x86: remove the Voyager 32-bit subarch

Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

5 files changed, 0 insertions, 687 deletions

diff --git a/arch/x86/include/asm/mach-voyager/do_timer.h b/arch/x86/include/asm/mach-voyager/do_timer.h
deleted file mode 100644
index 9e5a459fd15..00000000000
--- a/arch/x86/include/asm/mach-voyager/do_timer.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/voyager.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-static inline void do_timer_interrupt_hook(void)
-{
-	global_clock_event->event_handler(global_clock_event);
-	voyager_timer_interrupt();
-}
-
diff --git a/arch/x86/include/asm/mach-voyager/entry_arch.h b/arch/x86/include/asm/mach-voyager/entry_arch.h
deleted file mode 100644
index ae52624b593..00000000000
--- a/arch/x86/include/asm/mach-voyager/entry_arch.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Copyright (C) 2002
- *
- * Author: James.Bottomley@HansenPartnership.com
- *
- * linux/arch/i386/voyager/entry_arch.h
- *
- * This file builds the VIC and QIC CPI gates
- */
-
-/* initialise the voyager interrupt gates 
- *
- * This uses the macros in irq.h to set up assembly jump gates.  The
- * calls are then redirected to the same routine with smp_ prefixed */
-BUILD_INTERRUPT(vic_sys_interrupt, VIC_SYS_INT)
-BUILD_INTERRUPT(vic_cmn_interrupt, VIC_CMN_INT)
-BUILD_INTERRUPT(vic_cpi_interrupt, VIC_CPI_LEVEL0);
-
-/* do all the QIC interrupts */
-BUILD_INTERRUPT(qic_timer_interrupt, QIC_TIMER_CPI);
-BUILD_INTERRUPT(qic_invalidate_interrupt, QIC_INVALIDATE_CPI);
-BUILD_INTERRUPT(qic_reschedule_interrupt, QIC_RESCHEDULE_CPI);
-BUILD_INTERRUPT(qic_enable_irq_interrupt, QIC_ENABLE_IRQ_CPI);
-BUILD_INTERRUPT(qic_call_function_interrupt, QIC_CALL_FUNCTION_CPI);
-BUILD_INTERRUPT(qic_call_function_single_interrupt, QIC_CALL_FUNCTION_SINGLE_CPI);
diff --git a/arch/x86/include/asm/mach-voyager/setup_arch.h b/arch/x86/include/asm/mach-voyager/setup_arch.h
deleted file mode 100644
index 71729ca05cd..00000000000
--- a/arch/x86/include/asm/mach-voyager/setup_arch.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <asm/voyager.h>
-#include <asm/setup.h>
-#define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
-			(&boot_params.apm_bios_info))
-
-/* Hook to call BIOS initialisation function */
-
-/* for voyager, pass the voyager BIOS/SUS info area to the detection
- * routines */
-
-#define ARCH_SETUP	voyager_detect(VOYAGER_BIOS_INFO);
-
diff --git a/arch/x86/include/asm/vic.h b/arch/x86/include/asm/vic.h
deleted file mode 100644
index 53100f35361..00000000000
--- a/arch/x86/include/asm/vic.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager Interrupt Controller */
-
-/* The eight CPI vectors.  To activate a CPI, you write a bit mask
