diff options
| author | Andreas Herrmann <andreas.herrmann3@amd.com> | 2009-04-21 20:00:37 +0200 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2009-04-22 15:53:40 +0200 |
| commit | 7a6f9cbb37120c745fc187083fb5c3de4dca4f97 (patch) | |
| tree | b943ff6c61085506cde9d92bfb5b859b5b3c6872 /arch/x86/kernel/hpet.c | |
| parent | 3568b71d46bea87da1936902b6fbb2a3b1154b3d (diff) | |
x86: hpet: fix periodic mode programming on AMD 81xx
(See http://bugzilla.kernel.org/show_bug.cgi?id=12961)
It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403
(x86: hpet: stop HPET_COUNTER when programming periodic mode)
HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL
cleared) to T0_CMP register to set the period in periodic mode.
With this patch HPET_COUNTER is still stopped but not reset when HPET
is programmed in periodic mode. This should help to avoid races when
HPET is programmed in periodic mode and fixes a boot time hang that
I've observed on a machine when using 1000HZ.
[ Impact: fix boot time hang on machines with AMD 81xx chipset ]
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Jeff Mahoney <jeffm@suse.com>
LKML-Reference: <20090421180037.GA2763@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/kernel/hpet.c')
| -rw-r--r-- | arch/x86/kernel/hpet.c | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3f0019e0a22..81408b93f88 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -236,6 +236,10 @@ static void hpet_stop_counter(void) unsigned long cfg = hpet_readl(HPET_CFG); cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); +} + +static void hpet_reset_counter(void) +{ hpet_writel(0, HPET_COUNTER); hpet_writel(0, HPET_COUNTER + 4); } @@ -250,6 +254,7 @@ static void hpet_start_counter(void) static void hpet_restart_counter(void) { hpet_stop_counter(); + hpet_reset_counter(); hpet_start_counter(); } @@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq); static void hpet_set_mode(enum clock_event_mode mode, struct clock_event_device *evt, int timer) { - unsigned long cfg; + unsigned long cfg, cmp, now; uint64_t delta; switch (mode) { @@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode, hpet_stop_counter(); delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult; delta >>= evt->shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; cfg = hpet_readl(HPET_Tn_CFG(timer)); /* Make sure we use edge triggered interrupts */ cfg &= ~HPET_TN_LEVEL; cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; hpet_writel(cfg, HPET_Tn_CFG(timer)); + hpet_writel(cmp, HPET_Tn_CMP(timer)); + udelay(1); + /* + * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL + * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL + * bit is automatically cleared after the first write. + * (See AMD-8111 HyperTransport I/O Hub Data Sheet, + * Publication # 24674) + */ hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer)); hpet_start_counter(); hpet_print_config(); |