Merge ../powerpc-merge

8 files changed, 56 insertions, 66 deletions

diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 2f9deca31cc..e18eb79bf85 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -354,21 +354,6 @@ config HPET_TIMER
 	  as it is off-chip.  You can find the HPET spec at
 	  <http://www.intel.com/hardwaredesign/hpetspec.htm>.
 
-config X86_PM_TIMER
-	bool "PM timer" if EMBEDDED
-	depends on ACPI
-	default y
-	help
-	  Support the ACPI PM timer for time keeping. This is slow,
-	  but is useful on some chipsets without HPET on systems with more
-	  than one CPU. On a single processor or single socket multi core
-	  system it is normally not required.
-	  When the PM timer is active 64bit vsyscalls are disabled
-	  and should not be enabled (/proc/sys/kernel/vsyscall64 should
-	  not be changed).
-	  The kernel selects the PM timer only as a last resort, so it is
-	  useful to enable just in case.
-
 config HPET_EMULATE_RTC
 	bool "Provide RTC interrupt"
 	depends on HPET_TIMER && RTC=y
@@ -592,6 +577,7 @@ source "arch/x86_64/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index 72fe60c20d3..a098a11e775 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -43,7 +43,7 @@ CFLAGS_vsyscall.o		:= $(PROFILING) -g0
 
 bootflag-y			+= ../../i386/kernel/bootflag.o
 cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../i386/kernel/cpuid.o
-topology-y                     += ../../i386/mach-default/topology.o
+topology-y                     += ../../i386/kernel/topology.o
 microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../i386/kernel/microcode.o
 intel_cacheinfo-y		+= ../../i386/kernel/cpu/intel_cacheinfo.o
 quirks-y			+= ../../i386/kernel/quirks.o
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index e4e2b7d01f8..a0f955b9995 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -248,7 +248,7 @@ void __init iommu_hole_init(void)
 		/* Got the aperture from the AGP bridge */
 	} else if (swiotlb && !valid_agp) {
 		/* Do nothing */
-	} else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
+	} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
 		   valid_agp ||
 		   fallback_aper_force) { 
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 2585c1d92b2..ffed464e6b1 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -50,6 +50,8 @@ static int no_timer_check;
 
 int disable_timer_pin_1 __initdata;
 
+int timer_over_8254 __initdata = 1;
+
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
@@ -251,6 +253,20 @@ static int __init enable_ioapic_setup(char *str)
 __setup("noapic", disable_ioapic_setup);
 __setup("apic", enable_ioapic_setup);
 
+static int __init setup_disable_8254_timer(char *s)
+{
+	timer_over_8254 = -1;
+	return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+	timer_over_8254 = 2;
+	return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 #include <asm/pci-direct.h>
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
@@ -309,27 +325,20 @@ void __init check_ioapic(void)
 #endif
 					/* RED-PEN skip them on mptables too? */
 					return;
+
+				/* This should be actually default, but
+				   for 2.6.16 let's do it for ATI only where
+				   it's really needed. */
 				case PCI_VENDOR_ID_ATI:
-					if (apic_runs_main_timer != 0)
-						break;
-#ifdef CONFIG_ACPI
-					/* Don't do this for laptops right
-					   right now because their timer
-					   doesn't necessarily tick in C2/3 */
-					if (acpi_fadt.revision >= 3 &&
-			(acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
-						printk(KERN_INFO
-"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
-						break;
-					}
-#endif					
+					if (timer_over_8254 == 1) {	
+						timer_over_8254 = 0;	
 					printk(KERN_INFO
-	     "ATI board detected. Using APIC/PM timer.\n");
-					apic_runs_main_timer = 1;
-					nohpet = 1;
+		"ATI board detected. Disabling timer routing over 8254.\n");
+					}	
 					return;
 				} 
 
+
 				/* No multi-function device? */
 				type = read_pci_config_byte(num,slot,func,
 							    PCI_HEADER_TYPE);
@@ -1773,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void)
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
  * fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
  */
 static inline void check_timer(void)
 {
@@ -1795,7 +1806,8 @@ static inline void check_timer(void)
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	enable_8259A_irq(0);
+	if (timer_over_8254 > 0)
+		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -1850,7 +1862,7 @@ static inline void check_timer(void)
 	}
 	printk(" failed.\n");
 
-	if (nmi_watchdog) {
+	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = 0;
 	}
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index dd0718dc178..0c3f052ba6c 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -228,11 +228,6 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size
 	int mmu = high;
 	if (force_iommu) 
 		mmu = 1; 
-	if (no_iommu) { 
-		if (high) 
-			panic("PCI-DMA: high address but no IOMMU.\n"); 
-		mmu = 0; 
-	} 	
 	return mmu; 
 }
 
