remove the v850 port

Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.

There also seems to be noone willing to bring this port back into a usable
state.

This patch therefore removes the v850 port.

If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

56 files changed, 0 insertions, 8634 deletions

diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
deleted file mode 100644
index da5889c5357..00000000000
--- a/arch/v850/kernel/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# arch/v850/kernel/Makefile
-#
-#  Copyright (C) 2001,02,03  NEC Electronics Corporation
-#  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
-	 signal.o irq.o mach.o ptrace.o bug.o
-obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
-# chip-specific code
-obj-$(CONFIG_V850E_MA1)		+= ma.o
-obj-$(CONFIG_V850E_ME2)		+= me2.o
-obj-$(CONFIG_V850E_TEG)		+= teg.o
-obj-$(CONFIG_V850E_AS85EP1)	+= as85ep1.o
-obj-$(CONFIG_V850E2_ANNA)	+= anna.o
-# platform-specific code
-obj-$(CONFIG_V850E_SIM)		+= sim.o simcons.o
-obj-$(CONFIG_V850E2_SIM85E2)	+= sim85e2.o memcons.o
-obj-$(CONFIG_V850E2_FPGA85E2C)	+= fpga85e2c.o memcons.o
-obj-$(CONFIG_RTE_CB)		+= rte_cb.o rte_cb_leds.o
-obj-$(CONFIG_RTE_CB_MA1)	+= rte_ma1_cb.o
-obj-$(CONFIG_RTE_CB_ME2)	+= rte_me2_cb.o
-obj-$(CONFIG_RTE_CB_NB85E)	+= rte_nb85e_cb.o
-obj-$(CONFIG_RTE_CB_MULTI)	+= rte_cb_multi.o
-obj-$(CONFIG_RTE_MB_A_PCI)	+= rte_mb_a_pci.o
-obj-$(CONFIG_RTE_GBUS_INT)	+= gbus_int.o
-# feature-specific code
-obj-$(CONFIG_V850E_INTC)	+= v850e_intc.o
-obj-$(CONFIG_V850E_TIMER_D)	+= v850e_timer_d.o v850e_utils.o
-obj-$(CONFIG_V850E_CACHE)	+= v850e_cache.o
-obj-$(CONFIG_V850E2_CACHE)	+= v850e2_cache.o
-obj-$(CONFIG_V850E_HIGHRES_TIMER) += highres_timer.o
-obj-$(CONFIG_PROC_FS)		+= procfs.o
diff --git a/arch/v850/kernel/anna-rom.ld b/arch/v850/kernel/anna-rom.ld
deleted file mode 100644
index 7c54e7e3f1b..00000000000
--- a/arch/v850/kernel/anna-rom.ld
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 8MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00800000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25170f..00000000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
-	ANNA_ILBEN    = 0;
-
-	V850E2_CSC(0) = 0x402F;
-	V850E2_CSC(1) = 0x4000;
-	V850E2_BPC    = 0;
-	V850E2_BSC    = 0xAAAA;
-	V850E2_BEC    = 0;
-
-#if 0
-	V850E2_BHC    = 0xFFFF;	/* icache all memory, dcache all */
-#else
-	V850E2_BHC    = 0;	/* cache no memory */
-#endif
-	V850E2_BCT(0) = 0xB088;
-	V850E2_BCT(1) = 0x0008;
-	V850E2_DWC(0) = 0x0027;
-	V850E2_DWC(1) = 0;
-	V850E2_BCC    = 0x0006;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0x0089;
-	V850E2_SCR(3) = 0x21A9;
-	V850E2_RFS(3) = 0x8121;
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	ANNA_PORT_PM (LEDS_PORT) = 0;	/* Make all LED pins output pins.  */
-	mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "PIN", IRQ_INTP(0),   IRQ_INTP_NUM,   1, 4 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "DMXER", IRQ_INTDMXER,1,		1, 2 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	ANNA_PORT_IO(LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* The Anna connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P07
-	   and P37 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
-		ANNA_PORT_PM(3) |=  0x80; /* P37 in input mode */
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  We can't use the last bit because it's used for
-   UART0's CTS output.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-				pos += dir;
-				set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/anna.ld b/arch/v850/kernel/anna.ld
deleted file mode 100644
index df7f80f2833..00000000000
--- a/arch/v850/kernel/anna.ld
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA).  */
-
-MEMORY {
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00040000
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM1 : ORIGIN = 0x00040000, LENGTH = 0x00040000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > iMEM0
-	.sram : { RAMK_KRAM_CONTENTS } > SRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/as85ep1-rom.ld b/arch/v850/kernel/as85ep1-rom.ld
deleted file mode 100644
index fe2a9a3ab52..00000000000
--- a/arch/v850/kernel/as85ep1-rom.ld
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 4MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00400000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jumper JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
deleted file mode 100644
index b525ecf3aea..00000000000
--- a/arch/v850/kernel/as85ep1.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	4
-
-
-static void as85ep1_led_tick (void);
-
-extern char _intv_copy_src_start, _intv_copy_src_end;
-extern char _intv_copy_dst_start;
-
-
