Merge rsync://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	include/linux/kernel.h

81 files changed, 2889 insertions, 1114 deletions

diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 408d44a5975..e856804c447 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -299,6 +299,7 @@ config X86_64_ACPI_NUMA
        bool "ACPI NUMA detection"
        depends on NUMA
        select ACPI 
+	select PCI
        select ACPI_NUMA
        default y
        help
@@ -369,6 +370,8 @@ config HOTPLUG_CPU
 		can be controlled through /sys/devices/system/cpu/cpu#.
 		Say N if you want to disable CPU hotplug.
 
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y
 
 config HPET_TIMER
 	bool
@@ -385,27 +388,47 @@ config HPET_EMULATE_RTC
 	bool "Provide RTC interrupt"
 	depends on HPET_TIMER && RTC=y
 
-config GART_IOMMU
-	bool "K8 GART IOMMU support"
+# Mark as embedded because too many people got it wrong.
+# The code disables itself when not needed.
+config IOMMU
+	bool "IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
+	select AGP
 	depends on PCI
 	help
-	  Support for hardware IOMMU in AMD's Opteron/Athlon64 Processors
-	  and for the bounce buffering software IOMMU.
-	  Needed to run systems with more than 3GB of memory properly with
-	  32-bit PCI devices that do not support DAC (Double Address Cycle).
-	  The IOMMU can be turned off at runtime with the iommu=off parameter.
-  	  Normally the kernel will take the right choice by itself.
-  	  This option includes a driver for the AMD Opteron/Athlon64 IOMMU
-  	  northbridge and a software emulation used on other systems without
-	  hardware IOMMU.  If unsure, say Y.
-
-# need this always enabled with GART_IOMMU for the VIA workaround
+	  Support for full DMA access of devices with 32bit memory access only
+	  on systems with more than 3GB. This is usually needed for USB,
+	  sound, many IDE/SATA chipsets and some other devices.
+	  Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
+	  based IOMMU and a software bounce buffer based IOMMU used on Intel
+	  systems and as fallback.
+	  The code is only active when needed (enough memory and limited
+	  device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
+	  too.
+
+config CALGARY_IOMMU
+	bool "IBM Calgary IOMMU support"
+	default y
+	select SWIOTLB
+	depends on PCI && EXPERIMENTAL
+	help
+	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
+	  systems. Needed to run systems with more than 3GB of memory
+	  properly with 32-bit PCI devices that do not support DAC
+	  (Double Address Cycle). Calgary also supports bus level
+	  isolation, where all DMAs pass through the IOMMU.  This
+	  prevents them from going anywhere except their intended
+	  destination. This catches hard-to-find kernel bugs and
+	  mis-behaving drivers and devices that do not use the DMA-API
+	  properly to set up their DMA buffers.  The IOMMU can be
+	  turned off at boot time with the iommu=off parameter.
+	  Normally the kernel will make the right choice by itself.
+	  If unsure, say Y.
+
+# need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
 	bool
-	default y
-	depends on GART_IOMMU
 
 config X86_MCE
 	bool "Machine check support" if EMBEDDED
@@ -438,10 +461,10 @@ config KEXEC
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is indepedent of the system firmware.   And like a reboot
+	  but it is independent of the system firmware.   And like a reboot
 	  you can start any kernel with it, not just Linux.
 
-	  The name comes from the similiarity to the exec system call.
+	  The name comes from the similarity to the exec system call.
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
@@ -501,6 +524,10 @@ config REORDER
          optimal TLB usage. If you have pretty much any version of binutils, 
 	 this can increase your kernel build time by roughly one minute.
 
