Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (140 commits)
  MAINTAINERS: de-orphan fbdev.
  MAINTAINERS: Add file pattern for fb dt bindings.
  video: Move sm501fb devicetree binding documentation to a better place.
  fbcon: fix situation where fbcon gets deinitialised and can't reinit.
  video, sm501: add OF binding to support SM501
  video, sm501: add edid and commandline support
  video, sm501: add I/O functions for use on powerpc
  video: Fix EDID macros H_SYNC_WIDTH and H_SYNC_OFFSET
  fbcon: Bugfix soft cursor detection in Tile Blitting
  video: add missing framebuffer_release in error path
  video: metronomefb: add __devexit_p around reference to metronomefb_remove
  video: hecubafb: add __devexit_p around reference to hecubafb_remove
  drivers:video:aty:radeon_base Fix typo occationally to occasionally
  atmel_lcdfb: add fb_blank function
  atmel_lcdfb: implement inverted contrast pwm
  video: s3c-fb: return proper error if clk_get fails
  uvesafb,vesafb: create WC or WB PAT-entries
  video: ffb: fix ffb_probe error path
  radeonfb: Let hwmon driver probe the "monid" I2C bus
  fbdev: sh_mobile_lcdc: checking NULL instead of IS_ERR()
  ...

23 files changed, 801 insertions, 116 deletions

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 019fb7c67dc..076db52ff67 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -193,6 +193,17 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_OMAP_LCD_VGA=y
+CONFIG_OMAP2_DSS=m
+CONFIG_OMAP2_DSS_RFBI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP2=m
+CONFIG_PANEL_GENERIC_DPI=m
+CONFIG_PANEL_SHARP_LS037V7DW01=m
+CONFIG_PANEL_NEC_NL8048HL11_01B=m
+CONFIG_PANEL_TAAL=m
+CONFIG_PANEL_TPO_TD043MTEA1=m
+CONFIG_PANEL_ACX565AKM=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index c06eb423c4e..9afd087cc29 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -307,9 +307,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 	.default_device	= &sdp3430_lcd_device,
 };
 
-static struct regulator_consumer_supply sdp3430_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
-
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 };
 
@@ -398,12 +395,13 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
 };
 
 static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
 };
 
 /* VPLL2 for digital video outputs */
 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 333ceb2c8fb..62c78de1aa5 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -36,6 +36,7 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
+#include <plat/display.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -47,6 +48,8 @@
 #define ETH_KS8851_QUART		138
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
+#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 
 static const int sdp4430_keymap[] = {
 	KEY(0, 0, KEY_E),
@@ -621,6 +624,76 @@ static void __init omap_sfh7741prox_init(void)
 	}
 }
 
+static void sdp4430_hdmi_mux_init(void)
+{
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+}
+
+static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
+{
+	int status;
+
+	status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_hpd");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
+		return status;
+	}
+	status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_ls_oe");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
+		goto error1;
+	}
+
+	return 0;
+
+error1:
+	gpio_free(HDMI_GPIO_HPD);
+
+	return status;
+}
+
+static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
+{
+	gpio_free(HDMI_GPIO_LS_OE);
+	gpio_free(HDMI_GPIO_HPD);
+}
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.platform_enable = sdp4430_panel_enable_hdmi,
+	.platform_disable = sdp4430_panel_disable_hdmi,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+};
+
+static struct omap_dss_device *sdp4430_dss_devices[] = {
+	&sdp4430_hdmi_device,
+};
+
+static struct omap_dss_board_info sdp4430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
+	.devices	= sdp4430_dss_devices,
+	.default_device	= &sdp4430_hdmi_device,
+};
+
+void omap_4430sdp_display_init(void)
+{
+	sdp4430_hdmi_mux_init();
+	omap_display_init(&sdp4430_dss_data);
+}
+
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -729,6 +802,8 @@ static void __init omap_4430sdp_init(void)
 	status = omap4_keyboard_init(&sdp4430_keypad_data);
 	if (status)
 		pr_err("Keypad initialization failed: %d\n", status);
+
+	omap_4430sdp_display_init();
 }
 