- * corresponding to the processor set to be interrupted into the
- * relevant register.  That set of CPUs will then be interrupted with
- * the CPI */
-static const int VIC_CPI_Registers[] =
-	{0xFC00, 0xFC01, 0xFC08, 0xFC09,
-	 0xFC10, 0xFC11, 0xFC18, 0xFC19 };
-
-#define VIC_PROC_WHO_AM_I		0xfc29
-#	define	QUAD_IDENTIFIER		0xC0
-#	define  EIGHT_SLOT_IDENTIFIER	0xE0
-#define QIC_EXTENDED_PROCESSOR_SELECT	0xFC72
-#define VIC_CPI_BASE_REGISTER		0xFC41
-#define VIC_PROCESSOR_ID		0xFC21
-#	define VIC_CPU_MASQUERADE_ENABLE 0x8
-
-#define VIC_CLAIM_REGISTER_0		0xFC38
-#define VIC_CLAIM_REGISTER_1		0xFC39
-#define VIC_REDIRECT_REGISTER_0		0xFC60
-#define VIC_REDIRECT_REGISTER_1		0xFC61
-#define VIC_PRIORITY_REGISTER		0xFC20
-
-#define VIC_PRIMARY_MC_BASE		0xFC48
-#define VIC_SECONDARY_MC_BASE		0xFC49
-
-#define QIC_PROCESSOR_ID		0xFC71
-#	define	QIC_CPUID_ENABLE	0x08
-
-#define QIC_VIC_CPI_BASE_REGISTER	0xFC79
-#define QIC_CPI_BASE_REGISTER		0xFC7A
-
-#define QIC_MASK_REGISTER0		0xFC80
-/* NOTE: these are masked high, enabled low */
-#	define QIC_PERF_TIMER		0x01
-#	define QIC_LPE			0x02
-#	define QIC_SYS_INT		0x04
-#	define QIC_CMN_INT		0x08
-/* at the moment, just enable CMN_INT, disable SYS_INT */
-#	define QIC_DEFAULT_MASK0	(~(QIC_CMN_INT /* | VIC_SYS_INT */))
-#define QIC_MASK_REGISTER1		0xFC81
-#	define QIC_BOOT_CPI_MASK	0xFE
-/* Enable CPI's 1-6 inclusive */
-#	define QIC_CPI_ENABLE		0x81
-
-#define QIC_INTERRUPT_CLEAR0		0xFC8A
-#define QIC_INTERRUPT_CLEAR1		0xFC8B
-
-/* this is where we place the CPI vectors */
-#define VIC_DEFAULT_CPI_BASE		0xC0
-/* this is where we place the QIC CPI vectors */
-#define QIC_DEFAULT_CPI_BASE		0xD0
-
-#define VIC_BOOT_INTERRUPT_MASK		0xfe
-
-extern void smp_vic_timer_interrupt(void);
diff --git a/arch/x86/include/asm/voyager.h b/arch/x86/include/asm/voyager.h
deleted file mode 100644
index c1635d43616..00000000000
--- a/arch/x86/include/asm/voyager.h
+++ /dev/null
@@ -1,571 +0,0 @@
-/* Copyright (C) 1999,2001
- *
- * Author: J.E.J.Bottomley@HansenPartnership.com
- *
- * Standard include definitions for the NCR Voyager system */
-
-#undef	VOYAGER_DEBUG
-#undef	VOYAGER_CAT_DEBUG
-
-#ifdef VOYAGER_DEBUG
-#define VDEBUG(x)	printk x
-#else
-#define VDEBUG(x)
-#endif
-
-/* There are three levels of voyager machine: 3,4 and 5. The rule is
- * if it's less than 3435 it's a Level 3 except for a 3360 which is
- * a level 4.  A 3435 or above is a Level 5 */
-#define VOYAGER_LEVEL5_AND_ABOVE	0x3435
-#define VOYAGER_LEVEL4			0x3360
-
-/* The L4 DINO ASIC */
-#define VOYAGER_DINO			0x43
-
-/* voyager ports in standard I/O space */
-#define VOYAGER_MC_SETUP	0x96
-
-
-#define	VOYAGER_CAT_CONFIG_PORT			0x97
-#	define VOYAGER_CAT_DESELECT		0xff
-#define VOYAGER_SSPB_RELOCATION_PORT		0x98
