Merge branch 'pm-cpufreq'

* pm-cpufreq: (57 commits)
  cpufreq: MAINTAINERS: Add co-maintainer
  cpufreq: pxa2xx: initialize variables
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  cpufreq: cpu0: Put cpu parent node after using it
  cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
  cpufreq: ARM big LITTLE: put DT nodes after using them
  cpufreq: Don't call __cpufreq_governor() for drivers without target()
  cpufreq: exynos5440: Protect OPP search calls with RCU lock
  cpufreq: dbx500: Round to closest available freq
  cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
  cpufreq / intel_pstate: Optimize intel_pstate_set_policy
  cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
  arm: exynos: Enable OPP library support for exynos5440
  cpufreq: exynos: Remove error return even if no soc is found
  cpufreq: exynos: Add cpufreq driver for exynos5440
  cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
  cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
  cpufreq: convert cpufreq_driver to using RCU
  cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
  cpufreq: sparc: move cpufreq driver to drivers/cpufreq
  ...

Conflicts:
	MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
	drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)

73 files changed, 70 insertions, 5295 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1cacda426a0..cdb83225f3e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2160,7 +2160,6 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_IMX
@@ -2170,30 +2169,6 @@ config CPU_FREQ_IMX
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-	select CPU_FREQ_TABLE
-
 config CPU_FREQ_S3C
 	bool
 	help
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index fb5c1aa98a6..dd1ffccc75e 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
deleted file mode 100644
index 4729eaab0f4..00000000000
--- a/arch/arm/mach-davinci/cpufreq.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * CPU frequency scaling for DaVinci
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
- *
- *  Copyright (C) 2005 Nokia Corporation
- *  Written by Tony Lindgren <tony@atomide.com>
- *
- *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Updated to support OMAP3
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/cpufreq.h>
-#include <mach/common.h>
-
-#include "clock.h"
-
-struct davinci_cpufreq {
-	struct device *dev;
-	struct clk *armclk;
-	struct clk *asyncclk;
-	unsigned long asyncrate;
-};
-static struct davinci_cpufreq cpufreq;
-
-static int davinci_verify_speed(struct cpufreq_policy *policy)
-{
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-	struct clk *armclk = cpufreq.armclk;
-
-	if (freq_table)
-		return cpufreq_frequency_table_verify(policy, freq_table);
-
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
-	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-						policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static unsigned int davinci_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpufreq.armclk) / 1000;
-}
-
-static int davinci_target(struct cpufreq_policy *policy,
-				unsigned int target_freq, unsigned int relation)
-{
-	int ret = 0;
-	unsigned int idx;
-	struct cpufreq_freqs freqs;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct clk *armclk = cpufreq.armclk;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	freqs.old = davinci_getspeed(0);
-	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
-	freqs.cpu = 0;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
-						freqs.new, relation, &idx);
-	if (ret)
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
-		ret = pdata->set_voltage(idx);
-		if (ret)
-			goto out;
-	}
-
-	ret = clk_set_rate(armclk, idx);
-	if (ret)
-		goto out;
-
-	if (cpufreq.asyncclk) {
-		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
-		if (ret)
-			goto out;
-	}
-
-	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_voltage && freqs.new < freqs.old)
-		pdata->set_voltage(idx);
-
-out:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int davinci_cpu_init(struct cpufreq_policy *policy)
-{
-	int result = 0;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Finish platform specific initialization */
-	if (pdata->init) {
-		result = pdata->init();
-		if (result)
-			return result;
-	}
-
-	policy->cur = policy->min = policy->max = davinci_getspeed(0);
-
-	if (freq_table) {
-		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-		if (!result)
-			cpufreq_frequency_table_get_attr(freq_table,
-							policy->cpu);
-	} else {
-		policy->cpuinfo.min_freq = policy->min;
-		policy->cpuinfo.max_freq = policy->max;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = davinci_getspeed(0);
-
-	/*
-	 * Time measurement across the target() function yields ~1500-1800us
-	 * time taken with no drivers on notification list.
-	 * Setting the latency to 2000 us to accommodate addition of drivers
-	 * to pre/post change notification list.
-	 */
-	policy->cpuinfo.transition_latency = 2000 * 1000;
-	return 0;
-}
-
-static int davinci_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *davinci_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver davinci_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= davinci_verify_speed,
-	.target		= davinci_target,
-	.get		= davinci_getspeed,
-	.init		= davinci_cpu_init,
-	.exit		= davinci_cpu_exit,
-	.name		= "davinci",
-	.attr		= davinci_cpufreq_attr,
-};
-
-static int __init davinci_cpufreq_probe(struct platform_device *pdev)
-{
-	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
-	struct clk *asyncclk;
-
-	if (!pdata)
-		return -EINVAL;
-	if (!pdata->freq_table)
-		return -EINVAL;
-
-	cpufreq.dev = &pdev->dev;
-
-	cpufreq.armclk = clk_get(NULL, "arm");
-	if (IS_ERR(cpufreq.armclk)) {
-		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
-		return PTR_ERR(cpufreq.armclk);
-	}
-
-	asyncclk = clk_get(cpufreq.dev, "async");
-	if (!IS_ERR(asyncclk)) {
-		cpufreq.asyncclk = asyncclk;
-		cpufreq.asyncrate = clk_get_rate(asyncclk);
-	}
-
-	return cpufreq_register_driver(&davinci_driver);
-}
-
-static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
-{
-	clk_put(cpufreq.armclk);
-
-	if (cpufreq.asyncclk)
-		clk_put(cpufreq.asyncclk);
-
-	return cpufreq_unregister_driver(&davinci_driver);
-}
-
-static struct platform_driver davinci_cpufreq_driver = {
-	.driver = {
-		.name	 = "cpufreq-davinci",
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(davinci_cpufreq_remove),
-};
-
-int __init davinci_cpufreq_init(void)
-{
-	return platform_driver_probe(&davinci_cpufreq_driver,
-							davinci_cpufreq_probe);
-}
-
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 70f94c87479..d5dde072733 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -72,10 +72,12 @@ config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_HAS_OPP
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
 	select PINCTRL
 	select PINCTRL_EXYNOS5440
+	select PM_OPP
 	help
 	  Enable EXYNOS5440 SoC support
 
