sh: Kill off dead boards.

None of these have been maintained in years, and no one seems to
be interested in doing so, so just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

32 files changed, 4 insertions, 2435 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c7e3596dcde..ddf2cc56868 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -89,12 +89,6 @@ config SH_7751_SYSTEMH
 	  Select SystemH if you are configuring for a Renesas SystemH
 	  7751R evaluation board.
 
-config SH_STB1_HARP
-	bool "STB1_Harp"
-
-config SH_STB1_OVERDRIVE
-	bool "STB1_Overdrive"
-
 config SH_HP6XX
 	bool "HP6XX"
 	help
@@ -102,19 +96,6 @@ config SH_HP6XX
 	  More information (hardware only) at
 	  <http://www.hp.com/jornada/>.
 
-config SH_CQREEK
-	bool "CqREEK"
-	help
-	  Select CqREEK if configuring for a CqREEK SH7708 or SH7750.
-	  More information at
-	  <http://sources.redhat.com/ecos/hardware.html#SuperH>.
-
-config SH_DMIDA
-	bool "DMIDA"
-	help
-	  Select DMIDA if configuring for a DataMyte 4000 Industrial
-	  Digital Assistant. More information at <http://www.dmida.com/>.
-
 config SH_EC3104
 	bool "EC3104"
 	help
@@ -136,25 +117,9 @@ config SH_DREAMCAST
 	  <http://www.m17n.org/linux-sh/dreamcast/>.  There is a
 	  Dreamcast project is at <http://linuxdc.sourceforge.net/>.
 
-config SH_CAT68701
-	bool "CAT68701"
-
 config SH_BIGSUR
 	bool "BigSur"
 
-config SH_SH2000
-	bool "SH2000"
-	select CPU_SUBTYPE_SH7709
-	help
-	  SH-2000 is a single-board computer based around SH7709A chip
-	  intended for embedded applications.
-	  It has an Ethernet interface (CS8900A), direct connected
-	  Compact Flash socket, three serial ports and PC-104 bus.
-	  More information at <http://sh2000.sh-linux.org>.
-
-config SH_ADX
-	bool "ADX"
-
 config SH_MPC1211
 	bool "Interface MPC1211"
 	help
@@ -246,7 +211,7 @@ source "arch/sh/mm/Kconfig"
 
 config CF_ENABLER
 	bool "Compact Flash Enabler support"
-	depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03
+	depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
 	---help---
 	  Compact Flash is a small, removable mass storage device introduced
 	  in 1994 originally as a PCMCIA device.  If you say `Y' here, you
@@ -274,7 +239,7 @@ config CF_AREA5
 	  - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
 	  - "Area6" if it is connected to Area 6 (0x18000000)
 
-	  "Area6" will work for most boards. For ADX, select "Area5".
+	  "Area6" will work for most boards.
 
 config CF_AREA6
 	bool "Area6"
@@ -418,8 +383,8 @@ source "arch/sh/cchips/Kconfig"
 
 config HEARTBEAT
 	bool "Heartbeat LED"
-	depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || \
-		   SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || \
+	depends on SH_MPC1211 || SH_SH03 || \
+		   SH_BIGSUR || \
 		   SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \
 		   SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \
 		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 8ad0a286ff8..d0168844c3c 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -90,18 +90,11 @@ machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
-machdir-$(CONFIG_SH_STB1_HARP)			:= harp
-machdir-$(CONFIG_SH_STB1_OVERDRIVE)		:= overdrive
 machdir-$(CONFIG_SH_HP6XX)			:= hp6xx
-machdir-$(CONFIG_SH_CQREEK)			:= cqreek
-machdir-$(CONFIG_SH_DMIDA)			:= dmida
 machdir-$(CONFIG_SH_EC3104)			:= ec3104
 machdir-$(CONFIG_SH_SATURN)			:= saturn
 machdir-$(CONFIG_SH_DREAMCAST)			:= dreamcast
-machdir-$(CONFIG_SH_CAT68701)			:= cat68701
 machdir-$(CONFIG_SH_BIGSUR)			:= bigsur
-machdir-$(CONFIG_SH_SH2000)			:= sh2000
-machdir-$(CONFIG_SH_ADX)			:= adx
 machdir-$(CONFIG_SH_MPC1211)			:= mpc1211
 machdir-$(CONFIG_SH_SH03)			:= sh03
