Merge branch 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

* 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  pci root complex: support for tile architecture
  drivers/net/tile/: on-chip network drivers for the tile architecture
  MAINTAINERS: add drivers/char/hvc_tile.c as maintained by tile

9 files changed, 4126 insertions, 187 deletions

diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index c5741da4eea..14a3f8556ac 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size)
 	mb_incoherent();
 }
 
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+	char *p;
+	int i;
+
+	/*
+	 * Flush and invalidate the buffer out of the local L1/L2
+	 * and request the home cache to flush and invalidate as well.
+	 */
+	__finv_buffer(buffer, size);
+
+	/*
+	 * Wait for the home cache to acknowledge that it has processed
+	 * all the flush-and-invalidate requests.  This does not mean
+	 * that the flushed data has reached the memory controller yet,
+	 * but it does mean the home cache is processing the flushes.
+	 */
+	__insn_mf();
+
+	/*
+	 * Issue a load to the last cache line, which can't complete
+	 * until all the previously-issued flushes to the same memory
+	 * controller have also completed.  If we weren't striping
+	 * memory, that one load would be sufficient, but since we may
+	 * be, we also need to back up to the last load issued to
+	 * another memory controller, which would be the point where
+	 * we crossed an 8KB boundary (the granularity of striping
+	 * across memory controllers).  Keep backing up and doing this
+	 * until we are before the beginning of the buffer, or have
+	 * hit all the controllers.
+	 */
+	for (i = 0, p = (char *)buffer + size - 1;
+	     i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+	     ++i) {
+		const unsigned long STRIPE_WIDTH = 8192;
+
+		/* Force a load instruction to issue. */
+		*(volatile char *)p;
+
+		/* Jump to end of previous stripe. */
+		p -= STRIPE_WIDTH;
+		p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+	}
+
+	/* Wait for the loads (and thus flushes) to have completed. */
+	__insn_mf();
+}
+
 #endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index ee43328713a..d3cbb9b14cb 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
 #define ioremap_writethrough(physaddr, size)	ioremap(physaddr, size)
 #define ioremap_fullcache(physaddr, size)	ioremap(physaddr, size)
 
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
 #define mmiowb()
 
 /* Conversion between virtual and physical mappings.  */
@@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
  * we never run, uses them unconditionally.
  */
 
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
 {
 	panic("inb/outb and friends do not exist on tile");
 	return 0;
 }
 
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+	return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+	ioport_panic();
+}
+
 static inline u8 inb(unsigned long addr)
 {
 	return ioport_panic();
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
deleted file mode 100644
index e853b0e2793..00000000000
--- a/arch/tile/include/asm/pci-bridge.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
-			      unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-	int index;		/* PCI domain number */
-	struct pci_bus *root_bus;
-
-	int first_busno;
-	int last_busno;
-
-	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
-	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
-
-	struct pci_ops *ops;
-
-	int irq_base;		/* Base IRQ from the Hypervisor	*/
-	int plx_gen1;		/* flag for PLX Gen 1 configuration */
-
-	/* Address ranges that are routed to this controller/bridge. */
-	struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
-			       void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
-			       u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- *   The following code swizzles for exactly one bridge.  The routine
- *   common_swizzle below handles multiple bridges.  But there are a
- *   some boards that don't follow the PCI spec's suggestion so we
- *   break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
-		unsigned char idsel)
-{
-	return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
-	long _ctl_ = -1; \
-	if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
-		_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
-	_ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index b0c15da2d5d..c3fc458a0d3 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,7 +15,29 @@
 #ifndef _ASM_TILE_PCI_H
 #define _ASM_TILE_PCI_H
 
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;		/* PCI domain number */
+	struct pci_bus *root_bus;
+
+	int first_busno;
+	int last_busno;
+
+	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
+	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
+
+	struct pci_ops *ops;
+
+	int irq_base;		/* Base IRQ from the Hypervisor	*/
+	int plx_gen1;		/* flag for PLX Gen 1 configuration */
+
+	/* Address ranges that are routed to this controller/bridge. */
+	struct resource mem_resources[3];
+};
 
