Merge tag 'v3.5-rc4' into for-3.6

Linux 3.5-rc4 contains some bug fixes which overlap with new features.

203 files changed, 868 insertions, 1051 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 84449dd8f03..a91009c6187 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -293,6 +293,7 @@ config ARCH_VERSATILE
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select NEED_MACH_IO_H if PCI
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
 	select PLAT_VERSATILE_FPGA_IRQ
@@ -588,6 +589,7 @@ config ARCH_ORION5X
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_IO_H
 	select PLAT_ORION
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index 153a4b2d12b..c9b4f27d191 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -11,7 +11,7 @@
 /include/ "mmp2.dtsi"
 
 / {
-	model = "Marvell MMP2 Aspenite Development Board";
+	model = "Marvell MMP2 Brownstone Development Board";
 	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
 
 	chosen {
@@ -19,7 +19,7 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x04000000>;
+		reg = <0x00000000 0x08000000>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea7cc0..581cb081cb0 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
+			ti,intc-size = <96>;
+			reg = <0x480FE000 0x1000>;
 		};
 
 		uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 8314e417188..dd4358bc26e 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 9e61da404d5..419ea7413d2 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1310 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index 0d8472e5ab9..c9a54e06fb6 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr1340 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index a26fc47a55e..d71fe2a68f0 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr1340 SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 1f8e1e1481d..10dcec7e732 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr13xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index fc82b1a2645..d71b8d581e3 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index 01c5e358fdb..ed3627c116c 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr300 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index dc5e2d445a9..b00544e0cd5 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index e47081c494d..62fc4fb3e5f 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr310 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 6308fa3bec1..c13fd1f3b09 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 Evaluation Baord
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 5372ca399b1..1f49d69595a 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for SPEAr320 SoC
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index 91072553963..3a8bb573692 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * DTS file for all SPEAr3xx SoCs
  *
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 9d7eb530f95..aa07f5938f0 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
@@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 7be54690aee..e42cf597f6e 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -19,6 +19,7 @@
 	"	.long	1b, 4f, 2b, 4f\n"			\
 	"	.popsection\n"					\
 	"	.pushsection .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
 	"4:	mov	%0, " err_reg "\n"			\
 	"	b	3b\n"					\
 	"	.popsection"
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index e0d1c0cfa54..6b9b077d86b 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -4,7 +4,7 @@
  * ARM PrimeXsys System Controller SP810 header file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 437f0c42651..0d1851ca6eb 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -495,6 +495,7 @@ ENDPROC(__und_usr)
  * The out of line fixup for the ldrt above.
  */
 	.pushsection .fixup, "ax"
+	.align	2
 4:	mov	pc, r9
 	.popsection
 	.pushsection __ex_table,"a"
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 8f96ec778e8..6123daf397a 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = {
 	/* LDRSB (literal)	1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
 	/* LDRH (literal)	1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
 	/* LDRSH (literal)	1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+	DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
 						 REGS(PC, NOSPPCX, 0, 0, 0)),
 
 	/* STRB (immediate)	1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index f8437dd238c..ded4652ada8 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -1,4 +1,8 @@
-obj-y					:= clock.o highbank.o system.o
+obj-y					:= clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
+
 obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index d8e2d0be64a..141ed517182 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void);
 static inline void highbank_lluart_map_io(void) {}
 #endif
 
+extern void highbank_smc1(int fn, int arg);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 410a112bb52..8777612b1a4 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = {
 	{}
 };
 
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+	/* Disable PL310 L2 Cache controller */
+	highbank_smc1(0x102, 0x0);
+}
+#endif
+
 static void __init highbank_init_irq(void)
 {
 	of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Enable PL310 L2 Cache controller */
+	highbank_smc1(0x102, 0x1);
 	l2x0_of_init(0, ~0UL);
+	outer_cache.disable = highbank_l2x0_disable;
+#endif
 }
 
 static void __init highbank_timer_init(void)
diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S
new file mode 100644
index 00000000000..407d17baaaa
--- /dev/null
+++ b/arch/arm/mach-highbank/smc.S
@@ -0,0 +1,27 @@
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+	stmfd   sp!, {r4-r11, lr}
+	mov	r12, r0
+	mov 	r0, r1
+	dsb
+	smc	#0
+	ldmfd   sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0021f726b15..eff4db5de0d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -477,6 +477,7 @@ config MACH_MX31_3DS
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 0f0beb580b7..516ddee1948 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
 	clk_register_clkdev(clk[clko], "clko", NULL);
 
-	mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
-			MX1_TIM1_INT);
+	mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index 4e4f384ee8d..ea13e61bd5f 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
 	clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
 
-	mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
-			MX21_INT_GPT1);
+	mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d9833bb5fd6..fdd8cc87c9f 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -243,6 +243,6 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
 	clk_register_clkdev(clk[iim_ipg], "iim", NULL);
 
-	mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+	mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 50a7ebd8d1b..295cbd7c08d 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
 
-	mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
-			MX27_INT_GPT1);
+	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
 
 	clk_prepare_enable(clk[emi_ahb_gate]);
 
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index a854b9cae5e..c9a06d800f8 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref)
 	mx31_revision();
 	clk_disable_unprepare(clk[iim_gate]);
 
-	mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
-			MX31_INT_GPT);
+	mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index a9e60bf7dd7..920a8cc4272 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -267,11 +267,9 @@ int __init mx35_clocks_init()
 	imx_print_silicon_rev("i.MX35", mx35_revision());
 
 #ifdef CONFIG_MXC_USE_EPIT
-	epit_timer_init(&epit1_clk,
-			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+	epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
 #else
-	mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
-			MX35_INT_GPT);
+	mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 #endif
 
 	return 0;
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index fcd94f3b0f0..a2200c77bf7 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 				periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
 	clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
 				main_bus_sel, ARRAY_SIZE(main_bus_sel));
-	clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+	clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
 				per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
 	clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
 	clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
 	clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
-	clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+	clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
 				per_root_sel, ARRAY_SIZE(per_root_sel));
 	clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
 	clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
@@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
 	clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
 	clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
-	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+	clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
 	clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
 	clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
 	clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
@@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_set_rate(clk[esdhc_b_podf], 166250000);
 
 	/* System timer */
-	mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_INT_GPT);
+	mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
 
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX51", mx51_revision());
@@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_set_rate(clk[esdhc_b_podf], 200000000);
 
 	/* System timer */
-	mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
-		MX53_INT_GPT);
+	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
 
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index cab02d0a15d..17dc66a085a 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -122,10 +122,6 @@ static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
 				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
 
-static const char * const clks_init_on[] __initconst = {
-	"mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
 	pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
@@ -161,11 +157,14 @@ enum mx6q_clks {
 
 static struct clk *clk[clk_max];
 
+static enum mx6q_clks const clks_init_on[] __initconst = {
+	mmdc_ch0_axi, mmdc_ch1_axi,
+};
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
-	struct clk *c;
 	int i, irq;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -424,21 +423,14 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[ahb], "ahb", NULL);
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 
-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
-		c = clk_get_sys(clks_init_on[i], NULL);
-		if (IS_ERR(c)) {
-			pr_err("%s: failed to get clk %s", __func__,
-			       clks_init_on[i]);
-			return PTR_ERR(c);
-		}
-		clk_prepare_enable(c);
-	}
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clk[clks_init_on[i]]);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(NULL, base, irq);
+	mxc_timer_init(base, irq);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
index 4685919deb6..0440379e362 100644
--- a/arch/arm/mach-imx/clk-pllv2.c
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -74,30 +74,15 @@ struct clk_pllv2 {
 	void __iomem	*base;
 };
 
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
-		unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+		u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
 {
 	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
-	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
-	void __iomem *pllbase;
+	unsigned long dbl;
 	s64 temp;
-	struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
-	pllbase = pll->base;
 
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
 	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
 
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
 	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
 	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
 	mfi = (mfi <= 5) ? 5 : mfi;
@@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
 	return temp;
 }
 
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
+	u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+	void __iomem *pllbase;
 	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+	pllbase = pll->base;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+	dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+	dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+	return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+		u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
 	u32 reg;
-	void __iomem *pllbase;
 	long mfi, pdf, mfn, mfd = 999999;
 	s64 temp64;
 	unsigned long quad_parent_rate;
-	unsigned long pll_hfsm, dp_ctl;
-
-	pllbase = pll->base;
 
 	quad_parent_rate = 4 * parent_rate;
 	pdf = mfi = -1;
@@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
 		return -EINVAL;
 	pdf--;
 
-	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
-	do_div(temp64, quad_parent_rate/1000000);
+	temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate / 1000000);
 	mfn = (long)temp64;
 
+	reg = mfi << 4 | pdf;
+
+	*dp_op = reg;
+	*dp_mfd = mfd;
+	*dp_mfn = mfn;
+
+	return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_pllv2 *pll = to_clk_pllv2(hw);
+	void __iomem *pllbase;
+	u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+	int ret;
+
+	pllbase = pll->base;
+
+
+	ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+	if (ret)
+		return ret;
+
 	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
 	/* use dpdck0_2 */
 	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
-	} else {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
-	}
+
+	__raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+	__raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+	__raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
 
 	return 0;
 }
@@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
 static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long *prate)
 {
-	return rate;
+	u32 dp_op, dp_mfd, dp_mfn;
+
+	__clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+	return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+			dp_op, dp_mfd, dp_mfn);
 }
 
 static int clk_pllv2_prepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
index 5e11ba7daee..5e3f1f0f4ca 100644
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ b/arch/arm/mach-imx/crm-regs-imx5.h
@@ -23,7 +23,7 @@
 #define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
 #define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
 #define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
 
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493abd497..20ed2d56c1a 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
 
 #include <linux/errno.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <mach/common.h>
 
 int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
 	return 1;
 }
 
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
+	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
 	cpu_do_idle();
+	cpu_leave_lowpower();
 
 	/* We should never return from idle */
 	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index c515f8ede1a..6450303f1a7 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}, {
 		I2C_BOARD_INFO("tsc2007", 0x48),
-		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
 		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index ac50f1671e3..1e09de50cbc 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}, {
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
 	},
 };
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index dff82eb57cd..f76edb96a48 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = {
 	PB23_PF_USB_PWR,
 	PB24_PF_USB_OC,
 	/* CSI */
+	TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+	TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
 	PB10_PF_CSI_D0,
 	PB11_PF_CSI_D1,
 	PB12_PF_CSI_D2,
@@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = {
 	{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
 };
 