@@ -241,11 +236,6 @@ static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t
 	u64 mask = *dev->dma_mask;
 	int high = addr + size >= mask;
 	int mmu = high;
-	if (no_iommu) { 
-		if (high) 
-			panic("PCI-DMA: high address but no IOMMU.\n"); 
-		mmu = 0; 
-	} 	
 	return mmu; 
 }
 
@@ -310,7 +300,7 @@ void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int di
 
 	for (i = 0; i < nents; i++) {
 		struct scatterlist *s = &sg[i];
-		if (!s->dma_length)
+		if (!s->dma_length || !s->length)
 			break;
 		dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
 	}
@@ -364,6 +354,7 @@ static int __dma_map_cont(struct scatterlist *sg, int start, int stopat,
 		
 		BUG_ON(i > start && s->offset);
 		if (i == start) {
+			*sout = *s; 
 			sout->dma_address = iommu_bus_base;
 			sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
 			sout->dma_length = s->length;
@@ -390,6 +381,7 @@ static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat,
 {
 	if (!need) { 
 		BUG_ON(stopat - start != 1);
+		*sout = sg[start]; 
 		sout->dma_length = sg[start].length; 
 		return 0;
 	} 
@@ -632,17 +624,13 @@ static int __init pci_iommu_init(void)
 		(agp_copy_info(agp_bridge, &info) < 0);
 #endif	
 
-	if (swiotlb) { 
-		no_iommu = 1;
+	if (swiotlb)
 		return -1; 
-	} 
-	
+
 	if (no_iommu ||
 	    (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
 	    !iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
-		no_iommu = 1;
-		no_iommu_init();
 		printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
 		if (end_pfn > MAX_DMA32_PFN) {
 			printk(KERN_ERR "WARNING more than 4GB of memory "
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 9435ab7d6fb..aa55e3cec66 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -423,6 +423,12 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 		else if(!memcmp(from, "elfcorehdr=", 11))
 			elfcorehdr_addr = memparse(from+11, &from);
 #endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+		else if (!memcmp(from, "additional_cpus=", 16))
+			setup_additional_cpus(from+16);
+#endif
+
 	next_char:
 		c = *(from++);
 		if (!c)
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 67e4e28f4df..66e98659d07 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -1152,8 +1152,6 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	setup_ioapic_dest();
 #endif
 
-	time_init_gtod();
-
 	check_nmi_watchdog();
 }
 
@@ -1244,7 +1242,7 @@ void __cpu_die(unsigned int cpu)
  	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
 
-static __init int setup_additional_cpus(char *s)
+__init int setup_additional_cpus(char *s)
 {
 	return get_option(&s, &additional_cpus);
 }
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 67841d11ed1..3080f84bf7b 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void);
 extern void i8254_timer_resume(void);
 extern int using_apic_timer;
 
+static char *time_init_gtod(void);
+
 DEFINE_SPINLOCK(rtc_lock);
 DEFINE_SPINLOCK(i8253_lock);
 
@@ -901,6 +903,7 @@ static struct irqaction irq0 = {
 void __init time_init(void)
 {
 	char *timename;
+	char *gtod;
 
 #ifdef HPET_HACK_ENABLE_DANGEROUS
         if (!vxtime.hpet_address) {
@@ -945,21 +948,19 @@ void __init time_init(void)
 		timename = "PIT";
 	}
 
-	printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
-	       vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+	vxtime.mode = VXTIME_TSC;
+	gtod = time_init_gtod();
+
+	printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+	       vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
 	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
 		cpu_khz / 1000, cpu_khz % 1000);
-	vxtime.mode = VXTIME_TSC;
 	vxtime.quot = (1000000L << 32) / vxtime_hz;
 	vxtime.tsc_quot = (1000L << 32) / cpu_khz;
 	vxtime.last_tsc = get_cycles_sync();
 	setup_irq(0, &irq0);
 
 	set_cyc2ns_scale(cpu_khz);
-
-#ifndef CONFIG_SMP
-	time_init_gtod();
-#endif
 }
 
 /*
@@ -981,9 +982,9 @@ __cpuinit int unsynchronized_tsc(void)
 }
 
 /*
- * Decide after all CPUs are booted what mode gettimeofday should use.
+ * Decide what mode gettimeofday should use.
  */
-void __init time_init_gtod(void)
+__init static char *time_init_gtod(void)
 {
 	char *timetype;
 
@@ -1011,8 +1012,7 @@ void __init time_init_gtod(void)
 		timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
 		vxtime.mode = VXTIME_TSC;
 	}
-
-	printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+	return timetype;
 }
 
 __setup("report_lost_ticks", time_setup);