sh: Kill off the rest of arch/sh64/kernel/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 files changed, 0 insertions, 2236 deletions

diff --git a/arch/sh64/kernel/Makefile b/arch/sh64/kernel/Makefile
deleted file mode 100644
index e3467bda616..00000000000
--- a/arch/sh64/kernel/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2000, 2001  Paolo Alberelli
-# Copyright (C) 2003  Paul Mundt
-#
-# Makefile for the Linux sh64 kernel.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-extra-y	:= head.o init_task.o vmlinux.lds
-
-obj-y	:= process.o signal.o entry.o traps.o irq.o irq_intc.o \
-	   ptrace.o setup.o time.o sys_sh64.o semaphore.o sh_ksyms.o \
-	   switchto.o syscalls.o
-
-obj-$(CONFIG_HEARTBEAT)		+= led.o
-obj-$(CONFIG_SH_ALPHANUMERIC)	+= alphanum.o
-obj-$(CONFIG_SH_DMA)		+= dma.o
-obj-$(CONFIG_SH_FPU)		+= fpu.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_KALLSYMS)		+= unwind.o
-obj-$(CONFIG_PCI)		+= pcibios.o
-obj-$(CONFIG_MODULES)		+= module.o
-
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_CPU_SH5)		+= pci_sh5.o
-endif
-
-USE_STANDARD_AS_RULE := true
-
diff --git a/arch/sh64/kernel/alphanum.c b/arch/sh64/kernel/alphanum.c
deleted file mode 100644
index d1619d95fba..00000000000
--- a/arch/sh64/kernel/alphanum.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/sh64/kernel/alphanum.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Machine-independent functions for handling 8-digit alphanumeric display
- * (e.g. Agilent HDSP-253x)
- */
-#include <linux/stddef.h>
-#include <linux/sched.h>
-
-void mach_alphanum(int pos, unsigned char val);
-
-void print_seg(char *file, int line)
-{
-	int i;
-	unsigned int nibble;
-
-	for (i = 0; i < 5; i++) {
-		mach_alphanum(i, file[i]);
-	}
-
-	for (i = 0; i < 3; i++) {
-		nibble = ((line >> (i * 4)) & 0xf);
-		mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48));
-	}
-}
-
-void print_seg_num(unsigned num)
-{
-	int i;
-	unsigned int nibble;
-
-	for (i = 0; i < 8; i++) {
-		nibble = ((num >> (i * 4)) & 0xf);
-
-		mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48));
-	}
-}
-
diff --git a/arch/sh64/kernel/dma.c b/arch/sh64/kernel/dma.c
deleted file mode 100644
index 32c6f0549bf..00000000000
--- a/arch/sh64/kernel/dma.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * arch/sh64/kernel/dma.c
- *
- * DMA routines for the SH-5 DMAC.
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <asm/hardware.h>
-#include <asm/dma.h>
-#include <asm/signal.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
-typedef struct {
-	unsigned long dev_addr;
-	unsigned long mem_addr;
-
-	unsigned int mode;
-	unsigned int count;
-} dma_info_t;
-
-static dma_info_t dma_info[MAX_DMA_CHANNELS];
-static DEFINE_SPINLOCK(dma_spin_lock);
-
-/* arch/sh64/kernel/irq_intc.c */
-extern void make_intc_irq(unsigned int irq);
-
-/* DMAC Interrupts */
-#define DMA_IRQ_DMTE0	18
-#define DMA_IRQ_DERR	22
-
-#define DMAC_COMMON_BASE	(dmac_base + 0x08)
-#define DMAC_SAR_BASE		(dmac_base + 0x10)
-#define DMAC_DAR_BASE		(dmac_base + 0x18)
-#define DMAC_COUNT_BASE		(dmac_base + 0x20)
-#define DMAC_CTRL_BASE		(dmac_base + 0x28)
-#define DMAC_STATUS_BASE	(dmac_base + 0x30)
-
-#define DMAC_SAR(n)	(DMAC_SAR_BASE    + ((n) * 0x28))
-#define DMAC_DAR(n)	(DMAC_DAR_BASE    + ((n) * 0x28))
-#define DMAC_COUNT(n)	(DMAC_COUNT_BASE  + ((n) * 0x28))
-#define DMAC_CTRL(n)	(DMAC_CTRL_BASE   + ((n) * 0x28))
-#define DMAC_STATUS(n)	(DMAC_STATUS_BASE + ((n) * 0x28))
-
-/* DMAC.COMMON Bit Definitions */
-#define DMAC_COMMON_PR	0x00000001	/* Priority */
-					/* Bits 1-2 Reserved */
-#define DMAC_COMMON_ME	0x00000008	/* Master Enable */
-#define DMAC_COMMON_NMI	0x00000010	/* NMI Flag */
-					/* Bits 5-6 Reserved */