 static void __init omap_4430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 7b5647954c1..02a12b41c0f 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -488,7 +488,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
 };
 
 static struct regulator_consumer_supply cm_t35_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static struct regulator_consumer_supply cm_t35_vdvi_supply =
 	REGULATOR_SUPPLY("vdvi", "omapdss");
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index aa27483c493..65f9fde2c56 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -196,7 +196,7 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 };
 
 static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -277,8 +277,10 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll1_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -319,8 +321,8 @@ static struct regulator_init_data devkit8000_vpll1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vpll1_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll1_supplies),
+	.consumer_supplies	= devkit8000_vpll1_supplies,
 };
 
 /* VAUX4 for ads7846 and nubs */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d3199b4ecdb..5f8a2fd0633 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -485,8 +485,10 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
 
-static struct regulator_consumer_supply igep2_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_init_data igep2_vpll2 = {
 	.constraints = {
@@ -499,8 +501,8 @@ static struct regulator_init_data igep2_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &igep2_vpll2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(igep2_vpll2_supplies),
+	.consumer_supplies	= igep2_vpll2_supplies,
 };
 
 static void __init igep2_display_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7640c054f43..33007fd4a08 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -232,10 +232,12 @@ static struct omap_dss_board_info beagle_dss_data = {
 };
 
 static struct regulator_consumer_supply beagle_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
-static struct regulator_consumer_supply beagle_vdvi_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static void __init beagle_display_init(void)
 {
@@ -422,8 +424,8 @@ static struct regulator_init_data beagle_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdvi_supplies),
+	.consumer_supplies	= beagle_vdvi_supplies,
 };
 
 static struct twl4030_usb_data beagle_usb_data = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0fa2c7b208b..5a1a916e5cc 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -542,7 +542,7 @@ static struct twl4030_codec_data omap3evm_codec_data = {
 };
 
 static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_evm_vdac = {
@@ -560,8 +560,10 @@ static struct regulator_init_data omap3_evm_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_init_data omap3_evm_vpll2 = {
 	.constraints = {
@@ -573,8 +575,8 @@ static struct regulator_init_data omap3_evm_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_evm_vpll2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vpll2_supplies),
+	.consumer_supplies	= omap3_evm_vpll2_supplies,
 };
 
 /* ads7846 on SPI */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2e5dc21e347..07dba888f45 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -342,11 +342,12 @@ static struct regulator_consumer_supply pandora_vmmc3_supply =
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
 
 static struct regulator_consumer_supply pandora_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
 
 static struct regulator_consumer_supply pandora_vcc_lcd_supply =
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8ebdbc38b9d..a6e0b9161c9 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -439,7 +439,7 @@ static struct twl4030_codec_data omap3stalker_codec_data = {
 };
 
 static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 /* VDAC for DSS driving S-Video */
 static struct regulator_init_data omap3_stalker_vdac = {
@@ -457,8 +457,10 @@ static struct regulator_init_data omap3_stalker_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_init_data omap3_stalker_vpll2 = {
 	.constraints		= {
@@ -471,8 +473,8 @@ static struct regulator_init_data omap3_stalker_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 		| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_stalker_vpll2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vpll2_supplies),
+	.consumer_supplies	= omap3_stalker_vpll2_supplies,
 };
 
 static struct twl4030_platform_data omap3stalker_twldata = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 0f4d8a762a7..209cffbee4e 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -34,11 +34,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <plat/display.h>
 
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+#include <plat/panel-generic-dpi.h>
 #include "timer-gp.h"
 