-
-/* Valid CAT controller commands */
-/* start instruction register cycle */
-#define VOYAGER_CAT_IRCYC			0x01
-/* start data register cycle */
-#define VOYAGER_CAT_DRCYC			0x02
-/* move to execute state */
-#define VOYAGER_CAT_RUN				0x0F
-/* end operation */
-#define VOYAGER_CAT_END				0x80
-/* hold in idle state */
-#define VOYAGER_CAT_HOLD			0x90
-/* single step an "intest" vector */
-#define VOYAGER_CAT_STEP			0xE0
-/* return cat controller to CLEMSON mode */
-#define VOYAGER_CAT_CLEMSON			0xFF
-
-/* the default cat command header */
-#define VOYAGER_CAT_HEADER			0x7F
-
-/* the range of possible CAT module ids in the system */
-#define VOYAGER_MIN_MODULE			0x10
-#define VOYAGER_MAX_MODULE			0x1f
-
-/* The voyager registers per asic */
-#define VOYAGER_ASIC_ID_REG			0x00
-#define VOYAGER_ASIC_TYPE_REG			0x01
-/* the sub address registers can be made auto incrementing on reads */
-#define VOYAGER_AUTO_INC_REG			0x02
-#	define VOYAGER_AUTO_INC			0x04
-#	define VOYAGER_NO_AUTO_INC		0xfb
-#define VOYAGER_SUBADDRDATA			0x03
-#define VOYAGER_SCANPATH			0x05
-#	define VOYAGER_CONNECT_ASIC		0x01
-#	define VOYAGER_DISCONNECT_ASIC		0xfe
-#define VOYAGER_SUBADDRLO			0x06
-#define VOYAGER_SUBADDRHI			0x07
-#define VOYAGER_SUBMODSELECT			0x08
-#define VOYAGER_SUBMODPRESENT			0x09
-
-#define VOYAGER_SUBADDR_LO			0xff
-#define VOYAGER_SUBADDR_HI			0xffff
-
-/* the maximum size of a scan path -- used to form instructions */
-#define VOYAGER_MAX_SCAN_PATH			0x100
-/* the biggest possible register size (in bytes) */
-#define VOYAGER_MAX_REG_SIZE			4
-
-/* Total number of possible modules (including submodules) */
-#define VOYAGER_MAX_MODULES			16
-/* Largest number of asics per module */
-#define VOYAGER_MAX_ASICS_PER_MODULE		7
-
-/* the CAT asic of each module is always the first one */
-#define VOYAGER_CAT_ID				0
-#define VOYAGER_PSI				0x1a
-
-/* voyager instruction operations and registers */
-#define VOYAGER_READ_CONFIG			0x1
-#define VOYAGER_WRITE_CONFIG			0x2
-#define VOYAGER_BYPASS				0xff
-
-typedef struct voyager_asic {
-	__u8	asic_addr;	/* ASIC address; Level 4 */
-	__u8	asic_type;      /* ASIC type */
-	__u8	asic_id;	/* ASIC id */
-	__u8	jtag_id[4];	/* JTAG id */
-	__u8	asic_location;	/* Location within scan path; start w/ 0 */
-	__u8	bit_location;	/* Location within bit stream; start w/ 0 */
-	__u8	ireg_length;	/* Instruction register length */
-	__u16	subaddr;	/* Amount of sub address space */
-	struct voyager_asic *next;	/* Next asic in linked list */
-} voyager_asic_t;
-
-typedef struct voyager_module {
-	__u8	module_addr;		/* Module address */
-	__u8	scan_path_connected;	/* Scan path connected */
-	__u16   ee_size;		/* Size of the EEPROM */
-	__u16   num_asics;		/* Number of Asics */