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+	{
+		.gpio = TVP5150_RSTN,
+		.flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+		.label = "tvp5150_rstn",
+	},
+	{
+		.gpio = TVP5150_PWDN,
+		.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+		.label = "tvp5150_pwdn",
+	},
+	{
+		.gpio = OTG_PHY_CS_GPIO,
+		.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+		.label = "usbotg_cs",
+	},
+};
+
 /* Camera */
 static int visstrim_camera_power(struct device *dev, int on)
 {
@@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void)
 	struct platform_device *pdev;
 	int dma;
 
-	/* Initialize tvp5150 gpios */
-	mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
-	gpio_set_value(TVP5150_RSTN, 1);
-	gpio_set_value(TVP5150_PWDN, 0);
-	ndelay(1);
-
 	gpio_set_value(TVP5150_PWDN, 1);
 	ndelay(1);
 	gpio_set_value(TVP5150_RSTN, 0);
@@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
 /* USB OTG */
 static int otg_phy_init(struct platform_device *pdev)
 {
-	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
-	mdelay(10);
-
 	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
@@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void)
 	if (ret)
 		pr_err("Failed to setup pins (%d)\n", ret);
 
+	ret = gpio_request_array(visstrim_m10_gpios,
+				ARRAY_SIZE(visstrim_m10_gpios));
+	if (ret)
+		pr_err("Failed to request gpios (%d)\n", ret);
+
 	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 	imx27_add_imx_uart0(&uart_pdata);
 
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d14bbe949a4..3e7401fca76 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,7 +32,7 @@
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_MMIO_SIZE        0xc00000
 
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 967ed5b35a4..a8983b9778d 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
 
 void __init imx3_init_l2x0(void)
 {
+#ifdef CONFIG_CACHE_L2X0
 	void __iomem *l2x0_base;
 	void __iomem *clkctl_base;
 
@@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void)
 	}
 
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
 }
 
 #ifdef CONFIG_SOC_IMX31
@@ -179,6 +181,8 @@ void __init imx31_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
 
+	pinctrl_provide_dummies();
+
 	if (to_version == 1) {
 		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
 			strlen(imx31_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index feeee17da96..1d003053d56 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -202,6 +202,8 @@ void __init imx51_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
 	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
 
+	pinctrl_provide_dummies();
+
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
 
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 2222c573951..b0d3cc49269 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,9 +20,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 25fb3fd418e..f261cd24264 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
 	gate_fn->gate.flags = clk_gate_flags;
 	gate_fn->gate.lock = lock;
 	gate_fn->gate.hw.init = &init;
+	gate_fn->fn = fn;
 
 	/* ops is the gate ops, but with our disable function */
 	if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
@@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
 				    bit_idx, 0, &gating_lock, fn);
 }
 
+static struct clk *ge0, *ge1;
+
 void __init kirkwood_clk_init(void)
 {
-	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+	struct clk *runit, *sata0, *sata1, *usb0, *sdio;
 	struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
@@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
 			IRQ_KIRKWOOD_GE00_ERR);
+	/* The interface forgets the MAC address assigned by u-boot if
+	the clock is turned off, so claim the clk now. */
+	clk_prepare_enable(ge0);
 }
 
 
@@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
 			IRQ_KIRKWOOD_GE01_ERR);
+	clk_prepare_enable(ge1);
 }
 
 
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 3eee37a3b50..a115142f869 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -38,6 +38,7 @@
 #define IRQ_MASK_HIGH_OFF	0x0014
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
 
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index fede3d503ef..c5b68510776 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -80,6 +80,7 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
 
 #define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
 
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
index fcfe0e3bd70..e60c7d98922 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq.c
@@ -241,6 +241,7 @@ void __init mmp2_init_icu(void)
 	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
 	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
 	icu_data[1].nr_irqs = 2;
+	icu_data[1].cascade_irq = 4;
 	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
 	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
 						   icu_data[1].virq_base, 0,
@@ -249,6 +250,7 @@ void __init mmp2_init_icu(void)
 	icu_data[2].reg_status = mmp_icu_base + 0x154;
 	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
 	icu_data[2].nr_irqs = 2;
+	icu_data[2].cascade_irq = 5;
 	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
 	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
 						   icu_data[2].virq_base, 0,
@@ -257,6 +259,7 @@ void __init mmp2_init_icu(void)
 	icu_data[3].reg_status = mmp_icu_base + 0x180;
 	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
 	icu_data[3].nr_irqs = 3;
+	icu_data[3].cascade_irq = 9;
 	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
 	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
 						   icu_data[3].virq_base, 0,
@@ -265,6 +268,7 @@ void __init mmp2_init_icu(void)
 	icu_data[4].reg_status = mmp_icu_base + 0x158;
 	icu_data[4].reg_mask = mmp_icu_base + 0x170;
 	icu_data[4].nr_irqs = 5;
+	icu_data[4].cascade_irq = 17;
 	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
 	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
 						   icu_data[4].virq_base, 0,
@@ -273,6 +277,7 @@ void __init mmp2_init_icu(void)
 	icu_data[5].reg_status = mmp_icu_base + 0x15c;
 	icu_data[5].reg_mask = mmp_icu_base + 0x174;
 	icu_data[5].nr_irqs = 15;
+	icu_data[5].cascade_irq = 35;
 	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
 	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
 						   icu_data[5].virq_base, 0,
@@ -281,6 +286,7 @@ void __init mmp2_init_icu(void)
 	icu_data[6].reg_status = mmp_icu_base + 0x160;
 	icu_data[6].reg_mask = mmp_icu_base + 0x178;
 	icu_data[6].nr_irqs = 2;
+	icu_data[6].cascade_irq = 51;
 	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
 	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
 						   icu_data[6].virq_base, 0,
@@ -289,6 +295,7 @@ void __init mmp2_init_icu(void)
 	icu_data[7].reg_status = mmp_icu_base + 0x188;
 	icu_data[7].reg_mask = mmp_icu_base + 0x184;
 	icu_data[7].nr_irqs = 2;
+	icu_data[7].cascade_irq = 55;
 	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
 	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
 						   icu_data[7].virq_base, 0,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8ca14e88a31..2c5d0ed7528 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode		= MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
 	.mode		= MUSB_HOST,
 #endif
 	.set_power	= tusb_set_power,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909eeb7..580fd17208d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -81,13 +81,13 @@ static u8 omap3_beagle_version;
 static struct {
 	int mmc1_gpio_wp;
 	int usb_pwr_level;
-	int reset_gpio;
+	int dvi_pd_gpio;
 	int usr_button_gpio;
 	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
 	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
-	.reset_gpio = 129,
+	.dvi_pd_gpio = -EINVAL,
 	.usr_button_gpio = 4,
 	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 };
@@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void)
 		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
 		beagle_config.mmc1_gpio_wp = 29;
-		beagle_config.reset_gpio = 170;
+		beagle_config.dvi_pd_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 6:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
 		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.reset_gpio = 170;
+		beagle_config.dvi_pd_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 5:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
 		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.reset_gpio = 170;
+		beagle_config.dvi_pd_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 0:
@@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (r)
 			pr_err("%s: unable to configure nDVI_PWR_EN\n",
 				__func__);
-		r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-				     "DVI_LDO_EN");
-		if (r)
-			pr_err("%s: unable to configure DVI_LDO_EN\n",
-				__func__);
+
+		beagle_config.dvi_pd_gpio = gpio + 2;
+
 	} else {
 		/*
 		 * REVISIT: need ehci-omap hooks for external VBUS
@@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
 
 	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
 			"nEN_USB_PWR");
@@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_init_rev();
 
-	if (beagle_config.mmc1_gpio_wp != -EINVAL)
+	if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
 		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
 	mmc[0].caps = beagle_config.mmc_caps;
 	omap_hsmmc_init(mmc);
@@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void)
 
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
+	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
 	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-	/* REVISIT leave DVI powered down until it's needed ... */
-	gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ff53decceca..df2534de336 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
 	.release_resources = lis302_release,
 	.st_min_limits = {-32, 3, 3},
 	.st_max_limits = {-3, 32, 32},
-	.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
 };
 #endif
 
@@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
 	{
 		I2C_BOARD_INFO("lis3lv02d", 0x1d),
 		.platform_data = &rx51_lis3lv02d_data,
-		.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
 	},
 #endif
 };
@@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void)
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+	rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+	rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
 	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
 	return 0;
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 4e1a3b0e8cc..1efdec236ae 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = 0;
 
-	if (cpu_is_omap3517()) {
+	if (soc_is_am35xx()) {
 		cpu_mask = RATE_IN_34XX;
 		cpu_clkflg = CK_AM35XX;
 	} else if (cpu_is_omap3630()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2172f660384..e2b701e164f 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -84,6 +84,7 @@ static struct clk slimbus_clk = {
 
 static struct clk sys_32k_ck = {
 	.name		= "sys_32k_ck",
+	.clkdm_name	= "prm_clkdm",
 	.rate		= 32768,
 	.ops		= &clkops_null,
 };
@@ -512,6 +513,7 @@ static struct clk ddrphy_ck = {
 	.name		= "ddrphy_ck",
 	.parent		= &dpll_core_m2_ck,
 	.ops		= &clkops_null,
+	.clkdm_name	= "l3_emif_clkdm",
 	.fixed_div	= 2,
 	.recalc		= &omap_fixed_divisor_recalc,
 };
@@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = {
 static struct clk dpll_mpu_m2_ck = {
 	.name		= "dpll_mpu_m2_ck",
 	.parent		= &dpll_mpu_ck,
+	.clkdm_name	= "cm_clkdm",
 	.clksel		= dpll_mpu_m2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_MPU,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = {
 static struct clk l3_div_ck = {
 	.name		= "l3_div_ck",
 	.parent		= &div_core_ck,
+	.clkdm_name	= "cm_clkdm",
 	.clksel		= l3_div_div,
 	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
 	.clksel_mask	= OMAP4430_CLKSEL_L3_MASK,
@@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = {
 static struct clk trace_clk_div_ck = {
 	.name		= "trace_clk_div_ck",
 	.parent		= &pmd_trace_clk_mux_ck,
+	.clkdm_name	= "emu_sys_clkdm",
 	.clksel		= trace_clk_div_div,
 	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index a7bc096bd40..f24e3f7a2bb 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -22,4 +22,15 @@
  */
 #define MAX_MODULE_READY_TIME		2000
 
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3.  In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME		5000
+
 #endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 8c86d294b1a..1a39945d9ff 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off
 
 	omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
-			  MAX_MODULE_READY_TIME, i);
+			  MAX_MODULE_DISABLE_TIME, i);
 