 #include "hsmmc.h"
@@ -49,6 +51,8 @@
 #define GPIO_HUB_NRESET		62
 #define GPIO_WIFI_PMENA		43
 #define GPIO_WIFI_IRQ		53
+#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 
 /* wl127x BT, FM, GPS connectivity chip */
 static int wl1271_gpios[] = {46, -1, -1};
@@ -433,6 +437,17 @@ static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
 		.platform_data = &omap4_panda_twldata,
 	},
 };
+
+/*
+ * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
+ * is connected as I2C slave device, and can be accessed at address 0x50
+ */
+static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
 static int __init omap4_panda_i2c_init(void)
 {
 	/*
@@ -442,7 +457,12 @@ static int __init omap4_panda_i2c_init(void)
 	omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
 			ARRAY_SIZE(omap4_panda_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/*
+	 * Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz
+	 */
+	omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
+					ARRAY_SIZE(panda_i2c_eeprom));
 	omap_register_i2c_bus(4, 400, NULL, 0);
 	return 0;
 }
@@ -462,6 +482,64 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
 	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* gpio 0 - TFP410 PD */
+	OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
+	/* dispc2_data23 */
+	OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data22 */
+	OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data21 */
+	OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data20 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data19 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data18 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data15 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data14 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data13 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data12 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data11 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data10 */
+	OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data9 */
+	OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data16 */
+	OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data17 */
+	OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_hsync */
+	OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_pclk */
+	OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_vsync */
+	OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_de */
+	OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data8 */
+	OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data7 */
+	OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data6 */
+	OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data5 */
+	OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data4 */
+	OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data3 */
+	OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data2 */
+	OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data1 */
+	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data0 */
+	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
@@ -535,6 +613,128 @@ static inline void board_serial_init(void)
 }
 #endif
 
+/* Display DVI */
+#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
+
+static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+/* Using generic display panel */
+static struct panel_generic_dpi_data omap4_dvi_panel = {
+	.name			= "generic",
+	.platform_enable	= omap4_panda_enable_dvi,
+	.platform_disable	= omap4_panda_disable_dvi,
+};
+
+struct omap_dss_device omap4_panda_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &omap4_dvi_panel,
+	.phy.dpi.data_lines	= 24,
+	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+int __init omap4_panda_dvi_init(void)
+{
+	int r;
+
+	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
+	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
+				GPIOF_OUT_INIT_LOW, "DVI PD");
+	if (r)
+		pr_err("Failed to get DVI powerdown GPIO\n");
+
+	return r;
+}
+
+
+static void omap4_panda_hdmi_mux_init(void)
+{
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+}
+
+static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
+{
+	int status;
+
+	status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_hpd");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
+		return status;
+	}
+	status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
+							"hdmi_gpio_ls_oe");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
+		goto error1;
+	}
+
+	return 0;
+
+error1:
+	gpio_free(HDMI_GPIO_HPD);
+
+	return status;
+}
+
+static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
+{
+	gpio_free(HDMI_GPIO_LS_OE);
+	gpio_free(HDMI_GPIO_HPD);
+}
+
+static struct omap_dss_device  omap4_panda_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.platform_enable = omap4_panda_panel_enable_hdmi,
+	.platform_disable = omap4_panda_panel_disable_hdmi,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+};
+
+static struct omap_dss_device *omap4_panda_dss_devices[] = {
+	&omap4_panda_dvi_device,
+	&omap4_panda_hdmi_device,
+};
+
+static struct omap_dss_board_info omap4_panda_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
+	.devices	= omap4_panda_dss_devices,
+	.default_device	= &omap4_panda_dvi_device,
+};
+
+void omap4_panda_display_init(void)
+{
+	int r;
+
+	r = omap4_panda_dvi_init();
+	if (r)
+		pr_err("error initializing panda DVI\n");
+
+	omap4_panda_hdmi_mux_init();
+	omap_display_init(&omap4_panda_dss_data);
+}
+
 static void __init omap4_panda_init(void)
 {
 	int package = OMAP_PACKAGE_CBS;
@@ -553,6 +753,7 @@ static void __init omap4_panda_init(void)
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
+	omap4_panda_display_init();
 }
 
 static void __init omap4_panda_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index d0961945c65..59ca33326b8 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -28,6 +28,8 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -41,10 +43,14 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 #include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include "mux.h"
@@ -68,8 +74,6 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <plat/mcspi.h>
-#include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
@@ -94,16 +98,32 @@ static struct ads7846_platform_data ads7846_config = {
 	.keep_vref_on		= 1,
 };
 