-	__u16   inst_bits;		/* Instruction bits in the scan path */
-	__u16   largest_reg;		/* Largest register in the scan path */
-	__u16   smallest_reg;		/* Smallest register in the scan path */
-	voyager_asic_t   *asic;		/* First ASIC in scan path (CAT_I) */
-	struct   voyager_module *submodule;	/* Submodule pointer */
-	struct   voyager_module *next;		/* Next module in linked list */
-} voyager_module_t;
-
-typedef struct voyager_eeprom_hdr {
-	 __u8  module_id[4];
-	 __u8  version_id;
-	 __u8  config_id;
-	 __u16 boundry_id;	/* boundary scan id */
-	 __u16 ee_size;		/* size of EEPROM */
-	 __u8  assembly[11];	/* assembly # */
-	 __u8  assembly_rev;	/* assembly rev */
-	 __u8  tracer[4];	/* tracer number */
-	 __u16 assembly_cksum;	/* asm checksum */
-	 __u16 power_consump;	/* pwr requirements */
-	 __u16 num_asics;	/* number of asics */
-	 __u16 bist_time;	/* min. bist time */
-	 __u16 err_log_offset;	/* error log offset */
-	 __u16 scan_path_offset;/* scan path offset */
-	 __u16 cct_offset;
-	 __u16 log_length;	/* length of err log */
-	 __u16 xsum_end;	/* offset to end of
-				   checksum */
-	 __u8  reserved[4];
-	 __u8  sflag;		/* starting sentinal */
-	 __u8  part_number[13];	/* prom part number */
-	 __u8  version[10];	/* version number */
-	 __u8  signature[8];
-	 __u16 eeprom_chksum;
-	 __u32  data_stamp_offset;
-	 __u8  eflag ;		 /* ending sentinal */
-} __attribute__((packed)) voyager_eprom_hdr_t;
-
-
-
-#define VOYAGER_EPROM_SIZE_OFFSET				\
-	((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
-#define VOYAGER_XSUM_END_OFFSET		0x2a
-
-/* the following three definitions are for internal table layouts
- * in the module EPROMs.  We really only care about the IDs and
- * offsets */
-typedef struct voyager_sp_table {
-	__u8 asic_id;
-	__u8 bypass_flag;
-	__u16 asic_data_offset;
-	__u16 config_data_offset;
-} __attribute__((packed)) voyager_sp_table_t;
-
-typedef struct voyager_jtag_table {
-	__u8 icode[4];
-	__u8 runbist[4];
-	__u8 intest[4];
-	__u8 samp_preld[4];
-	__u8 ireg_len;
-} __attribute__((packed)) voyager_jtt_t;
-
-typedef struct voyager_asic_data_table {
-	__u8 jtag_id[4];
-	__u16 length_bsr;
-	__u16 length_bist_reg;
-	__u32 bist_clk;
-	__u16 subaddr_bits;
-	__u16 seed_bits;
-	__u16 sig_bits;
-	__u16 jtag_offset;
-} __attribute__((packed)) voyager_at_t;
-
-/* Voyager Interrupt Controller (VIC) registers */
-
-/* Base to add to Cross Processor Interrupts (CPIs) when triggering
- * the CPU IRQ line */
-/* register defines for the WCBICs (one per processor) */
-#define VOYAGER_WCBIC0	0x41		/* bus A node P1 processor 0 */
-#define VOYAGER_WCBIC1	0x49		/* bus A node P1 processor 1 */
-#define VOYAGER_WCBIC2	0x51		/* bus A node P2 processor 0 */