 /*
  * The hypervisor maps the entirety of CPA-space as bus addresses, so
@@ -24,56 +46,12 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
 int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
-int __devinit _tile_cfg_read(struct pci_controller *hose,
-				    int bus,
-				    int slot,
-				    int function,
-				    int offset,
-				    int size,
-				    u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
-				     int bus,
-				     int slot,
-				     int function,
-				     int offset,
-				     int size,
-				     u32 val);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
 
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
-	_tile_cfg_read(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-#define early_cfg_write(where, size, value) \
-	_tile_cfg_write(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-
-
-#define PCICFG_BYTE	1
-#define PCICFG_WORD	2
-#define PCICFG_DWORD	4
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
 #define	TILE_NUM_PCIE	2
 
@@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 
 /*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
  */
+static inline int pcibios_assign_all_busses(void)
+{
+	return 1;
+}
 
-#define TILE_PCIE_LOWER_IO		0x0
-#define TILE_PCIE_UPPER_IO		0x10000
-#define TILE_PCIE_PCIE_IO_SIZE		0x0000FFFF
-
-#define _PAGE_NO_CACHE		0
-#define _PAGE_GUARDED		0
-
-
-#define pcibios_assign_all_busses()    pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
-	/* No special bus mastering setup handling */
 }
 
 #define PCIBIOS_MIN_MEM		0
-#define PCIBIOS_MIN_IO		TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO		0
 
 /*
  * This flag tells if the platform is TILEmpower that needs
  * special configuration for the PLX switch chip.
  */
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
@@ -122,7 +100,4 @@ extern int blade_pci;
 /* generic pci stuff */
 #include <asm-generic/pci.h>
 
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
 #endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 1747ff3946b..a9e7c876033 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -292,8 +292,18 @@ extern int kstack_hash;
 /* Are we using huge pages in the TLB for kernel data? */
 extern int kdata_huge;
 
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
 #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
 
