Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits)
  x86, boot: add new generated files to the appropriate .gitignore files
  x86, boot: correct the calculation of ZO_INIT_SIZE
  x86-64: align __PHYSICAL_START, remove __KERNEL_ALIGN
  x86, boot: correct sanity checks in boot/compressed/misc.c
  x86: add extension fields for bootloader type and version
  x86, defconfig: update kernel position parameters
  x86, defconfig: update to current, no material changes
  x86: make CONFIG_RELOCATABLE the default
  x86: default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN to 16 MB
  x86: document new bzImage fields
  x86, boot: make kernel_alignment adjustable; new bzImage fields
  x86, boot: remove dead code from boot/compressed/head_*.S
  x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits
  x86, boot: make symbols from the main vmlinux available
  x86, boot: determine compressed code offset at compile time
  x86, boot: use appropriate rep string for move and clear
  x86, boot: zero EFLAGS on 32 bits
  x86, boot: set up the decompression stack as early as possible
  x86, boot: straighten out ranges to copy/zero in compressed/head*.S
  x86, boot: stylistic cleanups for boot/compressed/head_64.S
  ...

Fixed trivial conflict in arch/x86/configs/x86_64_defconfig manually

12 files changed, 364 insertions, 301 deletions

diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore
index 172cf8a98bd..851fe936d24 100644
--- a/arch/x86/boot/.gitignore
+++ b/arch/x86/boot/.gitignore
@@ -3,6 +3,8 @@ bzImage
 cpustr.h
 mkcpustr
 offsets.h
+voffset.h
+zoffset.h
 setup
 setup.bin
 setup.elf
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 6633b6e7505..619d297aa2b 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -86,19 +86,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 
 SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
 
-sed-offsets := -e 's/^00*/0/' \
-        -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
 
-quiet_cmd_offsets = OFFSETS $@
-      cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+      cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
 
-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+	$(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+      cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,zoffset)
 
-targets += offsets.h
 
 AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
 
 LDFLAGS_setup.elf	:= -T
 $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 63eff3b04d0..4a46fab7162 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -1,3 +1,6 @@
 relocs
 vmlinux.bin.all
 vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 65551c9f857..49c8a4c37d7 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -19,7 +19,9 @@ KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
 LDFLAGS := -m elf_$(UTS_MACHINE)
 LDFLAGS_vmlinux := -T
 
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y	:= mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
@@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 
 
 targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
 
 quiet_cmd_relocs = RELOCS  $@
       cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
 	$(call if_changed,relocs)
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD   $@
-      cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
-	$(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
 
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
 
-else
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+      cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
 
-suffix_$(CONFIG_KERNEL_GZIP)  = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA)  = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
-	$(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+	$(call if_changed,mkpiggy)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 3a8a866fb2e..75e4f001e70 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -12,16 +12,16 @@
  * the page directory. [According to comments etc elsewhere on a compressed
  * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
  *
- * Page 0 is deliberately kept safe, since System Management Mode code in 
+ * Page 0 is deliberately kept safe, since System Management Mode code in
  * laptops may need to access the BIOS data stored there.  This is also
- * useful for future device drivers that either access the BIOS via VM86 
+ * useful for future device drivers that either access the BIOS via VM86
  * mode.
  */
 
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.text
+	.text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -29,161 +29,151 @@
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head","ax",@progbits
+	.section ".text.head","ax",@progbits
 ENTRY(startup_32)
 	cld
-	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-	 * us to not reload segments */
-	testb $(1<<6), BP_loadflags(%esi)
-	jnz 1f
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
+	testb	$(1<<6), BP_loadflags(%esi)
+	jnz	1f
 
 	cli
-	movl $(__BOOT_DS),%eax
-	movl %eax,%ds
-	movl %eax,%es
-	movl %eax,%fs
-	movl %eax,%gs
-	movl %eax,%ss
+	movl	$__BOOT_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %fs
+	movl	%eax, %gs
+	movl	%eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-	leal (0x1e4+4)(%esi), %esp
-	call 1f
-1:	popl %ebp
-	subl $1b, %ebp
+	leal	(BP_scratch+4)(%esi), %esp
+	call	1f
+1:	popl	%ebp
+	subl	$1b, %ebp
 