-#define VOYAGER_WCBIC3	0x59		/* bus A node P2 processor 1 */
-#define VOYAGER_WCBIC4	0x61		/* bus B node P1 processor 0 */
-#define VOYAGER_WCBIC5	0x69		/* bus B node P1 processor 1 */
-#define VOYAGER_WCBIC6	0x71		/* bus B node P2 processor 0 */
-#define VOYAGER_WCBIC7	0x79		/* bus B node P2 processor 1 */
-
-
-/* top of memory registers */
-#define VOYAGER_WCBIC_TOM_L	0x4
-#define VOYAGER_WCBIC_TOM_H	0x5
-
-/* register defines for Voyager Memory Contol (VMC)
- * these are present on L4 machines only */
-#define	VOYAGER_VMC1		0x81
-#define VOYAGER_VMC2		0x91
-#define VOYAGER_VMC3		0xa1
-#define VOYAGER_VMC4		0xb1
-
-/* VMC Ports */
-#define VOYAGER_VMC_MEMORY_SETUP	0x9
-#	define VMC_Interleaving		0x01
-#	define VMC_4Way			0x02
-#	define VMC_EvenCacheLines	0x04
-#	define VMC_HighLine		0x08
-#	define VMC_Start0_Enable	0x20
-#	define VMC_Start1_Enable	0x40
-#	define VMC_Vremap		0x80
-#define VOYAGER_VMC_BANK_DENSITY	0xa
-#	define	VMC_BANK_EMPTY		0
-#	define	VMC_BANK_4MB		1
-#	define	VMC_BANK_16MB		2
-#	define	VMC_BANK_64MB		3
-#	define	VMC_BANK0_MASK		0x03
-#	define	VMC_BANK1_MASK		0x0C
-#	define	VMC_BANK2_MASK		0x30
-#	define	VMC_BANK3_MASK		0xC0
-
-/* Magellan Memory Controller (MMC) defines - present on L5 */
-#define VOYAGER_MMC_ASIC_ID		1
-/* the two memory modules corresponding to memory cards in the system */
-#define VOYAGER_MMC_MEMORY0_MODULE	0x14
-#define VOYAGER_MMC_MEMORY1_MODULE	0x15
-/* the Magellan Memory Address (MMA) defines */
-#define VOYAGER_MMA_ASIC_ID		2
-
-/* Submodule number for the Quad Baseboard */
-#define VOYAGER_QUAD_BASEBOARD		1
-
-/* ASIC defines for the Quad Baseboard */
-#define VOYAGER_QUAD_QDATA0		1
-#define VOYAGER_QUAD_QDATA1		2
-#define VOYAGER_QUAD_QABC		3
-
-/* Useful areas in extended CMOS */
-#define VOYAGER_PROCESSOR_PRESENT_MASK	0x88a
-#define VOYAGER_MEMORY_CLICKMAP		0xa23
-#define VOYAGER_DUMP_LOCATION		0xb1a
-
-/* SUS In Control bit - used to tell SUS that we don't need to be
- * babysat anymore */
-#define VOYAGER_SUS_IN_CONTROL_PORT	0x3ff
-#	define VOYAGER_IN_CONTROL_FLAG	0x80
-
-/* Voyager PSI defines */
-#define VOYAGER_PSI_STATUS_REG		0x08
-#	define PSI_DC_FAIL		0x01
-#	define PSI_MON			0x02
-#	define PSI_FAULT		0x04
-#	define PSI_ALARM		0x08
-#	define PSI_CURRENT		0x10
-#	define PSI_DVM			0x20
-#	define PSI_PSCFAULT		0x40
-#	define PSI_STAT_CHG		0x80
-
-#define VOYAGER_PSI_SUPPLY_REG		0x8000
-	/* read */
-#	define PSI_FAIL_DC		0x01
-#	define PSI_FAIL_AC		0x02
-#	define PSI_MON_INT		0x04
-#	define PSI_SWITCH_OFF		0x08
-#	define PSI_HX_OFF		0x10
-#	define PSI_SECURITY		0x20
-#	define PSI_CMOS_BATT_LOW	0x40
-#	define PSI_CMOS_BATT_FAIL	0x80
-	/* write */
-#	define PSI_CLR_SWITCH_OFF	0x13
-#	define PSI_CLR_HX_OFF		0x14
-#	define PSI_CLR_CMOS_BATT_FAIL	0x17
-