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 54d49ddb9b8..5fb47a14f4b 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
 		goto err;
 	}
 
-	r = omap_device_register(pdev);
+	r = platform_device_add(pdev);
 	if (r) {
-		pr_err("Could not register omap_device for %s\n", pdev_name);
+		pr_err("Could not register platform_device for %s\n", pdev_name);
 		goto err;
 	}
 
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 845309f146f..88ffa1e645c 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -20,6 +20,9 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0389b3264ab..00486a8564f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void)
 	omap_features |= OMAP3_HAS_SDRC;
 
 	/*
+	 * am35x fixups:
+	 * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+	 *   reserved and therefore return 0 when read.  Unfortunately,
+	 *   OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+	 *   mean that a feature is present even though it isn't so clear
+	 *   the incorrectly set feature bits.
+	 */
+	if (soc_is_am35xx())
+		omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
+	/*
 	 * TODO: Get additional info (where applicable)
 	 *       e.g. Size of L2 cache.
 	 */
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index fdc4303be56..6038a8c84b7 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	ct->chip.irq_ack = omap_mask_ack_irq;
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+	ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
 
 	ct->regs.enable = INTC_MIR_CLEAR0;
 	ct->regs.disable = INTC_MIR_SET0;
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 80e55c5c999..9fe6829f4c1 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -41,6 +41,7 @@
 #include "control.h"
 #include "mux.h"
 #include "prm.h"
+#include "common.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
 #define OMAP_MUX_BASE_SZ		0x5ca
@@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)
 {
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 69fe060a0b7..471e62a74a1 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -59,6 +59,7 @@
 #define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
 
 #define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
 
 /* Flags for omapX_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
@@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
  */
 void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
 
+int omap_mux_get_by_name(const char *muxname,
+		struct omap_mux_partition **found_partition,
+		struct omap_mux **found_mux);
 #else
 
+static inline int omap_mux_get_by_name(const char *muxname,
+		struct omap_mux_partition **found_partition,
+		struct omap_mux **found_mux)
+{
+	return 0;
+}
+
 static inline int omap_mux_init_gpio(int gpio, int val)
 {
 	return 0;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bf86f7e8f91..773193670ea 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
 	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
 		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
 	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 950454a3fa3..f30e861ce6d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0004,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	.name		= "dss_hdmi",
 	.class		= &omap44xx_hdmi_hwmod_class,
 	.clkdm_name	= "l3_dss_clkdm",
+	/*
+	 * HDMI audio requires to use no-idle mode. Hence,
+	 * set idle mode by software.
+	 */
+	.flags		= HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
 	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
 	.main_clk	= "dss_48mhz_clk",
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index a05a62f9ee5..acc216491b8 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
 	u8 multi = error & L3_ERROR_LOG_MULTI;
 	u32 address = omap3_l3_decode_addr(error_addr);
 
-	WARN(true, "%s seen by %s %s at address %x\n",
+	pr_err("%s seen by %s %s at address %x\n",
 			omap3_l3_code_string(code),
 			omap3_l3_initiator_string(initid),
 			multi ? "Multiple Errors" : "", address);
+	WARN_ON(1);
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 4c90477e6f8..d52651a05da 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode)
 
 	devconf2 &= ~CONF2_OTGMODE;
 	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
 	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
 		devconf2 |= CONF2_FORCE_HOST;
 		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
 	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
 		devconf2 |= CONF2_FORCE_DEVICE;
 		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
 	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
 		devconf2 |= CONF2_NO_OVERRIDE;
 		break;
-#endif
 	default:
 		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
 	}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index a34023d0ca7..3a595e89972 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -724,6 +724,7 @@ int __init omap3_pm_init(void)
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
 		omap3_pm_init);
+	enable_irq(omap_prcm_event_to_irq("io"));
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9ce765407ad..21cb74003a5 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,6 +15,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 
 #include "common.h"
 #include <plat/cpu.h>
@@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 
 static int __init omap3xxx_prcm_init(void)
 {
-	if (cpu_is_omap34xx())
-		return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
-	return 0;
+	int ret = 0;
+
+	if (cpu_is_omap34xx()) {
+		ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+		if (!ret)
+			irq_set_status_flags(omap_prcm_event_to_irq("io"),
+					     IRQ_NOAUTOEN);
+	}
+
+	return ret;
 }
 subsys_initcall(omap3xxx_prcm_init);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 292d4aaca06..c1b93c752d7 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -57,6 +57,7 @@ struct omap_uart_state {
 
 	struct list_head node;
 	struct omap_hwmod *oh;
+	struct omap_device_pad default_omap_uart_pads[2];
 };
 
 static LIST_HEAD(uart_list);
@@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN	28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+		tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void  __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+				struct omap_uart_state *uart)
+{
+	uart->default_omap_uart_pads[0].name = rx_pad_name;
+	uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+							OMAP_DEVICE_PAD_WAKEUP;
+	uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+							OMAP_MUX_MODE0;
+	uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+	uart->default_omap_uart_pads[1].name = tx_pad_name;
+	uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+							OMAP_MUX_MODE0;
+	bdata->pads = uart->default_omap_uart_pads;
+	bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void  __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+						struct omap_uart_state *uart)
 {
+	struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+	struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+	char *rx_fmt, *tx_fmt;
+	int uart_nr = bdata->id + 1;
+
+	if (bdata->id != 2) {
+		rx_fmt = "uart%d_rx.uart%d_rx";
+		tx_fmt = "uart%d_tx.uart%d_tx";
+	} else {
+		rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+		tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+	}
+
+	snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+			uart_nr, uart_nr);
+	snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+			uart_nr, uart_nr);
+
+	if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+			omap_mux_get_by_name
+				(tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+		u16 tx_mode, rx_mode;
+
+		tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+		rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+		/*
+		 * Check if uart is used in default tx/rx mode i.e. in mux mode0
+		 * if yes then configure rx pin for wake up capability
+		 */
+		if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+			omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+	}
 }
 #else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+		struct omap_uart_state *uart)
+{
+}
 #endif
 
 static char *cmdline_find_option(char *str)
@@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info)
 		bdata.pads = NULL;
 		bdata.pads_cnt = 0;
 
-		if (cpu_is_omap44xx() || cpu_is_omap34xx())
-			omap_serial_fill_default_pads(&bdata);
+		omap_serial_check_wakeup(&bdata, uart);
 
 		if (!info)
 			omap_serial_init_port(&bdata, NULL);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index b19d1b43c12..c4a57685666 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
 	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
 #endif
 	/* .clock is set dynamically */
 	.config		= &musb_config,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index db84a46ce7f..805bea6edf1 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		printk(error, 3, status);
 		return status;
 	}
-	tusb_resources[2].start = irq + IH_GPIO_BASE;
+	tusb_resources[2].start = gpio_to_irq(irq);
 
 	/* set up memory timings ... can speed them up later */
 	if (!ps_refclk) {
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 96484bcd34c..11a3c1e9801 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -35,5 +35,5 @@
 #define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
 
 #define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE | 0x300)
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 00000000000..1aa5d0a50a0
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT		SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)			 __io(a)
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 2745f5d95b3..683e085ce16 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -82,6 +82,7 @@
 #define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
 
 #define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x20000)
 
 #define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
 
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
index ea1564609bd..9e3ae6bfe50 100644
--- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
  * Debugging macro include header spear13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
index 383ab04dc6c..d50bdb60592 100644
--- a/arch/arm/mach-spear13xx/include/mach/dma.h
+++ b/arch/arm/mach-spear13xx/include/mach/dma.h
@@ -4,7 +4,7 @@
  * DMA information for SPEAr13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index 6d8c45b9f29..dac57fd0cdf 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -4,7 +4,7 @@
  * spear13xx machine family generic header file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h
index cd6f4f86a56..85f176311f6 100644
--- a/arch/arm/mach-spear13xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear13xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
  * GPIO macros for SPEAr13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
index f542a24aa5f..271a62b4cd3 100644
--- a/arch/arm/mach-spear13xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear13xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
  * IRQ helper macros for spear13xx machine family
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
index 30c57ef7268..65f27def239 100644
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ b/arch/arm/mach-spear13xx/include/mach/spear.h
@@ -4,7 +4,7 @@
  * spear13xx Machine family specific definition
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
index 31af3e8d976..3a58b8284a6 100644
--- a/arch/arm/mach-spear13xx/include/mach/timex.h
+++ b/arch/arm/mach-spear13xx/include/mach/timex.h
@@ -4,7 +4,7 @@
  * SPEAr3XX machine family specific timex definitions
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
index c7840896ae6..70fe72f05de 100644
--- a/arch/arm/mach-spear13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index fefd15b2f38..732d29bc733 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -4,7 +4,7 @@
  * SPEAr1310 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index ee38cbc5686..81e4ed76ad0 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -4,7 +4,7 @@
  * SPEAr1340 machine source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index 50b349ae863..cf936b106e2 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -4,7 +4,7 @@
  * SPEAr13XX machines common source file
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
index 590519f10d6..0a6381fad5d 100644
--- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
@@ -4,7 +4,7 @@
  * Debugging macro include header spear3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 4a95b9453c2..ce19113ca79 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -4,7 +4,7 @@
  * SPEAr3XX machine family generic header file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
index 451b2081bfc..2ac74c6db7f 100644
--- a/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear3xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
  * GPIO macros for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 51bd62a0254..803de76f5f3 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -4,7 +4,7 @@
  * IRQ helper macros for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 18e2ac576f2..6309bf68d6f 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
  * Miscellaneous registers definitions for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 51eb953148a..8cca95193d4 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -4,7 +4,7 @@
  * SPEAr3xx Machine family specific definition
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
index a38cc9de876..9f5d08bd0c4 100644
--- a/arch/arm/mach-spear3xx/include/mach/timex.h
+++ b/arch/arm/mach-spear3xx/include/mach/timex.h
@@ -4,7 +4,7 @@
  * SPEAr3XX machine family specific timex definitions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
index 53ba8bbc0df..b909b011f7c 100644
--- a/arch/arm/mach-spear3xx/include/mach/uncompress.h
+++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f74a05bdb82..0f882ecb7d8 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -4,7 +4,7 @@
  * SPEAr300 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 84dfb090074..bbcf4571d36 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -4,7 +4,7 @@
  * SPEAr310 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index a88fa841d29..88d483bcd66 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -4,7 +4,7 @@
  * SPEAr320 machine source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index f22419ed74a..0f41bd1c47c 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -4,7 +4,7 @@
  * SPEAr3XX machines common source file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
index 3a789dbb69f..d42cefc0356 100644
--- a/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ b/arch/arm/mach-spear6xx/include/mach/gpio.h
@@ -4,7 +4,7 @@
  * GPIO macros for SPEAr6xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 179e45774b3..c34acc201d3 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -4,7 +4,7 @@
  * Miscellaneous registers definitions for SPEAr6xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 4d6a2ee99c3..5beb7ebe294 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -33,7 +33,7 @@
 
 static bool is_enabled;
 
