vbat,
 };
 
-static struct omap_lcd_config sdp4430_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct omap_board_config_kernel sdp4430_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
-};
-
 static void __init omap_4430sdp_init_early(void)
 {
 	omap2_init_common_infrastructure();
@@ -648,37 +638,202 @@ static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
 	gpio_free(HDMI_GPIO_HPD);
 }
 
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.clocks	= {
-		.dispc	= {
+static struct nokia_dsi_panel_data dsi1_panel = {
+		.name		= "taal",
+		.reset_gpio	= 102,
+		.use_ext_te	= false,
+		.ext_te_gpio	= 101,
+		.esd_interval	= 0,
+};
+
+static struct omap_dss_device sdp4430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "taal",
+	.type			= OMAP_DISPLAY_TYPE_DSI,
+	.data			= &dsi1_panel,
+	.phy.dsi		= {
+		.clk_lane	= 1,
+		.clk_pol	= 0,
+		.data1_lane	= 2,
+		.data1_pol	= 0,
+		.data2_lane	= 3,
+		.data2_pol	= 0,
+
+		.module		= 0,
+	},
+
+	.clocks = {
+		.dispc = {
+			.channel = {
+				/* Logic Clock = 172.8 MHz */
+				.lck_div	= 1,
+				/* Pixel Clock = 34.56 MHz */
+				.pck_div	= 5,
+				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
+			},
 			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
 		},
-		.hdmi	= {
-			.regn	= 15,
-			.regm2	= 1,
+
+		.dsi = {
+			.regn		= 16,	/* Fint = 2.4 MHz */
+			.regm		= 180,	/* DDR Clock = 216 MHz */
+			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
+			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
+
+			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
+			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
+		},
+	},
+	.channel		= OMAP_DSS_CHANNEL_LCD,
+};
+
+static struct nokia_dsi_panel_data dsi2_panel = {
+		.name		= "taal",
+		.reset_gpio	= 104,
+		.use_ext_te	= false,
+		.ext_te_gpio	= 103,
+		.esd_interval	= 0,
+};
+
+static struct omap_dss_device sdp4430_lcd2_device = {
+	.name			= "lcd2",
+	.driver_name		= "taal",
+	.type			= OMAP_DISPLAY_TYPE_DSI,
+	.data			= &dsi2_panel,
+	.phy.dsi		= {
+		.clk_lane	= 1,
+		.clk_pol	= 0,
+		.data1_lane	= 2,
+		.data1_pol	= 0,
+		.data2_lane	= 3,
+		.data2_pol	= 0,
+
+		.module		= 1,
+	},
+
+	.clocks = {
+		.dispc = {
+			.channel = {
+				/* Logic Clock = 172.8 MHz */
+				.lck_div	= 1,
+				/* Pixel Clock = 34.56 MHz */
+				.pck_div	= 5,
+				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
+			},
+			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
+		},
+
+		.dsi = {
+			.regn		= 16,	/* Fint = 2.4 MHz */
+			.regm		= 180,	/* DDR Clock = 216 MHz */
+			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
+			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
+
+			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
+			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
 		},
 	},
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+static void sdp4430_lcd_init(void)
+{
+	int r;
+
+	r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
+		"lcd1_reset_gpio");
+	if (r)
+		pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
+
+	r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
+		"lcd2_reset_gpio");
+	if (r)
+		pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
+}
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
 	.platform_enable = sdp4430_panel_enable_hdmi,
 	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,
 };
 
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+	.picodlp_adapter_id	= 2,
+	.emu_done_gpio		= 44,
+	.pwrgood_gpio		= 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+	int r;
+	const struct gpio picodlp_gpios[] = {
+		{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+			"DLP POWER ON"},
+		{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+			"DLP EMU DONE"},
+		{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+			"DLP PWRGOOD"},
+	};
+
+	r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+	if (r)
+		pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DISPLAY_SEL_GPIO, 0);
+	gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+	return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DLP_POWER_ON_GPIO, 0);
+	gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+	.name			= "picodlp",
+	.driver_name		= "picodlp_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+	.platform_enable	= sdp4430_panel_enable_picodlp,
+	.platform_disable	= sdp4430_panel_disable_picodlp,
+	.data			= &sdp4430_picodlp_pdata,
+};
+
 static struct omap_dss_device *sdp4430_dss_devices[] = {
+	&sdp4430_lcd_device,
+	&sdp4430_lcd2_device,
 	&sdp4430_hdmi_device,
+	&sdp4430_picodlp_device,
 };
 
 static struct omap_dss_board_info sdp4430_dss_data = {
 	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
 	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_hdmi_device,
+	.default_device	= &sdp4430_lcd_device,
 };
 