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
 #else /* __ASSEMBLY__ */
 
 /* Do some slow action (e.g. read a slow SPR). */
diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h
new file mode 100644
index 00000000000..3a73b2b4491
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_impl.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM      8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM        10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL      128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1)       /**< Small packet queue. */
+#define SIZE_LARGE (2)       /**< Large packet queue. */
+#define SIZE_JUMBO (0)       /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers.  These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT      24      /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE       (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed.  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean.  All
+ * pointers move left to right.
+ *
+ * @code
+ *   I   I   V   V   V   V   I   I   I   I
+ *   0   1   2   3   4   5   6   7   8   9  10
+ *           ^       ^       ^               ^
+ *           |               |               |
+ *           |               |               __last_packet_plus_one
+ *           |               __buffer_write
+ *           __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10).  The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5.  The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+  /** Byte offset of the next notify packet to be written: zero for the first
+   *  packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+   *  queue, etc. */
+  volatile uint32_t __packet_write;
+
+  /** Offset of the packet after the last valid packet (i.e., when any
+   *  pointer is incremented to this value, it wraps back to zero). */
+  uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP.  (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.)  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request.  When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses.  This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue.  Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets.  (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean.  Remember:
+ * all pointers move right to left.
+ *
+ *   V   V   V   I   I   R   R   V   V   V
+ *   0   1   2   3   4   5   6   7   8   9
+ *           ^       ^       ^           ^
+ *           |       |       |           |
+ *           |       |       |           __last_buffer
+ *           |       |       __buffer_write
+ *           |       __buffer_requested_write
+ *           __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7.  The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive.  Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+  /** Ordinal number of the next buffer to be written: 0 for the first slot in
+   *  the queue, 1 for the second slot in the queue, etc. */
+  volatile uint32_t __buffer_write;
+
+  /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+   *  below zero, it is reloaded with this value). */
+  uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+  /** The queue of packets waiting to be received. */
+  __netio_packet_queue_t __packet_receive_queue;
+  /** The intr bit mask that IDs this device. */
+  unsigned int __intr_id;
+  /** Offset to queues of empty buffers, one per size. */
+  uint32_t __buffer_queue[NETIO_NUM_SIZES];
+  /** The address of the first EPP tile, or -1 if no EPP. */
+  /* ISSUE: Actually this is always "0" or "~0". */
+  uint32_t __epp_location;
+  /** The queue ID that this queue represents. */
+  unsigned int __queue_id;
+  /** Number of acknowledgements received. */
+  volatile uint32_t __acks_received;
+  /** Last completion number received for packet_sendv. */
+  volatile uint32_t __last_completion_rcv;
+  /** Number of packets allowed to be outstanding. */
+  uint32_t __max_outstanding;
+  /** First VA available for packets. */
+  void* __va_0;
+  /** First VA in second range available for packets. */
+  void* __va_1;
+  /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+  uint32_t __padding[3];
+  /** The packets themselves. */
+  netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+  /** The next incoming packet to be read. */
+  uint32_t __packet_receive_read;
+  /** The next empty buffers to be read, one index per size. */
+  uint8_t __buffer_read[NETIO_NUM_SIZES];
+  /** Where the empty buffer we next request from the IPP will go, one index
+   * per size. */
+  uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+  /** PCIe interface flag. */
+  uint8_t __pcie;
+  /** Number of packets left to be received before we send a credit update. */
+  uint32_t __receive_credit_remaining;
+  /** Value placed in __receive_credit_remaining when it reaches zero. */
+  uint32_t __receive_credit_interval;
+  /** First fast I/O routine index. */
+  uint32_t __fastio_index;
+  /** Number of acknowledgements expected. */
+  uint32_t __acks_outstanding;
+  /** Last completion number requested. */
+  uint32_t __last_completion_req;
+  /** File descriptor for driver. */
+  int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE   64   /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE  64   /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor.  FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+  uint16_t flags;              /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+  uint16_t transfer_size;      /**< Size of packet */
+  uint32_t va;                 /**< VA of start of packet */
+  __netio_pkt_handle_t handle; /**< Packet handle */
+  uint32_t csum0;              /**< First checksum word */
+  uint32_t csum1;              /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ *  - As the "flags" member in the __netio_send_cmd_t, above; used only