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
 {
 	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
 	void __iomem *evp_cpu_reset =
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index c8a8fde777b..10ddfaf17f3 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -594,43 +594,12 @@ static void ux500_uart0_reset(void)
 	udelay(1);
 }
 
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
-	int ret;
-
-	if (IS_ERR(u0_p) || IS_ERR(u0_def))
-		return;
-
-	ret = pinctrl_select_state(u0_p, u0_def);
-	if (ret)
-		pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
-	int ret;
-
-	if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
-		return;
-
-	ret = pinctrl_select_state(u0_p, u0_sleep);
-	if (ret)
-		pr_err("could not set UART0 idlestate\n");
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-	.init = ux500_uart0_init,
-	.exit = ux500_uart0_exit,
 	.reset = ux500_uart0_reset,
 };
 
@@ -652,28 +621,7 @@ static struct amba_pl011_data uart2_plat = {
 
 static void __init mop500_uart_init(struct device *parent)
 {
-	struct amba_device *uart0_device;
-
-	uart0_device = db8500_add_uart0(parent, &uart0_plat);
-	if (uart0_device) {
-		u0_p = pinctrl_get(&uart0_device->dev);
-		if (IS_ERR(u0_p))
-			dev_err(&uart0_device->dev,
-				"could not get UART0 pinctrl\n");
-		else {
-			u0_def = pinctrl_lookup_state(u0_p,
-						      PINCTRL_STATE_DEFAULT);
-			if (IS_ERR(u0_def)) {
-				dev_err(&uart0_device->dev,
-					"could not get UART0 defstate\n");
-			}
-			u0_sleep = pinctrl_lookup_state(u0_p,
-							PINCTRL_STATE_SLEEP);
-			if (IS_ERR(u0_sleep))
-				dev_err(&uart0_device->dev,
-					"could not get UART0 idlestate\n");
-		}
-	}
+	db8500_add_uart0(parent, &uart0_plat);
 	db8500_add_uart1(parent, &uart1_plat);
 	db8500_add_uart2(parent, &uart2_plat);
 }
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index cf4687ee2a7..cd8ea3588f9 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
 		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
 		.type		= MT_DEVICE
-	},
-#if 0
- 	{
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE0,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
 	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE1,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE2,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
-		.length		= SZ_16M,
+		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
+		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+		.length		= IO_SPACE_LIMIT,
 		.type		= MT_DEVICE
 	},
 #endif
-#endif
 };
 
 void __init versatile_map_io(void)
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 4d4973dd8fb..408e58da46c 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -29,8 +29,9 @@
  */
 #define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
 #define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0	(void __iomem *)PCIO_BASE
 
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
 #define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
 
 #define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 00000000000..0406513be7d
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE	0xeb000000ul
+
+#define __io(a)		((a) + PCIO_BASE)
+
+#endif
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 15c6a00000e..bec933b04ef 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = {
 	.write	= versatile_write_config,
 };
 
+static struct resource io_port = {
+	.name	= "PCI",
+	.start	= 0,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
 static struct resource io_mem = {
 	.name	= "PCI I/O space",
 	.start	= VERSATILE_PCI_MEM_BASE0,
 	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
-	.flags	= IORESOURCE_IO,
+	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource non_mem = {
@@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 		       "memory region (%d)\n", ret);
 		goto out;
 	}
+	ret = request_resource(&ioport_resource, &io_port);
+	if (ret) {
+		printk(KERN_ERR "PCI: unable to allocate I/O "
+		       "port region (%d)\n", ret);
+		goto out;
+	}
 	ret = request_resource(&iomem_resource, &non_mem);
 	if (ret) {
 		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
@@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 	 * the mem resource for this bus
 	 * the prefetch mem resource for this bus
 	 */
-	pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+	pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
 
@@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
+		sys->io_offset = 0;
 		ret = pci_versatile_setup_resources(sys);
 		if (ret < 0) {
 			printk("pci_versatile_setup: resources... oops?\n");
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 106c4c0ebcc..d766e4256b7 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -228,7 +228,7 @@ static pte_t **consistent_pte;
 
 #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
 
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
 
 void __init init_consistent_dma_size(unsigned long size)
 {
@@ -321,7 +321,7 @@ static struct arm_vmregion_head coherent_head = {
 	.vm_list	= LIST_HEAD_INIT(coherent_head.vm_list),
 };
 
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
 
 static int __init early_coherent_pool(char *p)
 {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index c21d06c7dd7..f54d5921976 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -212,7 +212,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);
  * allocations.  This must be the smallest DMA mask in the system,
  * so a successful GFP_DMA allocation will always satisfy this.
  */
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
 
 static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 	unsigned long dma_size)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 93dc0c17cdc..c471436c795 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -62,7 +62,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 #endif
 
 #ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
 #else
 #define arm_dma_limit ((u32)~0)
 #endif
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 62135849f48..c641fb68501 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -762,6 +762,11 @@ b_epilogue:
 			update_on_xread(ctx);
 			emit(ARM_MOV_R(r_A, r_X), ctx);
 			break;
+		case BPF_S_ANC_ALU_XOR_X:
+			/* A ^= X */
+			update_on_xread(ctx);
+			emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+			break;
 		case BPF_S_ANC_PROTOCOL:
 			/* A = ntohs(skb->protocol) */
 			ctx->seen |= SEEN_SKB;
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
index 99ae5e3f46d..7fa2f7d3cb9 100644
--- a/arch/arm/net/bpf_jit_32.h
+++ b/arch/arm/net/bpf_jit_32.h
@@ -68,6 +68,8 @@
 #define ARM_INST_CMP_R		0x01500000
 #define ARM_INST_CMP_I		0x03500000
 
+#define ARM_INST_EOR_R		0x00200000
+
 #define ARM_INST_LDRB_I		0x05d00000
 #define ARM_INST_LDRB_R		0x07d00000
 #define ARM_INST_LDRH_I		0x01d000b0
@@ -132,6 +134,8 @@
 #define ARM_CMP_R(rn, rm)	_AL3_R(ARM_INST_CMP, 0, rn, rm)
 #define ARM_CMP_I(rn, imm)	_AL3_I(ARM_INST_CMP, 0, rn, imm)
 
+#define ARM_EOR_R(rd, rn, rm)	_AL3_R(ARM_INST_EOR, rd, rn, rm)
+
 #define ARM_LDR_I(rt, rn, off)	(ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
 				 | (off))
 #define ARM_LDRB_I(rt, rn, off)	(ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index 9129c9e7d53..88726f4dbbf 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -50,6 +50,7 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/time.h>
@@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
 {
+	struct clk *timer_clk;
+
+	timer_clk = clk_get_sys("imx-epit.0", NULL);
+	if (IS_ERR(timer_clk)) {
+		pr_err("i.MX epit: unable to get clk\n");
+		return;
+	}
+
 	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cf663d84e7c..e429ca1b814 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -54,8 +54,8 @@ extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
 extern void imx53_soc_init(void);
 extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx25_clocks_init(void);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 99f958ca6cb..00e8e659e66 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -58,6 +58,7 @@
 /* MX31, MX35, MX25, MX5 */
 #define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
 #define V2_TCTL_CLK_IPG		(1 << 6)
+#define V2_TCTL_CLK_PER		(2 << 6)
 #define V2_TCTL_FRR		(1 << 9)
 #define V2_IR			0x0c
 #define V2_TSTAT		0x08
@@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
+	struct clk *timer_clk;
 	struct clk *timer_ipg_clk;
 
-	if (!timer_clk) {
-		timer_clk = clk_get_sys("imx-gpt.0", "per");
-		if (IS_ERR(timer_clk)) {
-			pr_err("i.MX timer: unable to get clk\n");
-			return;
-		}
-
-		timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
-		if (!IS_ERR(timer_ipg_clk))
-			clk_prepare_enable(timer_ipg_clk);
+	timer_clk = clk_get_sys("imx-gpt.0", "per");
+	if (IS_ERR(timer_clk)) {
+		pr_err("i.MX timer: unable to get clk\n");
+		return;
 	}
 
+	timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+	if (!IS_ERR(timer_ipg_clk))
+		clk_prepare_enable(timer_ipg_clk);
+
 	clk_prepare_enable(timer_clk);
 
 	timer_base = base;
@@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
 	if (timer_is_v2())
-		tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+		tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c45279..706b7e29397 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
 	struct clk *c;
 	struct clk *pa;
 
+	mutex_lock(&clocks_mutex);
 	seq_printf(s, "%-30s %-30s %-10s %s\n",
 		"clock-name", "parent-name", "rate", "use-count");
 
@@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
 		seq_printf(s, "%-30s %-30s %-10lu %d\n",
 			c->name, pa ? pa->name : "none", c->rate, c->usecount);
 	}
+	mutex_unlock(&clocks_mutex);
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 297245dba66..de6c0a08f46 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335)
  * cpu_is_omap2423():	True for OMAP2423
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
- * cpu_is_omap3505():	True for OMAP3505
- * cpu_is_omap3517():	True for OMAP3517
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422)
 IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
@@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define cpu_is_omap2422()		0
 #define cpu_is_omap2423()		0
 #define cpu_is_omap2430()		0
-#define cpu_is_omap3503()		0
-#define cpu_is_omap3515()		0
-#define cpu_is_omap3525()		0
-#define cpu_is_omap3530()		0
-#define cpu_is_omap3505()		0
-#define cpu_is_omap3517()		0
 #define cpu_is_omap3430()		0
 #define cpu_is_omap3630()		0
 
@@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517)
 
 #if defined(CONFIG_ARCH_OMAP3)
 # undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
 # undef cpu_is_ti81xx
 # undef cpu_is_ti816x
 # undef cpu_is_ti814x
@@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517)
 # undef cpu_is_am33xx
 # undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
-# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
-						(!omap3_has_iva()) &&	\
-						(!omap3_has_sgx()))
-# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
-						(!omap3_has_iva()) &&	\
-						(omap3_has_sgx()))
-# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
-						(!omap3_has_sgx()) &&	\
-						(omap3_has_iva()))
-# define cpu_is_omap3530()		(cpu_is_omap3430())
-# define cpu_is_omap3517()		is_omap3517()
-# define cpu_is_omap3505()		(cpu_is_omap3517() &&		\
-						!omap3_has_sgx())
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
 # define cpu_is_ti81xx()		is_ti81xx()
@@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
 #define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
 