-void omap_4430sdp_display_init(void)
+static void omap_4430sdp_display_init(void)
 {
+	int r;
+
+	/* Enable LCD2 by default (instead of Pico DLP) */
+	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+			"display_sel");
+	if (r)
+		pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+	sdp4430_lcd_init();
 	sdp4430_hdmi_mux_init();
+	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
 }
 
@@ -802,9 +957,6 @@ static void __init omap_4430sdp_init(void)
 		package = OMAP_PACKAGE_CBL;
 	omap4_mux_init(board_mux, NULL, package);
 
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
-
 	omap4_i2c_init();
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 1325085e453..ab10f75984d 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -36,6 +36,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include "mux.h"
 #include "control.h"
@@ -333,8 +334,7 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= am3517_evm_panel_enable_dvi,
 	.platform_disable	= am3517_evm_panel_disable_dvi,
 };
@@ -342,7 +342,7 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device am3517_evm_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 67800e647d7..ad55351e0ca 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -40,6 +40,9 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
 #include "mux.h"
 #include "control.h"
 
@@ -149,11 +152,6 @@ static struct platform_device apollon_smc91x_device = {
 	.resource	= apollon_smc91x_resources,
 };
 
-static struct platform_device apollon_lcd_device = {
-	.name		= "apollon_lcd",
-	.id		= -1,
-};
-
 static struct omap_led_config apollon_led_config[] = {
 	{
 		.cdev	= {
@@ -191,7 +189,6 @@ static struct platform_device apollon_led_device = {
 static struct platform_device *apollon_devices[] __initdata = {
 	&apollon_onenand_device,
 	&apollon_smc91x_device,
-	&apollon_lcd_device,
 	&apollon_led_device,
 };
 
@@ -265,12 +262,26 @@ static struct omap_usb_config apollon_usb_config __initdata = {
 	.pins[0]	= 6,
 };
 
-static struct omap_lcd_config apollon_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct panel_generic_dpi_data apollon_panel_data = {
+	.name			= "apollon",
 };
 
-static struct omap_board_config_kernel apollon_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&apollon_lcd_config },
+static struct omap_dss_device apollon_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 18,
+	.data			= &apollon_panel_data,
+};
+
+static struct omap_dss_device *apollon_dss_devices[] = {
+	&apollon_lcd_device,
+};
+
+static struct omap_dss_board_info apollon_dss_data = {
+	.num_devices	= ARRAY_SIZE(apollon_dss_devices),
+	.devices	= apollon_dss_devices,
+	.default_device	= &apollon_lcd_device,
 };
 
 static void __init omap_apollon_init_early(void)
@@ -314,8 +325,6 @@ static void __init omap_apollon_init(void)
 	u32 v;
 
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 
 	apollon_init_smc91x();
 	apollon_led_init();
@@ -340,6 +349,8 @@ static void __init omap_apollon_init(void)
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
 	omap_serial_init();
+
+	omap_display_init(&apollon_dss_data);
 }
 
 static void __init omap_apollon_map_io(void)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 38179c17550..6e0f0d2e39b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -43,6 +43,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>
@@ -242,8 +243,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
 	.phy.dpi.data_lines	= 18,
 };
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= cm_t35_panel_enable_dvi,
 	.platform_disable	= cm_t35_panel_disable_dvi,
 };
@@ -251,7 +251,7 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device cm_t35_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 99a42432ac9..d9bfe54917e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -47,6 +47,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -139,7 +140,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
 };
 
 static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "generic",
+	.name			= "innolux_at070tn83",
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
@@ -152,8 +153,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
 	.phy.dpi.data_lines     = 24,
 };
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable        = devkit8000_panel_enable_dvi,
 	.platform_disable       = devkit8000_panel_disable_dvi,
 };
@@ -161,7 +161,7 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device devkit8000_dvi_device = {
 	.name                   = "dvi",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "generic_dpi_panel",
+	.driver_name            = "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines     = 24,
 };
@@ -267,7 +267,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 
 static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
 };
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 82421a4cfa9..8fcf79628ca 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -39,6 +39,9 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
 #include "mux.h"
 #include "control.h"
 