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
-	movl 	%ebp, %ebx
-	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
-	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+	movl	%ebp, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl    %eax, %ebx
+	notl	%eax
+	andl    %eax, %ebx
 #else
-	movl $LOAD_PHYSICAL_ADDR, %ebx
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	subl input_len(%ebp), %ebx
-	movl output_len(%ebp), %eax
-	addl %eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl $12, %eax
-	addl %eax, %ebx
-	/* Add 32K + 18 bytes of extra slack */
-	addl $(32768 + 18), %ebx
-	/* Align on a 4K boundary */
-	addl $4095, %ebx
-	andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
+
+	/* Set up the stack */
+	leal	boot_stack_end(%ebx), %esp
+
+	/* Zero EFLAGS */
+	pushl	$0
+	popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	pushl %esi
-	leal _end(%ebp), %esi
-	leal _end(%ebx), %edi
-	movl $(_end - startup_32), %ecx
+	pushl	%esi
+	leal	(_bss-4)(%ebp), %esi
+	leal	(_bss-4)(%ebx), %edi
+	movl	$(_bss - startup_32), %ecx
+	shrl	$2, %ecx
 	std
-	rep
-	movsb
+	rep	movsl
 	cld
-	popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
-	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
-	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
-	movl	$LOAD_PHYSICAL_ADDR, %ebp
-#endif
+	popl	%esi
 
 /*
  * Jump to the relocated address.
  */
-	leal relocated(%ebx), %eax
-	jmp *%eax
+	leal	relocated(%ebx), %eax
+	jmp	*%eax
 ENDPROC(startup_32)
 
-.section ".text"
+	.text
 relocated:
 
 /*
- * Clear BSS
- */
-	xorl %eax,%eax
-	leal _edata(%ebx),%edi
-	leal _end(%ebx), %ecx
-	subl %edi,%ecx
-	cld
-	rep
-	stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
  */
-	leal boot_stack_end(%ebx), %esp
+	xorl	%eax, %eax
+	leal	_bss(%ebx), %edi
+	leal	_ebss(%ebx), %ecx
+	subl	%edi, %ecx
+	shrl	$2, %ecx
+	rep	stosl
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	movl output_len(%ebx), %eax
-	pushl %eax
-			# push arguments for decompress_kernel:
-	pushl %ebp	# output address
-	movl input_len(%ebx), %eax
-	pushl %eax	# input_len
-	leal input_data(%ebx), %eax
-	pushl %eax	# input_data
-	leal boot_heap(%ebx), %eax
-	pushl %eax	# heap area
-	pushl %esi	# real mode pointer
-	call decompress_kernel
-	addl $20, %esp
-	popl %ecx
+	leal	z_extract_offset_negative(%ebx), %ebp
+				/* push arguments for decompress_kernel: */
+	pushl	%ebp		/* output address */
+	pushl	$z_input_len	/* input_len */
+	leal	input_data(%ebx), %eax
+	pushl	%eax		/* input_data */
+	leal	boot_heap(%ebx), %eax
+	pushl	%eax		/* heap area */
+	pushl	%esi		/* real mode pointer */
+	call	decompress_kernel
+	addl	$20, %esp
 
 #if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
  */
-	movl %ebp, %edi
-	addl %ecx, %edi
+	leal	z_output_len(%ebp), %edi
 
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
  * and where it was actually loaded.
  */
-	movl %ebp, %ebx
-	subl $LOAD_PHYSICAL_ADDR, %ebx
-	jz   2f		/* Nothing to be done if loaded at compiled addr. */
+	movl	%ebp, %ebx
+	subl	$LOAD_PHYSICAL_ADDR, %ebx
+	jz	2f	/* Nothing to be done if loaded at compiled addr. */
 /*
  * Process relocations.
  */
 