-#define OMAP3517_CLASS		0x35170034
-#define OMAP3517_REV_ES1_0	OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1	(OMAP3517_CLASS | (0x1 << 8))
-
 #define TI816X_CLASS		0x81600034
 #define TI8168_REV_ES1_0	TI816X_CLASS
 #define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a7754a886d4..5493bd95da5 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -172,8 +172,7 @@ struct omap_mmc_platform_data {
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
 					int is_closed);
 
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
@@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
 }
-
 #endif
 
 extern int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 61fd837624a..c1793786aea 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase)
  * Watchdog
  ****************************************************************************/
 static struct resource orion_wdt_resource =
-		DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
 
 static struct platform_device orion_wdt_device = {
 	.name		= "orion_wdt",
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 58b79809d20..584c9bf8ed2 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = {
 	{ "pxa25x-nssp",	PXA25x_NSSP },
 	{ "pxa27x-ssp",		PXA27x_SSP },
 	{ "pxa168-ssp",		PXA168_SSP },
+	{ "pxa910-ssp",		PXA910_SSP },
 	{ },
 };
 
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index ab3de721c5d..75b05ad0fba 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -4,7 +4,7 @@
  * Debugging macro include header for spear platform
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
index e14a3e4932f..2bc6b54460a 100644
--- a/arch/arm/plat-spear/include/plat/pl080.h
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h
index 03ed8b585dc..88a7fbd2479 100644
--- a/arch/arm/plat-spear/include/plat/shirq.h
+++ b/arch/arm/plat-spear/include/plat/shirq.h
@@ -4,7 +4,7 @@
  * SPEAr platform shared irq layer header file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
index 914d09dd50f..ef95e5b780b 100644
--- a/arch/arm/plat-spear/include/plat/timex.h
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -4,7 +4,7 @@
  * SPEAr platform specific timex definitions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 6dd455bafdf..2ce6cb17a98 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -4,7 +4,7 @@
  * Serial port stubs for kernel decompress status messages
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
index a56a067717c..12cf27f935f 100644
--- a/arch/arm/plat-spear/pl080.c
+++ b/arch/arm/plat-spear/pl080.c
@@ -4,7 +4,7 @@
  * DMAC pl080 definitions for SPEAr platform
  *
  * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index ea0a61302b7..4f990115b1b 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -4,7 +4,7 @@
  * SPEAr platform specific restart functions
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c
index 961fb726124..853e891e118 100644
--- a/arch/arm/plat-spear/shirq.c
+++ b/arch/arm/plat-spear/shirq.c
@@ -4,7 +4,7 @@
  * SPEAr platform shared irq layer source file
  *
  * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index 68d651081bd..d0b1607f271 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -35,6 +35,7 @@
 #include <asm/setup.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
 #if defined(__H8300H__)
 #define CPU "H8/300H"
@@ -54,7 +55,6 @@ unsigned long memory_end;
 
 char __initdata command_line[COMMAND_LINE_SIZE];
 
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
 extern int _ramstart, _ramend;
 extern char _target_name[];
 extern void h8300_gpio_init(void);
@@ -119,9 +119,9 @@ void __init setup_arch(char **cmdline_p)
 	    memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; 
 #endif
 
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
+	init_mm.start_code = (unsigned long) _stext;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = (unsigned long) 0; 
 
 #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
@@ -134,15 +134,12 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
 
 #ifdef DEBUG
-	printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
-		"BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
-		(int) &_sdata, (int) &_edata,
-		(int) &_sbss, (int) &_ebss);
-	printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
-		"STACK=0x%06x-0x%06x\n",
-	       (int) &_ebss, (int) memory_start,
-		(int) memory_start, (int) memory_end,
-		(int) memory_end, (int) &_ramend);
+	printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+		"BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+		__bss_stop);
+	printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+		"STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+		memory_end, memory_end, &_ramend);
 #endif
 
 #ifdef CONFIG_DEFAULT_CMDLINE
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index 973369c32a9..981e25094b1 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -36,6 +36,7 @@
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 
 #undef DEBUG
 
@@ -123,7 +124,6 @@ void __init mem_init(void)
 	int codek = 0, datak = 0, initk = 0;
 	/* DAVIDM look at setup memory map generically with reserved area */
 	unsigned long tmp;
-	extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
 	extern unsigned long  _ramend, _ramstart;
 	unsigned long len = &_ramend - &_ramstart;
 	unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
@@ -142,9 +142,9 @@ void __init mem_init(void)
 	/* this will put all memory onto the freelists */
 	totalram_pages = free_all_bootmem();
 
-	codek = (&_etext - &_stext) >> 10;
-	datak = (&_ebss - &_sdata) >> 10;
-	initk = (&__init_begin - &__init_end) >> 10;
+	codek = (_etext - _stext) >> 10;
+	datak = (__bss_stop - _sdata) >> 10;
+	initk = (__init_begin - __init_end) >> 10;
 
 	tmp = nr_free_pages() << PAGE_SHIFT;
 	printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
@@ -178,22 +178,21 @@ free_initmem(void)
 {
 #ifdef CONFIG_RAMKERNEL
 	unsigned long addr;
-	extern char __init_begin, __init_end;
 /*
  *	the following code should be cool even if these sections
  *	are not page aligned.
  */
-	addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+	addr = PAGE_ALIGN((unsigned long)(__init_begin));
 	/* next to check that the page we free is not a partial page */
-	for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+	for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
 		free_page(addr);
 		totalram_pages++;
 	}
 	printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
-			(addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
-			(int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+			(addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+			(int)(PAGE_ALIGN((unsigned long)__init_begin)),
 			(int)(addr - PAGE_SIZE));
 #endif
 }
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index cac5b6be572..14712012826 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -7,6 +7,8 @@ config M68K
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select FPU if MMU
 	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
 
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index 1a922fad76f..eafa2539a8e 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,2 +1,4 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
+
+generic-y += word-at-a-time.h
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d63b99ff7ff..497c31c803f 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -86,7 +86,7 @@
 /*
  *	QSPI module.
  */
-#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
 #define	MCFQSPI_SIZE		0x40
 
 #define	MCFQSPI_CS0		147
diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h
index 9c80cd515b2..472c891a4ae 100644
--- a/arch/m68k/include/asm/uaccess_mm.h
+++ b/arch/m68k/include/asm/uaccess_mm.h
@@ -379,12 +379,15 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
 #define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
 #define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
 
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
+#define user_addr_max() \
+	(segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 unsigned long __clear_user(void __user *to, unsigned long n);
 
 #define clear_user	__clear_user
 
-#define strlen_user(str) strnlen_user(str, 32767)
-
 #endif /* _M68K_UACCESS_H */
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 8b4a2222e65..1bc10e62b9a 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -286,7 +286,7 @@ asmlinkage void syscall_trace(void)
 	}
 }
 
-#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
 asmlinkage int syscall_trace_enter(void)
 {
 	int ret = 0;
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index d7deb7fc7eb..707f0573ec6 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -85,7 +85,7 @@ void __init time_init(void)
 	mach_sched_init(timer_interrupt);
 }
 
-#ifdef CONFIG_M68KCLASSIC
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 
 u32 arch_gettimeoffset(void)
 {
@@ -108,4 +108,4 @@ static int __init rtc_init(void)
 
 module_init(rtc_init);
 
-#endif /* CONFIG_M68KCLASSIC */
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c
index 5664386338d..5e97f2ee7c1 100644
--- a/arch/m68k/lib/uaccess.c
+++ b/arch/m68k/lib/uaccess.c
@@ -104,80 +104,6 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from,
 EXPORT_SYMBOL(__generic_copy_to_user);
 
 /*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	char c;
-
-	if (count <= 0)
-		return count;
-
-	asm volatile ("\n"
-		"1:	"MOVES".b	(%2)+,%4\n"
-		"	move.b	%4,(%1)+\n"
-		"	jeq	2f\n"
-		"	subq.l	#1,%3\n"
-		"	jne	1b\n"
-		"2:	sub.l	%3,%0\n"
-		"3:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	move.l	%5,%0\n"
-		"	jra	3b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.previous"
-		: "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
-		: "i" (-EFAULT), "0" (count));
-
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
-	char c;
-	long res;
-
-	asm volatile ("\n"
-		"1:	subq.l	#1,%1\n"
-		"	jmi	3f\n"
-		"2:	"MOVES".b	(%0)+,%2\n"
-		"	tst.b	%2\n"
-		"	jne	1b\n"
-		"	jra	4f\n"
-		"\n"
-		"3:	addq.l	#1,%0\n"
-		"4:	sub.l	%4,%0\n"
-		"5:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"20:	sub.l	%0,%0\n"
-		"	jra	5b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	2b,20b\n"
-		"	.previous\n"
-		: "=&a" (res), "+d" (n), "=&d" (c)
-		: "0" (src), "r" (src));
-
-	return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
-/*
  * Zero Userspace
  */
 
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index c801c172b82..f4dc9b29560 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -53,6 +53,7 @@
 #endif
 
 static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
 
 /***************************************************************************/
 
@@ -62,7 +63,7 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 	TSTAT &= 0;
 
 	m68328_tick_cnt += TICKS_PER_JIFFY;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 /***************************************************************************/
@@ -99,7 +100,7 @@ static struct clocksource m68328_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	/* disable timer 1 */
 	TCTL = 0;
@@ -115,6 +116,7 @@ void hw_timer_init(void)
 	/* Enable timer 1 */
 	TCTL |= TCTL_TEN;
 	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+	timer_interrupt = handler;
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
index 255fc03913e..9877cefad1e 100644
--- a/arch/m68k/platform/68360/config.c
+++ b/arch/m68k/platform/68360/config.c
@@ -35,6 +35,7 @@ extern void m360_cpm_reset(void);
 #define OSCILLATOR  (unsigned long int)33000000
 #endif
 
+static irq_handler_t timer_interrupt;
 unsigned long int system_clock;
 
 extern QUICC *pquicc;
@@ -52,7 +53,7 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 
   pquicc->timer_ter1 = 0x0002; /* clear timer event */
 
-  return arch_timer_interrupt(irq, dummy);
+  return timer_interrupt(irq, dummy);
 }
 
 static struct irqaction m68360_timer_irq = {
@@ -61,7 +62,7 @@ static struct irqaction m68360_timer_irq = {
 	.handler = hw_tick,
 };
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
   unsigned char prescaler;
   unsigned short tgcr_save;
@@ -94,6 +95,8 @@ void hw_timer_init(void)
 
   pquicc->timer_ter1 = 0x0003; /* clear timer events */
 
+  timer_interrupt = handler;
+
   /* enable timer 1 interrupt in CIMR */
   setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
 
