Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...

100 files changed, 250 insertions, 5881 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a39e3214ea3..006f9838dd4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2163,7 +2163,6 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_IMX
@@ -2173,30 +2172,6 @@ config CPU_FREQ_IMX
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-	select CPU_FREQ_TABLE
-
 config CPU_FREQ_S3C
 	bool
 	help
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 13482ea58b0..93f3794ba5c 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -56,7 +56,6 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_KIRKWOOD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 0c6381516a5..48f1228c611 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -27,8 +27,6 @@
 
 #define AT91_MAX_STATES	2
 
-static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
-
 /* Actual code that puts the SoC in different idle states */
 static int at91_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
@@ -47,7 +45,6 @@ static int at91_enter_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver at91_idle_driver = {
 	.name			= "at91_idle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
 	.states[1]		= {
 		.enter			= at91_enter_idle,
@@ -61,20 +58,9 @@ static struct cpuidle_driver at91_idle_driver = {
 };
 
 /* Initialize CPU idle by registering the idle states */
-static int at91_init_cpuidle(void)
+static int __init at91_init_cpuidle(void)
 {
-	struct cpuidle_device *device;
-
-	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
-	device->state_count = AT91_MAX_STATES;
-
-	cpuidle_register_driver(&at91_idle_driver);
-
-	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
-		return -EIO;
-	}
-	return 0;
+	return cpuidle_register(&at91_idle_driver, NULL);
 }
 
 device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index fb5c1aa98a6..dd1ffccc75e 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
deleted file mode 100644
index 4729eaab0f4..00000000000
--- a/arch/arm/mach-davinci/cpufreq.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * CPU frequency scaling for DaVinci
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
- *
- *  Copyright (C) 2005 Nokia Corporation
- *  Written by Tony Lindgren <tony@atomide.com>
- *
- *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Updated to support OMAP3
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/cpufreq.h>
-#include <mach/common.h>
-
-#include "clock.h"
-
-struct davinci_cpufreq {
-	struct device *dev;
-	struct clk *armclk;
-	struct clk *asyncclk;
-	unsigned long asyncrate;
-};
-static struct davinci_cpufreq cpufreq;
-
-static int davinci_verify_speed(struct cpufreq_policy *policy)
-{
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-	struct clk *armclk = cpufreq.armclk;
-
-	if (freq_table)
-		return cpufreq_frequency_table_verify(policy, freq_table);
-
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
-	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-						policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static unsigned int davinci_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpufreq.armclk) / 1000;
-}
-
-static int davinci_target(struct cpufreq_policy *policy,
-				unsigned int target_freq, unsigned int relation)
-{
-	int ret = 0;
-	unsigned int idx;
-	struct cpufreq_freqs freqs;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct clk *armclk = cpufreq.armclk;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	freqs.old = davinci_getspeed(0);
-	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
-	freqs.cpu = 0;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
-						freqs.new, relation, &idx);
-	if (ret)
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
-		ret = pdata->set_voltage(idx);
-		if (ret)
-			goto out;
-	}
-
-	ret = clk_set_rate(armclk, idx);
-	if (ret)
-		goto out;
-
-	if (cpufreq.asyncclk) {
-		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
-		if (ret)
-			goto out;
-	}
-
-	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_vol