-1:	subl $4, %edi
-	movl 0(%edi), %ecx
-	testl %ecx, %ecx
-	jz 2f
-	addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
-	jmp 1b
+1:	subl	$4, %edi
+	movl	(%edi), %ecx
+	testl	%ecx, %ecx
+	jz	2f
+	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
+	jmp	1b
 2:
 #endif
 
 /*
  * Jump to the decompressed kernel.
  */
-	xorl %ebx,%ebx
-	jmp *%ebp
+	xorl	%ebx, %ebx
+	jmp	*%ebp
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
 boot_heap:
 	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index ed4a8294800..f62c284db9e 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -21,8 +21,8 @@
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.code32
-.text
+	.code32
+	.text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -33,12 +33,14 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head"
+	.section ".text.head"
 	.code32
 ENTRY(startup_32)
 	cld
-	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-	 * us to not reload segments */
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
 	testb $(1<<6), BP_loadflags(%esi)
 	jnz 1f
 
@@ -49,14 +51,15 @@ ENTRY(startup_32)
 	movl	%eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-	leal	(0x1e4+4)(%esi), %esp
+	leal	(BP_scratch+4)(%esi), %esp
 	call	1f
 1:	popl	%ebp
 	subl	$1b, %ebp
@@ -70,32 +73,28 @@ ENTRY(startup_32)
 	testl	%eax, %eax
 	jnz	no_longmode
 
-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
  * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
 	movl	%ebp, %ebx
-	addl	$(PMD_PAGE_SIZE -1), %ebx
-	andl	$PMD_PAGE_MASK, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl	%eax, %ebx
+	notl	%eax
+	andl	%eax, %ebx
 #else
-	movl	$CONFIG_PHYSICAL_START, %ebx
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	subl	input_len(%ebp), %ebx
-	movl	output_len(%ebp), %eax
-	addl	%eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl	$12, %eax
-	addl	%eax, %ebx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addl	$(32768 + 18 + 4095), %ebx
-	andl	$~4095, %ebx
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
 
 /*
  * Prepare for entering 64 bit mode
@@ -114,7 +113,7 @@ ENTRY(startup_32)
  /*
   * Build early 4G boot pagetable
   */
-	/* Initialize Page tables to 0*/
+	/* Initialize Page tables to 0 */
 	leal	pgtable(%ebx), %edi
 	xorl	%eax, %eax
 	movl	$((4096*6)/4), %ecx
@@ -155,7 +154,8 @@ ENTRY(startup_32)
 	btsl	$_EFER_LME, %eax
 	wrmsr
 
-	/* Setup for the jump to 64bit mode
+	/*
+	 * Setup for the jump to 64bit mode
 	 *
 	 * When the jump is performend we will be in long mode but
 	 * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
@@ -184,7 +184,8 @@ no_longmode:
 
 #include "../../kernel/verify_cpu_64.S"
 
-	/* Be careful here startup_64 needs to be at a predictable
+	/*
+	 * Be careful here startup_64 needs to be at a predictable
 	 * address so I can export it in an ELF header.  Bootloaders
 	 * should look at the ELF header to find this address, as
 	 * it may change in the future.
@@ -192,7 +193,8 @@ no_longmode:
 	.code64
 	.org 0x200
 ENTRY(startup_64)
-	/* We come here either from startup_32 or directly from a
+	/*
+	 * We come here either from startup_32 or directly from a
 	 * 64bit bootloader.  If we come here from a bootloader we depend on
 	 * an identity mapped page table being provied that maps our
 	 * entire text+data+bss and hopefully all of memory.
@@ -209,50 +211,54 @@ ENTRY(startup_64)
 	movl    $0x20, %eax
 	ltr	%ax
 