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index c9aac24b02e..32b394f3b85 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -100,6 +100,9 @@ static inline void hard_irq_disable(void)
 	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
 }
 
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable	hard_irq_disable
+
 /*
  * This is called by asynchronous interrupts to conditionally
  * re-enable hard interrupts when soft-disabled after having
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index c6af1d62383..3abe1b86e58 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -268,24 +268,45 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu *vcpu,
 	return err;
 }
 
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
 {
+	struct kvm *kvm = vcpu->kvm;
 	void *va;
 	unsigned long nb;
+	unsigned long gpa;
 
-	vpap->update_pending = 0;
-	va = NULL;
-	if (vpap->next_gpa) {
-		va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
-		if (nb < vpap->len) {
-			/*
-			 * If it's now too short, it must be that userspace
-			 * has changed the mappings underlying guest memory,
-			 * so unregister the region.
-			 */
+	/*
+	 * We need to pin the page pointed to by vpap->next_gpa,
+	 * but we can't call kvmppc_pin_guest_page under the lock
+	 * as it does get_user_pages() and down_read().  So we
+	 * have to drop the lock, pin the page, then get the lock
+	 * again and check that a new area didn't get registered
+	 * in the meantime.
+	 */
+	for (;;) {
+		gpa = vpap->next_gpa;
+		spin_unlock(&vcpu->arch.vpa_update_lock);
+		va = NULL;
+		nb = 0;
+		if (gpa)
+			va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+		spin_lock(&vcpu->arch.vpa_update_lock);
+		if (gpa == vpap->next_gpa)
+			break;
+		/* sigh... unpin that one and try again */
+		if (va)
 			kvmppc_unpin_guest_page(kvm, va);
-			va = NULL;
-		}
+	}
+
+	vpap->update_pending = 0;
+	if (va && nb < vpap->len) {
+		/*
+		 * If it's now too short, it must be that userspace
+		 * has changed the mappings underlying guest memory,
+		 * so unregister the region.
+		 */
+		kvmppc_unpin_guest_page(kvm, va);
+		va = NULL;
 	}
 	if (vpap->pinned_addr)
 		kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
@@ -296,20 +317,18 @@ static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
 
 static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
 {
-	struct kvm *kvm = vcpu->kvm;
-
 	spin_lock(&vcpu->arch.vpa_update_lock);
 	if (vcpu->arch.vpa.update_pending) {
-		kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
 		init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
 	}
 	if (vcpu->arch.dtl.update_pending) {
-		kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
 		vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
 		vcpu->arch.dtl_index = 0;
 	}
 	if (vcpu->arch.slb_shadow.update_pending)
-		kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+		kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
 	spin_unlock(&vcpu->arch.vpa_update_lock);
 }
 
@@ -800,12 +819,39 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc)
 	struct kvm_vcpu *vcpu, *vcpu0, *vnext;
 	long ret;
 	u64 now;
-	int ptid, i;
+	int ptid, i, need_vpa_update;
 
 	/* don't start if any threads have a signal pending */
-	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+	need_vpa_update = 0;
+	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
 		if (signal_pending(vcpu->arch.run_task))
 			return 0;
+		need_vpa_update |= vcpu->arch.vpa.update_pending |
+			vcpu->arch.slb_shadow.update_pending |
+			vcpu->arch.dtl.update_pending;
+	}
+
+	/*
+	 * Initialize *vc, in particular vc->vcore_state, so we can
+	 * drop the vcore lock if necessary.
+	 */
+	vc->n_woken = 0;
+	vc->nap_count = 0;
+	vc->entry_exit_count = 0;
+	vc->vcore_state = VCORE_RUNNING;
+	vc->in_guest = 0;
+	vc->napping_threads = 0;
+
+	/*
+	 * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+	 * which can't be called with any spinlocks held.
+	 */
+	if (need_vpa_update) {
+		spin_unlock(&vc->lock);
+		list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+			kvmppc_update_vpas(vcpu);
+		spin_lock(&vc->lock);
+	}
 
 	/*
 	 * Make sure we are running on thread 0, and that
@@ -838,20 +884,10 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc)
 		if (vcpu->arch.ceded)
 			vcpu->arch.ptid = ptid++;
 
-	vc->n_woken = 0;
-	vc->nap_count = 0;
-	vc->entry_exit_count = 0;
-	vc->vcore_state = VCORE_RUNNING;
 	vc->stolen_tb += mftb() - vc->preempt_tb;
-	vc->in_guest = 0;
 	vc->pcpu = smp_processor_id();
-	vc->napping_threads = 0;
 	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
 		kvmppc_start_thread(vcpu);
-		if (vcpu->arch.vpa.update_pending ||
-		    vcpu->arch.slb_shadow.update_pending ||
-		    vcpu->arch.dtl.update_pending)
-			kvmppc_update_vpas(vcpu);
 		kvmppc_create_dtl_entry(vcpu, vc);
 	}
 	/* Grab any remaining hw threads so they can't go into the kernel */
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 36f957f3184..8733a86ad52 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -68,9 +68,7 @@ static const char *pseries_nvram_os_partitions[] = {
 };
 
 static void oops_to_nvram(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason,
-		const char *old_msgs, unsigned long old_len,
-		const char *new_msgs, unsigned long new_len);
+			  enum kmsg_dump_reason reason);
 
 static struct kmsg_dumper nvram_kmsg_dumper = {
 	.dump = oops_to_nvram
@@ -504,28 +502,6 @@ int __init pSeries_nvram_init(void)
 }
 
 /*
- * Try to capture the last capture_len bytes of the printk buffer.  Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
-				const char *new_msgs, size_t new_len,
-				char *captured, size_t capture_len)
-{
-	if (new_len >= capture_len) {
-		memcpy(captured, new_msgs + (new_len - capture_len),
-								capture_len);
-		return capture_len;
-	} else {
-		/* Grab the end of old_msgs. */
-		size_t old_tail_len = min(old_len, capture_len - new_len);
-		memcpy(captured, old_msgs + (old_len - old_tail_len),
-								old_tail_len);
-		memcpy(captured + old_tail_len, new_msgs, new_len);
-		return old_tail_len + new_len;
-	}
-}
-
-/*
  * Are we using the ibm,rtas-log for oops/panic reports?  And if so,
  * would logging this oops/panic overwrite an RTAS event that rtas_errd
  * hasn't had a chance to read and process?  Return 1 if so, else 0.
@@ -541,27 +517,6 @@ static int clobbering_unread_rtas_event(void)
 						NVRAM_RTAS_READ_TIMEOUT);
 }
 
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
-	char *in, *out, *buf_end = buf + len;
-	/* Assume a <n> at the very beginning marks the start of a line. */
-	int newline = 1;
-
-	in = out = buf;
-	while (in < buf_end) {
-		if (newline && in+3 <= buf_end &&
-				*in == '<' && isdigit(in[1]) && in[2] == '>') {
-			in += 3;
-			newline = 0;
-		} else {
-			newline = (*in == '\n');
-			*out++ = *in++;
-		}
-	}
-	return out - buf;
-}
-
 /* Derived from logfs_compress() */
 static int nvram_compress(const void *in, void *out, size_t inlen,
 							size_t outlen)
@@ -619,9 +574,7 @@ static int zip_oops(size_t text_len)
  * partition.  If that's too much, go back and capture uncompressed text.
  */
 static void oops_to_nvram(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason,
-		const char *old_msgs, unsigned long old_len,
-		const char *new_msgs, unsigned long new_len)
+			  enum kmsg_dump_reason reason)
 {
 	static unsigned int oops_count = 0;
 	static bool panicking = false;
@@ -660,14 +613,14 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 		return;
 
 	if (big_oops_buf) {
-		text_len = capture_last_msgs(old_msgs, old_len,
-			new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
-		text_len = elide_severities(big_oops_buf, text_len);
+		kmsg_dump_get_buffer(dumper, false,
+				     big_oops_buf, big_oops_buf_sz, &text_len);
 		rc = zip_oops(text_len);
 	}
 	if (rc != 0) {
-		text_len = capture_last_msgs(old_msgs, old_len,
-				new_msgs, new_len, oops_data, oops_data_sz);
+		kmsg_dump_rewind(dumper);
+		kmsg_dump_get_buffer(dumper, true,
+				     oops_data, oops_data_sz, &text_len);
 		err_type = ERR_TYPE_KERNEL_PANIC;
 		*oops_len = (u16) text_len;
 	}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 99bcd0ee838..31d9db7913e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -32,6 +32,8 @@ config SUPERH
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 46edf070da1..aed701c7b11 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -9,6 +9,12 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
+ifneq ($(SUBARCH),$(ARCH))
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+  endif
+endif
+
 isa-y					:= any
 isa-$(CONFIG_SH_DSP)			:= sh
 isa-$(CONFIG_CPU_SH2)			:= sh2
@@ -106,19 +112,13 @@ LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
 KBUILD_DEFCONFIG	:= cayman_defconfig
 endif
 
-ifneq ($(SUBARCH),$(ARCH))
-  ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
-  endif
-endif
-
 ifdef CONFIG_CPU_LITTLE_ENDIAN
 ld-bfd			:= elf32-$(UTS_MACHINE)-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
 LDFLAGS			+= -EL
 else
 ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
 LDFLAGS			+= -EB
 endif
 
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 7beb42322f6..7b673ddcd55 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,5 +1,39 @@
 include include/asm-generic/Kbuild.asm
 
