x86: replacing mp_config_intsrc with mpc_intsrc

Impact: cleanup, solve 80 columns wrap problems

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 32 insertions, 32 deletions

diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 6c51ecdfbf4..79b8c0c72d3 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -87,7 +87,7 @@ struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
 /* MP IRQ source entries */
-struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
@@ -945,10 +945,10 @@ static int find_irq_entry(int apic, int pin, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == type &&
-		    (mp_irqs[i].mp_dstapic == mp_ioapics[apic].apicid ||
-		     mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mp_dstirq == pin)
+		if (mp_irqs[i].irqtype == type &&
+		    (mp_irqs[i].dstapic == mp_ioapics[apic].apicid ||
+		     mp_irqs[i].dstapic == MP_APIC_ALL) &&
+		    mp_irqs[i].dstirq == pin)
 			return i;
 
 	return -1;
@@ -962,13 +962,13 @@ static int __init find_isa_irq_pin(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
+		int lbus = mp_irqs[i].srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
+		    (mp_irqs[i].irqtype == type) &&
+		    (mp_irqs[i].srcbusirq == irq))
 
-			return mp_irqs[i].mp_dstirq;
+			return mp_irqs[i].dstirq;
 	}
 	return -1;
 }
@@ -978,17 +978,17 @@ static int __init find_isa_irq_apic(int irq, int type)
 	int i;
 
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
+		int lbus = mp_irqs[i].srcbus;
 
 		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mp_irqtype == type) &&
-		    (mp_irqs[i].mp_srcbusirq == irq))
+		    (mp_irqs[i].irqtype == type) &&
+		    (mp_irqs[i].srcbusirq == irq))
 			break;
 	}
 	if (i < mp_irq_entries) {
 		int apic;
 		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].apicid == mp_irqs[i].mp_dstapic)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic)
 				return apic;
 		}
 	}
@@ -1013,23 +1013,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 		return -1;
 	}
 	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mp_srcbus;
+		int lbus = mp_irqs[i].srcbus;
 
 		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].apicid == mp_irqs[i].mp_dstapic ||
-			    mp_irqs[i].mp_dstapic == MP_APIC_ALL)
+			if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+			    mp_irqs[i].dstapic == MP_APIC_ALL)
 				break;
 
 		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mp_irqtype &&
+		    !mp_irqs[i].irqtype &&
 		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
+		    (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+			int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
 
 			if (!(apic || IO_APIC_IRQ(irq)))
 				continue;
 
-			if (pin == (mp_irqs[i].mp_srcbusirq & 3))
+			if (pin == (mp_irqs[i].srcbusirq & 3))
 				return irq;
 			/*
 			 * Use the first all-but-pin matching entry as a
@@ -1072,7 +1072,7 @@ static int EISA_ELCR(unsigned int irq)
  * EISA conforming in the MP table, that means its trigger type must
  * be read in from the ELCR */
 
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
+#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
 #define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
 /* PCI interrupts are always polarity one level triggered,
@@ -1089,13 +1089,13 @@ static int EISA_ELCR(unsigned int irq)
 
 static int MPBIOS_polarity(int idx)
 {
-	int bus = mp_irqs[idx].mp_srcbus;
+	int bus = mp_irqs[idx].srcbus;
 	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].mp_irqflag & 3)
+	switch (mp_irqs[idx].irqflag & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent polarity */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -1131,13 +1131,13 @@ static int MPBIOS_polarity(int idx)
 
 static int MPBIOS_trigger(int idx)
 {
-	int bus = mp_irqs[idx].mp_srcbus;
+	int bus = mp_irqs[idx].srcbus;
 	int trigger;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
+	switch ((mp_irqs[idx].irqflag>>2) & 3)
 	{
 		case 0: /* conforms, ie. bus-type dependent */
 			if (test_bit(bus, mp_bus_not_pci))
@@ -1215,16 +1215,16 @@ int (*ioapic_renumber_irq)(int ioapic, int irq);
 static int pin_2_irq(int idx, int apic, int pin)
 {
 	int irq, i;
-	int bus = mp_irqs[idx].mp_srcbus;
+	int bus = mp_irqs[idx].srcbus;
 
 	/*
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
-	if (mp_irqs[idx].mp_dstirq != pin)
+	if (mp_irqs[idx].dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mp_srcbusirq;
+		irq = mp_irqs[idx].srcbusirq;
 	} else {
 		/*
 		 * PCI IRQs are mapped in order
@@ -2164,8 +2164,8 @@ static void __init setup_ioapic_ids_from_mpc(void)
 		 */
 		if (old_id != mp_ioapics[apic].apicid)
 			for (i = 0; i < mp_irq_entries; i++)
-				if (mp_irqs[i].mp_dstapic == old_id)
-					mp_irqs[i].mp_dstapic
+				if (mp_irqs[i].dstapic == old_id)
+					mp_irqs[i].dstapic
 						= mp_ioapics[apic].apicid;
 
 		/*
@@ -3983,8 +3983,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 		return -1;
 
 	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mp_irqtype == mp_INT &&
-		    mp_irqs[i].mp_srcbusirq == bus_irq)
+		if (mp_irqs[i].irqtype == mp_INT &&
+		    mp_irqs[i].srcbusirq == bus_irq)
 			break;
 	if (i >= mp_irq_entries)
 		return -1;