diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-24 09:39:54 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-07-24 09:39:54 -0700 |
| commit | 759e2a253aaefbb6da9253d517a5a8fe1801ce0f (patch) | |
| tree | a94099df1b69fda8899030adf12ab88931aad822 /arch | |
| parent | 90e66dd93d53f346e6f652f6eb6512f576917ee7 (diff) | |
| parent | 719154c6d1c1a3a404f4ff570c4b36bb2ef868ca (diff) | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin
Pull blackfin changes from Bob Liu:
"The big changes are adding PM and HDMI support for bf60x, other
patches are various bug fix and code cleanup."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (48 commits)
bf60x: fix build warning
PM: add BF60x flash suspend and resume support
blackfin: twi: read twi mmr via bfin_read macro
dpm: deepsleep: reserve stack
bf60x: cpufreq: fix anomaly 05000273
bf609: add adv7511 display support
blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkit
bf60x: Add double fault, hardware error and NMI SEC handler
bf60x: update anomaly id in serial and twi driver headers.
bf60x: vs6624 pin update
bf60x: add default anomaly setting.
bf60x: update bf60x anomaly list.
bf60x: sec: Enable sec interrupt source priority configuration.
bf60x: sec: Clean up interrupt initialization code for SEC.
bf609: reuse bf5xx-i2s-pcm.c as i2s pcm driver
bf561: add capabilities in adv7183_inputs
bf609: convert vs6624 blank_clocks to black_pixels
blackfin: fix musb macro name
cleanup: sec and linkport only built on bf60x
bfin: pint: add pint suspend and resume
...
Diffstat (limited to 'arch')
38 files changed, 1298 insertions, 506 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index fef96f47876..9b765107e15 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -352,6 +352,11 @@ config MEM_MT48H32M16LFCJ_75 depends on (BFIN526_EZBRD) default y +config MEM_MT47H64M16 + bool + depends on (BFIN609_EZKIT) + default y + source "arch/blackfin/mach-bf518/Kconfig" source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" @@ -399,8 +404,9 @@ config ROM_BASE hex "Kernel ROM Base" depends on ROMKERNEL default "0x20040040" - range 0x20000000 0x20400000 if !(BF54x || BF561) + range 0x20000000 0x20400000 if !(BF54x || BF561 || BF60x) range 0x20000000 0x30000000 if (BF54x || BF561) + range 0xB0000000 0xC0000000 if (BF60x) help Make sure your ROM base does not include any file-header information that is prepended to the kernel. @@ -1009,6 +1015,12 @@ config HAVE_PWM choice prompt "Uncached DMA region" default DMA_UNCACHED_1M +config DMA_UNCACHED_32M + bool "Enable 32M DMA region" +config DMA_UNCACHED_16M + bool "Enable 16M DMA region" +config DMA_UNCACHED_8M + bool "Enable 8M DMA region" config DMA_UNCACHED_4M bool "Enable 4M DMA region" config DMA_UNCACHED_2M @@ -1038,7 +1050,7 @@ config BFIN_EXTMEM_ICACHEABLE config BFIN_L2_ICACHEABLE bool "Enable ICACHE for L2 SRAM" depends on BFIN_ICACHE - depends on BF54x || BF561 + depends on (BF54x || BF561 || BF60x) && !SMP default n config BFIN_DCACHE diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig index be9526bee4f..f4b02350e41 100644 --- a/arch/blackfin/configs/BF609-EZKIT_defconfig +++ b/arch/blackfin/configs/BF609-EZKIT_defconfig @@ -90,6 +90,7 @@ CONFIG_INPUT_BFIN_ROTARY=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_BFIN_SIMPLE_TIMER=m +# CONFIG_BFIN_CRC is not set CONFIG_BFIN_LINKPORT=y # CONFIG_DEVKMEM is not set CONFIG_SERIAL_BFIN=y @@ -153,3 +154,4 @@ CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_BFIN_CRC=y diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 608be5e6d25..dc47d79287f 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -14,7 +14,13 @@ #include <linux/linkage.h> #include <linux/types.h> -#if defined(CONFIG_DMA_UNCACHED_4M) +#if defined(CONFIG_DMA_UNCACHED_32M) +# define DMA_UNCACHED_REGION (32 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_16M) +# define DMA_UNCACHED_REGION (16 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_8M) +# define DMA_UNCACHED_REGION (8 * 1024 * 1024) +#elif defined(CONFIG_DMA_UNCACHED_4M) # define DMA_UNCACHED_REGION (4 * 1024 * 1024) #elif defined(CONFIG_DMA_UNCACHED_2M) # define DMA_UNCACHED_REGION (2 * 1024 * 1024) diff --git a/arch/blackfin/include/asm/bfin_crc.h b/arch/blackfin/include/asm/bfin_crc.h index 3deb4452cee..75cef4dc85a 100644 --- a/arch/blackfin/include/asm/bfin_crc.h +++ b/arch/blackfin/include/asm/bfin_crc.h @@ -79,20 +79,6 @@ struct crc_register { u32 revid; }; -struct bfin_crc { - struct miscdevice mdev; - struct list_head list; - int irq; - int dma_ch_src; - int dma_ch_dest; - volatile struct crc_register *regs; - struct crc_info *info; - struct mutex mutex; - struct completion c; - unsigned short opmode; - char name[20]; -}; - /* CRC_STATUS Masks */ #define CMPERR 0x00000002 /* Compare error */ #define DCNTEXP 0x00000010 /* datacnt register expired */ diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 8597158010b..2d90d62edc9 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -282,7 +282,7 @@ struct bfin_uart_regs { #define UART_GET_GCTL(p) UART_GET_CTL(p) #define UART_GET_LCR(p) UART_GET_CTL(p) #define UART_GET_MCR(p) UART_GET_CTL(p) -#if ANOMALY_05001001 +#if ANOMALY_16000030 #define UART_GET_STAT(p) \ ({ \ u32 __ret; \ diff --git a/arch/blackfin/include/asm/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h index aadfb1ad1fa..b2d5e733079 100644 --- a/arch/blackfin/include/asm/bfin_simple_timer.h +++ b/arch/blackfin/include/asm/bfin_simple_timer.h @@ -17,5 +17,11 @@ #define BFIN_SIMPLE_TIMER_START _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 6) #define BFIN_SIMPLE_TIMER_STOP _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 8) #define BFIN_SIMPLE_TIMER_READ _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 10) +#define BFIN_SIMPLE_TIMER_READ_COUNTER _IO(BFIN_SIMPLE_TIMER_IOCTL_MAGIC, 11) + +#define BFIN_SIMPLE_TIMER_MODE_PWM_ONESHOT 0 +#define BFIN_SIMPLE_TIMER_MODE_PWMOUT_CONT 1 +#define BFIN_SIMPLE_TIMER_MODE_WDTH_CAP 2 +#define BFIN_SIMPLE_TIMER_MODE_PWMOUT_CONT_NOIRQ 3 #endif diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h index 2f3339a4762..f4a07278743 100644 --- a/arch/blackfin/include/asm/bfin_twi.h +++ b/arch/blackfin/include/asm/bfin_twi.h @@ -66,9 +66,9 @@ struct bfin_twi_iface { #define DEFINE_TWI_REG(reg_name, reg) \ static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \ - { return iface->regs_base->reg; } \ + { return bfin_read16(&iface->regs_base->reg); } \ static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \ - { iface->regs_base->reg = v; } + { bfin_write16(&iface->regs_base->reg, v); } DEFINE_TWI_REG(CLKDIV, clkdiv) DEFINE_TWI_REG(CONTROL, control) @@ -84,7 +84,7 @@ DEFINE_TWI_REG(FIFO_CTL, fifo_ctl) DEFINE_TWI_REG(FIFO_STAT, fifo_stat) DEFINE_TWI_REG(XMT_DATA8, xmt_data8) DEFINE_TWI_REG(XMT_DATA16, xmt_data16) -#if !ANOMALY_05001001 +#if !ANOMALY_16000030 DEFINE_TWI_REG(RCV_DATA8, rcv_data8) DEFINE_TWI_REG(RCV_DATA16, rcv_data16) #else @@ -94,7 +94,7 @@ static inline u16 read_RCV_DATA8(struct bfin_twi_iface *iface) unsigned long flags; flags = hard_local_irq_save(); - ret = iface->regs_base->rcv_data8; + ret = bfin_read16(&iface->regs_base->rcv_data8); hard_local_irq_restore(flags); return ret; @@ -106,7 +106,7 @@ static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface) unsigned long flags; flags = hard_local_irq_save(); - ret = iface->regs_base->rcv_data16; + ret = bfin_read16(&iface->regs_base->rcv_data16); hard_local_irq_restore(flags); return ret; diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S index 1f9060395a0..507e7aa6a56 100644 --- a/arch/blackfin/include/asm/context.S +++ b/arch/blackfin/include/asm/context.S @@ -396,3 +396,12 @@ call \func; #endif .endm + +#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) +# define EX_SCRATCH_REG RETN +#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) +# define EX_SCRATCH_REG RETE +#else +# define EX_SCRATCH_REG CYCLES +#endif + diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index e91eae8330a..2673b11376f 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -280,7 +280,7 @@ PM_POP_SYNC(9) #endif -#ifdef EBIU_AMBCTL +#ifdef EBIU_AMGCTL PM_SYS_POP(9, EBIU_AMBCTL1) PM_SYS_POP(8, EBIU_AMBCTL0) PM_SYS_POP16(7, EBIU_AMGCTL) diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 3d84d96f7c2..98d0133346b 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -141,6 +141,8 @@ static inline void bfin_pm_standby_restore(void) void bfin_gpio_pm_hibernate_restore(void); void bfin_gpio_pm_hibernate_suspend(void); +void bfin_pint_suspend(void); +void bfin_pint_resume(void); # if !BFIN_GPIO_PINT int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl); diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 89de539ed01..4ae1144a457 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -20,6 +20,16 @@ /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */ #include <mach/irq.h> +/* + * pm save bfin pint registers + */ +struct bfin_pm_pint_save { + u32 mask_set; + u32 assign; + u32 edge_set; + u32 invert_set; +}; + #if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE) # define NOP_PAD_ANOMALY_05000244 "nop; nop;" #else diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 237579935e2..f019e9bcefe 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -6,6 +6,9 @@ * Licensed under the GPL-2 or later. */ +#ifndef __MEM_INIT_H__ +#define __MEM_INIT_H__ + #if defined(EBIU_SDGCTL) #if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \ defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \ @@ -277,3 +280,212 @@ #else #define PLL_BYPASS 0 #endif + +#ifdef CONFIG_BF60x + +/* DMC status bits */ +#define IDLE 0x1 +#define MEMINITDONE 0x4 +#define SRACK 0x8 +#define PDACK 0x10 +#define DPDACK 0x20 +#define DLLCALDONE 0x2000 +#define PENDREF 0xF0000 +#define PHYRDPHASE 0xF00000 +#define PHYRDPHASE_OFFSET 20 + +/* DMC control bits */ +#define LPDDR 0x2 +#define INIT 0x4 +#define SRREQ 0x8 +#define PDREQ 0x10 +#define DPDREQ 0x20 +#define PREC 0x40 +#define ADDRMODE 0x100 +#define RDTOWR 0xE00 +#define PPREF 0x1000 +#define DLLCAL 0x2000 + +/* DMC DLL control bits */ +#define DLLCALRDCNT 0xFF +#define DATACYC 0xF00 +#define DATACYC_OFFSET 8 + +/* CGU Divisor bits */ +#define CSEL_OFFSET 0 +#define S0SEL_OFFSET 5 +#define SYSSEL_OFFSET 8 +#define S1SEL_OFFSET 13 +#define DSEL_OFFSET 16 +#define OSEL_OFFSET 22 +#define ALGN 0x20000000 +#define UPDT 0x40000000 +#define LOCK 0x80000000 + +/* CGU Status bits */ +#define PLLEN 0x1 +#define PLLBP 0x2 +#define PLOCK 0x4 +#define CLKSALGN 0x8 + +/* CGU Control bits */ +#define MSEL_MASK 0x7F00 +#define DF_MASK 0x1 + +struct ddr_config { + u32 ddr_clk; + u32 dmc_ddrctl; + u32 dmc_ddrcfg; + u32 dmc_ddrtr0; + u32 dmc_ddrtr1; + u32 dmc_ddrtr2; + u32 dmc_ddrmr; + u32 dmc_ddrmr1; +}; + +#if defined(CONFIG_MEM_MT47H64M16) +static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = { + [0] = { + .ddr_clk = 125, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20705212, + .dmc_ddrtr1 = 0x201003CF, + .dmc_ddrtr2 = 0x00320107, + .dmc_ddrmr = 0x00000422, + .dmc_ddrmr1 = 0x4, + }, + [1] = { + .ddr_clk = 133, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20806313, + .dmc_ddrtr1 = 0x2013040D, + .dmc_ddrtr2 = 0x00320108, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [2] = { + .ddr_clk = 150, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x20160492, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [3] = { + .ddr_clk = 166, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x2016050E, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [4] = { + .ddr_clk = 200, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20a07323, + .dmc_ddrtr1 = 0x2016050f, + .dmc_ddrtr2 = 0x00320509, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [5] = { + .ddr_clk = 225, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x302006DB, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, + [6] = { + .ddr_clk = 250, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x3020079E, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, +}; +#endif + +static inline void dmc_enter_self_refresh(void) +{ + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ); + while (!(bfin_read_DMC0_STAT() & SRACK)) + continue; + } +} + +static inline void dmc_exit_self_refresh(void) +{ + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ); + while (bfin_read_DMC0_STAT() & SRACK) + continue; + } +} + +static inline void init_cgu(u32 cgu_div, u32 cgu_ctl) +{ + dmc_enter_self_refresh(); + + /* Don't set the same value of MSEL and DF to CGU_CTL */ + if ((bfin_read32(CGU0_CTL) & (MSEL_MASK | DF_MASK)) + != cgu_ctl) { + bfin_write32(CGU0_DIV, cgu_div); + bfin_write32(CGU0_CTL, cgu_ctl); + while ((bfin_read32(CGU0_STAT) & (CLKSALGN | PLLBP)) || + !(bfin_read32(CGU0_STAT) & PLOCK)) + continue; + } + + bfin_write32(CGU0_DIV, cgu_div | UPDT); + while (bfin_read32(CGU0_STAT) & CLKSALGN) + continue; + + dmc_exit_self_refresh(); +} + +static inline void init_dmc(u32 dmc_clk) +{ + int i, dlldatacycle, dll_ctl; + + for (i = 0; i < 7; i++) { + if (ddr_config_table[i].ddr_clk == dmc_clk) { + bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg); + bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0); + bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1); + bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2); + bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr); + bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1); + bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl); + break; + } + } + + while (!(bfin_read_DMC0_STAT() & MEMINITDONE)) + continue; + + dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET; + dll_ctl = bfin_read_DMC0_DLLCTL(); + dll_ctl &= ~DATACYC; + bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET)); + + while (!(bfin_read_DMC0_STAT() & DLLCALDONE)) + continue; +} +#endif + +#endif /*__MEM_INIT_H__*/ + diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h index 70c4e511cae..cec771b8100 100644 --- a/arch/blackfin/include/asm/traps.h +++ b/arch/blackfin/include/asm/traps.h @@ -125,5 +125,7 @@ level " for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \ level " only instructions.\n" +extern void double_fault_c(struct pt_regs *fp); + #endif /* __ASSEMBLY__ */ #endif /* _BFIN_TRAPS_H */ diff --git a/arch/blackfin/kernel/bfin_dma.c b/arch/blackfin/kernel/bfin_dma.c index c166939ffb2..4a32f2dd5dd 100644 --- a/arch/blackfin/kernel/bfin_dma.c +++ b/arch/blackfin/kernel/bfin_dma.c @@ -45,7 +45,7 @@ static int __init blackfin_dma_init(void) atomic_set(&dma_ch[i].chan_status, 0); dma_ch[i].regs = dma_io_base_addr[i]; } -#ifdef CH_MEM_STREAM3_SRC +#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x) /* Mark MEMDMA Channel 3 as requested since we're using it internally */ request_dma(CH_MEM_STREAM3_DEST, "Blackfin dma_memcpy"); request_dma(CH_MEM_STREAM3_SRC, "Blackfin dma_memcpy"); @@ -361,7 +361,7 @@ void __init early_dma_memcpy_done(void) __builtin_bfin_ssync(); } -#ifdef CH_MEM_STREAM3_SRC +#if defined(CH_MEM_STREAM3_SRC) && defined(CONFIG_BF60x) #define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S3_CONFIG #define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S3_CONFIG #define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S3_START_ADDR diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 3e366dc2d6e..34e96ce02aa 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -58,12 +58,20 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) #ifdef CONFIG_ROMKERNEL /* Cover kernel XIP flash area */ +#ifdef CONFIG_BF60x + addr = CONFIG_ROM_BASE & ~(16 * 1024 * 1024 - 1); + d_tbl[i_d].addr = addr; + d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_16MB; + i_tbl[i_i].addr = addr; + i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_16MB; +#else addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1); d_tbl[i_d].addr = addr; d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; i_tbl[i_i].addr = addr; i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; #endif +#endif /* Cover L1 memory. One 4M area for code and data each is enough. */ if (cpu == 0) { diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c index f0d1118f182..e7be6532d6a 100644 --- a/arch/blackfin/kernel/dma-mapping.c +++ b/arch/blackfin/kernel/dma-mapping.c @@ -122,12 +122,13 @@ void __dma_sync(dma_addr_t addr, size_t size, EXPORT_SYMBOL(__dma_sync); int -dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, +dma_map_sg(struct device *dev, struct scatterlist *sg_list, int nents, enum dma_data_direction direction) { + struct scatterlist *sg; int i; - for (i = 0; i < nents; i++, sg++) { + for_each_sg(sg_list, sg, nents, i) { sg->dma_address = (dma_addr_t) sg_virt(sg); __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); } @@ -136,12 +137,13 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, } EXPORT_SYMBOL(dma_map_sg); -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg_list, int nelems, enum dma_data_direction direction) { + struct scatterlist *sg; int i; - for (i = 0; i < nelems; i++, sg++) { + for_each_sg(sg_list, sg, nelems, i) { sg->dma_address = (dma_addr_t) sg_virt(sg); __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction); } diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index af732eb3a68..fc179ca0779 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -114,9 +114,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_OTG) +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#elif defined(CONFIG_USB_MUSB_HDRC) .mode = MUSB_HOST, #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 3bd75bae750..c4d07f04094 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -635,9 +635,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_USB_MUSB_OTG) +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#elif defined(CONFIG_USB_MUSB_HDRC) .mode = MUSB_HOST, #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index 35c8ced4615..be9edb28f96 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -171,6 +171,8 @@ #define MAX_BLACKFIN_GPIOS 160 #define BFIN_GPIO_PINT 1 +#define NR_PINT_SYS_IRQS 4 +#define NR_PINTS 160 #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 838978808a1..7c36777c645 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -452,18 +452,21 @@ static struct v4l2_input adv7183_inputs[] = { .name = "Composite", .type = V4L2_INPUT_TYPE_CAMERA, .