-#define VOYAGER_PSI_MASK		0x8001
-#	define PSI_MASK_MASK		0x10
-
-#define VOYAGER_PSI_AC_FAIL_REG		0x8004
-#define	AC_FAIL_STAT_CHANGE		0x80
-
-#define VOYAGER_PSI_GENERAL_REG		0x8007
-	/* read */
-#	define PSI_SWITCH_ON		0x01
-#	define PSI_SWITCH_ENABLED	0x02
-#	define PSI_ALARM_ENABLED	0x08
-#	define PSI_SECURE_ENABLED	0x10
-#	define PSI_COLD_RESET		0x20
-#	define PSI_COLD_START		0x80
-	/* write */
-#	define PSI_POWER_DOWN		0x10
-#	define PSI_SWITCH_DISABLE	0x01
-#	define PSI_SWITCH_ENABLE	0x11
-#	define PSI_CLEAR		0x12
-#	define PSI_ALARM_DISABLE	0x03
-#	define PSI_ALARM_ENABLE		0x13
-#	define PSI_CLEAR_COLD_RESET	0x05
-#	define PSI_SET_COLD_RESET	0x15
-#	define PSI_CLEAR_COLD_START	0x07
-#	define PSI_SET_COLD_START	0x17
-
-
-
-struct voyager_bios_info {
-	__u8	len;
-	__u8	major;
-	__u8	minor;
-	__u8	debug;
-	__u8	num_classes;
-	__u8	class_1;
-	__u8	class_2;
-};
-
-/* The following structures and definitions are for the Kernel/SUS
- * interface these are needed to find out how SUS initialised any Quad
- * boards in the system */
-
-#define	NUMBER_OF_MC_BUSSES	2
-#define SLOTS_PER_MC_BUS	8
-#define MAX_CPUS                16      /* 16 way CPU system */
-#define MAX_PROCESSOR_BOARDS	4	/* 4 processor slot system */
-#define MAX_CACHE_LEVELS	4	/* # of cache levels supported */
-#define MAX_SHARED_CPUS		4	/* # of CPUs that can share a LARC */
-#define NUMBER_OF_POS_REGS	8
-
-typedef struct {
-	__u8	MC_Slot;
-	__u8	POS_Values[NUMBER_OF_POS_REGS];
-} __attribute__((packed)) MC_SlotInformation_t;
-
-struct QuadDescription {
-	__u8  Type;	/* for type 0 (DYADIC or MONADIC) all fields
-			 * will be zero except for slot */
-	__u8 StructureVersion;
-	__u32 CPI_BaseAddress;
-	__u32  LARC_BankSize;
-	__u32 LocalMemoryStateBits;
-	__u8  Slot; /* Processor slots 1 - 4 */
-} __attribute__((packed));
-
-struct ProcBoardInfo {
-	__u8 Type;
-	__u8 StructureVersion;
-	__u8 NumberOfBoards;
-	struct QuadDescription QuadData[MAX_PROCESSOR_BOARDS];
-} __attribute__((packed));
-
-struct CacheDescription {
-	__u8 Level;
-	__u32 TotalSize;
-	__u16 LineSize;
-	__u8  Associativity;
-	__u8  CacheType;
-	__u8  WriteType;
-	__u8  Number_CPUs_SharedBy;
-	__u8  Shared_CPUs_Hardware_IDs[MAX_SHARED_CPUS];
-
-} __attribute__((packed));
-
-struct CPU_Description {
-	__u8 CPU_HardwareId;
-	char *FRU_String;
-	__u8 NumberOfCacheLevels;
-	struct CacheDescription CacheLevelData[MAX_CACHE_LEVELS];
-} __attribute__((packed));
-
-struct CPU_Info {
-	__u8 Type;
-	__u8 StructureVersion;
-	__u8 NumberOf_CPUs;
-	struct CPU_Description CPU_Data[MAX_CPUS];
-} __attribute__((packed));
-
-
-/*
- * This structure will be used by SUS and the OS.
- * The assumption about this structure is that no blank space is
- * packed in it by our friend the compiler.