@@ -156,17 +159,33 @@ static struct platform_device h4_kp_device = {
 	},
 };
 
-static struct platform_device h4_lcd_device = {
-	.name		= "lcd_h4",
-	.id		= -1,
-};
-
 static struct platform_device *h4_devices[] __initdata = {
 	&h4_flash_device,
 	&h4_kp_device,
+};
+
+static struct panel_generic_dpi_data h4_panel_data = {
+	.name			= "h4",
+};
+
+static struct omap_dss_device h4_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 16,
+	.data			= &h4_panel_data,
+};
+
+static struct omap_dss_device *h4_dss_devices[] = {
 	&h4_lcd_device,
 };
 
+static struct omap_dss_board_info h4_dss_data = {
+	.num_devices	= ARRAY_SIZE(h4_dss_devices),
+	.devices	= h4_dss_devices,
+	.default_device	= &h4_lcd_device,
+};
+
 /* 2420 Sysboot setup (2430 is different) */
 static u32 get_sysboot_value(void)
 {
@@ -270,10 +289,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static struct omap_lcd_config h4_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct omap_usb_config h4_usb_config __initdata = {
 	/* S1.10 OFF -- usb "download port"
 	 * usb0 switched to Mini-B port and isp1105 transceiver;
@@ -285,10 +300,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
 };
 
-static struct omap_board_config_kernel h4_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&h4_lcd_config },
-};
-
 static void __init omap_h4_init_early(void)
 {
 	omap2_init_common_infrastructure();
@@ -330,9 +341,6 @@ static void __init omap_h4_init(void)
 {
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
 
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
-
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
@@ -371,6 +379,8 @@ static void __init omap_h4_init(void)
 	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
 	h4_init_flash();
+
+	omap_display_init(&h4_dss_data);
 }
 
 static void __init omap_h4_map_io(void)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7040352b16b..96f9ef34d2f 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -32,7 +32,7 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 #include <plat/onenand.h>
 
 #include "mux.h"
@@ -455,16 +455,16 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
 	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= igep2_enable_dvi,
 	.platform_disable	= igep2_disable_dvi,
+	.i2c_bus_num = 3,
 };
 
 static struct omap_dss_device igep2_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index abe8c7e496a..f8f8a68a489 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -43,6 +44,9 @@
 #include <plat/usb.h>
 #include <plat/gpmc-smsc911x.h>
 
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
 #include "board-flash.h"
 #include "mux.h"
 #include "hsmmc.h"
@@ -179,29 +183,108 @@ static inline void __init ldp_init_smsc911x(void)
 	gpmc_smsc911x_init(&smsc911x_cfg);
 }
 
-static struct platform_device ldp_lcd_device = {
-	.name		= "ldp_lcd",
-	.id		= -1,
+/* LCD */
+
+static int ldp_backlight_gpio;
+static int ldp_lcd_enable_gpio;
+
+#define LCD_PANEL_RESET_GPIO		55
+#define LCD_PANEL_QVGA_GPIO		56
+
+static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (gpio_is_valid(ldp_lcd_enable_gpio))
+		gpio_direction_output(ldp_lcd_enable_gpio, 1);
+	if (gpio_is_valid(ldp_backlight_gpio))
+		gpio_direction_output(ldp_backlight_gpio, 1);
+
+	return 0;
+}
+
+static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	if (gpio_is_valid(ldp_lcd_enable_gpio))
+		gpio_direction_output(ldp_lcd_enable_gpio, 0);
+	if (gpio_is_valid(ldp_backlight_gpio))
+		gpio_direction_output(ldp_backlight_gpio, 0);
+}
+
+static struct panel_generic_dpi_data ldp_panel_data = {
+	.name			= "nec_nl2432dr22-11b",
+	.platform_enable	= ldp_panel_enable_lcd,
+	.platform_disable	= ldp_panel_disable_lcd,
 };
 
-static struct omap_lcd_config ldp_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct omap_dss_device ldp_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 18,
+	.data			= &ldp_panel_data,
+};
+
+static struct omap_dss_device *ldp_dss_devices[] = {
+	&ldp_lcd_device,
 };
 