-	/* Compute the decompressed kernel start address.  It is where
+	/*
+	 * Compute the decompressed kernel start address.  It is where
 	 * we were loaded at aligned to a 2M boundary. %rbp contains the
 	 * decompressed kernel start address.
 	 *
 	 * If it is a relocatable kernel then decompress and run the kernel
 	 * from load address aligned to 2MB addr, otherwise decompress and
-	 * run the kernel from CONFIG_PHYSICAL_START
+	 * run the kernel from LOAD_PHYSICAL_ADDR
+	 *
+	 * We cannot rely on the calculation done in 32-bit mode, since we
+	 * may have been invoked via the 64-bit entry point.
 	 */
 
 	/* Start with the delta to where the kernel will run at. */
 #ifdef CONFIG_RELOCATABLE
 	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
-	addq	$(PMD_PAGE_SIZE - 1), %rbp
-	andq	$PMD_PAGE_MASK, %rbp
-	movq	%rbp, %rbx
+	movl	BP_kernel_alignment(%rsi), %eax
+	decl	%eax
+	addq	%rax, %rbp
+	notq	%rax
+	andq	%rax, %rbp
 #else
-	movq	$CONFIG_PHYSICAL_START, %rbp
-	movq	%rbp, %rbx
+	movq	$LOAD_PHYSICAL_ADDR, %rbp
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	movl	input_len(%rip), %eax
-	subq	%rax, %rbx
-	movl	output_len(%rip), %eax
-	addq	%rax, %rbx
-	/* Add 8 bytes for every 32K input block */
-	shrq	$12, %rax
-	addq	%rax, %rbx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addq	$(32768 + 18 + 4095), %rbx
-	andq	$~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+	/* Target address to relocate to for decompression */
+	leaq	z_extract_offset(%rbp), %rbx
+
+	/* Set up the stack */
+	leaq	boot_stack_end(%rbx), %rsp
+
+	/* Zero EFLAGS */
+	pushq	$0
+	popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	leaq	_end_before_pgt(%rip), %r8
-	leaq	_end_before_pgt(%rbx), %r9
-	movq	$_end_before_pgt /* - $startup_32 */, %rcx
-1:	subq	$8, %r8
-	subq	$8, %r9
-	movq	0(%r8), %rax
-	movq	%rax, 0(%r9)
-	subq	$8, %rcx
-	jnz	1b
+	pushq	%rsi
+	leaq	(_bss-8)(%rip), %rsi
+	leaq	(_bss-8)(%rbx), %rdi
+	movq	$_bss /* - $startup_32 */, %rcx
+	shrq	$3, %rcx
+	std
+	rep	movsq
+	cld
+	popq	%rsi
 
 /*
  * Jump to the relocated address.
@@ -260,37 +266,28 @@ ENTRY(startup_64)
 	leaq	relocated(%rbx), %rax
 	jmp	*%rax
 
-.section ".text"
+	.text
 relocated:
 
 /*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
  */
-	xorq	%rax, %rax
-	leaq    _edata(%rbx), %rdi
-	leaq    _end_before_pgt(%rbx), %rcx
+	xorl	%eax, %eax
+	leaq    _bss(%rip), %rdi
+	leaq    _ebss(%rip), %rcx
 	subq	%rdi, %rcx
-	cld
-	rep
-	stosb
-
-	/* Setup the stack */
-	leaq	boot_stack_end(%rip), %rsp
-
-	/* zero EFLAGS after setting rsp */
-	pushq	$0
-	popfq
+	shrq	$3, %rcx
+	rep	stosq
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	pushq	%rsi			# Save the real mode argument
-	movq	%rsi, %rdi		# real mode address
-	leaq	boot_heap(%rip), %rsi	# malloc area for uncompression
-	leaq	input_data(%rip), %rdx  # input_data
-	movl	input_len(%rip), %eax
-	movq	%rax, %rcx		# input_len
-	movq	%rbp, %r8		# output
+	pushq	%rsi			/* Save the real mode argument */
+	movq	%rsi, %rdi		/* real mode address */
+	leaq	boot_heap(%rip), %rsi	/* malloc area for uncompression */
+	leaq	input_data(%rip), %rdx  /* input_data */
+	movl	$z_input_len, %ecx	/* input_len */
+	movq	%rbp, %r8		/* output target address */
 	call	decompress_kernel
 	popq	%rsi
 
