Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King:
 "This contains the usual updates from other people (listed below) and
  the usual random muddle of miscellaneous ARM updates which cover some
  low priority bug fixes and performance improvements.

  I've started to put the pull request wording into the merge commits,
  which are:

   - NoMMU stuff:

     This includes the following series sent earlier to the list:
      - nommu-fixes
      - R7 Support
      - MPU support

     I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
     were discussing today until we've reached a conclusion/that's had
     some more review.

     This is rebased (and re-tested) on your devel-stable branch because
     otherwise there were going to be conflicts with Uwe's V7M work now
     that you've merged that.  I've included the fix for limiting MPU to
     CPU_V7.

   - Huge page support

     These changes bring both HugeTLB support and Transparent HugePage
     (THP) support to ARM.  Only long descriptors (LPAE) are supported
     in this series.

     The code has been tested on an Arndale board (Exynos 5250).

   - LPAE updates

     Please pull these miscellaneous LPAE fixes I've been collecting for
     a while now for 3.11.  They've been tested and reviewed by quite a
     few people, and most of the patches are pretty trivial.  -- Will Deacon.

   - arch_timer cleanups

     Please pull these arch_timer cleanups I've been holding onto for a
     while.  They're the same as my last posting, but have been rebased
     to v3.10-rc3.

   - mpidr linearisation (multiprocessor id register - identifies which
     CPU number we are in the system)

     This patch series that implements MPIDR linearization through a
     simple hashing algorithm and updates current cpu_{suspend}/{resume}
     code to use the newly created hash structures to retrieve context
     pointers.  It represents a stepping stone for the implementation of
     power management code on forthcoming multi-cluster ARM systems.

     It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
     OMAP4 and Tegra, with processors hitting low-power states requiring
     warm-boot resume through the cpu_resume code path"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
  ARM: 7777/1: Avoid extra calls to the C compiler
  ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
  ARM: 7770/1: remove residual ARMv2 support from decompressor
  ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
  ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
  ARM: 7767/1: let the ASID allocator handle suspended animation
  ARM: 7766/1: versatile: don't mark pen as __INIT
  ARM: 7765/1: perf: Record the user-mode PC in the call chain.
  ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
  ARM: kernel: implement stack pointer save array through MPIDR hashing
  ARM: kernel: build MPIDR hash function data structure
  ARM: mpu: Ensure that MPU depends on CPU_V7
  ARM: mpu: protect the vectors page with an MPU region
  ARM: mpu: Allow enabling of the MPU via kconfig
  ARM: 7758/1: introduce config HAS_BANDGAP
  ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
  ARM: 7751/1: zImage: don't overwrite ourself with a page table
  ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
  ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
  ...

83 files changed, 1846 insertions, 358 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index de7049bdea8..531cdda016f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -175,6 +175,9 @@ config ARCH_HAS_CPUFREQ
 	  and that the relevant menu configurations are displayed for
 	  it.
 
+config ARCH_HAS_BANDGAP
+	bool
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -1450,7 +1453,7 @@ config SMP
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
-	depends on MMU
+	depends on MMU || ARM_MPU
 	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
@@ -1471,7 +1474,7 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
-	depends on SMP && !XIP_KERNEL
+	depends on SMP && !XIP_KERNEL && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1744,6 +1747,14 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SYS_SUPPORTS_HUGETLBFS
+       def_bool y
+       depends on ARM_LPAE
+
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+       def_bool y
+       depends on ARM_LPAE
+
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index c859495da48..aed66d5df7f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -50,3 +50,15 @@ config REMAP_VECTORS_TO_RAM
 	  Otherwise, say 'y' here.  In this case, the kernel will require
 	  external support to redirect the hardware exception vectors to
 	  the writable versions located at DRAM_BASE.
+
+config ARM_MPU
+       bool 'Use the ARM v7 PMSA Compliant MPU'
+       depends on CPU_V7
+       default y
+       help
+         Some ARM systems without an MMU have instead a Memory Protection
+         Unit (MPU) that defines the type and permissions for regions of
+         memory.
+
+         If your CPU has an MPU then you should choose 'y' here unless you
+         know that you do not want to use the MPU.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 77c1411c9a9..5b7be8d975b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -550,6 +550,13 @@ choice
 		  of the tiles using the RS1 memory map, including all new A-class
 		  core tiles, FPGA-based SMMs and software models.
 
+	config DEBUG_VEXPRESS_UART0_CRX
+		bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
+		depends on ARCH_VEXPRESS && !MMU
+		help
+		  This option selects UART0 at 0xb0090000. This is appropriate for
+		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
+
 	config DEBUG_VT8500_UART0
 		bool "Use UART0 on VIA/Wondermedia SoCs"
 		depends on ARCH_VT8500
@@ -789,7 +796,8 @@ config DEBUG_LL_INCLUDE
 	default "debug/u300.S" if DEBUG_U300_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
-		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
+		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 || \
+		DEBUG_VEXPRESS_UART0_CRX
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 72caf82a828..c0ac0f5e5e5 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -59,38 +59,44 @@ comma = ,
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	:=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
 endif
-arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	:=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
+arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
+arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3
+
+# Evaluate arch cc-option calls now
+arch-y := $(arch-y)
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
+tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+
+# Evaluate tune cc-option calls now
+tune-y := $(tune-y)
 
 ifeq ($(CONFIG_AEABI),y)
 CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork
@@ -295,9 +301,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb: scripts
+%.dtb: | scripts
 	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
 