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index d8c75c3c925..387dc4cceca 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -87,13 +87,12 @@ static int mxc_set_target(struct cpufreq_policy *policy,
 
 	freqs.old = clk_get_rate(cpu_clk) / 1000;
 	freqs.new = freq_Hz / 1000;
-	freqs.cpu = 0;
 	freqs.flags = 0;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	ret = set_cpu_freq(freq_Hz);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
 }
@@ -145,14 +144,11 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy)
 	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
 
 	/* Manual states, that PLL stabilizes in two CLK32 periods */
 	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
 	if (ret < 0) {
 		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
 		       __func__, ret);
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 5521d18bf19..d14d6b76f4c 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
deleted file mode 100644
index 590c192cdf4..00000000000
--- a/arch/arm/mach-integrator/cpu.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/cpu.c
- *
- *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * CPU support functions
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-static struct cpufreq_driver integrator_driver;
-
-#define CM_ID  	__io_address(INTEGRATOR_HDR_ID)
-#define CM_OSC	__io_address(INTEGRATOR_HDR_OSC)
-#define CM_STAT __io_address(INTEGRATOR_HDR_STAT)
-#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK)
-
-static const struct icst_params lclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 8,
-	.vd_max		= 132,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static const struct icst_params cclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 160,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-/*
- * Validate the speed policy.
- */
-static int integrator_verify_policy(struct cpufreq_policy *policy)
-{
-	struct icst_vco vco;
-
-	cpufreq_verify_within_limits(policy, 
-				     policy->cpuinfo.min_freq, 
-				     policy->cpuinfo.max_freq);
-
-	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
-	policy->max = icst_hz(&cclk_params, vco) / 1000;
-
-	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
-	policy->min = icst_hz(&cclk_params, vco) / 1000;
-
-	cpufreq_verify_within_limits(policy, 
-				     policy->cpuinfo.min_freq, 
-				     policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-
-static int integrator_set_target(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
-{
-	cpumask_t cpus_allowed;
-	int cpu = policy->cpu;
-	struct icst_vco vco;
-	struct cpufreq_freqs freqs;
-	u_int cm_osc;
-
-	/*
-	 * Save this threads cpus_allowed mask.
-	 */
-	cpus_allowed = current->cpus_allowed;
-
-	/*
-	 * Bind to the specified CPU.  When this call returns,
-	 * we should be running on the right CPU.
-	 */
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* get current setting */
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		vco.s = (cm_osc >> 8) & 7;
-	} else if (machine_is_cintegrator()) {
-		vco.s = 1;
-	}
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-	freqs.old = icst_hz(&cclk_params, vco) / 1000;
-
-	/* icst_hz_to_vco rounds down -- so we need the next
-