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &ads7846_mcspi_config,
-		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
-		.platform_data		= &ads7846_config,
-	}
+/* fixed regulator for ads7846 */
+static struct regulator_consumer_supply ads7846_supply =
+	REGULATOR_SUPPLY("vcc", "spi1.0");
+
+static struct regulator_init_data vads7846_regulator = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+	.supply_name		= "vads7846",
+	.microvolts		= 3300000, /* 3.3V */
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.init_data		= &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &vads7846,
+	},
 };
 
 static void __init overo_ads7846_init(void)
@@ -116,8 +136,7 @@ static void __init overo_ads7846_init(void)
 		return;
 	}
 
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
+	platform_device_register(&vads7846_device);
 }
 
 #else
@@ -233,6 +252,137 @@ static inline void __init overo_init_smsc911x(void)
 static inline void __init overo_init_smsc911x(void) { return; }
 #endif
 
+/* DSS */
+static int lcd_enabled;
+static int dvi_enabled;
+
+#define OVERO_GPIO_LCD_EN 144
+#define OVERO_GPIO_LCD_BL 145
+
+static void __init overo_display_init(void)
+{
+	if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
+		gpio_export(OVERO_GPIO_LCD_EN, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_LCD_EN\n");
+
+	if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
+	    (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
+		gpio_export(OVERO_GPIO_LCD_BL, 0);
+	else
+		printk(KERN_ERR "could not obtain gpio for "
+					"OVERO_GPIO_LCD_BL\n");
+}
+
+static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+	.name			= "generic",
+	.platform_enable	= overo_panel_enable_dvi,
+	.platform_disable	= overo_panel_disable_dvi,
+};
+
+static struct omap_dss_device overo_dvi_device = {
+	.name			= "dvi",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+static struct omap_dss_device overo_tv_device = {
+	.name = "tv",
+	.driver_name = "venc",
+	.type = OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
+	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
+	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
+	lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd43_panel = {
+	.name			= "samsung_lte430wq_f0c",
+	.platform_enable	= overo_panel_enable_lcd,
+	.platform_disable	= overo_panel_disable_lcd,
+};
+
+static struct omap_dss_device overo_lcd43_device = {
+	.name			= "lcd43",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd43_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct omap_dss_device overo_lcd35_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd35",
+	.driver_name		= "lgphilips_lb035q02_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= overo_panel_enable_lcd,
+	.platform_disable	= overo_panel_disable_lcd,
+};
+#endif
+
+static struct omap_dss_device *overo_dss_devices[] = {
+	&overo_dvi_device,
+	&overo_tv_device,
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+	&overo_lcd35_device,
+#endif
+	&overo_lcd43_device,
+};
+
+static struct omap_dss_board_info overo_dss_data = {
+	.num_devices	= ARRAY_SIZE(overo_dss_devices),
+	.devices	= overo_dss_devices,
+	.default_device	= &overo_dvi_device,
+};
+
+static struct regulator_consumer_supply overo_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+
+static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -323,6 +473,93 @@ static struct regulator_consumer_supply overo_vmmc1_supply = {
 	.supply			= "vmmc",
 };
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "overo:red:gpio21",
+		.default_trigger	= "heartbeat",
+		.gpio			= 21,
+		.active_low		= true,
+	},
+	{
+		.name			= "overo:blue:gpio22",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= true,
+	},
+	{
+		.name			= "overo:blue:COM",
+		.default_trigger	= "mmc0",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_leds_pdata = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_leds_pdata,
+	},
+};
+
+static void __init overo_init_led(void)
+{
+	platform_device_register(&gpio_leds_device);
+}
+
+#else
+static inline void __init overo_init_led(void) { return; }
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_0,
+		.gpio			= 23,
+		.desc			= "button0",
+		.wakeup			= 1,
+	},
+	{
+		.code			= BTN_1,
+		.gpio			= 14,
+		.desc			= "button1",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_keys_pdata = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_keys_pdata,
+	},
+};
+
+static void __init overo_init_keys(void)
+{
+	platform_device_register(&gpio_keys_device);
+}
+
+#else
+static inline void __init overo_init_keys(void) { return; }
+#endif
+
 static int overo_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -330,6 +567,11 @@ static int overo_twl_gpio_setup(struct device *dev,
 