-void __init mach_early_init (void)
-{
-#ifndef CONFIG_ROM_KERNEL
-	const u32 *src;
-	register u32 *dst asm ("ep");
-#endif
-
-	AS85EP1_CSC(0) = 0x0403;
-	AS85EP1_BCT(0) = 0xB8B8;
-	AS85EP1_DWC(0) = 0x0104;
-	AS85EP1_BCC    = 0x0012;
-	AS85EP1_ASC    = 0;
-	AS85EP1_LBS    = 0x00A9;
-
-	AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
-	AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
-	AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
-	AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
-
-	AS85EP1_RFS(1) = 0x800c;
-	AS85EP1_RFS(3) = 0x800c;
-	AS85EP1_SCR(1) = 0x20A9;
-	AS85EP1_SCR(3) = 0x20A9;
-
-#ifndef CONFIG_ROM_KERNEL
-	/* The early chip we have is buggy, and writing the interrupt
-	   vectors into low RAM may screw up, so for non-ROM kernels, we
-	   only rely on the reset vector being downloaded, and copy the
-	   rest of the interrupt vectors into place here.  The specific bug
-	   is that writing address N, where (N & 0x10) == 0x10, will _also_
-	   write to address (N - 0x10).  We avoid this (effectively) by
-	   writing in 16-byte chunks backwards from the end.  */
-
-	AS85EP1_IRAMM = 0x3;	/* "write-mode" for the internal instruction memory */
-
-	src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
-	dst = (u32 *)&_intv_copy_dst_start
-		+ (src - (u32 *)&_intv_copy_src_start);
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst -= 4;
-		src -= 4;
-	} while (src > (u32 *)&_intv_copy_src_start);
-
-	AS85EP1_IRAMM = 0x0;	/* "read-mode" for the internal instruction memory */
-#endif /* !CONFIG_ROM_KERNEL */
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
-	AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins.  */
-	mach_tick = as85ep1_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-/* Convenience macros.  */
-#define SRAM_END	(SRAM_ADDR + SRAM_SIZE)
-#define SDRAM_END	(SDRAM_ADDR + SDRAM_SIZE)
-
-void __init mach_reserve_bootmem ()
-{
-	if (SDRAM_ADDR < RAM_END && SDRAM_ADDR > RAM_START)
-		/* We can't use the space between SRAM and SDRAM, so
-		   prevent the kernel from trying.  */
-		reserve_bootmem(SRAM_END, SDRAM_ADDR - SRAM_END,
-				BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	AS85EP1_PORT_IO (LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Make the shared uart/port pins be uart pins.  */
-	AS85EP1_PORT_PMC(3) |= (0x5 << chan);
-
-	/* The AS85EP1 connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P53
-	   and P54 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		/* Put P53 & P54 in I/O port mode.  */
-		AS85EP1_PORT_PMC(5) &= ~0x18;
-		/* Make P53 an output, and P54 an input.  */
-		AS85EP1_PORT_PM(5) |=  0x10;
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 7
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void as85ep1_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-				pos += dir;
-				clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644
index ef2c4399063..00000000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-	/* 1MB of internal instruction memory. */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00100000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jump JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.resetv : {
-		__intv_start = . ;
-			*(.intv.reset)	/* Reset vector */
-	} > iMEM0
-
-	.sram : {
-		RAMK_KRAM_CONTENTS
-
-		/* We stick most of the interrupt vectors here; they'll be
-		   copied into the proper location by the early init code (we
-		   can't put them directly in the right place because of
-		   hardware bugs).  The vectors shouldn't need to be
-		   relocated, so we don't have to use `> ...  AT> ...' to
-		   split the load/vm addresses (and we can't because of
-		   problems with the loader).  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_start = . ;
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_end = . ;
-	} > SRAM
-
-	/* Where we end up putting the vectors.  */
-	__intv_copy_dst_start = 0x10 ;
-	__intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-	__intv_end = __intv_copy_dst_end ;
-
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/asm-offsets.c b/arch/v850/kernel/asm-offsets.c
deleted file mode 100644
index 581e6986a77..00000000000
--- a/arch/v850/kernel/asm-offsets.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-int main (void)
-{
-	/* offsets into the task struct */
-	DEFINE (TASK_STATE, offsetof (struct task_struct, state));
-	DEFINE (TASK_FLAGS, offsetof (struct task_struct, flags));
-	DEFINE (TASK_PTRACE, offsetof (struct task_struct, ptrace));
-	DEFINE (TASK_BLOCKED, offsetof (struct task_struct, blocked));
-	DEFINE (TASK_THREAD, offsetof (struct task_struct, thread));
-	DEFINE (TASK_THREAD_INFO, offsetof (struct task_struct, stack));