 machdir-$(CONFIG_SH_SECUREEDGE5410)		:= snapgear
diff --git a/arch/sh/boards/adx/Makefile b/arch/sh/boards/adx/Makefile
deleted file mode 100644
index 5b1c531b399..00000000000
--- a/arch/sh/boards/adx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for ADX boards
-#
-
-obj-y	 := setup.o irq.o irq_maskreq.o
-
diff --git a/arch/sh/boards/adx/irq.c b/arch/sh/boards/adx/irq.c
deleted file mode 100644
index c6ca409dff9..00000000000
--- a/arch/sh/boards/adx/irq.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/sh/boards/adx/irq.c
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * I/O routine and setup routines for A&D ADX Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/irq.h>
-
-void init_adx_IRQ(void)
-{
-        int i;
-
-/*      printk("init_adx_IRQ()\n");*/
-        /* setup irq_mask_register */
-        irq_mask_register = (unsigned short *)0xa6000008;
-
-        /* cover all external interrupt area by maskreg_irq_type
-         * (Actually, irq15 doesn't exist)
-         */
-        for (i = 0; i < 16; i++) {
-                make_maskreg_irq(i);
-                disable_irq(i);
-        }
-}
diff --git a/arch/sh/boards/adx/irq_maskreg.c b/arch/sh/boards/adx/irq_maskreg.c
deleted file mode 100644
index 4b2abe5eb16..00000000000
--- a/arch/sh/boards/adx/irq_maskreg.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/sh/kernel/irq_maskreg.c
- *
- * Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp>
- *
- * This file may be copied or modified under the terms of the GNU
- * General Public License.  See linux/COPYING for more information.
- *
- * Interrupt handling for Simple external interrupt mask register
- *
- * This is for the machine which have single 16 bit register
- * for masking external IRQ individually.
- * Each bit of the register is for masking each interrupt.  
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-unsigned short *irq_mask_register = 0;
-
-/* forward declaration */
-static unsigned int startup_maskreg_irq(unsigned int irq);
-static void shutdown_maskreg_irq(unsigned int irq);
-static void enable_maskreg_irq(unsigned int irq);
-static void disable_maskreg_irq(unsigned int irq);
-static void mask_and_ack_maskreg(unsigned int);
-static void end_maskreg_irq(unsigned int irq);
-
-/* hw_interrupt_type */
-static struct hw_interrupt_type maskreg_irq_type = {
-	.typename = " Mask Register",
-	.startup = startup_maskreg_irq,
-	.shutdown = shutdown_maskreg_irq,
-	.enable = enable_maskreg_irq,
-	.disable = disable_maskreg_irq,
-	.ack = mask_and_ack_maskreg,
-	.end = end_maskreg_irq
-};
-
-/* actual implementatin */
-static unsigned int startup_maskreg_irq(unsigned int irq)
-{ 
-	enable_maskreg_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_maskreg_irq(unsigned int irq)
-{
-	disable_maskreg_irq(irq);
-}
-
-static void disable_maskreg_irq(unsigned int irq)
-{
-	if (irq_mask_register) {
-		unsigned long flags;
-		unsigned short val, mask = 0x01 << irq;
-
-		/* Set "irq"th bit */
-		local_irq_save(flags);
-		val = ctrl_inw((unsigned long)irq_mask_register);
-		val |= mask;
-		ctrl_outw(val, (unsigned long)irq_mask_register);
-		local_irq_restore(flags);
-	}
-}
-
-static void enable_maskreg_irq(unsigned int irq)
-{
-	if (irq_mask_register) {
-		unsigned long flags;
-		unsigned short val, mask = ~(0x01 << irq);
-
-		/* Clear "irq"th bit */
-		local_irq_save(flags);
-		val = ctrl_inw((unsigned long)irq_mask_register);
-		val &= mask;
-		ctrl_outw(val, (unsigned long)irq_mask_register);
-		local_irq_restore(flags);
-	}
-}
-
-static void mask_and_ack_maskreg(unsigned int irq)
-{
-	disable_maskreg_irq(irq);
-}
-
-static void end_maskreg_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_maskreg_irq(irq);
-}