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, }, { .index = 1, .name = "S-Video", .type = V4L2_INPUT_TYPE_CAMERA, .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, }, { .index = 2, .name = "Component", .type = V4L2_INPUT_TYPE_CAMERA, .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, }, }; diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig index 2cb72724377..101b33ee9bb 100644 --- a/arch/blackfin/mach-bf609/Kconfig +++ b/arch/blackfin/mach-bf609/Kconfig @@ -51,6 +51,14 @@ config PINT5_ASSIGN endmenu +config SEC_IRQ_PRIORITY_LEVELS + int "SEC interrupt priority levels" + default 7 + range 0 7 + help + Devide the total number of interrupt priority levels into sub-levels. + There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels. + endmenu endif diff --git a/arch/blackfin/mach-bf609/Makefile b/arch/blackfin/mach-bf609/Makefile index 2a27f817454..234fe1b4bb0 100644 --- a/arch/blackfin/mach-bf609/Makefile +++ b/arch/blackfin/mach-bf609/Makefile @@ -2,5 +2,5 @@ # arch/blackfin/mach-bf609/Makefile # -obj-y := dma.o clock.o -obj-$(CONFIG_PM) += pm.o hibernate.o +obj-y := dma.o clock.o ints-priority.o +obj-$(CONFIG_PM) += pm.o dpm.o diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index ac64f47217c..c2cf1ae3118 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -677,11 +677,28 @@ int bf609_nor_flash_init(struct platform_device *dev) return 0; } +void bf609_nor_flash_exit(struct platform_device *dev) +{ + const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + + peripheral_free_list(pins); + + bfin_write32(SMC_GCTL, 0); +} + static struct physmap_flash_data ezkit_flash_data = { .width = 2, .parts = ezkit_partitions, - .init = bf609_nor_flash_init, + .init = bf609_nor_flash_init, + .exit = bf609_nor_flash_exit, .nr_parts = ARRAY_SIZE(ezkit_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif }; static struct resource ezkit_flash_resource = { @@ -739,7 +756,7 @@ static struct bfin6xx_spi_chip spidev_chip_info = { }; #endif -#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) static struct platform_device bfin_i2s_pcm = { .name = "bfin-i2s-pcm-audio", .id = -1, @@ -825,6 +842,12 @@ static struct adau1761_platform_data adau1761_info = { static const unsigned short ppi_req[] = { P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, +#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE) + P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19, + P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23, +#endif P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0, }; @@ -855,7 +878,7 @@ static struct bcap_route vs6624_routes[] = { }, }; -static const unsigned vs6624_ce_pin = GPIO_PD1; +static const unsigned vs6624_ce_pin = GPIO_PE4; static struct bfin_capture_config bfin_capture_data = { .card_name = "BF609", @@ -871,7 +894,128 @@ static struct bfin_capture_config bfin_capture_data = { .ppi_info = &ppi_info, .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI | EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), - .blank_clocks = 8, + .blank_pixels = 4, +}; +#endif + +#if defined(CONFIG_VIDEO_ADV7842) \ + || defined(CONFIG_VIDEO_ADV7842_MODULE) +#include <media/adv7842.h> + +static struct v4l2_input adv7842_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_ALL, + .capabilities = V4L2_IN_CAP_STD, + }, + { + .index = 2, + .name = "Component", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + }, + { + .index = 3, + .name = "VGA", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + }, + { + .index = 4, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_CUSTOM_TIMINGS, + }, +}; + +static struct bcap_route adv7842_routes[] = { + { + .input = 3, + .output = 0, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), + }, + { + .input = 4, + .output = 0, + }, + { + .input = 2, + .output = 0, + }, + { + .input = 1, + .output = 0, + }, + { + .input = 0, + .output = 1, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC2 + | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), + }, +}; + +static struct adv7842_output_format adv7842_opf[] = { + { + .op_ch_sel = ADV7842_OP_CH_SEL_BRG, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8, + .op_656_range = 1, + .blank_data = 1, + .insert_av_codes = 1, + }, + { + .op_ch_sel = ADV7842_OP_CH_SEL_RGB, + .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16, + .op_656_range = 1, + .blank_data = 1, + }, +}; + +static struct adv7842_platform_data adv7842_data = { + .opf = adv7842_opf, + .num_opf = ARRAY_SIZE(adv7842_opf), + .ain_sel = ADV7842_AIN10_11_12_NC_SYNC_4_1, + .prim_mode = ADV7842_PRIM_MODE_SDP, + .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, + .inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO, + .i2c_sdp_io = 0x40, + .i2c_sdp = 0x41, + .i2c_cp = 0x42, + .i2c_vdp = 0x43, + .i2c_afe = 0x44, + .i2c_hdmi = 0x45, + .i2c_repeater = 0x46, + .i2c_edid = 0x47, + .i2c_infoframe = 0x48, + .i2c_cec = 0x49, + .i2c_avlink = 0x4a, + .i2c_ex = 0x26, +}; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF609", + .inputs = adv7842_inputs, + .num_inputs = ARRAY_SIZE(adv7842_inputs), + .routes = adv7842_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7842", + .addr = 0x20, + .platform_data = (void *)&adv7842_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FLDSEL + | EPPI_CTL_ACTIVE656), }; #endif @@ -883,6 +1027,80 @@ static struct platform_device bfin_capture_device = { }; #endif +#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ + || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_display.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req_disp[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req_disp, +}; + +#if defined(CONFIG_VIDEO_ADV7511) \ + || defined(CONFIG_VIDEO_ADV7511_MODULE) +#include <media/adv7511.h> + +static struct v4l2_output adv7511_outputs[] = { + { + .index = 0, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + }, +}; + +static struct disp_route adv7511_routes[] = { + { + .output = 0, + }, +}; + +static struct adv7511_platform_data adv7511_data = { + .edid_addr = 0x7e, + .i2c_ex = 0x25, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7511_outputs, + .num_outputs = ARRAY_SIZE(adv7511_outputs), + .routes = adv7511_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7511", + .addr = 0x39, + .platform_data = (void *)&adv7511_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3 + | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +static struct platform_device bfin_display_device = { + .name = "bfin_display", + .dev = { + .platform_data = &bfin_display_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CRC) #define BFIN_CRC_NAME "bfin-crc" @@ -947,6 +1165,39 @@ static struct platform_device bfin_crc1_device = { }; #endif +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) +#define BFIN_CRYPTO_CRC_NAME "bfin-hmac-crc" +#define BFIN_CRYPTO_CRC_POLY_DATA 0x5c5c5c5c + +static struct resource bfin_crypto_crc_resources[] = { + { + .start = REG_CRC0_CTL, + .end = REG_CRC0_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC0_DCNTEXP, + .end = IRQ_CRC0_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM0_SRC_CRC0, + .end = CH_MEM_STREAM0_SRC_CRC0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crypto_crc_device = { + .name = BFIN_CRYPTO_CRC_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_crypto_crc_resources), + .resource = bfin_crypto_crc_resources, + .dev = { + .platform_data = (void *)BFIN_CRYPTO_CRC_POLY_DATA, + }, +}; +#endif + #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static const struct ad7877_platform_data bfin_ad7877_ts_info = { .model = 7877, @@ -963,6 +1214,28 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB10, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PE1, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -981,10 +1254,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ + .irq = IRQ_PD9, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 2, + .chip_select = 4, }, #endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) @@ -1050,7 +1323,7 @@ static struct resource bfin_spi1_resource[] = { /* SPI controller data */ static struct bfin6xx_spi_master bf60x_spi_master_info0 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -1065,7 +1338,7 @@ static struct platform_device bf60x_spi_master0 = { }; static struct bfin6xx_spi_master bf60x_spi_master_info1 = { - .num_chipselect = 4, + .