 	overo_vmmc1_supply.dev = mmc[0].dev;
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
 	return 0;
 }
 
@@ -337,6 +579,7 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
 
@@ -358,6 +601,35 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data overo_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &overo_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data overo_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(overo_vdds_dsi_supply),
+	.consumer_supplies	= overo_vdds_dsi_supply,
+};
+
 static struct twl4030_codec_audio_data overo_audio_data;
 
 static struct twl4030_codec_data overo_codec_data = {
@@ -365,8 +637,6 @@ static struct twl4030_codec_data overo_codec_data = {
 	.audio = &overo_audio_data,
 };
 
-/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
-
 static struct twl4030_platform_data overo_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -374,6 +644,8 @@ static struct twl4030_platform_data overo_twldata = {
 	.usb		= &overo_usb_data,
 	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
+	.vdac		= &overo_vdac,
+	.vpll2		= &overo_vpll2,
 };
 
 static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
@@ -394,18 +666,38 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static struct platform_device overo_lcd_device = {
-	.name		= "overo_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config overo_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct spi_board_info overo_spi_board_info[] __initdata = {
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	},
+#endif
+#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
+	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+	{
+		.modalias		= "lgphilips_lb035q02_panel-spi",
+		.bus_num		= 1,
+		.chip_select		= 1,
+		.max_speed_hz		= 500000,
+		.mode			= SPI_MODE_3,
+	},
+#endif
 };
 
-static struct omap_board_config_kernel overo_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&overo_lcd_config },
-};
+static int __init overo_spi_init(void)
+{
+	overo_ads7846_init();
+	spi_register_board_info(overo_spi_board_info,
+			ARRAY_SIZE(overo_spi_board_info));
+	return 0;
+}
 
 static void __init overo_init_early(void)
 {
@@ -414,15 +706,10 @@ static void __init overo_init_early(void)
 				  mt46h32m32lf6_sdrc_params);
 }
 
-static struct platform_device *overo_devices[] __initdata = {
-	&overo_lcd_device,
-};
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
@@ -444,16 +731,18 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init overo_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	overo_i2c_init();
-	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
+	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
+	overo_spi_init();
 	overo_ads7846_init();
 	overo_init_smsc911x();
+	overo_display_init();
+	overo_init_led();
+	overo_init_keys();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 5f1900c532e..bbcb6775a6a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -372,7 +372,7 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 };
 
 static struct regulator_consumer_supply rx51_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
 };
 
 static struct regulator_init_data rx51_vaux1 = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 448ab60195d..8dee7549fbd 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -226,11 +226,13 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
 
-static struct regulator_consumer_supply zoom_vpll2_supply =
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
 
 static struct regulator_consumer_supply zoom_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 
 static struct regulator_init_data zoom_vpll2 = {
 	.constraints = {
@@ -241,8 +243,8 @@ static struct regulator_init_data zoom_vpll2 = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies		= 1,
-	.consumer_supplies		= &zoom_vpll2_supply,
+	.num_consumer_supplies		= ARRAY_SIZE(zoom_vpll2_supplies),
+	.consumer_supplies		= zoom_vpll2_supplies,
 };
 
