x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS

Currently "nox2apic" boot parameter was not enabling x2apic mode if the cpu,
kernel are all capable of enabling x2apic mode and the OS handover
happened in xapic mode.

However If the bios enabled x2apic prior to OS handover, using "nox2apic"
boot parameter had no effect.

If the boot cpu's apicid is < 255, enable "nox2apic" boot parameter to
disable the x2apic mode setup by the bios. This will enable the kernel to
fallback to xapic mode and bringup only the cpu's which has apic-id < 255.

-v2: fix patch error and two compiling warning
	make disable_x2apic to be __init

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/CAE9FiQUeB-3uxJAMiHsz=uPWoFv5Hg1pVepz7aU6YtqOxMC-=Q@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

1 files changed, 27 insertions, 10 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 2c07aebbb6f..ff69d5d79ca 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -148,15 +148,24 @@ int x2apic_mode;
 /* x2apic enabled before OS handover */
 int x2apic_preenabled;
 static int x2apic_disabled;
+static int nox2apic;
 static __init int setup_nox2apic(char *str)
 {
 	if (x2apic_enabled()) {
-		pr_warning("Bios already enabled x2apic, "
-			   "can't enforce nox2apic");
-		return 0;
-	}
+		int apicid = native_apic_msr_read(APIC_ID);
+
+		if (apicid >= 255) {
+			pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
+				   apicid);
+			return 0;
+		}
+
+		pr_warning("x2apic already enabled. will disable it\n");
+	} else
+		setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+
+	nox2apic = 1;
 
-	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
 }
 early_param("nox2apic", setup_nox2apic);
@@ -1443,7 +1452,7 @@ static inline void __disable_x2apic(u64 msr)
 	wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
 }
 
-static void disable_x2apic(void)
+static __init void disable_x2apic(void)
 {
 	u64 msr;
 
@@ -1460,6 +1469,11 @@ static void disable_x2apic(void)
 		pr_info("Disabling x2apic\n");
 		__disable_x2apic(msr);
 
+		if (nox2apic) {
+			clear_cpu_cap(&cpu_data(0), X86_FEATURE_X2APIC);
+			setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+		}
+
 		x2apic_disabled = 1;
 		x2apic_mode = 0;
 
@@ -1534,13 +1548,16 @@ void __init enable_IR_x2apic(void)
 	legacy_pic->mask_all();
 	mask_ioapic_entries();
 
+	if (x2apic_preenabled && nox2apic)
+		disable_x2apic();
+
 	if (dmar_table_init_ret)
 		ret = -1;
 	else
 		ret = enable_IR();
 
 	if (!x2apic_supported())
-		goto nox2apic;
+		goto skip_x2apic;
 
 	if (ret < 0) {
 		/* IR is required if there is APIC ID > 255 even when running
@@ -1550,7 +1567,7 @@ void __init enable_IR_x2apic(void)
 		    !hypervisor_x2apic_available()) {
 			if (x2apic_preenabled)
 				disable_x2apic();
-			goto nox2apic;
+			goto skip_x2apic;
 		}
 		/*
 		 * without IR all CPUs can be addressed by IOAPIC/MSI
@@ -1561,7 +1578,7 @@ void __init enable_IR_x2apic(void)
 
 	if (ret == IRQ_REMAP_XAPIC_MODE) {
 		pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
-		goto nox2apic;
+		goto skip_x2apic;
 	}
 
 	x2apic_enabled = 1;
@@ -1572,7 +1589,7 @@ void __init enable_IR_x2apic(void)
 		pr_info("Enabled x2apic\n");
 	}
 
-nox2apic:
+skip_x2apic:
 	if (ret < 0) /* IR enabling failed */
 		restore_ioapic_entries();
 	legacy_pic->restore_mask();