@@ -311,11 +308,21 @@ gdt:
 	.quad   0x0000000000000000	/* TS continued */
 gdt_end:
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
 boot_heap:
 	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:
 	.fill BOOT_STACK_SIZE, 1, 0
 boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+	.section ".pgtable","a",@nobits
+	.balign 4096
+pgtable:
+	.fill 6*4096, 1, 0
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index e45be73684f..842b2a36174 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 
+	if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+		error("Destination address inappropriately aligned");
 #ifdef CONFIG_X86_64
-	if ((unsigned long)output & (__KERNEL_ALIGN - 1))
-		error("Destination address not 2M aligned");
-	if ((unsigned long)output >= 0xffffffffffUL)
+	if (heap > 0x3fffffffffffUL)
 		error("Destination address too large");
 #else
-	if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
-		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
 	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
+#endif
 #ifndef CONFIG_RELOCATABLE
-	if ((u32)output != LOAD_PHYSICAL_ADDR)
+	if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
 		error("Wrong destination address");
 #endif
-#endif
 
 	if (!quiet)
 		putstr("\nDecompressing Linux... ");
diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c
new file mode 100644
index 00000000000..bcbd36c4143
--- /dev/null
+++ b/arch/x86/boot/compressed/mkpiggy.c
@@ -0,0 +1,97 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *  Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License version
+ *  2 as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ *
+ *  H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+	const uint8_t *cp = p;
+
+	return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+		((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+	uint32_t olen;
+	long ilen;
+	unsigned long offs;
+	FILE *f;
+
+	if (argc < 2) {
+		fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+		return 1;
+	}
+
+	/* Get the information for the compressed kernel image first */
+
+	f = fopen(argv[1], "r");
+	if (!f) {
+		perror(argv[1]);
+		return 1;
+	}
+
+
+	if (fseek(f, -4L, SEEK_END)) {
+		perror(argv[1]);
+	}
+	fread(&olen, sizeof olen, 1, f);
+	ilen = ftell(f);
+	olen = getle32(&olen);
+	fclose(f);
+
+	/*
+	 * Now we have the input (compressed) and output (uncompressed)
+	 * sizes, compute the necessary decompression offset...
+	 */
+
+	offs = (olen > ilen) ? olen - ilen : 0;
+	offs += olen >> 12;	/* Add 8 bytes for each 32K block */
+	offs += 32*1024 + 18;	/* Add 32K + 18 bytes slack */
+	offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+	printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+	printf(".globl z_input_len\n");
+	printf("z_input_len = %lu\n", ilen);
+	printf(".globl z_output_len\n");
+	printf("z_output_len = %lu\n", (unsigned long)olen);
+	printf(".globl z_extract_offset\n");
+	printf("z_extract_offset = 0x%lx\n", offs);
+	/* z_extract_offset_negative allows simplification of head_32.S */
+	printf(".globl z_extract_offset_negative\n");
+	printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+	printf(".globl input_data, input_data_end\n");
+	printf("input_data:\n");
+	printf(".incbin \"%s\"\n", argv[1]);
+	printf("input_data_end:\n");
+
+	return 0;
+}
diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S
index bef1ac891bc..cc353e1b3ff 100644
--- a/arch/x86/boot/compressed/vmlinux_64.lds
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,6 +1,17 @@
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
 OUTPUT_ARCH(i386:x86-64)
 ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
 SECTIONS
 {
 	/* Be careful parts of head_64.S assume startup_32 is at
@@ -33,16 +44,22 @@ SECTIONS
 		*(.data.*)
 		_edata = . ;
 	}
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
 	.bss : {
 		_bss = . ;
 		*(.bss)
 		*(.bss.*)
 		*(COMMON)
-		. = ALIGN(8);
-		_end_before_pgt = . ;
-		. = ALIGN(4096);
-		pgtable = . ;
-		. = . + 4096 * 6;
+		. = ALIGN(8);	/* For convenience during zeroing */
 		_ebss = .;
 	}
+#ifdef CONFIG_X86_64
+       . = ALIGN(PAGE_SIZE);
+       .pgtable : {
+		_pgtable = . ;
+		*(.pgtable)
+		_epgtable = . ;
+	}
+#endif
+	_end = .;
 }
diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr
deleted file mode 100644
index f02382ae5c4..00000000000
--- a/arch/x86/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,10 +0,0 @@
-SECTIONS
-{
-  .rodata.compressed : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .;
-	*(.data)
-	output_len = . - 4;
-	input_data_end = .;
-	}
-}
diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds
deleted file mode 100644
index bb3c48379c4..00000000000
--- a/arch/x86/boot/compressed/vmlinux_32.lds
+++ /dev/null
@@ -1,43 +0,0 @@
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
-	/* Be careful parts of head_32.S assume startup_32 is at
-	 * address 0.
-	 */
-	. = 0;
-	.text.head : {
-		_head = . ;
-		*(.text.head)
-		_ehead = . ;
-	}
-	.rodata.compressed : {
-		*(.rodata.compressed)
-	}
-	.text :	{
-		_text = .; 	/* Text */
-		*(.text)
-		*(.text.*)
-		_etext = . ;
-	}
-	.rodata : {
-		_rodata = . ;
-		*(.rodata)	 /* read-only data */
-		*(.rodata.*)
-		_erodata = . ;
-	}
-	.data :	{
-		_data = . ;
-		*(.data)
-		*(.data.*)
-		_edata = . ;
-	}
-	.bss : {
-		_bss = . ;
-		*(.bss)
-		*(.bss.*)
-		*(COMMON)
-		_end = . ;
-	}
-}
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 5d84d1c74e4..1040f6e8010 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,7 +22,8 @@
 #include <asm/page_types.h>
 #include <asm/setup.h>
 #include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"
 