 static struct regulator_init_data zoom_vdac = {
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index b6f65d4ac97..2926d028b6e 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1804,10 +1804,10 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_242X),
 	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
 	/* DSS domain clocks */
-	CLK("omapdss",	"ick",		&dss_ick,	CK_242X),
-	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_242X),
-	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_242X),
-	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_242X),
+	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
+	CLK("omapdss_dss",	"fck",		&dss1_fck,	CK_242X),
+	CLK("omapdss_dss",	"sys_clk",	&dss2_fck,	CK_242X),
+	CLK("omapdss_dss",	"tv_clk",	&dss_54m_fck,	CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_242X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index bba018331a7..0c79d39e302 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1894,10 +1894,10 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK("omapdss",	"ick",		&dss_ick,	CK_243X),
-	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X),
-	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X),
-	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X),
+	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
+	CLK("omapdss_dss",	"fck",		&dss1_fck,	CK_243X),
+	CLK("omapdss_dss",	"sys_clk",	&dss2_fck,	CK_243X),
+	CLK("omapdss_dss",	"tv_clk",	&dss_54m_fck,	CK_243X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index fcb321a64f1..75b119bd9cd 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3356,13 +3356,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_34XX | CK_36XX),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_3XXX),
-	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_3XXX),
-	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_3XXX),
-	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("omapdss_dss",	"fck",		&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapdss_dss",	"fck",		&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("omapdss_dss",	"tv_clk",	&dss_tv_fck,	CK_3XXX),
+	CLK("omapdss_dss",	"video_clk",	&dss_96m_fck,	CK_3XXX),
+	CLK("omapdss_dss",	"sys_clk",	&dss2_alwon_fck, CK_3XXX),
+	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d32ed979a8d..276992d3b7f 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3114,11 +3114,16 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
 	CLK(NULL,	"dmic_fck",			&dmic_fck,	CK_443X),
 	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
-	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk,	CK_443X),
-	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
-	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
-	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
+	CLK("omapdss_dss",	"sys_clk",			&dss_sys_clk,	CK_443X),
+	CLK("omapdss_dss",	"tv_clk",			&dss_tv_clk,	CK_443X),
+	CLK("omapdss_dss",	"dss_clk",			&dss_dss_clk,	CK_443X),
+	CLK("omapdss_dss",	"video_clk",			&dss_48mhz_clk,	CK_443X),
+	CLK("omapdss_dss",	"fck",				&dss_fck,	CK_443X),
+	/*
+	 * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
+	 * with OMAP2/3.
+	 */
+	CLK("omapdss_dss",	"ick",				&dummy_ck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index b18db84b034..256d23fb79a 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -23,6 +23,8 @@
 #include <linux/err.h>
 
 #include <plat/display.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
@@ -32,9 +34,87 @@ static struct platform_device omap_display_device = {
 	},
 };
 