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
+generic-y += xor.h
+
 header-y += cachectl.h
 header-y += cpu-features.h
 header-y += hw_breakpoint.h
diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0c13b..00000000000
--- a/arch/sh/include/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h
deleted file mode 100644
index 6ca395d1393..00000000000
--- a/arch/sh/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */
diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h
deleted file mode 100644
index 4c51401b553..00000000000
--- a/arch/sh/include/asm/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/current.h>
diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h
deleted file mode 100644
index 9670e127b7b..00000000000
--- a/arch/sh/include/asm/delay.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/delay.h>
diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb2..00000000000
--- a/arch/sh/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c48e42..00000000000
--- a/arch/sh/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h
deleted file mode 100644
index 51cf6f9cebb..00000000000
--- a/arch/sh/include/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */
diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h
deleted file mode 100644
index 46ab12db573..00000000000
--- a/arch/sh/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h
deleted file mode 100644
index b279fe06dfe..00000000000
--- a/arch/sh/include/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51cb6d..00000000000
--- a/arch/sh/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b7027..00000000000
--- a/arch/sh/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/sh/include/asm/kvm_para.h b/arch/sh/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f0b95..00000000000
--- a/arch/sh/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h
deleted file mode 100644
index 9ed9b9cb459..00000000000
--- a/arch/sh/include/asm/local.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-
diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h
deleted file mode 100644
index 36c93b5cc23..00000000000
--- a/arch/sh/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
deleted file mode 100644
index 8eebf89f5ab..00000000000
--- a/arch/sh/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h
deleted file mode 100644
index 809134c644a..00000000000
--- a/arch/sh/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/msgbuf.h>
diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h
deleted file mode 100644
index 965d4542797..00000000000
--- a/arch/sh/include/asm/param.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/param.h>
diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h
deleted file mode 100644
index cf252af6459..00000000000
--- a/arch/sh/include/asm/parport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/parport.h>
diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h
deleted file mode 100644
index 4db4b39a439..00000000000
--- a/arch/sh/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */
diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h
deleted file mode 100644
index c98509d3149..00000000000
--- a/arch/sh/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h
deleted file mode 100644
index 9c2499a86ec..00000000000
--- a/arch/sh/include/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
deleted file mode 100644
index 98dfc3510f1..00000000000
--- a/arch/sh/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SH_SCATTERLIST_H */
diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h
deleted file mode 100644
index 7673b83cfef..00000000000
--- a/arch/sh/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sembuf.h>
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
deleted file mode 100644
index a0cb0caff15..00000000000
--- a/arch/sh/include/asm/serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/serial.h>
diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h
deleted file mode 100644
index 83c05fc2de3..00000000000
--- a/arch/sh/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/shmbuf.h>
diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h
deleted file mode 100644
index 813040ed68a..00000000000
--- a/arch/sh/include/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */
diff --git a/arch/sh/include/asm/sizes.h b/arch/sh/include/asm/sizes.h
deleted file mode 100644
index dd248c2e108..00000000000
--- a/arch/sh/include/asm/sizes.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/sizes.h>
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
deleted file mode 100644
index 6b71384b9d8..00000000000
--- a/arch/sh/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/socket.h>
diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h
deleted file mode 100644
index 9202a023328..00000000000
--- a/arch/sh/include/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */
diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h
deleted file mode 100644
index 3935b106de7..00000000000
--- a/arch/sh/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/termbits.h>
diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h
deleted file mode 100644
index 280d78a9d96..00000000000
--- a/arch/sh/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/termios.h>
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 050f221fa89..8698a80ed00 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -25,6 +25,8 @@
 	(__chk_user_ptr(addr),		\
 	 __access_ok((unsigned long __force)(addr), (size)))
 
+#define user_addr_max()	(current_thread_info()->addr_limit.seg)
+
 /*
  * Uh, these should become the main single-value transfer routines ...
  * They automatically use the right size if we just have the right
@@ -100,6 +102,11 @@ struct __large_struct { unsigned long buf[100]; };
 # include "uaccess_64.h"
 #endif
 
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 /* Generic arbitrary sized copy.  */
 /* Return the number of bytes NOT copied */
 __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
@@ -137,37 +144,6 @@ __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
 	__cl_size;							\
 })
 
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count)				\
-({									\
-	unsigned long __sfu_src = (unsigned long)(src);			\
-	int __sfu_count = (int)(count);					\
-	long __sfu_res = -EFAULT;					\
-									\
-	if (__access_ok(__sfu_src, __sfu_count))			\
-		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
-				__sfu_src, __sfu_count);		\
-									\
-	__sfu_res;							\
-})
-
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
@@ -192,43 +168,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 	return __copy_size;
 }
 
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
index ae0d24f6653..c0de7ee35ab 100644
--- a/arch/sh/include/asm/uaccess_32.h
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -170,79 +170,4 @@ __asm__ __volatile__( \
 
 extern void __put_user_unknown(void);
 
-static inline int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s, _c;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%4\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%4, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%9, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"cmp/eq	%4, %0\n\t"
-		"bt/s	2f\n\t"
-		" add	#1, %0\n\t"
-		"tst	%1, %1\n\t"
-		"bf	1b\n\t"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
 #endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 56fd20b8cdc..2e07e0f40c6 100644
--- a/arch/sh/include/asm/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -84,8 +84,4 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
-extern long __strnlen_user(const char *__s, long __n);
-extern int __strncpy_from_user(unsigned long __dest,
-	       unsigned long __user __src, int __count);
-
 #endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h
deleted file mode 100644
index 9bc07b9f30f..00000000000
--- a/arch/sh/include/asm/ucontext.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ucontext.h>
diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h
new file mode 100644
index 00000000000..6e38953ff7f
--- /dev/null
+++ b/arch/sh/include/asm/word-at-a-time.h
@@ -0,0 +1,53 @@
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+	/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+	long a = (0x0ff0001+mask) >> 23;
+	/* Fix the 1 for 00 case */
+	return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+#endif
+
+#endif
diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h
deleted file mode 100644
index c82eb12a5b1..00000000000
--- a/arch/sh/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
deleted file mode 100644
index 1192e1c761a..00000000000
--- a/arch/sh/include/cpu-sh2a/cpu/ubc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * SH-2A UBC definitions
- *
- * Copyright (C) 2008 Kieran Bingham
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_CPU_SH2A_UBC_H
-#define __ASM_CPU_SH2A_UBC_H
-
-#define UBC_BARA                0xfffc0400
-#define UBC_BAMRA               0xfffc0404
-#define UBC_BBRA                0xfffc04a0	/* 16 bit access */
-#define UBC_BDRA                0xfffc0408
-#define UBC_BDMRA               0xfffc040c
-
-#define UBC_BARB                0xfffc0410
-#define UBC_BAMRB               0xfffc0414
-#define UBC_BBRB                0xfffc04b0	/* 16 bit access */
-#define UBC_BDRB                0xfffc0418
-#define UBC_BDMRB               0xfffc041c
-
-#define UBC_BRCR                0xfffc04c0
-
-#endif /* __ASM_CPU_SH2A_UBC_H */
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index ff1f0e6e9be..b7cf6a547f1 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -1569,86 +1569,6 @@ ___clear_user_exit:
 #endif /* CONFIG_MMU */
 
 /*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- *			   int __count)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2)  -EFAULT (in case of faulting)
- *       copied data (otherwise)
- */
-	.global	__strncpy_from_user
-__strncpy_from_user:
-	pta	___strncpy_from_user1, tr0
-	pta	___strncpy_from_user_done, tr1
-	or	r4, ZERO, r5		/* r5 = original count */
-	beq/u	r4, r63, tr1		/* early exit if r4==0 */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
-	ld.b	r3, 0, r7		/* Fault address: only in reading */
-	st.b	r2, 0, r7
-	addi	r2, 1, r2
-	addi	r3, 1, r3
-	beq/u	ZERO, r7, tr1
-	addi	r4, -1, r4		/* return real number of copied bytes */
-	bne/l	ZERO, r4, tr0
-
-___strncpy_from_user_done:
-	sub	r5, r4, r6		/* If done, return copied */
-
-___strncpy_from_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2)  source address
- * (r3)  source size in bytes
- *
- * Ouputs:
- * (r2)  -EFAULT (in case of faulting)
- *       string length (otherwise)
- */
-	.global	__strnlen_user
-__strnlen_user:
-	pta	___strnlen_user_set_reply, tr0
-	pta	___strnlen_user1, tr1
-	or	ZERO, ZERO, r5		/* r5 = counter */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-	beq	r3, ZERO, tr0
-
-___strnlen_user1:
-	ldx.b	r2, r5, r7		/* Fault address: only in reading */
-	addi	r3, -1, r3		/* No real fixup */
-	addi	r5, 1, r5
-	beq	r3, ZERO, tr0
-	bne	r7, ZERO, tr1
-! The line below used to be active.  This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory.  Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-!	addi	r5, 1, r5		/* Include '\0' */
-
-___strnlen_user_set_reply:
-	or	r5, ZERO, r6		/* If done, return counter */
-
-___strnlen_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
  * extern long __get_user_asm_?(void *val, long addr)
  *
  * Inputs:
@@ -1982,8 +1902,6 @@ asm_uaccess_start:
 	.long	___copy_user2, ___copy_user_exit
 	.long	___clear_user1, ___clear_user_exit
 #endif
-	.long	___strncpy_from_user1, ___strncpy_from_user_exit
-	.long	___strnlen_user1, ___strnlen_user_exit
 	.long	___get_user_asm_b1, ___get_user_asm_b_exit
 	.long	___get_user_asm_w1, ___get_user_asm_w_exit
 	.long	___get_user_asm_l1, ___get_user_asm_l_exit
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 9b7a459a461..055d91b7030 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/export.h>
 #include <linux/stackprotector.h>
+#include <asm/fpu.h>
 
 struct kmem_cache *task_xstate_cachep = NULL;
 unsigned int xstate_size;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 4264583eaba..602545b12a8 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -33,6 +33,7 @@
 #include <asm/switch_to.h>
 
 struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
 
 void show_regs(struct pt_regs *regs)
 {
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index 45afa5c51f6..26a0774f527 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -32,8 +32,6 @@ EXPORT_SYMBOL(__get_user_asm_b);
 EXPORT_SYMBOL(__get_user_asm_w);
 EXPORT_SYMBOL(__get_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
deleted file mode 100644
index 870db592857..00000000000
--- a/arch/sparc/include/asm/cmt.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID		0x0000000000000010UL
-#define  LP_ID_MAX	0x00000000003f0000UL
-#define  LP_ID_ID	0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID	0x0000000000000000UL
-#define  LP_INTR_ID_ID	0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID		0x0000000000000040UL
-#define  CESR_ID_ID	0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL	0x0000000000000000UL
-#define  LP_AVAIL_1	0x0000000000000002UL
-#define  LP_AVAIL_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT	0x0000000000000010UL
-#define  LP_ENAB_STAT_1	0x0000000000000002UL
-#define  LP_ENAB_STAT_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB		0x0000000000000020UL
-#define  LP_ENAB_1	0x0000000000000002UL
-#define  LP_ENAB_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW	0x0000000000000050UL
-#define LP_RUNNING_W1S	0x0000000000000060UL
-#define LP_RUNNING_W1C	0x0000000000000068UL
-#define  LP_RUNNING_1	0x0000000000000002UL
-#define  LP_RUNNING_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT	0x0000000000000058UL
-#define  LP_RUN_STAT_1	0x0000000000000002UL
-#define  LP_RUN_STAT_0	0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER	0x0000000000000030UL
-#define  LP_XIR_STEER_1	0x0000000000000002UL
-#define  LP_XIR_STEER_0	0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER	0x0000000000000040UL
-#define  CMT_ER_STEER_1	0x0000000000000002UL
-#define  CMT_ER_STEER_0	0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
deleted file mode 100644
index f8423039b24..00000000000
--- a/arch/sparc/include/asm/mpmbox.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * mpmbox.h:  Interface and defines for the OpenProm mailbox
- *               facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram.  You probe the device tree prom nodes
- * for these values.  The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING     0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT          0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN        0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN      0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP     0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 5cffdc55f07..3e244f31e56 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -443,7 +443,7 @@ static int __init vio_init(void)
 	root_vdev = vio_create_one(hp, root, NULL);
 	err = -ENODEV;
 	if (!root_vdev) {
-		printk(KERN_ERR "VIO: Coult not create root device.\n");
+		printk(KERN_ERR "VIO: Could not create root device.\n");
 		goto out_release;
 	}
 