+config K8_NB
+	def_bool y
+	depends on AGP_AMD64 || IOMMU || (PCI && NUMA)
+
 endmenu
 
 #
diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug
index ea31b4c6210..1d92ab56c0f 100644
--- a/arch/x86_64/Kconfig.debug
+++ b/arch/x86_64/Kconfig.debug
@@ -13,7 +13,7 @@ config DEBUG_RODATA
 	 If in doubt, say "N".
 
 config IOMMU_DEBUG
-       depends on GART_IOMMU && DEBUG_KERNEL
+       depends on IOMMU && DEBUG_KERNEL
        bool "Enable IOMMU debugging"
        help
          Force the IOMMU to on even when you have less than 4GB of
@@ -35,6 +35,22 @@ config IOMMU_LEAK
          Add a simple leak tracer to the IOMMU code. This is useful when you
 	 are debugging a buggy device driver that leaks IOMMU mappings.
 
+config DEBUG_STACKOVERFLOW
+        bool "Check for stack overflows"
+        depends on DEBUG_KERNEL
+        help
+	  This option will cause messages to be printed if free stack space
+	  drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+        bool "Stack utilization instrumentation"
+        depends on DEBUG_KERNEL
+        help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
 #config X86_REMOTE_DEBUG
 #       bool "kgdb debugging stub"
 
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index e573e2ab551..431bb4bc36c 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -27,6 +27,7 @@ LDFLAGS_vmlinux :=
 CHECKFLAGS      += -D__x86_64__ -m64
 
 cflags-y	:=
+cflags-kernel-y	:=
 cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
 cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
 cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
@@ -35,7 +36,7 @@ cflags-y += -m64
 cflags-y += -mno-red-zone
 cflags-y += -mcmodel=kernel
 cflags-y += -pipe
-cflags-$(CONFIG_REORDER) += -ffunction-sections
+cflags-kernel-$(CONFIG_REORDER) += -ffunction-sections
 # this makes reading assembly source easier, but produces worse code
 # actually it makes the kernel smaller too.
 cflags-y += -fno-reorder-blocks
@@ -55,6 +56,7 @@ cflags-y += $(call cc-option,-funit-at-a-time)
 cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 
 CFLAGS += $(cflags-y)
+CFLAGS_KERNEL += $(cflags-kernel-y)
 AFLAGS += -m64
 
 head-y := arch/x86_64/kernel/head.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task.o
diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile
index 43ee6c50c27..deb063e7762 100644
--- a/arch/x86_64/boot/Makefile
+++ b/arch/x86_64/boot/Makefile
@@ -107,8 +107,13 @@ fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
 isoimage: $(BOOTIMAGE)
 	-rm -rf $(obj)/isoimage
 	mkdir $(obj)/isoimage
-	cp `echo /usr/lib*/syslinux/isolinux.bin | awk '{ print $1; }'` \
-		$(obj)/isoimage
+	for i in lib lib64 share end ; do \
+		if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
+			cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
+			break ; \
+		fi ; \
+		if [ $$i = end ] ; then exit 1 ; fi ; \
+	done
 	cp $(BOOTIMAGE) $(obj)/isoimage/linux
 	echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
 	if [ -f '$(FDINITRD)' ] ; then \
diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86_64/boot/compressed/misc.c
index cf4b88c416d..3755b2e394d 100644
--- a/arch/x86_64/boot/compressed/misc.c
+++ b/arch/x86_64/boot/compressed/misc.c
@@ -77,11 +77,11 @@ static void gzip_release(void **);
  */
 static unsigned char *real_mode; /* Pointer to real-mode data */
 
-#define EXT_MEM_K   (*(unsigned short *)(real_mode + 0x2))
+#define RM_EXT_MEM_K   (*(unsigned short *)(real_mode + 0x2))
 #ifndef STANDARD_MEMORY_BIOS_CALL
-#define ALT_MEM_K   (*(unsigned long *)(real_mode + 0x1e0))
+#define RM_ALT_MEM_K   (*(unsigned long *)(real_mode + 0x1e0))
 #endif
-#define SCREEN_INFO (*(struct screen_info *)(real_mode+0))
+#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0))
 
 extern unsigned char input_data[];
 extern int input_len;
@@ -92,9 +92,9 @@ static unsigned long output_ptr = 0;
 
 static void *malloc(int size);
 static void free(void *where);
- 
-void* memset(void* s, int c, unsigned n);
-void* memcpy(void* dest, const void* src, unsigned n);
+
+static void *memset(void *s, int c, unsigned n);
+static void *memcpy(void *dest, const void *src, unsigned n);
 
 static void putstr(const char *);
 