-
-void make_maskreg_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &maskreg_irq_type;
-	disable_maskreg_irq(irq);
-}
diff --git a/arch/sh/boards/adx/setup.c b/arch/sh/boards/adx/setup.c
deleted file mode 100644
index 4938d959234..00000000000
--- a/arch/sh/boards/adx/setup.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* 
- * linux/arch/sh/board/adx/setup.c
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * I/O routine and setup routines for A&D ADX Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/machvec.h>
-#include <linux/module.h>
-
-extern void init_adx_IRQ(void);
-extern void *cf_io_base;
-
-const char *get_system_type(void)
-{
-	return "A&D ADX";
-}
-
-unsigned long adx_isa_port2addr(unsigned long offset)
-{
-	/* CompactFlash (IDE) */
-	if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset == 0x3f6)) {
-		return (unsigned long)cf_io_base + offset;
-	}
-
-	/* eth0 */
-	if ((offset >= 0x300) && (offset <= 0x30f)) {
-		return 0xa5000000 + offset;	/* COMM BOARD (AREA1) */
-	}
-
-	return offset + 0xb0000000; /* IOBUS (AREA 4)*/
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_adx __initmv = {
-	.mv_nr_irqs		= 48,
-	.mv_isa_port2addr	= adx_isa_port2addr,
-	.mv_init_irq		= init_adx_IRQ,
-};
-ALIAS_MV(adx)
-
-int __init platform_setup(void)
-{
-	/* Nothing to see here .. */
-	return 0;
-}
-
diff --git a/arch/sh/boards/cat68701/Makefile b/arch/sh/boards/cat68701/Makefile
deleted file mode 100644
index 52c1de0a6df..00000000000
--- a/arch/sh/boards/cat68701/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the CAT-68701 specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o
-
diff --git a/arch/sh/boards/cat68701/irq.c b/arch/sh/boards/cat68701/irq.c
deleted file mode 100644
index f9a6d185fb8..00000000000
--- a/arch/sh/boards/cat68701/irq.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/arch/sh/boards/cat68701/irq.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *               2001  Yutaro Ebihara
- *
- * Setup routines for A-ONE Corp CAT-68701 SH7708 Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/irq.h>
-
-int cat68701_irq_demux(int irq)
-{
-        if(irq==13) return 14;
-        if(irq==7)  return 10;
-        return irq;
-}
-
-void init_cat68701_IRQ()
-{
-        make_imask_irq(10);
-        make_imask_irq(14);
-}
diff --git a/arch/sh/boards/cat68701/setup.c b/arch/sh/boards/cat68701/setup.c
deleted file mode 100644
index 90e5175df22..00000000000
--- a/arch/sh/boards/cat68701/setup.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* 
- * linux/arch/sh/boards/cat68701/setup.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *               2001  Yutaro Ebihara
- *
- * Setup routines for A-ONE Corp CAT-68701 SH7708 Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/io.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-const char *get_system_type(void)
-{
-	return "CAT-68701";
-}
-
-#ifdef CONFIG_HEARTBEAT
-void heartbeat_cat68701()
-{
-        static unsigned int cnt = 0, period = 0 , bit = 0;
-        cnt += 1;
-        if (cnt < period) {
-                return;
-        }
-        cnt = 0;
-
-        /* Go through the points (roughly!):
-         * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-         */
-        period = 110 - ( (300<<FSHIFT)/
-                         ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if(bit){ bit=0; }else{ bit=1; }
-	outw(bit<<15,0x3fe);
-}
-#endif /* CONFIG_HEARTBEAT */
-
-unsigned long cat68701_isa_port2addr(unsigned long offset)
-{
-	/* CompactFlash (IDE) */
-	if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset==0x3f6))
-		return 0xba000000 + offset;
-
-	/* INPUT PORT */
-	if ((offset >= 0x3fc) && (offset <= 0x3fd))