+static struct omap_device_pm_latency omap_dss_latency[] = {
+	[0] = {
+		.deactivate_func        = omap_device_idle_hwmods,
+		.activate_func          = omap_device_enable_hwmods,
+		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+/* oh_core is used for getting opt-clocks */
+static struct omap_hwmod	*oh_core;
+
+static bool opt_clock_available(const char *clk_role)
+{
+	int i;
+
+	for (i = 0; i < oh_core->opt_clks_cnt; i++) {
+		if (!strcmp(oh_core->opt_clks[i].role, clk_role))
+			return true;
+	}
+	return false;
+}
+
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	int i;
+	struct omap_display_platform_data pdata;
+
+	/*
+	 * omap: valid DSS hwmod names
+	 * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc
+	 * omap3,4: dss_dsi1
+	 * omap4: dss_dsi2, dss_hdmi
+	 */
+	char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc",
+		"dss_dsi1", "dss_dsi2", "dss_hdmi" };
+	char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi",
+		"omapdss_venc", "omapdss_dsi1", "omapdss_dsi2",
+		"omapdss_hdmi" };
+	int oh_count;
+
+	memset(&pdata, 0, sizeof(pdata));
+
+	if (cpu_is_omap24xx())
+		oh_count = ARRAY_SIZE(oh_name) - 3;
+		/* last 3 hwmod dev in oh_name are not available for omap2 */
+	else if (cpu_is_omap44xx())
+		oh_count = ARRAY_SIZE(oh_name);
+	else
+		oh_count = ARRAY_SIZE(oh_name) - 2;
+		/* last 2 hwmod dev in oh_name are not available for omap3 */
+
+	/* opt_clks are always associated with dss hwmod */
+	oh_core = omap_hwmod_lookup("dss_core");
+	if (!oh_core) {
+		pr_err("Could not look up dss_core.\n");
+		return -ENODEV;
+	}
+
+	pdata.board_data = board_data;
+	pdata.board_data->get_last_off_on_transaction_id = NULL;
+	pdata.opt_clock_available = opt_clock_available;
+
+	for (i = 0; i < oh_count; i++) {
+		oh = omap_hwmod_lookup(oh_name[i]);
+		if (!oh) {
+			pr_err("Could not look up %s\n", oh_name[i]);
+			return -ENODEV;
+		}
+
+		od = omap_device_build(dev_name[i], -1, oh, &pdata,
+				sizeof(struct omap_display_platform_data),
+				omap_dss_latency,
+				ARRAY_SIZE(omap_dss_latency), 0);
+
+		if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+				oh_name[i]))
+			return -ENODEV;
+	}
 	omap_display_device.dev.platform_data = board_data;
 
 	r = platform_device_register(&omap_display_device);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 62823467163..8eb3ce1bbfb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1168,11 +1168,6 @@ static struct omap_hwmod_class omap2420_dss_hwmod_class = {
 	.sysc = &omap2420_dss_sysc,
 };
 
-/* dss */
-static struct omap_hwmod_irq_info omap2420_dss_irqs[] = {
-	{ .irq = 25 },
-};
-
 static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 };
@@ -1221,8 +1216,6 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap2420_dss_hwmod_class,
 	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap2420_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap2420_dss_irqs),
 	.sdma_reqs	= omap2420_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap2420_dss_sdma_chs),
 	.prcm		= {
@@ -1265,6 +1258,10 @@ static struct omap_hwmod_class omap2420_dispc_hwmod_class = {
 	.sysc = &omap2420_dispc_sysc,
 };
 
+static struct omap_hwmod_irq_info omap2420_dispc_irqs[] = {
+	{ .irq = 25 },
+};
+
 static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = {
 	{
 		.pa_start	= 0x48050400,
@@ -1297,6 +1294,8 @@ static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
 static struct omap_hwmod omap2420_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap2420_dispc_hwmod_class,
+	.mpu_irqs	= omap2420_dispc_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2420_dispc_irqs),
 	.main_clk	= "dss1_fck",
 	.prcm		= {
 		.omap2 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 0fdf2cabfb1..a860fb5024c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1268,10 +1268,6 @@ static struct omap_hwmod_class omap2430_dss_hwmod_class = {
 	.sysc = &omap2430_dss_sysc,
 };
 
-/* dss */
-static struct omap_hwmod_irq_info omap2430_dss_irqs[] = {
-	{ .irq = 25 },
-};
 static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 };
@@ -1314,8 +1310,6 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap2430_dss_hwmod_class,
 	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap2430_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dss_irqs),
 	.sdma_reqs	= omap2430_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap2430_dss_sdma_chs),
 	.prcm		= {
@@ -1358,6 +1352,10 @@ static struct omap_hwmod_class omap2430_dispc_hwmod_class = {
 	.sysc = &omap2430_dispc_sysc,
 };
 
+static struct omap_hwmod_irq_info omap2430_dispc_irqs[] = {
+	{ .irq = 25 },
+};
+
 static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = {
 	{
 		.pa_start	= 0x48050400,
@@ -1384,6 +1382,8 @@ static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = {
 static struct omap_hwmod omap2430_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap2430_dispc_hwmod_class,
+	.mpu_irqs	= omap2430_dispc_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dispc_irqs),
 	.main_clk	= "dss1_fck",
 	.prcm		= {
 		.omap2 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c819c306693..b98e2dfcba2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1480,11 +1480,6 @@ static struct omap_hwmod_class omap3xxx_dss_hwmod_class = {
 	.sysc = &omap3xxx_dss_sysc,
 };
 