@@ -162,8 +162,8 @@ static void putstr(const char *s)
 	int x,y,pos;
 	char c;
 
-	x = SCREEN_INFO.orig_x;
-	y = SCREEN_INFO.orig_y;
+	x = RM_SCREEN_INFO.orig_x;
+	y = RM_SCREEN_INFO.orig_y;
 
 	while ( ( c = *s++ ) != '\0' ) {
 		if ( c == '\n' ) {
@@ -184,8 +184,8 @@ static void putstr(const char *s)
 		}
 	}
 
-	SCREEN_INFO.orig_x = x;
-	SCREEN_INFO.orig_y = y;
+	RM_SCREEN_INFO.orig_x = x;
+	RM_SCREEN_INFO.orig_y = y;
 
 	pos = (x + cols * y) * 2;	/* Update cursor position */
 	outb_p(14, vidport);
@@ -194,7 +194,7 @@ static void putstr(const char *s)
 	outb_p(0xff & (pos >> 1), vidport+1);
 }
 
-void* memset(void* s, int c, unsigned n)
+static void* memset(void* s, int c, unsigned n)
 {
 	int i;
 	char *ss = (char*)s;
@@ -203,7 +203,7 @@ void* memset(void* s, int c, unsigned n)
 	return s;
 }
 
-void* memcpy(void* dest, const void* src, unsigned n)
+static void* memcpy(void* dest, const void* src, unsigned n)
 {
 	int i;
 	char *d = (char *)dest, *s = (char *)src;
@@ -278,15 +278,15 @@ static void error(char *x)
 	putstr(x);
 	putstr("\n\n -- System halted");
 
-	while(1);
+	while(1);	/* Halt */
 }
 
-void setup_normal_output_buffer(void)
+static void setup_normal_output_buffer(void)
 {
 #ifdef STANDARD_MEMORY_BIOS_CALL
-	if (EXT_MEM_K < 1024) error("Less than 2MB of memory");
+	if (RM_EXT_MEM_K < 1024) error("Less than 2MB of memory");
 #else
-	if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) error("Less than 2MB of memory");
+	if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory");
 #endif
 	output_data = (unsigned char *)__PHYSICAL_START; /* Normally Points to 1M */
 	free_mem_end_ptr = (long)real_mode;
@@ -297,13 +297,13 @@ struct moveparams {
 	uch *high_buffer_start; int hcount;
 };
 
-void setup_output_buffer_if_we_run_high(struct moveparams *mv)
+static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
 {
 	high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE);
 #ifdef STANDARD_MEMORY_BIOS_CALL
-	if (EXT_MEM_K < (3*1024)) error("Less than 4MB of memory");
+	if (RM_EXT_MEM_K < (3*1024)) error("Less than 4MB of memory");
 #else
-	if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory");
+	if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory");
 #endif	
 	mv->low_buffer_start = output_data = (unsigned char *)LOW_BUFFER_START;
 	low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX
@@ -319,7 +319,7 @@ void setup_output_buffer_if_we_run_high(struct moveparams *mv)
 	mv->high_buffer_start = high_buffer_start;
 }
 
-void close_output_buffer_if_we_run_high(struct moveparams *mv)
+static void close_output_buffer_if_we_run_high(struct moveparams *mv)
 {
 	if (bytes_out > low_buffer_size) {
 		mv->lcount = low_buffer_size;
@@ -335,7 +335,7 @@ int decompress_kernel(struct moveparams *mv, void *rmode)
 {
 	real_mode = rmode;
 