-		return 0xb4007000 + offset;
-
-	/* OUTPUT PORT */
-	if ((offset >= 0x3fe) && (offset <= 0x3ff))
-		return 0xb4007400 + offset;
-
-	return offset + 0xb4000000; /* other I/O (EREA 5)*/
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_cat68701 __initmv = {
-	.mv_nr_irqs		= 32,
-	.mv_isa_port2addr	= cat68701_isa_port2addr,
-	.mv_irq_demux		= cat68701_irq_demux,
-
-	.mv_init_irq		= init_cat68701_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_cat68701,
-#endif
-};
-ALIAS_MV(cat68701)
-
-int __init platform_setup(void)
-{
-	/* dummy read erea5 (CS8900A) */
-}
-
diff --git a/arch/sh/boards/cqreek/Makefile b/arch/sh/boards/cqreek/Makefile
deleted file mode 100644
index 1a788a85eba..00000000000
--- a/arch/sh/boards/cqreek/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the CqREEK specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o
-
diff --git a/arch/sh/boards/cqreek/irq.c b/arch/sh/boards/cqreek/irq.c
deleted file mode 100644
index 2955adc5231..00000000000
--- a/arch/sh/boards/cqreek/irq.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* $Id: irq.c,v 1.1.2.4 2002/11/04 20:33:56 lethal Exp $
- *
- * arch/sh/boards/cqreek/irq.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *
- * CqREEK IDE/ISA Bridge Support.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-
-#include <asm/cqreek/cqreek.h>
-#include <asm/io.h>
-#include <asm/io_generic.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/rtc.h>
-
-struct cqreek_irq_data {
-	unsigned short mask_port;	/* Port of Interrupt Mask Register */
-	unsigned short stat_port;	/* Port of Interrupt Status Register */
-	unsigned short bit;		/* Value of the bit */
-};
-static struct cqreek_irq_data cqreek_irq_data[NR_IRQS];
-
-static void disable_cqreek_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned short mask;
-	unsigned short mask_port = cqreek_irq_data[irq].mask_port;
-	unsigned short bit = cqreek_irq_data[irq].bit;
-
-	local_irq_save(flags);
-	/* Disable IRQ */
-	mask = inw(mask_port) & ~bit;
-	outw_p(mask, mask_port);
-	local_irq_restore(flags);
-}
-
-static void enable_cqreek_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned short mask;
-	unsigned short mask_port = cqreek_irq_data[irq].mask_port;
-	unsigned short bit = cqreek_irq_data[irq].bit;
-
-	local_irq_save(flags);
-	/* Enable IRQ */
-	mask = inw(mask_port) | bit;
-	outw_p(mask, mask_port);
-	local_irq_restore(flags);
-}
-
-static void mask_and_ack_cqreek(unsigned int irq)
-{
-	unsigned short stat_port = cqreek_irq_data[irq].stat_port;
-	unsigned short bit = cqreek_irq_data[irq].bit;
-
-	disable_cqreek_irq(irq);
-	/* Clear IRQ (it might be edge IRQ) */
-	inw(stat_port);
-	outw_p(bit, stat_port);
-}
-
-static void end_cqreek_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cqreek_irq(irq);
-}
-
-static unsigned int startup_cqreek_irq(unsigned int irq)
-{ 
-	enable_cqreek_irq(irq);
-	return 0;
-}
-
-static void shutdown_cqreek_irq(unsigned int irq)
-{
-	disable_cqreek_irq(irq);
-}
-
-static struct hw_interrupt_type cqreek_irq_type = {
-	.typename = "CqREEK-IRQ",
-	.startup = startup_cqreek_irq,
-	.shutdown = shutdown_cqreek_irq,
-	.enable = enable_cqreek_irq,
-	.disable = disable_cqreek_irq,
-	.ack = mask_and_ack_cqreek,
-	.end = end_cqreek_irq
-};
-
-int cqreek_has_ide, cqreek_has_isa;
-
-/* XXX: This is just for test for my NE2000 ISA board
-   What we really need is virtualized IRQ and demultiplexer like HP600 port */
-void __init init_cqreek_IRQ(void)
-{
-	if (cqreek_has_ide) {
-		cqreek_irq_data[14].mask_port = BRIDGE_IDE_INTR_MASK;
-		cqreek_irq_data[14].stat_port = BRIDGE_IDE_INTR_STAT;
-		cqreek_irq_data[14].bit = 1;
-
-		irq_desc[14].chip = &cqreek_irq_type;