+ *    for netio_pkt_send_{prepare,commit}.
+ *  - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet.  Note that some code in the
+ *  normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK    0x1
+
+/** Do checksum on this packet.  (Only used with the __netio_send_cmd_t;
+ *  normal packet sends use a special fast I/O index to denote checksumming,
+ *  and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM   0x2
+
+/** Get a completion on this packet.  Only used with multi-segment sends.  */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+    Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
new file mode 100644
index 00000000000..146e47d5334
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -0,0 +1,615 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+  /** The physical address of the memory. */
+  HV_PhysAddr pa;
+  /** Page table entry for the memory.  This is only used to derive the
+   *  memory's caching mode; the PA bits are ignored. */
+  HV_PTE pte;
+  /** The virtual address of the memory. */
+  HV_VirtAddr va;
+  /** Size (in bytes) of the memory area. */
+  int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+  /** Inform the Linux driver of the address of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA address. */
+  NETIO_FIXED_ADDR               = 0x5000000000000000ULL,
+
+  /** Inform the Linux driver of the size of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA size. */
+  NETIO_FIXED_SIZE               = 0x5100000000000000ULL,
+
+  /** Register current tile with IPP.  Write then read: write, takes a
+   *  netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+  NETIO_IPP_INPUT_REGISTER_OFF   = 0x6000000000000000ULL,
+
+  /** Unregister current tile from IPP.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+  /** Start packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_INIT_OFF       = 0x6200000000000000ULL,
+
+  /** Stop packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNINIT_OFF     = 0x6300000000000000ULL,
+
+  /** Configure group (typically we group on VLAN).  Write-only: takes an
+   *  array of netio_group_t's, low 24 bits of the offset is the base group
+   *  number times the size of a netio_group_t. */
+  NETIO_IPP_INPUT_GROUP_CFG_OFF  = 0x6400000000000000ULL,
+
+  /** Configure bucket.  Write-only: takes an array of netio_bucket_t's, low
+   *  24 bits of the offset is the base bucket number times the size of a
+   *  netio_bucket_t. */
+  NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+  /** Get/set a parameter.  Read or write: read or write data is the parameter
+   *  value, low 32 bits of the offset is a __netio_getset_offset_t. */
+  NETIO_IPP_PARAM_OFF            = 0x6600000000000000ULL,
+
+  /** Get fast I/O index.  Read-only; returns a 4-byte base index value. */
+  NETIO_IPP_GET_FASTIO_OFF       = 0x6700000000000000ULL,
+
+  /** Configure hijack IP address.  Packets with this IPv4 dest address
+   *  go to bucket NETIO_NUM_BUCKETS - 1.  Write-only: takes an IP address
+   *  in some standard form.  FIXME: Define the form! */
+  NETIO_IPP_INPUT_HIJACK_CFG_OFF  = 0x6800000000000000ULL,
+
+  /**
+   * Offsets beyond this point are reserved for the supervisor (although that
+   * enforcement must be done by the supervisor driver itself).
+   */
+  NETIO_IPP_USER_MAX_OFF         = 0x6FFFFFFFFFFFFFFFULL,
+
+  /** Register I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_REGISTER_OFF   = 0x7000000000000000ULL,
+
+  /** Unregister I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+  /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+   * userspace code due to limitations in the pread/pwrite syscalls. */
+
+  /** Drain LIPP buffers. */
+  NETIO_IPP_DRAIN_OFF              = 0xFA00000000000000ULL,
+
+  /** Supply a netio_ipp_address_t to be used as shared memory for the
+   *  LEPP command queue. */
+  NETIO_EPP_SHM_OFF              = 0xFB00000000000000ULL,
+
+  /* 0xFC... is currently unused. */
+
+  /** Stop IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_STOP_SHIM_OFF        = 0xFD00000000000000ULL,
+
+  /** Start IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_START_SHIM_OFF       = 0xFE00000000000000ULL,
+
+  /** Supply packet arena.  Write-only, takes an array of
+    * netio_ipp_address_t values. */
+  NETIO_IPP_ADDRESS_OFF          = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off)    ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off)   ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+  struct
+  {
+    uint64_t addr:48;        /**< Class-specific address */
+    unsigned int class:8;    /**< Class (e.g., NETIO_PARAM) */
+    unsigned int opcode:8;   /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+  }
+  bits;                      /**< Bitfields */
+  uint64_t word;             /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+  NETIO_FASTIO_ALLOCATE         = 0, /**< Get empty packet buffer */
+  NETIO_FASTIO_FREE_BUFFER      = 1, /**< Give buffer back to IPP */
+  NETIO_FASTIO_RETURN_CREDITS   = 2, /**< Give credits to IPP */
+  NETIO_FASTIO_SEND_PKT_NOCK    = 3, /**< Send a packet, no checksum */
+  NETIO_FASTIO_SEND_PKT_CK      = 4, /**< Send a packet, with checksum */
+  NETIO_FASTIO_SEND_PKT_VEC     = 5, /**< Send a vector of packets */
+  NETIO_FASTIO_SENDV_PKT        = 6, /**< Sendv one packet */
+  NETIO_FASTIO_NUM_INDEX        = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+  int err;            /**< Error code. */
+  uint32_t val0;      /**< Value.  Meaning depends upon the specific call. */
+  uint32_t val1;      /**< Value.  Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+                                       uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+                    uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_inde