- */
-typedef struct {
-	__u8	Mailbox_SUS;		/* Written to by SUS to give
-					   commands/response to the OS */
-	__u8	Mailbox_OS;		/* Written to by the OS to give
-					   commands/response to SUS */
-	__u8	SUS_MailboxVersion;	/* Tells the OS which iteration of the
-					   interface SUS supports */
-	__u8	OS_MailboxVersion;	/* Tells SUS which iteration of the
-					   interface the OS supports */
-	__u32	OS_Flags;		/* Flags set by the OS as info for
-					   SUS */
-	__u32	SUS_Flags;		/* Flags set by SUS as info
-					   for the OS */
-	__u32	WatchDogPeriod;		/* Watchdog period (in seconds) which
-					   the DP uses to see if the OS
-					   is dead */
-	__u32	WatchDogCount;		/* Updated by the OS on every tic. */
-	__u32	MemoryFor_SUS_ErrorLog;	/* Flat 32 bit address which tells SUS
-					   where to stuff the SUS error log
-					   on a dump */
-	MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS];
-					/* Storage for MCA POS data */
-	/* All new SECOND_PASS_INTERFACE fields added from this point */
-	struct ProcBoardInfo    *BoardData;
-	struct CPU_Info         *CPU_Data;
-	/* All new fields must be added from this point */
-} Voyager_KernelSUS_Mbox_t;
-
-/* structure for finding the right memory address to send a QIC CPI to */
-struct voyager_qic_cpi {
-	/* Each cache line (32 bytes) can trigger a cpi.  The cpi
-	 * read/write may occur anywhere in the cache line---pick the
-	 * middle to be safe */
-	struct  {
-		__u32 pad1[3];
-		__u32 cpi;
-		__u32 pad2[4];
-	} qic_cpi[8];
-};
-
-struct voyager_status {
-	__u32	power_fail:1;
-	__u32	switch_off:1;
-	__u32	request_from_kernel:1;
-};
-
-struct voyager_psi_regs {
-	__u8 cat_id;
-	__u8 cat_dev;
-	__u8 cat_control;
-	__u8 subaddr;
-	__u8 dummy4;
-	__u8 checkbit;
-	__u8 subaddr_low;
-	__u8 subaddr_high;
-	__u8 intstatus;
-	__u8 stat1;
-	__u8 stat3;
-	__u8 fault;
-	__u8 tms;
-	__u8 gen;
-	__u8 sysconf;
-	__u8 dummy15;
-};
-
-struct voyager_psi_subregs {
-	__u8 supply;
-	__u8 mask;
-	__u8 present;
-	__u8 DCfail;
-	__u8 ACfail;
-	__u8 fail;
-	__u8 UPSfail;
-	__u8 genstatus;
-};
-
-struct voyager_psi {
-	struct voyager_psi_regs regs;
-	struct voyager_psi_subregs subregs;
-};
-
-struct voyager_SUS {
-#define	VOYAGER_DUMP_BUTTON_NMI		0x1
-#define VOYAGER_SUS_VALID		0x2
-#define VOYAGER_SYSINT_COMPLETE		0x3
-	__u8	SUS_mbox;
-#define VOYAGER_NO_COMMAND		0x0
-#define VOYAGER_IGNORE_DUMP		0x1
-#define VOYAGER_DO_DUMP			0x2
-#define VOYAGER_SYSINT_HANDSHAKE	0x3
-#define VOYAGER_DO_MEM_DUMP		0x4
-#define VOYAGER_SYSINT_WAS_RECOVERED	0x5
-	__u8	kernel_mbox;
-#define	VOYAGER_MAILBOX_VERSION		0x10
-	__u8	SUS_version;
-	__u8	kernel_version;
-#define VOYAGER_OS_HAS_SYSINT		0x1
-#define VOYAGER_OS_IN_PROGRESS		0x2
-#define VOYAGER_UPDATING_WDPERIOD	0x4
-	__u32	kernel_flags;
-#define VOYAGER_SUS_BOOTING		0x1
-#define VOYAGER_SUS_IN_PROGRESS		0x2
-	__u32	SUS_flags;
-	__u32	watchdog_period;
-	__u32	watchdog_count;
-	__u32	SUS_errorlog;
-	/* lots of system configuration stuff under here */
-};
-
-/* Variables exported by voyager_smp */
-extern __u32 voyager_extended_vic_processors;
-extern __u32 voyager_allowed_boot_processors;
-extern __u32 voyager_quad_processors;