-/* dss */
-static struct omap_hwmod_irq_info omap3xxx_dss_irqs[] = {
-	{ .irq = 25 },
-};
-
 static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
 	{ .name = "dispc", .dma_req = 5 },
 	{ .name = "dsi1", .dma_req = 74 },
@@ -1548,7 +1543,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
 
 static struct omap_hwmod_opt_clk dss_opt_clks[] = {
 	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	{ .role = "dssclk", .clk = "dss_96m_fck" },
+	{ .role = "video_clk", .clk = "dss_96m_fck" },
 	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
 };
 
@@ -1556,8 +1551,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap3xxx_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap3xxx_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dss_irqs),
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap3xxx_dss_sdma_chs),
 
@@ -1584,8 +1577,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
 	.name		= "dss_core",
 	.class		= &omap3xxx_dss_hwmod_class,
 	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
-	.mpu_irqs	= omap3xxx_dss_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dss_irqs),
 	.sdma_reqs	= omap3xxx_dss_sdma_chs,
 	.sdma_reqs_cnt	= ARRAY_SIZE(omap3xxx_dss_sdma_chs),
 
@@ -1631,6 +1622,10 @@ static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = {
 	.sysc = &omap3xxx_dispc_sysc,
 };
 
+static struct omap_hwmod_irq_info omap3xxx_dispc_irqs[] = {
+	{ .irq = 25 },
+};
+
 static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = {
 	{
 		.pa_start	= 0x48050400,
@@ -1664,6 +1659,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
 static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
 	.name		= "dss_dispc",
 	.class		= &omap3xxx_dispc_hwmod_class,
+	.mpu_irqs	= omap3xxx_dispc_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dispc_irqs),
 	.main_clk	= "dss1_alwon_fck",
 	.prcm		= {
 		.omap2 = {
@@ -1689,6 +1686,10 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
 };
 
+static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
+	{ .irq = 25 },
+};
+
 /* dss_dsi1 */
 static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
 	{
@@ -1722,6 +1723,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
 static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
 	.name		= "dss_dsi1",
 	.class		= &omap3xxx_dsi_hwmod_class,
+	.mpu_irqs	= omap3xxx_dsi1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dsi1_irqs),
 	.main_clk	= "dss1_alwon_fck",
 	.prcm		= {
 		.omap2 = {
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index 0f140ecedb0..5e04ddc18fa 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -58,6 +58,7 @@ enum omap_display_type {
 	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
 	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
 	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
+	OMAP_DISPLAY_TYPE_HDMI		= 1 << 5,
 };
 
 enum omap_plane {
@@ -237,6 +238,13 @@ static inline int omap_display_init(struct omap_dss_board_info *board_data)
 }
 #endif
 
+struct omap_display_platform_data {
+	struct omap_dss_board_info *board_data;
+	/* TODO: Additional members to be added when PM is considered */
+
+	bool (*opt_clock_available)(const char *clk_role);
+};
+
 struct omap_video_timings {
 	/* Unit: pixels */
 	u16 x_res;
@@ -396,8 +404,8 @@ struct omap_dss_device {
 			struct {
 				u16 regn;
 				u16 regm;
-				u16 regm3;
-				u16 regm4;
+				u16 regm_dispc;
+				u16 regm_dsi;
 
 				u16 lp_clk_div;
 
@@ -555,6 +563,9 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
 		int channel,
 		u16 x, u16 y, u16 w, u16 h,
 		void (*callback)(int, void *), void *data);
+int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel);
+int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id);
+void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel);
 
 int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
 void omapdss_dsi_display_disable(struct omap_dss_device *dssdev);