-static struct omap_board_config_kernel ldp_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&ldp_lcd_config },
+static struct omap_dss_board_info ldp_dss_data = {
+	.num_devices	= ARRAY_SIZE(ldp_dss_devices),
+	.devices	= ldp_dss_devices,
+	.default_device	= &ldp_lcd_device,
 };
 
+static void __init ldp_display_init(void)
+{
+	int r;
+
+	static struct gpio gpios[] __initdata = {
+		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
+		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
+	};
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r) {
+		pr_err("Cannot request LCD GPIOs, error %d\n", r);
+		return;
+	}
+
+	omap_display_init(&ldp_dss_data);
+}
+
 static void __init omap_ldp_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
 }
 
+static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
+{
+	int r;
+
+	struct gpio gpios[] = {
+		{gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
+		{gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
+	};
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r) {
+		pr_err("Cannot request LCD GPIOs, error %d\n", r);
+		ldp_backlight_gpio = -EINVAL;
+		ldp_lcd_enable_gpio = -EINVAL;
+		return r;
+	}
+
+	ldp_backlight_gpio = gpio + 15;
+	ldp_lcd_enable_gpio = gpio + 7;
+
+	return 0;
+}
+
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= ldp_twl_gpio_setup,
 };
 
 static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
@@ -243,10 +326,31 @@ static struct regulator_init_data ldp_vaux1 = {
 	.consumer_supplies		= ldp_vaux1_supplies,
 };
 
+static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
+static struct regulator_init_data ldp_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(ldp_vpll2_supplies),
+	.consumer_supplies	= ldp_vpll2_supplies,
+};
+
 static struct twl4030_platform_data ldp_twldata = {
 	/* platform_data for children goes here */
 	.vmmc1		= &ldp_vmmc1,
 	.vaux1		= &ldp_vaux1,
+	.vpll2		= &ldp_vpll2,
 	.gpio		= &ldp_gpio_data,
 	.keypad		= &ldp_kp_twl4030_data,
 };
@@ -272,7 +376,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 };
 
 static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_lcd_device,
 	&ldp_gpio_keys_device,
 };
 
@@ -317,8 +420,6 @@ static struct mtd_partition ldp_nand_partitions[] = {
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ldp_init_smsc911x();
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
@@ -329,6 +430,7 @@ static void __init omap_ldp_init(void)
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
 	omap2_hsmmc_init(mmc);
+	ldp_display_init();
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 1fde8a0474b..928933ba28c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,7 +42,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -203,16 +203,16 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
 		gpio_set_value(dssdev->reset_gpio, 0);
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable = beagle_enable_dvi,
 	.platform_disable = beagle_disable_dvi,
+	.i2c_bus_num = 3,
 };
 
 static struct omap_dss_device beagle_dvi_device = {
 	.type = OMAP_DISPLAY_TYPE_DPI,
 	.name = "dvi",
-	.driver_name = "generic_dpi_panel",
+	.driver_name = "dvi",
 	.data = &dvi_panel,
 	.phy.dpi.data_lines = 24,
 	.reset_gpio = -EINVAL,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 15c69a0c1ce..0d5a9e46a6a 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -45,7 +45,7 @@
 #include <plat/common.h>
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -247,8 +247,7 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= omap3_evm_enable_dvi,
 	.platform_disable	= omap3_evm_disable_dvi,
 };
@@ -256,7 +255,7 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device omap3_evm_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ace56938dd3..cca523eb73b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -335,7 +335,7 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
 };
 
 static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index ba13e1d5d0a..4732589ad97 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -41,6 +41,7 @@
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -107,39 +108,6 @@ static void __init omap3_stalker_display_init(void)
 	return;
 }
 
-static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(DSS_ENABLE_GPIO, 1);
-	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
-	lcd_enabled = 1;
-	return 0;
-}
-
-static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DSS_ENABLE_GPIO, 0);
-	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
-	lcd_enabled = 0;
-}
-
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "generic",
-	.platform_enable	= omap3_stalker_enable_lcd,
-	.platform_disable	= omap3_stalker_disable_lcd,
-};
-
-static struct omap_dss_device omap3_stalker_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines	= 24,
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-};
-
 static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
 {
 	return 0;
@@ -179,8 +147,7 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= omap3_stalker_enable_dvi,
 	.platform_disable	= omap3_stalker_disable_dvi,
 };
@@ -188,13 +155,12 @@ static struct panel_generic_dpi_data dvi_panel = {
 static struct omap_dss_device omap3_stalker_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
 