-	if (SCREEN_INFO.orig_video_mode == 7) {
+	if (RM_SCREEN_INFO.orig_video_mode == 7) {
 		vidmem = (char *) 0xb0000;
 		vidport = 0x3b4;
 	} else {
@@ -343,8 +343,8 @@ int decompress_kernel(struct moveparams *mv, void *rmode)
 		vidport = 0x3d4;
 	}
 
-	lines = SCREEN_INFO.orig_video_lines;
-	cols = SCREEN_INFO.orig_video_cols;
+	lines = RM_SCREEN_INFO.orig_video_lines;
+	cols = RM_SCREEN_INFO.orig_video_cols;
 
 	if (free_mem_ptr < 0x100000) setup_normal_output_buffer();
 	else setup_output_buffer_if_we_run_high(mv);
diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
index 12ea0b6c52e..7de8b8fd168 100644
--- a/arch/x86_64/boot/setup.S
+++ b/arch/x86_64/boot/setup.S
@@ -45,7 +45,6 @@
  * Added long mode checking and SSE force. March 2003, Andi Kleen.		
  */
 
-#include <linux/config.h>
 #include <asm/segment.h>
 #include <linux/version.h>
 #include <linux/compile.h>
diff --git a/arch/x86_64/boot/tools/build.c b/arch/x86_64/boot/tools/build.c
index c44f5e2ec10..eae86691709 100644
--- a/arch/x86_64/boot/tools/build.c
+++ b/arch/x86_64/boot/tools/build.c
@@ -149,10 +149,8 @@ int main(int argc, char ** argv)
 	sz = sb.st_size;
 	fprintf (stderr, "System is %d kB\n", sz/1024);
 	sys_size = (sz + 15) / 16;
-	/* 0x40000*16 = 4.0 MB, reasonable estimate for the current maximum */
-	if (sys_size > (is_big_kernel ? 0x40000 : DEF_SYSSIZE))
-		die("System is too big. Try using %smodules.",
-			is_big_kernel ? "" : "bzImage or ");
+	if (!is_big_kernel && sys_size > DEF_SYSSIZE)
+		die("System is too big. Try using bzImage or modules.");
 	while (sz > 0) {
 		int l, n;
 
diff --git a/arch/x86_64/boot/video.S b/arch/x86_64/boot/video.S
index 32327bb37af..2aa565c136e 100644
--- a/arch/x86_64/boot/video.S
+++ b/arch/x86_64/boot/video.S
@@ -1929,6 +1929,7 @@ skip10:	movb	%ah, %al
 	ret
 
 store_edid:
+#ifdef CONFIG_FIRMWARE_EDID
 	pushw	%es				# just save all registers
 	pushw	%ax
 	pushw	%bx
@@ -1946,6 +1947,22 @@ store_edid:
 	rep
 	stosl
 
+	pushw   %es				# save ES
+	xorw    %di, %di                        # Report Capability
+	pushw   %di
+	popw    %es                             # ES:DI must be 0:0
+	movw	$0x4f15, %ax
+	xorw	%bx, %bx
+	xorw	%cx, %cx
+	int	$0x10
+	popw    %es                             # restore ES
+
+	cmpb    $0x00, %ah                      # call successful
+	jne     no_edid
+
+	cmpb    $0x4f, %al                      # function supported
+	jne     no_edid
+
 	movw	$0x4f15, %ax                    # do VBE/DDC
 	movw	$0x01, %bx
 	movw	$0x00, %cx
@@ -1953,12 +1970,14 @@ store_edid:
 	movw	$0x140, %di
 	int	$0x10
 
+no_edid:
 	popw	%di				# restore all registers
 	popw	%dx
 	popw	%cx
 	popw	%bx
 	popw	%ax
 	popw	%es