 BOOTSEG		= 0x07C0		/* original address of boot-sector */
 SYSSEG		= 0x1000		/* historical load address >> 4 */
@@ -115,7 +116,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0209		# header version number (>= 0x0105)
+		.word	0x020a		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@@ -168,7 +169,11 @@ heap_end_ptr:	.word	_end+STACK_SIZE-512
 					# end of setup code can be used by setup
 					# for local heap purposes.
 
-pad1:		.word	0
+ext_loader_ver:
+		.byte	0		# Extended boot loader version
+ext_loader_type:
+		.byte	0		# Extended boot loader type
+
 cmd_line_ptr:	.long	0		# (Header version 0x0202 or later)
 					# If nonzero, a 32-bit pointer
 					# to the kernel command line.
@@ -200,7 +205,7 @@ relocatable_kernel:    .byte 1
 #else
 relocatable_kernel:    .byte 0
 #endif
-pad2:			.byte 0
+min_alignment:		.byte MIN_KERNEL_ALIGN_LG2	# minimum alignment
 pad3:			.word 0
 
 cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
@@ -212,13 +217,24 @@ hardware_subarch:	.long 0			# subarchitecture, added with 2.07
 
 hardware_subarch_data:	.quad 0
 
-payload_offset:		.long input_data
-payload_length:		.long input_data_end-input_data
+payload_offset:		.long ZO_input_data
+payload_length:		.long ZO_z_input_len
 
 setup_data:		.quad 0			# 64-bit physical pointer to
 						# single linked list of
 						# struct setup_data
 
+pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
+
+#define ZO_INIT_SIZE	(ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE	(VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size:		.long INIT_SIZE		# kernel initialization size
+
 # End of setup header #####################################################
 
 	.section ".inittext", "ax"