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
index c3dd275f25e..9ab078a4605 100644
--- a/arch/tile/include/asm/uaccess.h
+++ b/arch/tile/include/asm/uaccess.h
@@ -146,7 +146,7 @@ extern int fixup_exception(struct pt_regs *regs);
 #ifdef __tilegx__
 #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
 #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
 #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
 #else
 #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index be6d9e365a8..3470624d783 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec)
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 43876f16caf..cb00ccc7d57 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -47,16 +47,26 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte)
  * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
  * operations.
  *
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
  *
  * With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
  */
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
 static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
 {
 	pmdval_t ret;
@@ -74,12 +84,6 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
 
 	return (pmd_t) { ret };
 }
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
-	return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 086eb58c6e8..f1b42b3a186 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -120,11 +120,6 @@ bool kvm_check_and_clear_guest_paused(void)
 	bool ret = false;
 	struct pvclock_vcpu_time_info *src;
 
-	/*
-	 * per_cpu() is safe here because this function is only called from
-	 * timer functions where preemption is already disabled.
-	 */
-	WARN_ON(!in_atomic());
 	src = &__get_cpu_var(hv_clock);
 	if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
 		__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 62c9457ccd2..c0f420f76cd 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -100,7 +100,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 				 struct dma_attrs *attrs)
 {
 	unsigned long dma_mask;
-	struct page *page = NULL;
+	struct page *page;
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	dma_addr_t addr;
 
@@ -108,6 +108,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 
 	flag |= __GFP_ZERO;
 again:
+	page = NULL;
 	if (!(flag & GFP_ATOMIC))
 		page = dma_alloc_from_contiguous(dev, count, get_order(size));
 	if (!page)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3fab55bea29..7bd8a082365 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -349,9 +349,12 @@ static bool __cpuinit match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 
 static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 {
-	if (c->phys_proc_id == o->phys_proc_id)
-		return topology_sane(c, o, "mc");
+	if (c->phys_proc_id == o->phys_proc_id) {
+		if (cpu_has(c, X86_FEATURE_AMD_DCM))
+			return true;
 
+		return topology_sane(c, o, "mc");
+	}
 	return false;
 }
 
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index 677b1ed184c..4f74d94c8d9 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -22,7 +22,7 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 	void *map;
 	int ret;
 
-	if (__range_not_ok(from, n, TASK_SIZE) == 0)
+	if (__range_not_ok(from, n, TASK_SIZE))
 		return len;
 
 	do {
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index be1ef574ce9..78fe3f1ac49 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -180,7 +180,7 @@ err_free_memtype:
 
 /**
  * ioremap_nocache     -   map bus memory into CPU space
- * @offset:    bus address of the memory
+ * @phys_addr:    bus address of the memory
  * @size:      size of the resource to map
  *
  * ioremap_nocache performs a platform specific sequence of operations to
@@ -217,7 +217,7 @@ EXPORT_SYMBOL(ioremap_nocache);
 
 /**
  * ioremap_wc	-	map memory into CPU space write combined
- * @offset:	bus address of the memory
+ * @phys_addr:	bus address of the memory
  * @size:	size of the resource to map
  *
  * This version of ioremap ensures that the memory is marked write combining.
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e1ebde31521..a718e0d2350 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -122,7 +122,7 @@ within(unsigned long addr, unsigned long start, unsigned long end)
 
 /**
  * clflush_cache_range - flush a cache range with clflush
- * @addr:	virtual start address
+ * @vaddr:	virtual start address
  * @size:	number of bytes to flush
  *
  * clflush is an unordered instruction which needs fencing with mfence
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 3c6e328483c..028454f0c3a 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -110,19 +110,16 @@ static struct kmsg_dumper dw_dumper;
 static int dumper_registered;
 
 static void dw_kmsg_dump(struct kmsg_dumper *dumper,
-			enum kmsg_dump_reason reason,
-			const char *s1, unsigned long l1,
-			const char *s2, unsigned long l2)
+			 enum kmsg_dump_reason reason)
 {
-	int i;
+	static char line[1024];
+	size_t len;
 
 	/* When run to this, we'd better re-init the HW */
 	mrst_early_console_init();
 
-	for (i = 0; i < l1; i++)
-		early_mrst_console.write(&early_mrst_console, s1 + i, 1);
-	for (i = 0; i < l2; i++)
-		early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+	while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+		early_mrst_console.write(&early_mrst_console, line, len);
 }
 
 /* Set the ratio rate to 115200, 8n1, IRQ disabled */
diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c
index 416bd40c0eb..68d1dc91b37 100644
--- a/arch/x86/um/sys_call_table_32.c
+++ b/arch/x86/um/sys_call_table_32.c
@@ -39,9 +39,9 @@
 #undef __SYSCALL_I386
 #define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
 
-typedef void (*sys_call_ptr_t)(void);
+typedef asmlinkage void (*sys_call_ptr_t)(void);
 
-extern void sys_ni_syscall(void);
+extern asmlinkage void sys_ni_syscall(void);
 
 const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
 	/*
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e74df9548a0..ff962d4b821 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -209,6 +209,9 @@ static void __init xen_banner(void)
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
 
@@ -242,6 +245,11 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 		*dx = cpuid_leaf5_edx_val;
 		return;
 
+	case CPUID_THERM_POWER_LEAF:
+		/* Disabling APERFMPERF for kernel usage */
+		maskecx = ~(1 << APERFMPERF_PRESENT);
+		break;
+
 	case 0xb:
 		/* Suppress extended topology stuff */
 		maskebx = 0;
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index ffd08c414e9..64effdc6da9 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -706,6 +706,7 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	if (!PageHighMem(page)) {
@@ -741,6 +742,24 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	list_add(&page->lru,  &m2p_overrides[mfn_hash(mfn)]);
 	spin_unlock_irqrestore(&m2p_override_lock, flags);
 
+	/* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+	 * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+	 * pfn so that the following mfn_to_pfn(mfn) calls will return the
+	 * pfn from the m2p_override (the backend pfn) instead.
+	 * We need to do this because the pages shared by the frontend
+	 * (xen-blkfront) can be already locked (lock_page, called by
+	 * do_read_cache_page); when the userspace backend tries to use them
+	 * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+	 * do_blockdev_direct_IO is going to try to lock the same pages
+	 * again resulting in a deadlock.
+	 * As a side effect get_user_pages_fast might not be safe on the
+	 * frontend pages while they are being shared with the backend,
+	 * because mfn_to_pfn (that ends up being called by GUPF) will
+	 * return the backend pfn rather than the frontend pfn. */
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+		set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_add_override);
@@ -752,6 +771,7 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	mfn = get_phys_to_machine(pfn);
@@ -821,6 +841,22 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 	} else
 		set_phys_to_machine(pfn, page->index);
 
+	/* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+	 * somewhere in this domain, even before being added to the
+	 * m2p_override (see comment above in m2p_add_override).
+	 * If there are no other entries in the m2p_override corresponding
+	 * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+	 * the original pfn (the one shared by the frontend): the backend
+	 * cannot do any IO on this page anymore because it has been
+	 * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+	 * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+	 * pfn again. */
+	mfn &= ~FOREIGN_FRAME_BIT;
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+			m2p_find_override(mfn) == NULL)
+		set_phys_to_machine(pfn, mfn);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_remove_override);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 3ebba0753d3..a4790bf22c5 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -371,7 +371,8 @@ char * __init xen_memory_setup(void)
 	populated = xen_populate_chunk(map, memmap.nr_entries,
 			max_pfn, &last_pfn, xen_released_pages);
 
-	extra_pages += (xen_released_pages - populated);
+	xen_released_pages -= populated;
+	extra_pages += xen_released_pages;
 
 	if (last_pfn > max_pfn) {
 		max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 7608559de93..f973754ddf9 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -68,8 +68,8 @@ endif
 
 # Only build variant and/or platform if it includes a Makefile
 
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
 
 # Find libgcc.a
 
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 88ecea3facb..ee2e2089483 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -83,7 +83,6 @@ SECTIONS
 
   _text = .;
   _stext = .;
-  _ftext = .;
 
   .text :
   {
@@ -112,7 +111,7 @@ SECTIONS
   EXCEPTION_TABLE(16)
   /* Data section */
 
-  _fdata = .;
+  _sdata = .;
   RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
   _edata = .;
 
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index ba150e5de2e..db955179da2 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -26,11 +26,7 @@
 
 #include <asm/bootparam.h>
 #include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
 
 /*
  * mem_reserve(start, end, must_exist)
@@ -197,9 +193,9 @@ void __init mem_init(void)
 			reservedpages++;
 	}
 
-	codesize =  (unsigned long) &_etext - (unsigned long) &_ftext;
-	datasize =  (unsigned long) &_edata - (unsigned long) &_fdata;
-	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
+	codesize =  (unsigned long) _etext - (unsigned long) _stext;
+	datasize =  (unsigned long) _edata - (unsigned long) _sdata;
+	initsize =  (unsigned long) __init_end - (unsigned long) __init_begin;
 
 	printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
 	       "%ldk data, %ldk init %ldk highmem)\n",
@@ -237,7 +233,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 
 void free_initmem(void)
 {
-	free_reserved_mem(&__init_begin, &__init_end);
-	printk("Freeing unused kernel memory: %dk freed\n",
-	       (&__init_end - &__init_begin) >> 10);
+	free_reserved_mem(__init_begin, __init_end);
+	printk("Freeing unused kernel memory: %zuk freed\n",
+	       (__init_end - __init_begin) >> 10);
 }