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; @@ -1146,6 +1419,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { .platform_data = (void *)&adau1761_info }, #endif +#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { @@ -1261,6 +1539,9 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_crc0_device, &bfin_crc1_device, #endif +#if defined(CONFIG_CRYPTO_DEV_BFIN_CRC) + &bfin_crypto_crc_device, +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, @@ -1269,7 +1550,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif -#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) &bfin_i2s_pcm, #endif #if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ @@ -1284,6 +1565,11 @@ static struct platform_device *ezkit_devices[] __initdata = { || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) &bfin_capture_device, #endif +#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ + || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) + &bfin_display_device, +#endif + }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 7f8f529693a..437d56c8228 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -97,9 +97,10 @@ int wait_for_pll_align(void) while (i-- && (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN)); if (bfin_read32(CGU0_STAT) & CGU0_STAT_CLKSALGN) { - printk(KERN_DEBUG "fail to align clk\n"); + printk(KERN_CRIT "fail to align clk\n"); return -1; } + return 0; } diff --git a/arch/blackfin/mach-bf609/dpm.S b/arch/blackfin/mach-bf609/dpm.S new file mode 100644 index 00000000000..54d50c689db --- /dev/null +++ b/arch/blackfin/mach-bf609/dpm.S @@ -0,0 +1,157 @@ +#include <linux/linkage.h> +#include <asm/blackfin.h> +#include <asm/dpmc.h> + +#include <asm/context.S> + +#define PM_STACK (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + +.section .l1.text +ENTRY(_enter_hibernate) + /* switch stack to L1 scratch, prepare for ddr srfr */ + P0.H = HI(PM_STACK); + P0.L = LO(PM_STACK); + SP = P0; + + call _bf609_ddr_sr; + call _bfin_hibernate_syscontrol; + + P0.H = HI(DPM0_RESTORE4); + P0.L = LO(DPM0_RESTORE4); + P1.H = _bf609_pm_data; + P1.L = _bf609_pm_data; + [P0] = P1; + + P0.H = HI(DPM0_CTL); + P0.L = LO(DPM0_CTL); + R3.H = HI(0x00000010); + R3.L = LO(0x00000010); + + bfin_init_pm_bench_cycles; + + [P0] = R3; + + SSYNC; +ENDPROC(_enter_hibernate) + +/* DPM wake up interrupt won't wake up core on bf60x if its core IMASK + * is disabled. This behavior differ from bf5xx serial processor. + */ +ENTRY(_dummy_deepsleep) + [--sp] = SYSCFG; + [--sp] = (R7:0,P5:0); + cli r0; + + /* get wake up interrupt ID */ + P0.l = LO(SEC_SCI_BASE + SEC_CSID); + P0.h = HI(SEC_SCI_BASE + SEC_CSID); + R0 = [P0]; + + /* ACK wake up interrupt in SEC */ + P1.l = LO(SEC_END); + P1.h = HI(SEC_END); + + [P1] = R0; + SSYNC; + + /* restore EVT 11 entry */ + p0.h = hi(EVT11); + p0.l = lo(EVT11); + p1.h = _evt_evt11; + p1.l = _evt_evt11; + + [p0] = p1; + SSYNC; + + (R7:0,P5:0) = [sp++]; + SYSCFG = [sp++]; + RTI; +ENDPROC(_dummy_deepsleep) + +ENTRY(_enter_deepsleep) + LINK 0xC; + [--sp] = (R7:0,P5:0); + + /* Change EVT 11 entry to dummy handler for wake up event */ + p0.h = hi(EVT11); + p0.l = lo(EVT11); + p1.h = _dummy_deepsleep; + p1.l = _dummy_deepsleep; + + [p0] = p1; + + P0.H = HI(PM_STACK); + P0.L = LO(PM_STACK); + + EX_SCRATCH_REG = SP; + SP = P0; + + SSYNC; + + /* should put ddr to self refresh mode before sleep */ + call _bf609_ddr_sr; + + /* Set DPM controller to deep sleep mode */ + P0.H = HI(DPM0_CTL); + P0.L = LO(DPM0_CTL); + R3.H = HI(0x00000008); + R3.L = LO(0x00000008); + [P0] = R3; + CSYNC; + + /* Enable evt 11 in IMASK before idle, otherwise core doesn't wake up. */ + r0.l = 0x800; + r0.h = 0; + sti r0; + SSYNC; + + bfin_init_pm_bench_cycles; + + /* Fall into deep sleep in idle*/ + idle; + SSYNC; + + /* Restore PLL after wake up from deep sleep */ + call _bf609_resume_ccbuf; + + /* turn ddr out of self refresh mode */ + call _bf609_ddr_sr_exit; + + SP = EX_SCRATCH_REG; + + (R7:0,P5:0) = [SP++]; + UNLINK; + RTS; +ENDPROC(_enter_deepsleep) + +.section .text +ENTRY(_bf609_hibernate) + bfin_cpu_reg_save; + bfin_core_mmr_save; + + P0.H = _bf609_pm_data; + P0.L = _bf609_pm_data; + R1.H = 0xDEAD; + R1.L = 0xBEEF; + R2.H = .Lpm_resume_here; + R2.L = .Lpm_resume_here; + [P0++] = R1; + [P0++] = R2; + [P0++] = SP; + + P1.H = _enter_hibernate; + P1.L = _enter_hibernate; + + call (P1); +.Lpm_resume_here: + + bfin_core_mmr_restore; + bfin_cpu_reg_restore; + + [--sp] = RETI; /* Clear Global Interrupt Disable */ + SP += 4; + + RTS; + +ENDPROC(_bf609_hibernate) + diff --git a/arch/blackfin/mach-bf609/hibernate.S b/arch/blackfin/mach-bf609/hibernate.S deleted file mode 100644 index d37a532519c..00000000000 --- a/arch/blackfin/mach-bf609/hibernate.S +++ /dev/null @@ -1,65 +0,0 @@ -#include <linux/linkage.h> -#include <asm/blackfin.h> -#include <asm/dpmc.h> - -#define PM_STACK (COREA_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) - -.section .l1.text -ENTRY(_enter_hibernate) - /* switch stack to L1 scratch, prepare for ddr srfr */ - P0.H = HI(PM_STACK); - P0.L = LO(PM_STACK); - SP = P0; - - call _bf609_ddr_sr; - call _bfin_hibernate_syscontrol; - - P0.H = HI(DPM0_RESTORE4); - P0.L = LO(DPM0_RESTORE4); - P1.H = _bf609_pm_data; - P1.L = _bf609_pm_data; - [P0] = P1; - - P0.H = HI(DPM0_CTL); - P0.L = LO(DPM0_CTL); - R3.H = HI(0x00000010); - R3.L = LO(0x00000010); - - bfin_init_pm_bench_cycles; - - [P0] = R3; - - SSYNC; -ENDPROC(_enter_hibernate_mode) - -.section .text -ENTRY(_bf609_hibernate) - bfin_cpu_reg_save; - bfin_core_mmr_save; - - P0.H = _bf609_pm_data; - P0.L = _bf609_pm_data; - R1.H = 0xDEAD; - R1.L = 0xBEEF; - R2.H = .Lpm_resume_here; - R2.L = .Lpm_resume_here; - [P0++] = R1; - [P0++] = R2; - [P0++] = SP; - - P1.H = _enter_hibernate; - P1.L = _enter_hibernate; - - call (P1); -.Lpm_resume_here: - - bfin_core_mmr_restore; - bfin_cpu_reg_restore; - - [--sp] = RETI; /* Clear Global Interrupt Disable */ - SP += 4; - - RTS; - -ENDPROC(_bf609_hibernate) - diff --git a/arch/blackfin/mach-bf609/include/mach/anomaly.h b/arch/blackfin/mach-bf609/include/mach/anomaly.h index bdd39aefb56..7a07374308a 100644 --- a/arch/blackfin/mach-bf609/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf609/include/mach/anomaly.h @@ -5,126 +5,99 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2011 Analog Devices Inc. + * Copyright 2004-2012 Analog Devices Inc. * Licensed under the Clear BSD license. */ /* This file should be up to date with: + * - Revision A, 15/06/2012; ADSP-BF609 Blackfin Processor Anomaly List */ #if __SILICON_REVISION__ < 0 -# error will not work on BF506 silicon version +# error will not work on BF609 silicon version #endif #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ -#define ANOMALY_05000074 (1) -/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) -/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ -#define ANOMALY_05000122 (1) -/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ -#define ANOMALY_05000245 (1) -/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ -#define ANOMALY_05000254 (1) -/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ -#define ANOMALY_05000265 (1) -/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ -#define ANOMALY_05000310 (1) -/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ -#define ANOMALY_05000366 (1) -/* Speculative Fetches Can Cause Undesired External FIFO Operations */ -#define ANOMALY_05000416 (1) -/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ -#define ANOMALY_05000426 (1) +/* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */ +#define ANOMALY_16000003 (1) +/* The EPPI Data Enable (DEN) Signal is Not Functional */ +#define ANOMALY_16000004 (1) +/* Using L1 Instruction Cache with Parity Enabled is Unreliable */ +#define ANOMALY_16000005 (1) +/* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */ +#define ANOMALY_16000006 (1) +/* DDR2 Memory Reads May Fail Intermittently */ +#define ANOMALY_16000007 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ +#define ANOMALY_16000008 (1) +/* TestSET Instruction Cannot Be Interrupted */ +#define ANOMALY_16000009 (1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ -#define ANOMALY_05000443 (1) -/* UART IrDA Receiver Fails on Extended Bit Pulses */ -#define ANOMALY_05000447 (1) +#define ANOMALY_16000010 (1) /* False Hardware Error when RETI Points to Invalid Memory */ -#define ANOMALY_05000461 (1) -/* PLL Latches Incorrect Settings During Reset */ -#define ANOMALY_05000469 (1) -/* Incorrect Default MSEL Value in PLL_CTL */ -#define ANOMALY_05000472 (1) -/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ -#define ANOMALY_05000473 (1) -/* TESTSET Instruction Cannot Be Interrupted */ -#define ANOMALY_05000477 (1) -/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ -#define ANOMALY_05000481 (1) -/* IFLUSH sucks at life */ -#define ANOMALY_05000491 (1) -/* Tempopary anomaly ID for data loss in MMR read operation if interrupted */ -#define ANOMALY_05001001 (__SILICON_REVISION__ < 1) +#define ANOMALY_16000011 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_16000012 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_16000013 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_16000014 (1) +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_16000015 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_16000017 (1) +/* RSI Boot Cleanup Routine Does Not Clear Registers */ +#define ANOMALY_16000018 (1) +/* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */ +#define ANOMALY_16000019 (1) +/* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */ +#define ANOMALY_16000020 (1) +/* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hibernate/Wakeup Sequence */ +#define ANOMALY_16000021 (1) +/* Boot Code Fails to Enable Parity Fault Detection */ +#define ANOMALY_16000022 (1) +/* USB DMA interrupt status do not show the DMA channel interrupt in the DMA ISR */ +#define ANOMALY_16000027 (1) +/* Interrupted Core Reads of MMRs May Cause Data Loss */ +#define ANOMALY_16000030 (1) /* Anomalies that don't exist on this proc */ -#define ANOMALY_05000099 (0) -#define ANOMALY_05000120 (0) -#define ANOMALY_05000125 (0) -#define ANOMALY_05000149 (0) #define ANOMALY_05000158 (0) -#define ANOMALY_05000171 (0) -#define ANOMALY_05000179 (0) -#define ANOMALY_05000182 (0) -#define ANOMALY_05000183 (0) #define ANOMALY_05000189 (0) #define ANOMALY_05000198 (0) -#define ANOMALY_05000202 (0) -#define ANOMALY_05000215 (0) -#define ANOMALY_05000219 (0) #define ANOMALY_05000220 (0) -#define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) -#define ANOMALY_05000233 (0) -#define ANOMALY_05000234 (0) -#define ANOMALY_05000242 (0) #define ANOMALY_05000244 (0) -#define ANOMALY_05000248 (0) -#define ANOMALY_05000250 (0) -#define ANOMALY_05000257 (0) -#define ANOMALY_05000261 (0) #define ANOMALY_05000263 (0) -#define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000274 (0) #define ANOMALY_05000278 (0) #define ANOMALY_05000281 (0) -#define ANOMALY_05000283 (0) -#define ANOMALY_05000285 (0) #define ANOMALY_05000287 (0) -#define ANOMALY_05000301 (0) -#define ANOMALY_05000305 (0) -#define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) -#define ANOMALY_05000315 (0) #define ANOMALY_05000323 (0) -#define ANOMALY_05000353 (1) -#define ANOMALY_05000357 (0) -#define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) -#define ANOMALY_05000364 (0) -#define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) -#define ANOMALY_05000386 (0) -#define ANOMALY_05000389 (0) -#define ANOMALY_05000400 (0) -#define ANOMALY_05000402 (0) -#define ANOMALY_05000412 (0) -#define ANOMALY_05000432 (0) -#define ANOMALY_05000440 (0) #define ANOMALY_05000448 (0) -#define ANOMALY_05000456 (0) #define ANOMALY_05000450 (0) -#define ANOMALY_05000465 (0) -#define ANOMALY_05000467 (0) -#define ANOMALY_05000474 (0) -#define ANOMALY_05000475 (0) +#define ANOMALY_05000456 (0) #define ANOMALY_05000480 (0) -#define ANOMALY_05000485 (0) +#define ANOMALY_05000481 (1) + +/* Reuse BF5xx anomalies IDs for the same anomaly in BF60x */ +#define ANOMALY_05000491 ANOMALY_16000008 +#define ANOMALY_05000477 ANOMALY_16000009 +#define ANOMALY_05000443 ANOMALY_16000010 +#define ANOMALY_05000461 ANOMALY_16000011 +#define ANOMALY_05000426 ANOMALY_16000012 +#define ANOMALY_05000310 ANOMALY_16000013 +#define ANOMALY_05000245 ANOMALY_16000014 +#define ANOMALY_05000074 ANOMALY_16000015 +#define ANOMALY_05000416 ANOMALY_16000017 + #endif diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h index 6aac38544cc..f1a6afae1a7 100644 --- a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h +++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h @@ -2665,7 +2665,6 @@ #define DEVSZ_1G 0x400 /* DMC External Bank Size = 1Gbit */ #define DEVSZ_2G 0x500 /* DMC External Bank Size = 2Gbit */ - /* ========================= L2CTL Registers ========================= */ diff --git a/arch/blackfin/mach-bf609/include/mach/gpio.h b/arch/blackfin/mach-bf609/include/mach/gpio.h index 127586b1e04..c32c8cc8db2 100644 --- a/arch/blackfin/mach-bf609/include/mach/gpio.h +++ b/arch/blackfin/mach-bf609/include/mach/gpio.h @@ -123,6 +123,8 @@ #define BFIN_GPIO_PINT 1 +#define NR_PINT_SYS_IRQS 6 +#define NR_PINTS 112 #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/mach-bf609/include/mach/irq.h b/arch/blackfin/mach-bf609/include/mach/irq.h index 0004552433b..23e74cdeeee 100644 --- a/arch/blackfin/mach-bf609/include/mach/irq.h +++ b/arch/blackfin/mach-bf609/include/mach/irq.h @@ -293,9 +293,13 @@ #define NR_MACH_IRQS (IRQ_PG15 + 1) +#define SEC_SCTL_PRIO_OFFSET 8 + #ifndef __ASSEMBLY__ #include <linux/types.h> +extern u8 sec_int_priority[]; + /* * bfin pint registers layout */ diff --git a/arch/blackfin/mach-bf609/include/mach/pm.h b/arch/blackfin/mach-bf609/include/mach/pm.h index 036d9bdc889..3ca0fb96563 100644 --- a/arch/blackfin/mach-bf609/include/mach/pm.h +++ b/arch/blackfin/mach-bf609/include/mach/pm.h @@ -11,11 +11,14 @@ #include <linux/suspend.h> -int bfin609_pm_enter(suspend_state_t state); -int bf609_pm_prepare(void); -void bf609_pm_finish(void); +extern int bfin609_pm_enter(suspend_state_t state); +extern int bf609_pm_prepare(void); +extern void bf609_pm_finish(void); void bf609_hibernate(void); void bfin_sec_raise_irq(unsigned int sid); void coreb_enable(void); + +int bf609_nor_flash_init(void); +void bf609_nor_flash_exit(void); #endif diff --git a/arch/blackfin/mach-bf609/ints-priority.c b/arch/blackfin/mach-bf609/ints-priority.c new file mode 100644 index 00000000000..f68abb9aa79 --- /dev/null +++ b/arch/blackfin/mach-bf609/ints-priority.c @@ -0,0 +1,156 @@ +/* + * Copyright 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + * + * Set up the interrupt priorities + */ + +#include <linux/module.h> +#include <linux/irq.h> +#include <asm/blackfin.h> + +u8 sec_int_priority[] = { + 255, /* IRQ_SEC_ERR */ + 255, /* IRQ_CGU_EVT */ + 254, /* IRQ_WATCH0 */ + 254, /* IRQ_WATCH1 */ + 253, /* IRQ_L2CTL0_ECC_ERR */ + 253, /* IRQ_L2CTL0_ECC_WARN */ + 253, /* IRQ_C0_DBL_FAULT */ + 253, /* IRQ_C1_DBL_FAULT */ + 252, /* IRQ_C0_HW_ERR */ + 252, /* IRQ_C1_HW_ERR */ + 255, /* IRQ_C0_NMI_L1_PARITY_ERR */ + 255, /* IRQ_C1_NMI_L1_PARITY_ERR */ + + 50, /* IRQ_TIMER0 */ + 50, /* IRQ_TIMER1 */ + 50, /* IRQ_TIMER2 */ + 50, /* IRQ_TIMER3 */ + 50, /* IRQ_TIMER4 */ + 50, /* IRQ_TIMER5 */ + 50, /* IRQ_TIMER6 */ + 50, /* IRQ_TIMER7 */ + 50, /* IRQ_TIMER_STAT */ + 0, /* IRQ_PINT0 */ + 0, /* IRQ_PINT1 */ + 0, /* IRQ_PINT2 */ + 0, /* IRQ_PINT3 */ + 0, /* IRQ_PINT4 */ + 0, /* IRQ_PINT5 */ + 0, /* IRQ_CNT */ + 50, /* RQ_PWM0_TRIP */ + 50, /* IRQ_PWM0_SYNC */ + 50, /* IRQ_PWM1_TRIP */ + 50, /* IRQ_PWM1_SYNC */ + 0, /* IRQ_TWI0 */ + 0, /* IRQ_TWI1 */ + 10, /* IRQ_SOFT0 */ + 10, /* IRQ_SOFT1 */ + 10, /* IRQ_SOFT2 */ + 10, /* IRQ_SOFT3 */ + 0, /* IRQ_ACM_EVT_MISS */ + 0, /* IRQ_ACM_EVT_COMPLETE */ + 0, /* IRQ_CAN0_RX */ + 0, /* IRQ_CAN0_TX */ + 0, /* IRQ_CAN0_STAT */ + 100, /* IRQ_SPORT0_TX */ + 100, /* IRQ_SPORT0_TX_STAT */ + 100, /* IRQ_SPORT0_RX */ + 100, /* IRQ_SPORT0_RX_STAT */ + 100, /* IRQ_SPORT1_TX */ + 100, /* IRQ_SPORT1_TX_STAT */ + 100, /* IRQ_SPORT1_RX */ + 100, /* IRQ_SPORT1_RX_STAT */ + 100, /* IRQ_SPORT2_TX */ + 100, /* IRQ_SPORT2_TX_STAT */ + 100, /* IRQ_SPORT2_RX */ + 100, /* IRQ_SPORT2_RX_STAT */ + 0, /* IRQ_SPI0_TX */ + 0, /* IRQ_SPI0_RX */ + 0, /* IRQ_SPI0_STAT */ + 0, /* IRQ_SPI1_TX */ + 0, /* IRQ_SPI1_RX */ + 0, /* IRQ_SPI1_STAT */ + 0, /* IRQ_RSI */ + 0, /* IRQ_RSI_INT0 */ + 0, /* IRQ_RSI_INT1 */ + 0, /* DMA11 Data (SDU) */ + 0, /* DMA12 Data (Reserved) */ + 0, /* Reserved */ + 0, /* Reserved */ + 30, /* IRQ_EMAC0_STAT */ + 0, /* EMAC0 Power (Reserved) */ + 30, /* IRQ_EMAC1_STAT */ + 0, /* EMAC1 Power (Reserved) */ + 0, /* IRQ_LP0 */ + 0, /* IRQ_LP0_STAT */ + 0, /* IRQ_LP1 */ + 0, /* IRQ_LP1_STAT */ + 0, /* IRQ_LP2 */ + 0, /* IRQ_LP2_STAT */ + 0, /* IRQ_LP3 */ + 0, /* IRQ_LP3_STAT */ + 0, /* IRQ_UART0_TX */ + 0, /* IRQ_UART0_RX */ + 0, /* IRQ_UART0_STAT */ + 0, /* IRQ_UART1_TX */ + 0, /* IRQ_UART1_RX */ + 0, /* IRQ_UART1_STAT */ + 0, /* IRQ_MDMA0_SRC_CRC0 */ + 0, /* IRQ_MDMA0_DEST_CRC0 */ + 0, /* IRQ_CRC0_DCNTEXP */ + 0, /* IRQ_CRC0_ERR */ + 0, /* IRQ_MDMA1_SRC_CRC1 */ + 0, /* IRQ_MDMA1_DEST_CRC1 */ + 0, /* IRQ_CRC1_DCNTEXP */ + 0, /* IRQ_CRC1_ERR */ + 0, /* IRQ_MDMA2_SRC */ + 0, /* IRQ_MDMA2_DEST */ + 0, /* IRQ_MDMA3_SRC */ + 0, /* IRQ_MDMA3_DEST */ + 120, /* IRQ_EPPI0_CH0 */ + 120, /* IRQ_EPPI0_CH1 */ + 120, /* IRQ_EPPI0_STAT */ + 120, /* IRQ_EPPI2_CH0 */ + 120, /* IRQ_EPPI2_CH1 */ + 120, /* IRQ_EPPI2_STAT */ + 120, /* IRQ_EPPI1_CH0 */ + 120, /* IRQ_EPPI1_CH1 */ + 120, /* IRQ_EPPI1_STAT */ + 120, /* IRQ_PIXC_CH0 */ + 120, /* IRQ_PIXC_CH1 */ + 120, /* IRQ_PIXC_CH2 */ + 120, /* IRQ_PIXC_STAT */ + 120, /* IRQ_PVP_CPDOB */ + 120, /* IRQ_PVP_CPDOC */ + 120, /* IRQ_PVP_CPSTAT */ + 120, /* IRQ_PVP_CPCI */ + 120, /* IRQ_PVP_STAT0 */ + 120, /* IRQ_PVP_MPDO */ + 120, /* IRQ_PVP_MPDI */ + 120, /* IRQ_PVP_MPSTAT */ + 120, /* IRQ_PVP_MPCI */ + 120, /* IRQ_PVP_CPDOA */ + 120, /* IRQ_PVP_STAT1 */ + 0, /* IRQ_USB_STAT */ + 0, /* IRQ_USB_DMA */ + 0, /* IRQ_TRU_INT0 */ + 0, /* IRQ_TRU_INT1 */ + 0, /* IRQ_TRU_INT2 */ + 0, /* IRQ_TRU_INT3 */ + 0, /* IRQ_DMAC0_ERROR */ + 0, /* IRQ_CGU0_ERROR */ + 0, /* Reserved */ + 0, /* IRQ_DPM */ + 0, /* Reserved */ + 0, /* IRQ_SWU0 */ + 0, /* IRQ_SWU1 */ + 0, /* IRQ_SWU2 */ + 0, /* IRQ_SWU3 */ + 0, /* IRQ_SWU4 */ + 0, /* IRQ_SWU4 */ + 0, /* IRQ_SWU6 */ +}; + diff --git a/arch/blackfin/mach-bf609/pm.c b/arch/blackfin/mach-bf609/pm.c index b76966eb16a..dacafc163f7 100644 --- a/arch/blackfin/mach-bf609/pm.c +++ b/arch/blackfin/mach-bf609/pm.c @@ -11,13 +11,14 @@ #include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/irq.h> - #include <linux/delay.h> +#include <linux/syscore_ops.h> #include <asm/dpmc.h> #include <asm/pm.h> #include <mach/pm.h> #include <asm/blackfin.h> +#include <asm/mem_init.h> /***********************************************************/ /* */ @@ -132,60 +133,30 @@ void bfin_cpu_suspend(void) } __attribute__((l1_text)) -void bfin_deepsleep(unsigned long mask) +void bf609_ddr_sr(void) { - uint32_t dpm0_ctl; - - bfin_write32(DPM0_WAKE_EN, 0x10); - bfin_write32(DPM0_WAKE_POL, 0x10); - dpm0_ctl = 0x00000008; - bfin_write32(DPM0_CTL, dpm0_ctl); - SSYNC(); - __asm__ __volatile__( \ - ".align 8;" \ - "idle;" \ - : : \ - ); -#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH - __asm__ __volatile__( - "R0 = 0;" - "CYCLES = R0;" - "CYCLES2 = R0;" - "R0 = SYSCFG;" - "BITSET(R0, 1);" - "SYSCFG = R0;" - : : : "R0" - ); -#endif - + dmc_enter_self_refresh(); } __attribute__((l1_text)) -void bf609_ddr_sr(void) +void bf609_ddr_sr_exit(void) { - uint32_t reg; - - reg = bfin_read_DMC0_CTL(); - reg |= 0x8; - bfin_write_DMC0_CTL(reg); + dmc_exit_self_refresh(); - while (!(bfin_read_DMC0_STAT() & 0x8)) + /* After wake up from deep sleep and exit DDR from self refress mode, + * should wait till CGU PLL is locked. + */ + while (bfin_read32(CGU0_STAT) & CLKSALGN) continue; } __attribute__((l1_text)) -void bf609_ddr_sr_exit(void) +void bf609_resume_ccbuf(void) { - uint32_t reg; - while (!(bfin_read_DMC0_STAT() & 0x1)) - continue; + bfin_write32(DPM0_CCBF_EN, 3); + bfin_write32(DPM0_CTL, 2); - reg = bfin_read_DMC0_CTL(); - reg &= ~0x8; - bfin_write_DMC0_CTL(reg); - - while ((bfin_read_DMC0_STAT() & 0x8)) - continue; + while ((bfin_read32(DPM0_STAT) & 0xf) != 1); } __attribute__((l1_text)) @@ -203,20 +174,25 @@ void bfin_hibernate_syscontrol(void) bfin_write32(DPM0_RESTORE5, bfin_read32(DPM0_RESTORE5) | 4); } -#ifndef CONFIG_BF60x -# define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) -#else -# define SIC_SYSIRQ(irq) ((irq) - IVG15) -#endif -void bfin_hibernate(unsigned long mask) +#define IRQ_SID(irq) ((irq) - IVG15) +asmlinkage void enter_deepsleep(void); + +__attribute__((l1_text)) +void bfin_deepsleep(unsigned long mask, unsigned long pol_mask) { - bfin_write32(DPM0_WAKE_EN, 0x10); - bfin_write32(DPM0_WAKE_POL, 0x10); + bfin_write32(DPM0_WAKE_EN, mask); + bfin_write32(DPM0_WAKE_POL, pol_mask); + SSYNC(); + enter_deepsleep(); +} + +void bfin_hibernate(unsigned long mask, unsigned long pol_mask) +{ + bfin_write32(DPM0_WAKE_EN, mask); + bfin_write32(DPM0_WAKE_POL, pol_mask); bfin_write32(DPM0_PGCNTR, 0x0000FFFF); bfin_write32(DPM0_HIB_DIS, 0xFFFF); - printk(KERN_DEBUG "hibernate: restore %x pgcnt %x\n", bfin_read32(DPM0_RESTORE0), bfin_read32(DPM0_PGCNTR)); - bf609_hibernate(); } @@ -290,10 +266,11 @@ void bf609_cpu_pm_enter(suspend_state_t state) printk(KERN_DEBUG "Unable to get irq wake\n"); if (state == PM_SUSPEND_STANDBY) - bfin_deepsleep(wakeup); + bfin_deepsleep(wakeup, wakeup_pol); else { - bfin_hibernate(wakeup); + bfin_hibernate(wakeup, wakeup_pol); } + } int bf609_cpu_pm_prepare(void) @@ -312,20 +289,36 @@ static struct bfin_cpu_pm_fns bf609_cpu_pm = { .finish = bf609_cpu_pm_finish, }; +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static int smc_pm_syscore_suspend(void) +{ + bf609_nor_flash_exit(); + return 0; +} + +static void smc_pm_syscore_resume(void) +{ + bf609_nor_flash_init(); +} + +static struct syscore_ops smc_pm_syscore_ops = { + .suspend = smc_pm_syscore_suspend, + .resume = smc_pm_syscore_resume, +}; +#endif + static irqreturn_t test_isr(int irq, void *dev_id) { printk(KERN_DEBUG "gpio irq %d\n", irq); + if (irq == 231) + bfin_sec_raise_irq(IRQ_SID(IRQ_SOFT1)); return IRQ_HANDLED; } static irqreturn_t dpm0_isr(int irq, void *dev_id) { - uint32_t wake_stat; - - wake_stat = bfin_read32(DPM0_WAKE_STAT); - printk(KERN_DEBUG "enter %s wake stat %08x\n", __func__, wake_stat); - - bfin_write32(DPM0_WAKE_STAT, wake_stat); + bfin_write32(DPM0_WAKE_STAT, bfin_read32(DPM0_WAKE_STAT)); + bfin_write32(CGU0_STAT, bfin_read32(CGU0_STAT)); return IRQ_HANDLED; } @@ -334,7 +327,11 @@ static int __init bf609_init_pm(void) int irq; int error; -#if CONFIG_PM_BFIN_WAKE_PE12 +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + register_syscore_ops(&smc_pm_syscore_ops); +#endif + +#ifdef CONFIG_PM_BFIN_WAKE_PE12 irq = gpio_to_irq(GPIO_PE12); if (irq < 0) { error = irq; @@ -342,16 +339,19 @@ static int __init bf609_init_pm(void) GPIO_PE12, error); } - error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND, "gpiope12", NULL); + error = request_irq(irq, test_isr, IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND + | IRQF_FORCE_RESUME, "gpiope12", NULL); if(error < 0) printk(KERN_DEBUG "Unable to get irq\n"); #endif - error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND, "cgu0 event", NULL); + error = request_irq(IRQ_CGU_EVT, dpm0_isr, IRQF_NO_SUSPEND | + IRQF_FORCE_RESUME, "cgu0 event", NULL); if(error < 0) printk(KERN_DEBUG "Unable to get irq\n"); - error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND, "dpm0 event", NULL); + error = request_irq(IRQ_DPM, dpm0_isr, IRQF_NO_SUSPEND | + IRQF_FORCE_RESUME, "dpm0 event", NULL); if (error < 0) printk(KERN_DEBUG "Unable to get irq\n"); diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 7ad2407d157..2308ce52f84 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -16,23 +16,14 @@ #include <asm/dpmc.h> #ifdef CONFIG_BF60x -#define CSEL_P 0 -#define S0SEL_P 5 -#define SYSSEL_P 8 -#define S1SEL_P 13 -#define DSEL_P 16 -#define OSEL_P 22 -#define ALGN_P 29 -#define UPDT_P 30 -#define LOCK_P 31 #define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF) #define CGU_DIV_VAL \ - ((CONFIG_CCLK_DIV << CSEL_P) | \ - (CONFIG_SCLK_DIV << SYSSEL_P) | \ - (CONFIG_SCLK0_DIV << S0SEL_P) | \ - (CONFIG_SCLK1_DIV << S1SEL_P) | \ - (CONFIG_DCLK_DIV << DSEL_P)) + ((CONFIG_CCLK_DIV << CSEL_OFFSET) | \ + (CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \ + (CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \ + (CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \ + (CONFIG_DCLK_DIV << DSEL_OFFSET)) #define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000) #if ((CONFIG_BFIN_DCLK != 125) && \ @@ -41,89 +32,7 @@ (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250)) #error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" #endif -struct ddr_config { - u32 ddr_clk; - u32 dmc_ddrctl; - u32 dmc_ddrcfg; - u32 dmc_ddrtr0; - u32 dmc_ddrtr1; - u32 dmc_ddrtr2; - u32 dmc_ddrmr; - u32 dmc_ddrmr1; -}; -struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = { - [0] = { - .ddr_clk = 125, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20705212, - .dmc_ddrtr1 = 0x201003CF, - .dmc_ddrtr2 = 0x00320107, - .dmc_ddrmr = 0x00000422, - .dmc_ddrmr1 = 0x4, - }, - [1] = { - .ddr_clk = 133, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20806313, - .dmc_ddrtr1 = 0x2013040D, - .dmc_ddrtr2 = 0x00320108, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [2] = { - .ddr_clk = 150, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20A07323, - .dmc_ddrtr1 = 0x20160492, - .dmc_ddrtr2 = 0x00320209, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [3] = { - .ddr_clk = 166, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20A07323, - .dmc_ddrtr1 = 0x2016050E, - .dmc_ddrtr2 = 0x00320209, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [4] = { - .ddr_clk = 200, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20a07323, - .dmc_ddrtr1 = 0x2016050f, - .dmc_ddrtr2 = 0x00320509, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [5] = { - .ddr_clk = 225, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20E0A424, - .dmc_ddrtr1 = 0x302006DB, - .dmc_ddrtr2 = 0x0032020D, - .dmc_ddrmr = 0x00000842, - .dmc_ddrmr1 = 0x4, - }, - [6] = { - .ddr_clk = 250, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20E0A424, - .dmc_ddrtr1 = 0x3020079E, - .dmc_ddrtr2 = 0x0032020D, - .dmc_ddrmr = 0x00000842, - .dmc_ddrmr1 = 0x4, - }, -}; #else #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ @@ -144,43 +53,9 @@ void init_clocks(void) * in the middle of reprogramming things, and that'll screw us up. * For example, any automatic DMAs left by U-Boot for splash screens. */ - #ifdef CONFIG_BF60x - int i, dlldatacycle, dll_ctl; - bfin_write32(CGU0_DIV, CGU_DIV_VAL); - bfin_write32(CGU0_CTL, CGU_CTL_VAL); - while ((bfin_read32(CGU0_STAT) & 0x8) || !