-extern struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS];
-extern struct voyager_SUS *voyager_SUS;
-
-/* variables exported always */
-extern struct task_struct *voyager_thread;
-extern int voyager_level;
-extern struct voyager_status voyager_status;
-
-/* functions exported by the voyager and voyager_smp modules */
-extern int voyager_cat_readb(__u8 module, __u8 asic, int reg);
-extern void voyager_cat_init(void);
-extern void voyager_detect(struct voyager_bios_info *);
-extern void voyager_trap_init(void);
-extern void voyager_setup_irqs(void);
-extern int voyager_memory_detect(int region, __u32 *addr, __u32 *length);
-extern void voyager_smp_intr_init(void);
-extern __u8 voyager_extended_cmos_read(__u16 cmos_address);
-extern void voyager_smp_dump(void);
-extern void voyager_timer_interrupt(void);
-extern void smp_local_timer_interrupt(void);
-extern void voyager_power_off(void);
-extern void smp_voyager_power_off(void *dummy);
-extern void voyager_restart(void);
-extern void voyager_cat_power_off(void);
-extern void voyager_cat_do_common_interrupt(void);
-extern void voyager_handle_nmi(void);
-extern void voyager_smp_intr_init(void);
-/* Commands for the following are */
-#define	VOYAGER_PSI_READ	0
-#define VOYAGER_PSI_WRITE	1
-#define VOYAGER_PSI_SUBREAD	2
-#define VOYAGER_PSI_SUBWRITE	3
-extern void voyager_cat_psi(__u8, __u16, __u8 *);
-
-/* These define the CPIs we use in linux */
-#define VIC_CPI_LEVEL0			0
-#define VIC_CPI_LEVEL1			1
-/* now the fake CPIs */
-#define VIC_TIMER_CPI			2
-#define VIC_INVALIDATE_CPI		3
-#define VIC_RESCHEDULE_CPI		4
-#define VIC_ENABLE_IRQ_CPI		5
-#define VIC_CALL_FUNCTION_CPI		6
-#define VIC_CALL_FUNCTION_SINGLE_CPI	7
-
-/* Now the QIC CPIs:  Since we don't need the two initial levels,
- * these are 2 less than the VIC CPIs */
-#define QIC_CPI_OFFSET			1
-#define QIC_TIMER_CPI			(VIC_TIMER_CPI - QIC_CPI_OFFSET)
-#define QIC_INVALIDATE_CPI		(VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
-#define QIC_RESCHEDULE_CPI		(VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
-#define QIC_ENABLE_IRQ_CPI		(VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_CPI		(VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
-#define QIC_CALL_FUNCTION_SINGLE_CPI	(VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
-
-#define VIC_START_FAKE_CPI		VIC_TIMER_CPI
-#define VIC_END_FAKE_CPI		VIC_CALL_FUNCTION_SINGLE_CPI
-
-/* this is the SYS_INT CPI. */
-#define VIC_SYS_INT			8
-#define VIC_CMN_INT			15
-
-/* This is the boot CPI for alternate processors.  It gets overwritten
- * by the above once the system has activated all available processors */
-#define VIC_CPU_BOOT_CPI		VIC_CPI_LEVEL0
-#define VIC_CPU_BOOT_ERRATA_CPI		(VIC_CPI_LEVEL0 + 8)
-
-extern asmlinkage void vic_cpi_interrupt(void);
-extern asmlinkage void vic_sys_interrupt(void);
-extern asmlinkage void vic_cmn_interrupt(void);
-extern asmlinkage void qic_timer_interrupt(void);
-extern asmlinkage void qic_invalidate_interrupt(void);
-extern asmlinkage void qic_reschedule_interrupt(void);
-extern asmlinkage void qic_enable_irq_interrupt(void);
-extern asmlinkage void qic_call_function_interrupt(void);