 static struct omap_dss_device *omap3_stalker_dss_devices[] = {
-	&omap3_stalker_lcd_device,
 	&omap3_stalker_tv_device,
 	&omap3_stalker_dvi_device,
 };
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 49e4bd207cb..abb68913e04 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -104,15 +104,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct platform_device omap3_touchbook_lcd_device = {
-	.name		= "omap3touchbook_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -165,14 +156,12 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
 static struct regulator_consumer_supply touchbook_vdac_supply[] = {
 {
 	.supply		= "vdac",
-	.dev		= &omap3_touchbook_lcd_device.dev,
 },
 };
 
 static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
 {
 	.supply		= "vdvi",
-	.dev		= &omap3_touchbook_lcd_device.dev,
 },
 };
 
@@ -316,10 +305,6 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_touchbook_lcd_config },
-};
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -339,7 +324,6 @@ static void __init omap3_touchbook_init_irq(void)
 }
 
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
-	&omap3_touchbook_lcd_device,
 	&leds_gpio,
 	&keys_gpio,
 };
@@ -376,8 +360,6 @@ early_param("tbr", early_touchbook_revision);
 static void __init omap3_touchbook_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = omap3_touchbook_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
 
 	pm_power_off = omap3_touchbook_poweroff;
 
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 683bede73d5..ed38d8fd090 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -40,7 +40,7 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 
 #include "hsmmc.h"
 #include "control.h"
@@ -455,16 +455,16 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
 }
 
 /* Using generic display panel */
-static struct panel_generic_dpi_data omap4_dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data omap4_dvi_panel = {
 	.platform_enable	= omap4_panda_enable_dvi,
 	.platform_disable	= omap4_panda_disable_dvi,
+	.i2c_bus_num = 3,
 };
 
 struct omap_dss_device omap4_panda_dvi_device = {
 	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &omap4_dvi_panel,
 	.phy.dpi.data_lines	= 24,
 	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index e592fb134c4..ec0f60c1cb7 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -46,6 +46,7 @@
 #include <plat/common.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
@@ -182,16 +183,16 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
-static struct panel_generic_dpi_data dvi_panel = {
-	.name			= "generic",
+static struct panel_dvi_platform_data dvi_panel = {
 	.platform_enable	= overo_panel_enable_dvi,
 	.platform_disable	= overo_panel_disable_dvi,
+	.i2c_bus_num		= 3,
 };
 
 static struct omap_dss_device overo_dvi_device = {
 	.name			= "dvi",
 	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
+	.driver_name		= "dvi",
 	.data			= &dvi_panel,
 	.phy.dpi.data_lines	= 24,
 };
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index a6c473bbb3d..faa2a8e28de 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -79,29 +79,6 @@ static struct cpuidle_params rx51_cpuidle_params[] = {
 	{7505 + 15274, 484329, 1},
 };
 
-static struct omap_lcd_config rx51_lcd_config = {
-	.ctrl_name	= "internal",
-};
-
-static struct omap_fbmem_config rx51_fbmem0_config = {
-	.size = 752 * 1024,
-};
-
-static struct omap_fbmem_config rx51_fbmem1_config = {
-	.size = 752 * 1024,
-};
-
-static struct omap_fbmem_config rx51_fbmem2_config = {
-	.size = 752 * 1024,
-};
-
-static struct omap_board_config_kernel rx51_config[] = {
-	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
-	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
-	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
-	{ OMAP_TAG_LCD,		&rx51_lcd_config },
-};
-
 static void __init rx51_init_early(void)
 {
 	struct omap_sdrc_params *sdrc_params;
@@ -128,8 +105,6 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init rx51_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index a5b7a236aa5..62510ec863c 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -27,6 +27,8 @@
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
 