-		irq_desc[14].status = IRQ_DISABLED;
-		irq_desc[14].action = 0;
-		irq_desc[14].depth = 1;
-
-		disable_cqreek_irq(14);
-	}
-
-	if (cqreek_has_isa) {
-		cqreek_irq_data[10].mask_port = BRIDGE_ISA_INTR_MASK;
-		cqreek_irq_data[10].stat_port = BRIDGE_ISA_INTR_STAT;
-		cqreek_irq_data[10].bit = (1 << 10);
-
-		/* XXX: Err... we may need demultiplexer for ISA irq... */
-		irq_desc[10].chip = &cqreek_irq_type;
-		irq_desc[10].status = IRQ_DISABLED;
-		irq_desc[10].action = 0;
-		irq_desc[10].depth = 1;
-
-		disable_cqreek_irq(10);
-	}
-}
-
diff --git a/arch/sh/boards/cqreek/setup.c b/arch/sh/boards/cqreek/setup.c
deleted file mode 100644
index eff4ed93599..00000000000
--- a/arch/sh/boards/cqreek/setup.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* $Id: setup.c,v 1.5 2003/08/04 01:51:58 lethal Exp $
- *
- * arch/sh/kernel/setup_cqreek.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- *
- * CqREEK IDE/ISA Bridge Support.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach/cqreek.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/io_generic.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-
-#define IDE_OFFSET 0xA4000000UL
-#define ISA_OFFSET 0xA4A00000UL
-
-const char *get_system_type(void)
-{
-	return "CqREEK";
-}
-
-static unsigned long cqreek_port2addr(unsigned long port)
-{
-	if (0x0000<=port && port<=0x0040)
-		return IDE_OFFSET + port;
-	if ((0x01f0<=port && port<=0x01f7) || port == 0x03f6)
-		return IDE_OFFSET + port;
-
-	return ISA_OFFSET + port;
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_cqreek __initmv = {
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#endif
-
-	.mv_init_irq		= init_cqreek_IRQ,
-
-	.mv_isa_port2addr	= cqreek_port2addr,
-};
-ALIAS_MV(cqreek)
-
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
-{
-	int i;
-/* udelay is not available at setup time yet... */
-#define DELAY() do {for (i=0; i<10000; i++) ctrl_inw(0xa0000000);} while(0)
-
-	if ((inw (BRIDGE_FEATURE) & 1)) { /* We have IDE interface */
-		outw_p(0, BRIDGE_IDE_INTR_LVL);
-		outw_p(0, BRIDGE_IDE_INTR_MASK);
-
-		outw_p(0, BRIDGE_IDE_CTRL);
-		DELAY();
-
-		outw_p(0x8000, BRIDGE_IDE_CTRL);
-		DELAY();
-
-		outw_p(0xffff, BRIDGE_IDE_INTR_STAT); /* Clear interrupt status */
-		outw_p(0x0f-14, BRIDGE_IDE_INTR_LVL); /* Use 14 IPR */
-		outw_p(1, BRIDGE_IDE_INTR_MASK); /* Enable interrupt */
-		cqreek_has_ide=1;
-	}
-
-	if ((inw (BRIDGE_FEATURE) & 2)) { /* We have ISA interface */
-		outw_p(0, BRIDGE_ISA_INTR_LVL);
-		outw_p(0, BRIDGE_ISA_INTR_MASK);
-
-		outw_p(0, BRIDGE_ISA_CTRL);
-		DELAY();
-		outw_p(0x8000, BRIDGE_ISA_CTRL);
-		DELAY();
-
-		outw_p(0xffff, BRIDGE_ISA_INTR_STAT); /* Clear interrupt status */
-		outw_p(0x0f-10, BRIDGE_ISA_INTR_LVL); /* Use 10 IPR */
-		outw_p(0xfff8, BRIDGE_ISA_INTR_MASK); /* Enable interrupt */
-		cqreek_has_isa=1;
-	}
-
-	printk(KERN_INFO "CqREEK Setup (IDE=%d, ISA=%d)...done\n", cqreek_has_ide, cqreek_has_isa);
-}
-
diff --git a/arch/sh/boards/dmida/Makefile b/arch/sh/boards/dmida/Makefile
deleted file mode 100644
index 75999aa0a2d..00000000000
--- a/arch/sh/boards/dmida/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the DataMyte Industrial Digital Assistant(tm) specific parts
-# of the kernel
-#
-
-obj-y	 := mach.o
-
diff --git a/arch/sh/boards/dmida/mach.c b/arch/sh/boards/dmida/mach.c
deleted file mode 100644
index d03a25f989c..00000000000
--- a/arch/sh/boards/dmida/mach.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/arch/sh/boards/dmida/mach.c
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * Derived from mach_hp600.c, which bore the message:
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine vector for the DataMyte Industrial Digital Assistant(tm).
