xen: make direct versions of irq_enable/disable/save/restore to common code

Now that x86-64 has directly accessible percpu variables, it can also
implement the direct versions of these operations, which operate on a
vcpu_info structure directly embedded in the percpu area.

In fact, the 64-bit versions are more or less identical, and so can be
shared.  The only two differences are:
 1. xen_restore_fl_direct takes its argument in eax on 32-bit, and rdi on 64-bit.
    Unfortunately it isn't possible to directly refer to the 2nd lsb of rdi directly
    (as you can with %ah), so the code isn't quite as dense.
 2. check_events needs to variants to save different registers.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

1 files changed, 3 insertions, 131 deletions

diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index d6fc51f4ce8..d205a283efe 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -11,142 +11,14 @@
 	generally too large to inline anyway.
  */
 
-#include <linux/linkage.h>
-
-#include <asm/asm-offsets.h>
-#include <asm/processor-flags.h>
 #include <asm/errno.h>
-#include <asm/segment.h>
 #include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
 
 #include <xen/interface/xen.h>
 
-#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
-#define ENDPATCH(x)	.globl x##_end; x##_end=.
-
-/* Pseudo-flag used for virtual NMI, which we don't implement yet */
-#define XEN_EFLAGS_NMI	0x80000000
-
-#if 1
-/*
-	FIXME: x86_64 now can support direct access to percpu variables
-	via a segment override.  Update xen accordingly.
- */
-#define BUG			ud2a
-#endif
-
-/*
-	Enable events.  This clears the event mask and tests the pending
-	event status with one and operation.  If there are pending
-	events, then enter the hypervisor to get them handled.
- */
-ENTRY(xen_irq_enable_direct)
-	BUG
-
-	/* Unmask events */
-	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
-
-	/* Test for pending */
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
-
-2:	call check_events
-1:
-ENDPATCH(xen_irq_enable_direct)
-	ret
-	ENDPROC(xen_irq_enable_direct)
-	RELOC(xen_irq_enable_direct, 2b+1)
-
-/*
-	Disabling events is simply a matter of making the event mask
-	non-zero.
- */
-ENTRY(xen_irq_disable_direct)
-	BUG
-
-	movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-ENDPATCH(xen_irq_disable_direct)
-	ret
-	ENDPROC(xen_irq_disable_direct)
-	RELOC(xen_irq_disable_direct, 0)
-
-/*
-	(xen_)save_fl is used to get the current interrupt enable status.
-	Callers expect the status to be in X86_EFLAGS_IF, and other bits
-	may be set in the return value.  We take advantage of this by
-	making sure that X86_EFLAGS_IF has the right value (and other bits
-	in that byte are 0), but other bits in the return value are
-	undefined.  We need to toggle the state of the bit, because
-	Xen and x86 use opposite senses (mask vs enable).
- */
-ENTRY(xen_save_fl_direct)
-	BUG
-
-	testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-	setz %ah
-	addb %ah,%ah
-ENDPATCH(xen_save_fl_direct)
-	ret
-	ENDPROC(xen_save_fl_direct)
-	RELOC(xen_save_fl_direct, 0)
-
-/*
-	In principle the caller should be passing us a value return
-	from xen_save_fl_direct, but for robustness sake we test only
-	the X86_EFLAGS_IF flag rather than the whole byte. After
-	setting the interrupt mask state, it checks for unmasked
-	pending events and enters the hypervisor to get them delivered
-	if so.
- */
-ENTRY(xen_restore_fl_direct)
-	BUG
-
-	testb $X86_EFLAGS_IF>>8, %ah
-	setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
-	/* Preempt here doesn't matter because that will deal with
-	   any pending interrupts.  The pending check may end up being
-	   run on the wrong CPU, but that doesn't hurt. */
-
-	/* check for unmasked and pending */
-	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
-	jz 1f
-2:	call check_events
-1:
-ENDPATCH(xen_restore_fl_direct)
-	ret
-	ENDPROC(xen_restore_fl_direct)
-	RELOC(xen_restore_fl_direct, 2b+1)
-
-
-/*
-	Force an event check by making a hypercall,
-	but preserve regs before making the call.
- */
-check_events:
-	push %rax
-	push %rcx
-	push %rdx
-	push %rsi
-	push %rdi
-	push %r8
-	push %r9
-	push %r10
-	push %r11
-	call xen_force_evtchn_callback
-	pop %r11
-	pop %r10
-	pop %r9
-	pop %r8
-	pop %rdi
-	pop %rsi
-	pop %rdx
-	pop %rcx
-	pop %rax
-	ret
+#include "xen-asm.h"
 
 ENTRY(xen_adjust_exception_frame)
 	mov 8+0(%rsp),%rcx