+#include "control.h"
+
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
 	.id            = -1,
@@ -61,7 +63,7 @@ static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
 	{ "dss_venc", "omapdss_venc", -1 },
-	{ "dss_dsi1", "omapdss_dsi1", -1 },
+	{ "dss_dsi1", "omapdss_dsi", 0 },
 };
 
 static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
@@ -69,11 +71,58 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
 	{ "dss_dispc", "omapdss_dispc", -1 },
 	{ "dss_rfbi", "omapdss_rfbi", -1 },
 	{ "dss_venc", "omapdss_venc", -1 },
-	{ "dss_dsi1", "omapdss_dsi1", -1 },
-	{ "dss_dsi2", "omapdss_dsi2", -1 },
+	{ "dss_dsi1", "omapdss_dsi", 0 },
+	{ "dss_dsi2", "omapdss_dsi", 1 },
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+{
+	u32 enable_mask, enable_shift;
+	u32 pipd_mask, pipd_shift;
+	u32 reg;
+
+	if (dsi_id == 0) {
+		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
+		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
+		pipd_mask = OMAP4_DSI1_PIPD_MASK;
+		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
+	} else if (dsi_id == 1) {
+		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
+		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
+		pipd_mask = OMAP4_DSI2_PIPD_MASK;
+		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
+	} else {
+		return -ENODEV;
+	}
+
+	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+	reg &= ~enable_mask;
+	reg &= ~pipd_mask;
+
+	reg |= (lanes << enable_shift) & enable_mask;
+	reg |= (lanes << pipd_shift) & pipd_mask;
+
+	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+	return 0;
+}
+
+static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
+{
+	if (cpu_is_omap44xx())
+		return omap4_dsi_mux_pads(dsi_id, lane_mask);
+
+	return 0;
+}
+
+static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
+{
+	if (cpu_is_omap44xx())
+		omap4_dsi_mux_pads(dsi_id, 0);
+}
+
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
@@ -96,6 +145,11 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
 	}
 
+	if (board_data->dsi_enable_pads == NULL)
+		board_data->dsi_enable_pads = omap_dsi_enable_pads;
+	if (board_data->dsi_disable_pads == NULL)
+		board_data->dsi_disable_pads = omap_dsi_disable_pads;
+
 	pdata.board_data = board_data;
 	pdata.board_data->get_context_loss_count =
 		omap_pm_get_dev_context_loss_count;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index daa056ed873..52243577216 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -99,7 +99,7 @@ static struct regulator_init_data omap3_vdac_idata = {
 
 static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
 };
 
 static struct regulator_init_data omap3_vpll2_idata = {
@@ -235,6 +235,12 @@ static struct regulator_init_data omap4_vana_idata = {
 	},
 };
 
+static struct regulator_consumer_supply omap4_vcxio_supply[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"),
+};
+
 static struct regulator_init_data omap4_vcxio_idata = {
 	.constraints = {
 		.min_uV			= 1800000,
@@ -243,7 +249,10 @@ static struct regulator_init_data omap4_vcxio_idata = {
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
+		.always_on		= true,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(omap4_vcxio_supply),
+	.consumer_supplies	= omap4_vcxio_supply,
 };
 
 static struct regulator_init_data omap4_vusb_idata = {
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 4de92dc570b..3689ad2e915 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1597,6 +1597,7 @@ static void __init mackerel_init(void)
 
 	sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
 	sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
+	sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
 	sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
 	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
 	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index e41ebbdb3e1..cfe958e94e1 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -66,8 +66,8 @@ struct fsl_diu_shared_fb {
 	bool		in_use;
 };
 
-unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
-				      int monitor_port)
+u32 mpc512x_get_pixel_format(enum fsl_diu_monitor_port port,
+			     unsigned int bits_per_pixel)
 {
 	switch (bits_per_pixel) {
 	case 32:
@@ -80,11 +80,12 @@ unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
 	return 0x00000400;
 }
 
-void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc512x_set_gamma_table(enum fsl_diu_monitor_port port,
+			     char *gamma_table_base)
 {
 }
 
-void mpc512x_set_monitor_port(int monitor_port)
+void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port)
 {
 }
 
@@ -182,14 +183,10 @@ void mpc512x_set_pixel_clock(unsigned int pixclock)
 	iounmap(ccm);
 }
 
-ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf)
+enum fsl_diu_monitor_port
+mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
-	return sprintf(buf, "0 - 5121 LCD\n");
-}
-
-int mpc512x_set_sysfs_monitor_port(int val)
-{
-	return 0;
+	return FSL_DIU_PORT_DVI;
 }
 
 static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
@@ -256,7 +253,7 @@ void __init mpc512x_init_diu(void)
 	}
 
 	mode = in_be32(&diu_reg->diu_mode);
-	if (mode != MFB_MODE1) {
+	if (mode == MFB_MODE0) {
 		pr_info("%s: DIU OFF\n", __func__);
 		goto out;
 	}
@@ -332,8 +329,7 @@ void __init mpc512x_setup_diu(void)
 	diu_ops.set_gamma_table		= mpc512x_set_gamma_table;
 	diu_ops.set_monitor_port	= mpc512x_set_monitor_port;
 	diu_ops.set_pixel_clock		= mpc512x_set_pixel_clock;
-	diu_ops.show_monitor_port	= mpc512x_show_monitor_port;
-	diu_ops.set_sysfs_monitor_port	= mpc512x_set_sysfs_monitor_port;
+	diu_ops.valid_monitor_port	= mpc512x_valid_monitor_port;
 	diu_ops.release_bootmem		= mpc512x_release_bootmem;
 #endif
 }
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 266b3aadfe5..c01c7277888 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -93,8 +93,8 @@
  * The Area Descriptor is a 32-bit value that determine which bits in each
  * pixel are to be used for each color.
  */
-static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
-	int monitor_port)
+static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port,
+				    unsigned int bits_per_pixel)
 {
 	switch (bits_per_pixel) {
 	case 32:
@@ -118,7 +118,8 @@ static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
  * On some boards, the gamma table for some ports may need to be modified.
  * This is not the case on the P1022DS, so we do nothing.
 */
-static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
+static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
+				    char *gamma_table_base)
 {
 }
 
@@ -126,7 +127,7 @@ static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
  * p1022ds_set_monitor_port: switch the output to a different monitor port
  *
  */
-static void p1022ds_set_monitor_port(int monitor_port)
+static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 {
 	struct device_node *pixis_node;
 	void __iomem *pixis;
@@ -145,19 +146,21 @@ static void p1022ds_set_monitor_port(int monitor_port)
 	}
 	brdcfg1 = pixis + 9;	/* BRDCFG1 is at offset 9 in the ngPIXIS */
 
-	switch (monitor_port) {
-	case 0: /* DVI */
+	switch (port) {
+	case FSL_DIU_PORT_DVI:
+		printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
 		/* Enable the DVI port, disable the DFP and the backlight */
 		clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
 			     PX_BRDCFG1_DVIEN);
 		break;
-	case 1: /* Single link LVDS */
+	case FSL_DIU_PORT_LVDS:
+		printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
 		/* Enable the DFP port, disable the DVI and the backlight */
 		clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
 			     PX_BRDCFG1_DFPEN);
 		break;
 	default:
-		pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+		pr_err("p1022ds: unsupported monitor port %i\n", port);
 	}
 
 	iounmap(pixis);
@@ -214,23 +217,18 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
 }
 
 /**
- * p1022ds_show_monitor_port: show the current monitor
- *
- * This function returns a string indicating whether the current monitor is
- * set to DVI or LVDS.
- */
-ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
-{
-	return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
-		monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
-}
-
-/**
- * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
+ * p1022ds_valid_monitor_port: set the monitor port for sysfs
  */
-int p1022ds_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
-	return val < 2 ? val : 0;
+	switch (port) {
+	case FSL_DIU_PORT_DVI:
+	case FSL_DIU_PORT_LVDS:
+		return port;
+	default:
+		return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+	}
 }
 
 #endif
@@ -305,8 +303,7 @@ static void __init p1022_ds_setup_arch(void)
 	diu_ops.set_gamma_table		= p1022ds_set_gamma_table;
 	diu_ops.set_monitor_port	= p1022ds_set_monitor_port;
 	diu_ops.set_pixel_clock		= p1022ds_set_pixel_clock;
-	diu_ops.show_monitor_port	= p1022ds_show_monitor_port;
-	diu_ops.set_sysfs_monitor_port	= p1022ds_set_sysfs_monitor_port;
+	diu_ops.valid_monitor_port	= p1022ds_valid_monitor_port;
 #endif
 
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 74e018ef724..13fa9a6403e 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -152,10 +152,10 @@ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 	(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
 	(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
 
-unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
-						int monitor_port)
+u32 mpc8610hpcd_get_pixel_format(enum fsl_diu_monitor_port port,
+				 unsigned int bits_per_pixel)
 {
-	static const unsigned long pixelformat[][3] = {
+	static const u32 pixelformat[][3] = {
 		{
 			MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
 			MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
@@ -170,7 +170,8 @@ unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
 	unsigned int arch_monitor;
 