+PHONY += dtbs
 dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
 
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index aabc02a6848..d1153c8a765 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -53,6 +53,17 @@ static const void *getprop(const void *fdt, const char *node_path,
 	return fdt_getprop(fdt, offset, property, len);
 }
 
+static uint32_t get_cell_size(const void *fdt)
+{
+	int len;
+	uint32_t cell_size = 1;
+	const uint32_t *size_len =  getprop(fdt, "/", "#size-cells", &len);
+
+	if (size_len)
+		cell_size = fdt32_to_cpu(*size_len);
+	return cell_size;
+}
+
 static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
 {
 	char cmdline[COMMAND_LINE_SIZE];
@@ -95,9 +106,11 @@ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
 int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 {
 	struct tag *atag = atag_list;
-	uint32_t mem_reg_property[2 * NR_BANKS];
+	/* In the case of 64 bits memory size, need to reserve 2 cells for
+	 * address and size for each bank */
+	uint32_t mem_reg_property[2 * 2 * NR_BANKS];
 	int memcount = 0;
-	int ret;
+	int ret, memsize;
 
 	/* make sure we've got an aligned pointer */
 	if ((u32)atag_list & 0x3)
@@ -137,8 +150,25 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 				continue;
 			if (!atag->u.mem.size)
 				continue;
-			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
-			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+			memsize = get_cell_size(fdt);
+
+			if (memsize == 2) {
+				/* if memsize is 2, that means that
+				 * each data needs 2 cells of 32 bits,
+				 * so the data are 64 bits */
+				uint64_t *mem_reg_prop64 =
+					(uint64_t *)mem_reg_property;
+				mem_reg_prop64[memcount++] =
+					cpu_to_fdt64(atag->u.mem.start);
+				mem_reg_prop64[memcount++] =
+					cpu_to_fdt64(atag->u.mem.size);
+			} else {
+				mem_reg_property[memcount++] =
+					cpu_to_fdt32(atag->u.mem.start);
+				mem_reg_property[memcount++] =
+					cpu_to_fdt32(atag->u.mem.size);
+			}
+
 		} else if (atag->hdr.tag == ATAG_INITRD2) {
 			uint32_t initrd_start, initrd_size;
 			initrd_start = atag->u.initrd.start;
@@ -150,8 +180,10 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		}
 	}
 
-	if (memcount)
-		setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+	if (memcount) {
+		setprop(fdt, "/memory", "reg", mem_reg_property,
+			4 * memcount * memsize);
+	}
 
 	return fdt_pack(fdt);
 }
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 032a8d98714..75189f13cf5 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -142,7 +142,6 @@ start:
 		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
-#ifndef __ARM_ARCH_2__
 		/*
 		 * Booting from Angel - need to enter SVC mode and disable
 		 * FIQs/IRQs (numeric definitions from angel arm.h source).
@@ -158,10 +157,6 @@ not_angel:
 		safe_svcmode_maskall r0
 		msr	spsr_cxsf, r9		@ Save the CPU boot mode in
 						@ SPSR
-#else
-		teqp	pc, #0x0c000003		@ turn off interrupts
-#endif
-
 		/*
 		 * Note that some cache flushing and other stuff may
 		 * be needed here - is there an Angel SWI call for this?
@@ -183,7 +178,19 @@ not_angel:
 		ldr	r4, =zreladdr
 #endif
 
-		bl	cache_on
+		/*
+		 * Set up a page table only if it won't overwrite ourself.
+		 * That means r4 < pc && r4 - 16k page directory > &_end.
+		 * Given that r4 > &_end is most unfrequent, we add a rough
+		 * additional 1MB of room for a possible appended DTB.
+		 */
+		mov	r0, pc
+		cmp	r0, r4
+		ldrcc	r0, LC0+32
+		addcc	r0, r0, pc
+		cmpcc	r4, r0
+		orrcc	r4, r4, #1		@ remember we skipped cache_on
+		blcs	cache_on
 
 restart:	adr	r0, LC0
 		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
@@ -229,7 +236,7 @@ restart:	adr	r0, LC0
  *   r0  = delta
  *   r2  = BSS start
  *   r3  = BSS end
- *   r4  = final kernel address
+ *   r4  = final kernel address (possibly with LSB set)
  *   r5  = appended dtb size (still unknown)
  *   r6  = _edata
  *   r7  = architecture ID
@@ -277,6 +284,7 @@ restart:	adr	r0, LC0
 		 */
 		cmp	r0, #1
 		sub	r0, r4, #TEXT_OFFSET
+		bic	r0, r0, #1
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
@@ -323,12 +331,13 @@ dtb_check_done:
 
 /*
  * Check to see if we will overwrite ourselves.
- *   r4  = final kernel address
+ *   r4  = final kernel address (possibly with LSB set)
  *   r9  = size of decompressed image<