(bfin_read32(CGU0_STAT) & 0x4)) - continue; - - bfin_write32(CGU0_DIV, CGU_DIV_VAL | (1 << UPDT_P)); - while (bfin_read32(CGU0_STAT) & (1 << 3)) - continue; - - for (i = 0; i < 7; i++) { - if (ddr_config_table[i].ddr_clk == CONFIG_BFIN_DCLK) { - bfin_write_DDR0_CFG(ddr_config_table[i].dmc_ddrcfg); - bfin_write_DDR0_TR0(ddr_config_table[i].dmc_ddrtr0); - bfin_write_DDR0_TR1(ddr_config_table[i].dmc_ddrtr1); - bfin_write_DDR0_TR2(ddr_config_table[i].dmc_ddrtr2); - bfin_write_DDR0_MR(ddr_config_table[i].dmc_ddrmr); - bfin_write_DDR0_EMR1(ddr_config_table[i].dmc_ddrmr1); - bfin_write_DDR0_CTL(ddr_config_table[i].dmc_ddrctl); - break; - } - } - - do_sync(); - while (!(bfin_read_DDR0_STAT() & 0x4)) - continue; - - dlldatacycle = (bfin_read_DDR0_STAT() & 0x00f00000) >> 20; - dll_ctl = bfin_read_DDR0_DLLCTL(); - dll_ctl &= 0x0ff; - bfin_write_DDR0_DLLCTL(dll_ctl | (dlldatacycle << 8)); - - do_sync(); - while (!(bfin_read_DDR0_STAT() & 0x2000)) - continue; + init_cgu(CGU_DIV_VAL, CGU_CTL_VAL); + init_dmc(CONFIG_BFIN_DCLK); #else size_t i; for (i = 0; i < MAX_DMA_CHANNELS; ++i) { diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index 6e87dc13f6b..c854a27cbea 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -64,7 +64,8 @@ static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ #if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) + (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ + && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) min_cclk = sclk * 2; #else min_cclk = sclk; @@ -173,7 +174,7 @@ static int bfin_target(struct cpufreq_policy *poli, #else ret = cpu_set_cclk(cpu, freqs.new * 1000); if (ret != 0) { - pr_debug("cpufreq set freq failed %d\n", ret); + WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); break; } #endif diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 04c2fbe41a7..1c3d2c5bb0b 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -25,13 +25,6 @@ #include <asm/context.S> -#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) -# define EX_SCRATCH_REG RETN -#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) -# define EX_SCRATCH_REG RETE -#else -# define EX_SCRATCH_REG CYCLES -#endif #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 2729cba715b..7ca09ec2ca5 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -26,8 +26,9 @@ #include <asm/gpio.h> #include <asm/irq_handler.h> #include <asm/dpmc.h> +#include <asm/traps.h> -#ifndef CONFIG_BF60x +#ifndef SEC_GCTL # define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) #else # define SIC_SYSIRQ(irq) ((irq) - IVG15) @@ -56,7 +57,7 @@ unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ unsigned vr_wakeup; #endif -#ifndef CONFIG_BF60x +#ifndef SEC_GCTL static struct ivgx { /* irq number for request_irq, available in mach-bf5xx/irq.h */ unsigned int irqno; @@ -143,7 +144,7 @@ static void bfin_core_unmask_irq(struct irq_data *d) void bfin_internal_mask_irq(unsigned int irq) { unsigned long flags = hard_local_irq_save(); -#ifndef CONFIG_BF60x +#ifndef SEC_GCTL #ifdef SIC_IMASK0 unsigned mask_bank = SIC_SYSIRQ(irq) / 32; unsigned mask_bit = SIC_SYSIRQ(irq) % 32; @@ -175,7 +176,7 @@ void bfin_internal_unmask_irq(unsigned int irq) { unsigned long flags = hard_local_irq_save(); -#ifndef CONFIG_BF60x +#ifndef SEC_GCTL #ifdef SIC_IMASK0 unsigned mask_bank = SIC_SYSIRQ(irq) / 32; unsigned mask_bit = SIC_SYSIRQ(irq) % 32; @@ -199,7 +200,7 @@ void bfin_internal_unmask_irq(unsigned int irq) hard_local_irq_restore(flags); } -#ifdef CONFIG_BF60x +#ifdef SEC_GCTL static void bfin_sec_preflow_handler(struct irq_data *d) { unsigned long flags = hard_local_irq_save(); @@ -310,7 +311,24 @@ static void bfin_sec_disable(struct irq_data *d) hard_local_irq_restore(flags); } -static void bfin_sec_raise_irq(unsigned int sid) +static void bfin_sec_set_priority(unsigned int sec_int_levels, u8 *sec_int_priority) +{ + unsigned long flags = hard_local_irq_save(); + uint32_t reg_sctl; + int i; + + bfin_write_SEC_SCI(0, SEC_CPLVL, sec_int_levels); + + for (i = 0; i < SYS_IRQS - BFIN_IRQ(0); i++) { + reg_sctl = bfin_read_SEC_SCTL(i) & ~SEC_SCTL_PRIO; + reg_sctl |= sec_int_priority[i] << SEC_SCTL_PRIO_OFFSET; + bfin_write_SEC_SCTL(i, reg_sctl); + } + + hard_local_irq_restore(flags); +} + +void bfin_sec_raise_irq(unsigned int sid) { unsigned long flags = hard_local_irq_save(); @@ -396,24 +414,34 @@ void handle_sec_fault(unsigned int irq, struct irq_desc *desc) raw_spin_unlock(&desc->lock); } -static int sec_suspend(void) +void handle_core_fault(unsigned int irq, struct irq_desc *desc) { - return 0; -} + struct pt_regs *fp = get_irq_regs(); -static void sec_resume(void) -{ - bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); - udelay(100); - bfin_write_SEC_GCTL(SEC_GCTL_EN); - bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); -} + raw_spin_lock(&desc->lock); -static struct syscore_ops sec_pm_syscore_ops = { - .suspend = sec_suspend, - .resume = sec_resume, -}; + switch (irq) { + case IRQ_C0_DBL_FAULT: + double_fault_c(fp); + break; + case IRQ_C0_HW_ERR: + dump_bfin_process(fp); + dump_bfin_mem(fp); + show_regs(fp); + printk(KERN_NOTICE "Kernel Stack\n"); + show_stack(current, NULL); + print_modules(); + panic("Kernel core hardware error"); + break; + case IRQ_C0_NMI_L1_PARITY_ERR: + panic("NMI occurs unexpectedly"); + break; + default: + panic("Core 1 fault occurs unexpectedly"); + } + raw_spin_unlock(&desc->lock); +} #endif #ifdef CONFIG_SMP @@ -437,7 +465,7 @@ static void bfin_internal_unmask_irq_chip(struct irq_data *d) } #endif -#if defined(CONFIG_PM) && !defined(CONFIG_BF60x) +#if defined(CONFIG_PM) && !defined(SEC_GCTL) int bfin_internal_set_wake(unsigned int irq, unsigned int state) { u32 bank, bit, wakeup = 0; @@ -496,7 +524,10 @@ static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state) return bfin_internal_set_wake(d->irq, state); } #else -# define bfin_internal_set_wake(irq, state) +inline int bfin_internal_set_wake(unsigned int irq, unsigned int state) +{ + return 0; +} # define bfin_internal_set_wake_chip NULL #endif @@ -518,7 +549,7 @@ static struct irq_chip bfin_internal_irqchip = { .irq_set_wake = bfin_internal_set_wake_chip, }; -#ifdef CONFIG_BF60x +#ifdef SEC_GCTL static struct irq_chip bfin_sec_irqchip = { .name = "SEC", .irq_mask_ack = bfin_sec_mask_ack_irq, @@ -868,14 +899,6 @@ void bfin_demux_gpio_irq(unsigned int inta_irq, #else -# ifndef CONFIG_BF60x -#define NR_PINT_SYS_IRQS 4 -#define NR_PINTS 160 -# else -#define NR_PINT_SYS_IRQS 6 -#define NR_PINTS 112 -#endif - #define NR_PINT_BITS 32 #define IRQ_NOT_AVAIL 0xFF @@ -897,29 +920,21 @@ static struct bfin_pint_regs * const pint[NR_PINT_SYS_IRQS] = { #endif }; -#ifndef CONFIG_BF60x inline unsigned int get_irq_base(u32 bank, u8 bmap) { unsigned int irq_base; +#ifndef CONFIG_BF60x if (bank < 2) { /*PA-PB */ irq_base = IRQ_PA0 + bmap * 16; } else { /*PC-PJ */ irq_base = IRQ_PC0 + bmap * 16; } - - return irq_base; -} #else -inline unsigned int get_irq_base(u32 bank, u8 bmap) -{ - unsigned int irq_base; - irq_base = IRQ_PA0 + bank * 16 + bmap * 16; - +#endif return irq_base; } -#endif /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ void init_pint_lut(void) @@ -1089,6 +1104,9 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) } #ifdef CONFIG_PM +static struct bfin_pm_pint_save save_pint_reg[NR_PINT_SYS_IRQS]; +static u32 save_pint_sec_ctl[NR_PINT_SYS_IRQS]; + static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) { u32 pint_irq; @@ -1124,6 +1142,59 @@ static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) return 0; } + +void bfin_pint_suspend(void) +{ + u32 bank; + + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { + save_pint_reg[bank].mask_set = pint[bank]->mask_set; + save_pint_reg[bank].assign = pint[bank]->assign; + save_pint_reg[bank].edge_set = pint[bank]->edge_set; + save_pint_reg[bank].invert_set = pint[bank]->invert_set; + } +} + +void bfin_pint_resume(void) +{ + u32 bank; + + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) { + pint[bank]->mask_set = save_pint_reg[bank].mask_set; + pint[bank]->assign = save_pint_reg[bank].assign; + pint[bank]->edge_set = save_pint_reg[bank].edge_set; + pint[bank]->invert_set = save_pint_reg[bank].invert_set; + } +} + +#ifdef SEC_GCTL +static int sec_suspend(void) +{ + u32 bank; + + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) + save_pint_sec_ctl[bank] = bfin_read_SEC_SCTL(bank + SIC_SYSIRQ(IRQ_PINT0)); + return 0; +} + +static void sec_resume(void) +{ + u32 bank; + + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); + udelay(100); + bfin_write_SEC_GCTL(SEC_GCTL_EN); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); + + for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) + bfin_write_SEC_SCTL(bank + SIC_SYSIRQ(IRQ_PINT0), save_pint_sec_ctl[bank]); +} + +static struct syscore_ops sec_pm_syscore_ops = { + .suspend = sec_suspend, + .resume = sec_resume, +}; +#endif #else # define bfin_gpio_set_wake NULL #endif @@ -1230,6 +1301,7 @@ void __cpuinit init_exception_vectors(void) CSYNC(); } +#ifndef SEC_GCTL /* * This function should be called during kernel startup to initialize * the BFin IRQ handling routines. @@ -1240,7 +1312,6 @@ int __init init_arch_irq(void) int irq; unsigned long ilat = 0; -#ifndef CONFIG_BF60x /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ #ifdef SIC_IMASK0 bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); @@ -1255,9 +1326,6 @@ int __init init_arch_irq(void) #else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); #endif -#else /* CONFIG_BF60x */ - bfin_write_SEC_GCTL(SEC_GCTL_RESET); -#endif local_irq_disable(); @@ -1267,10 +1335,6 @@ int __init init_arch_irq(void) pint[1]->assign = CONFIG_PINT1_ASSIGN; pint[2]->assign = CONFIG_PINT2_ASSIGN; pint[3]->assign = CONFIG_PINT3_ASSIGN; -# ifdef CONFIG_BF60x - pint[4]->assign = CONFIG_PINT4_ASSIGN; - pint[5]->assign = CONFIG_PINT5_ASSIGN; -# endif # endif /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ init_pint_lut(); @@ -1283,7 +1347,6 @@ int __init init_arch_irq(void) irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { -#ifndef CONFIG_BF60x #if BFIN_GPIO_PINT case IRQ_PINT0: case IRQ_PINT1: @@ -1319,7 +1382,6 @@ int __init init_arch_irq(void) irq_set_handler(irq, handle_percpu_irq); break; #endif -#endif #ifdef CONFIG_TICKSOURCE_CORETMR case IRQ_CORETMR: @@ -1349,8 +1411,7 @@ int __init init_arch_irq(void) init_mach_irq(); -#ifndef CONFIG_BF60x -#if (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) && !defined(CONFIG_BF60x) +#if (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++) irq_set_chip_and_handler(irq, &bfin_mac_status_irqchip, handle_level_irq); @@ -1360,28 +1421,6 @@ int __init init_arch_irq(void) irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, handle_level_irq); -#else - for (irq = BFIN_IRQ(0); irq <= SYS_IRQS; irq++) { - if (irq < CORE_IRQS) { - irq_set_chip(irq, &bfin_sec_irqchip); - __irq_set_handler(irq, handle_sec_fault, 0, NULL); - } else if (irq >= BFIN_IRQ(21) && irq <= BFIN_IRQ(26)) { - irq_set_chip(irq, &bfin_sec_irqchip); - irq_set_chained_handler(irq, bfin_demux_gpio_irq); - } else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) { - irq_set_chip(irq, &bfin_sec_irqchip); - irq_set_handler(irq, handle_percpu_irq); - } else { - irq_set_chip_and_handler(irq, &bfin_sec_irqchip, - handle_fasteoi_irq); - __irq_set_preflow_handler(irq, bfin_sec_preflow_handler); - } - } - for (irq = GPIO_IRQ_BASE; - irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) - irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, - handle_level_irq); -#endif bfin_write_IMASK(0); CSYNC(); ilat = bfin_read_ILAT(); @@ -1393,7 +1432,6 @@ int __init init_arch_irq(void) /* IMASK=xxx is equivalent to STI xx or bfin_irq_flags=xx, * local_irq_enable() */ -#ifndef CONFIG_BF60x program_IAR(); /* Therefore it's better to setup IARs before interrupts enabled */ search_IAR(); @@ -1427,23 +1465,6 @@ int __init init_arch_irq(void) #else bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif -#else /* CONFIG_BF60x */ - /* Enable interrupts IVG7-15 */ - bfin_irq_flags |= IMASK_IVG15 | - IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | - IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; - - - bfin_write_SEC_FCTL(SEC_FCTL_EN | SEC_FCTL_SYSRST_EN | SEC_FCTL_FLTIN_EN); - bfin_sec_enable_sci(SIC_SYSIRQ(IRQ_WATCH0)); - bfin_sec_enable_ssi(SIC_SYSIRQ(IRQ_WATCH0)); - bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); - udelay(100); - bfin_write_SEC_GCTL(SEC_GCTL_EN); - bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); - init_software_driven_irq(); - register_syscore_ops(&sec_pm_syscore_ops); -#endif return 0; } @@ -1452,14 +1473,11 @@ __attribute__((l1_text)) #endif static int vec_to_irq(int vec) { -#ifndef CONFIG_BF60x struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; unsigned long sic_status[3]; -#endif if (likely(vec == EVT_IVTMR_P)) return IRQ_CORETMR; -#ifndef CONFIG_BF60x #ifdef SIC_ISR sic_status[0] = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); #else @@ -1488,11 +1506,119 @@ static int vec_to_irq(int vec) #endif return ivg->irqno; } -#else - /* for bf60x read */ +} + +#else /* SEC_GCTL */ + +/* + * This function should be called during kernel startup to initialize + * the BFin IRQ handling routines. + */ + +int __init init_arch_irq(void) +{ + int irq; + unsigned long ilat = 0; + + bfin_write_SEC_GCTL(SEC_GCTL_RESET); + + local_irq_disable(); + +#if BFIN_GPIO_PINT +# ifdef CONFIG_PINTx_REASSIGN + pint[0]->assign = CONFIG_PINT0_ASSIGN; + pint[1]->assign = CONFIG_PINT1_ASSIGN; + pint[2]->assign = CONFIG_PINT2_ASSIGN; + pint[3]->assign = CONFIG_PINT3_ASSIGN; + pint[4]->assign = CONFIG_PINT4_ASSIGN; + pint[5]->assign = CONFIG_PINT5_ASSIGN; +# endif + /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */ + init_pint_lut(); +#endif + + for (irq = 0; irq <= SYS_IRQS; irq++) { + if (irq <= IRQ_CORETMR) { + irq_set_chip(irq, &bfin_core_irqchip); +#ifdef CONFIG_TICKSOURCE_CORETMR + if (irq == IRQ_CORETMR) +# ifdef CONFIG_SMP + irq_set_handler(irq, handle_percpu_irq); +# else + irq_set_handler(irq, handle_simple_irq); +# endif +#endif + } else if (irq < BFIN_IRQ(0)) { + irq_set_chip_and_handler(irq, &bfin_internal_irqchip, + handle_simple_irq); + } else if (irq == IRQ_SEC_ERR) { + irq_set_chip_and_handler(irq, &bfin_sec_irqchip, + handle_sec_fault); + } else if (irq < CORE_IRQS && irq >= IRQ_C0_DBL_FAULT) { + irq_set_chip_and_handler(irq, &bfin_sec_irqchip, + handle_core_fault); + } else if (irq >= BFIN_IRQ(21) && irq <= BFIN_IRQ(26)) { + irq_set_chip(irq, &bfin_sec_irqchip); + irq_set_chained_handler(irq, bfin_demux_gpio_irq); + } else if (irq >= BFIN_IRQ(34) && irq <= BFIN_IRQ(37)) { + irq_set_chip(irq, &bfin_sec_irqchip); + irq_set_handler(irq, handle_percpu_irq); + } else { + irq_set_chip_and_handler(irq, &bfin_sec_irqchip, + handle_fasteoi_irq); + __irq_set_preflow_handler(irq, bfin_sec_preflow_handler); + } + } + for (irq = GPIO_IRQ_BASE; + irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++) + irq_set_chip_and_handler(irq, &bfin_gpio_irqchip, + handle_level_irq); + + bfin_write_IMASK(0); + CSYNC(); + ilat = bfin_read_ILAT(); + CSYNC(); + bfin_write_ILAT(ilat); + CSYNC(); + + printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n"); + + bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority); + + bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority); + + /* Enable interrupts IVG7-15 */ + bfin_irq_flags |= IMASK_IVG15 | + IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | + IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; + + + bfin_write_SEC_FCTL(SEC_FCTL_EN | SEC_FCTL_SYSRST_EN | SEC_FCTL_FLTIN_EN); + bfin_sec_enable_sci(SIC_SYSIRQ(IRQ_WATCH0)); + bfin_sec_enable_ssi(SIC_SYSIRQ(IRQ_WATCH0)); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_RESET); + udelay(100); + bfin_write_SEC_GCTL(SEC_GCTL_EN); + bfin_write_SEC_SCI(0, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); + bfin_write_SEC_SCI(1, SEC_CCTL, SEC_CCTL_EN | SEC_CCTL_NMI_EN); + + init_software_driven_irq(); + register_syscore_ops(&sec_pm_syscore_ops); + + return 0; +} + +#ifdef CONFIG_DO_IRQ_L1 +__attribute__((l1_text)) +#endif +static int vec_to_irq(int vec) +{ + if (likely(vec == EVT_IVTMR_P)) + return IRQ_CORETMR; + return BFIN_IRQ(bfin_read_SEC_SCI(0, SEC_CSID)); -#endif /* end of CONFIG_BF60x */ } +#endif /* SEC_GCTL */ #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) @@ -1514,6 +1640,10 @@ int __ipipe_get_irq_priority(unsigned irq) if (irq <= IRQ_CORETMR) return irq; +#ifdef SEC_GCTL + if (irq >= BFIN_IRQ(0)) + return IVG11; +#else for (ient = 0; ient < NR_PERI_INTS; ient++) { struct ivgx *ivg = ivg_table + ient; if (ivg->irqno == irq) { @@ -1524,6 +1654,7 @@ int __ipipe_get_irq_priority(unsigned irq) } } } +#endif return IVG15; } @@ -1536,8 +1667,6 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); struct ipipe_domain *this_domain = __ipipe_current_domain; - struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; - struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; int irq, s = 0; irq = vec_to_irq(vec); diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index ca6655e0d65..87bfe549ad3 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -172,6 +172,10 @@ int bfin_pm_suspend_mem_enter(void) bfin_gpio_pm_hibernate_suspend(); +#if BFIN_GPIO_PINT + bfin_pint_suspend(); +#endif + #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) flushinv_all_dcache(); #endif @@ -190,6 +194,10 @@ int bfin_pm_suspend_mem_enter(void) _enable_icplb(); _enable_dcplb(); +#if BFIN_GPIO_PINT + bfin_pint_resume(); +#endif + bfin_gpio_pm_hibernate_restore(); blackfin_dma_resume(); |