- * See http://www.dmida.com
- *
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/irq.h>
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_dmida __initmv = {
-	.mv_nr_irqs		= HD64465_IRQ_BASE+HD64465_IRQ_NUM,
-
-	.mv_inb			= hd64465_inb,
-	.mv_inw			= hd64465_inw,
-	.mv_inl			= hd64465_inl,
-	.mv_outb		= hd64465_outb,
-	.mv_outw		= hd64465_outw,
-	.mv_outl		= hd64465_outl,
-
-	.mv_inb_p		= hd64465_inb_p,
-	.mv_inw_p		= hd64465_inw,
-	.mv_inl_p		= hd64465_inl,
-	.mv_outb_p		= hd64465_outb_p,
-	.mv_outw_p		= hd64465_outw,
-	.mv_outl_p		= hd64465_outl,
-
-	.mv_insb		= hd64465_insb,
-	.mv_insw		= hd64465_insw,
-	.mv_insl		= hd64465_insl,
-	.mv_outsb		= hd64465_outsb,
-	.mv_outsw		= hd64465_outsw,
-	.mv_outsl		= hd64465_outsl,
-
-	.mv_irq_demux		= hd64465_irq_demux,
-};
-ALIAS_MV(dmida)
-
diff --git a/arch/sh/boards/harp/Makefile b/arch/sh/boards/harp/Makefile
deleted file mode 100644
index eb753d31812..00000000000
--- a/arch/sh/boards/harp/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for STMicroelectronics board specific parts of the kernel
-#
-
-obj-y := irq.o setup.o mach.o led.o
-
-obj-$(CONFIG_PCI) += pcidma.o
-
diff --git a/arch/sh/boards/harp/irq.c b/arch/sh/boards/harp/irq.c
deleted file mode 100644
index 96bb41c9fc5..00000000000
--- a/arch/sh/boards/harp/irq.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * Looks after interrupts on the HARP board.
- *
- * Bases on the IPR irq system
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-
-#define NUM_EXTERNAL_IRQS 16
-
-// Early versions of the STB1 Overdrive required this nasty frig
-//#define INVERT_INTMASK_WRITES
-
-static void enable_harp_irq(unsigned int irq);
-static void disable_harp_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_harp_irq disable_harp_irq
-
-static void mask_and_ack_harp(unsigned int);
-static void end_harp_irq(unsigned int irq);
-
-static unsigned int startup_harp_irq(unsigned int irq)
-{
-	enable_harp_irq(irq);
-	return 0;		/* never anything pending */
-}
-
-static struct hw_interrupt_type harp_irq_type = {
-	.typename = "Harp-IRQ",
-	.startup = startup_harp_irq,
-	.shutdown = shutdown_harp_irq,
-	.enable = enable_harp_irq,
-	.disable = disable_harp_irq,
-	.ack = mask_and_ack_harp,
-	.end = end_harp_irq
-};
-
-static void disable_harp_irq(unsigned int irq)
-{
-	unsigned val, flags;
-	unsigned maskReg;
-	unsigned mask;
-	int pri;
-
-	if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
-		return;
-
-	pri = 15 - irq;
-
-	if (pri < 8) {
-		maskReg = EPLD_INTMASK0;
-	} else {
-		maskReg = EPLD_INTMASK1;
-		pri -= 8;
-	}
-
-	local_irq_save(flags);
-	mask = ctrl_inl(maskReg);
-	mask &= (~(1 << pri));
-#if defined(INVERT_INTMASK_WRITES)
-	mask ^= 0xff;
-#endif
-	ctrl_outl(mask, maskReg);
-	local_irq_restore(flags);
-}
-
-static void enable_harp_irq(unsigned int irq)
-{
-	unsigned flags;
-	unsigned maskReg;
-	unsigned mask;
-	int pri;
-
-	if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
-		return;
-
-	pri = 15 - irq;
-
-	if (pri < 8) {
-		maskReg = EPLD_INTMASK0;
-	} else {
-		maskReg = EPLD_INTMASK1;
-		pri -= 8;
-	}
-
-	local_irq_save(flags);
-	mask = ctrl_inl(maskReg);
-
-
-	mask |= (1 << pri);
-
-#if defined(INVERT_INTMASK_WRITES)
-	mask ^= 0x