 	/* The DVI port is mis-wired on revision 1 of this board. */
-	arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
+	arch_monitor =
+		((*pixis_arch == 0x01) && (port == FSL_DIU_PORT_DVI)) ? 0 : 1;
 
 	switch (bits_per_pixel) {
 	case 32:
@@ -185,10 +186,11 @@ unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
 	}
 }
 
-void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc8610hpcd_set_gamma_table(enum fsl_diu_monitor_port port,
+				 char *gamma_table_base)
 {
 	int i;
-	if (monitor_port == 2) {		/* dual link LVDS */
+	if (port == FSL_DIU_PORT_DLVDS) {
 		for (i = 0; i < 256*3; i++)
 			gamma_table_base[i] = (gamma_table_base[i] << 2) |
 					 ((gamma_table_base[i] >> 6) & 0x03);
@@ -199,17 +201,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
 #define PX_BRDCFG0_DLINK	(1 << 4)
 #define PX_BRDCFG0_DIU_MASK	(PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
 
-void mpc8610hpcd_set_monitor_port(int monitor_port)
+void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port)
 {
-	static const u8 bdcfg[] = {
-		PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
-		PX_BRDCFG0_DLINK,
-		0,
-	};
-
-	if (monitor_port < 3)
+	switch (port) {
+	case FSL_DIU_PORT_DVI:
 		clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
-			     bdcfg[monitor_port]);
+			     PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK);
+		break;
+	case FSL_DIU_PORT_LVDS:
+		clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+			     PX_BRDCFG0_DLINK);
+		break;
+	case FSL_DIU_PORT_DLVDS:
+		clrbits8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK);
+		break;
+	}
 }
 
 /**
@@ -262,20 +268,10 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
 	iounmap(guts);
 }
 
-ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE,
-			"%c0 - DVI\n"
-			"%c1 - Single link LVDS\n"
-			"%c2 - Dual link LVDS\n",
-			monitor_port == 0 ? '*' : ' ',
-			monitor_port == 1 ? '*' : ' ',
-			monitor_port == 2 ? '*' : ' ');
-}
-
-int mpc8610hpcd_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
 {
-	return val < 3 ? val : 0;
+	return port;
 }
 
 #endif
@@ -307,8 +303,7 @@ static void __init mpc86xx_hpcd_setup_arch(void)
 	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;
 	diu_ops.set_monitor_port	= mpc8610hpcd_set_monitor_port;
 	diu_ops.set_pixel_clock		= mpc8610hpcd_set_pixel_clock;
-	diu_ops.show_monitor_port	= mpc8610hpcd_show_monitor_port;
-	diu_ops.set_sysfs_monitor_port	= mpc8610hpcd_set_sysfs_monitor_port;
+	diu_ops.valid_monitor_port	= mpc8610hpcd_valid_monitor_port;
 #endif
 
 	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 2ece02beb8f..c6d00736f07 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -22,15 +22,24 @@ struct device_node;
 extern void fsl_rstcr_restart(char *cmd);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* The different ports that the DIU can be connected to */
+enum fsl_diu_monitor_port {
+	FSL_DIU_PORT_DVI,	/* DVI */
+	FSL_DIU_PORT_LVDS,	/* Single-link LVDS */
+	FSL_DIU_PORT_DLVDS	/* Dual-link LVDS */
+};
+
 struct platform_diu_data_ops {
-	unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
-		int monitor_port);
-	void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
-	void (*set_monitor_port) (int monitor_port);
-	void (*set_pixel_clock) (unsigned int pixclock);
-	ssize_t (*show_monitor_port) (int monitor_port, char *buf);
-	int (*set_sysfs_monitor_port) (int val);
-	void (*release_bootmem) (void);
+	u32 (*get_pixel_format)(enum fsl_diu_monitor_port port,
+		unsigned int bpp);
+	void (*set_gamma_table)(enum fsl_diu_monitor_port port,
+		char *gamma_table_base);
+	void (*set_monitor_port)(enum fsl_diu_monitor_port port);
+	void (*set_pixel_clock)(unsigned int pixclock);
+	enum fsl_diu_monitor_port (*valid_monitor_port)
+		(enum fsl_diu_monitor_port port);
+	void (*release_bootmem)(void);
 };
 
 extern struct platform_diu_data_ops diu_ops;