-#define DMAC_COMMON_ER	0x00000780	/* Error Response */
-#define DMAC_COMMON_AAE	0x00007800	/* Address Alignment Error */
-					/* Bits 15-63 Reserved */
-
-/* DMAC.SAR Bit Definitions */
-#define DMAC_SAR_ADDR	0xffffffff	/* Source Address */
-
-/* DMAC.DAR Bit Definitions */
-#define DMAC_DAR_ADDR	0xffffffff	/* Destination Address */
-
-/* DMAC.COUNT Bit Definitions */
-#define DMAC_COUNT_CNT	0xffffffff	/* Transfer Count */
-
-/* DMAC.CTRL Bit Definitions */
-#define DMAC_CTRL_TS	0x00000007	/* Transfer Size */
-#define DMAC_CTRL_SI	0x00000018	/* Source Increment */
-#define DMAC_CTRL_DI	0x00000060	/* Destination Increment */
-#define DMAC_CTRL_RS	0x00000780	/* Resource Select */
-#define DMAC_CTRL_IE	0x00000800	/* Interrupt Enable */
-#define DMAC_CTRL_TE	0x00001000	/* Transfer Enable */
-					/* Bits 15-63 Reserved */
-
-/* DMAC.STATUS Bit Definitions */
-#define DMAC_STATUS_TE	0x00000001	/* Transfer End */
-#define DMAC_STATUS_AAE	0x00000002	/* Address Alignment Error */
-					/* Bits 2-63 Reserved */
-
-static unsigned long dmac_base;
-
-void set_dma_count(unsigned int chan, unsigned int count);
-void set_dma_addr(unsigned int chan, unsigned int addr);
-
-static irqreturn_t dma_mte(int irq, void *dev_id, struct pt_regs *regs)
-{
-	unsigned int chan = irq - DMA_IRQ_DMTE0;
-	dma_info_t *info = dma_info + chan;
-	u64 status;
-
-	if (info->mode & DMA_MODE_WRITE) {
-		sh64_out64(info->mem_addr & DMAC_SAR_ADDR, DMAC_SAR(chan));
-	} else {
-		sh64_out64(info->mem_addr & DMAC_DAR_ADDR, DMAC_DAR(chan));
-	}
-
-	set_dma_count(chan, info->count);
-
-	/* Clear the TE bit */
-	status = sh64_in64(DMAC_STATUS(chan));
-	status &= ~DMAC_STATUS_TE;
-	sh64_out64(status, DMAC_STATUS(chan));
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq_dmte = {
-	.handler	= dma_mte,
-	.flags		= IRQF_DISABLED,
-	.name		= "DMA MTE",
-};
-
-static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
-{
-	u64 tmp;
-	u8 chan;
-
-	printk(KERN_NOTICE "DMAC: Got a DMA Error!\n");
-
-	tmp = sh64_in64(DMAC_COMMON_BASE);
-
-	/* Check for the type of error */
-	if ((chan = tmp & DMAC_COMMON_AAE)) {
-		/* It's an address alignment error.. */
-		printk(KERN_NOTICE "DMAC: Alignment error on channel %d, ", chan);
-
-		printk(KERN_NOTICE "SAR: 0x%08llx, DAR: 0x%08llx, COUNT: %lld\n",
-		       (sh64_in64(DMAC_SAR(chan)) & DMAC_SAR_ADDR),
-		       (sh64_in64(DMAC_DAR(chan)) & DMAC_DAR_ADDR),
-		       (sh64_in64(DMAC_COUNT(chan)) & DMAC_COUNT_CNT));
-
-	} else if ((chan = tmp & DMAC_COMMON_ER)) {
-		/* Something else went wrong.. */
-		printk(KERN_NOTICE "DMAC: Error on channel %d\n", chan);
-	}
-
-	/* Reset the ME bit to clear the interrupt */
-	tmp |= DMAC_COMMON_ME;
-	sh64_out64(tmp, DMAC_COMMON_BASE);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq_derr = {
-	.handler	= dma_err,
-	.flags		= IRQF_DISABLED,
-	.name		= "DMA Error",
-};
-
-static inline unsigned long calc_xmit_shift(unsigned int chan)
-{
-	return sh64_in64(DMAC_CTRL(chan)) & 0x03;
-}
-
-void setup_dma(unsigned int chan, dma_info_t *info)
-{
-	unsigned int irq = DMA_IRQ_DMTE0 + chan;
-	dma_info_t *dma = dma_info + chan;
-
-	make_intc_irq(irq);
-	setup_irq(irq, &irq_dmte);
-	dma = info;
-}
-
-void enable_dma(unsigned int chan)
-{
-	u64 ctrl;
-
-	ctrl = sh64_in64(DMAC_CTRL(chan));
-	ctrl |= DMAC_CTRL_TE;
-	sh64_out64(ctrl, DMAC_CTRL(chan));
-}
-
-void disable_dma(unsigned int chan)
-{
-	u64 ctrl;
-
-	ctrl = sh64_in64(DMAC_CTRL(chan));
-	ctrl &= ~DMAC_CTRL_TE;
-	sh64_out64(ctrl, DMAC_CTRL(chan));
-}
-
-void set_dma_mode(unsigned int chan, char mode)
-{
-	dma_info_t *info = dma_info + chan;
-
-	info->mode = mode;
-
-	set_dma_addr(chan, info->mem_addr);
-	set_dma_count(chan, info->count);
-}
-
-void set_dma_addr(unsigned int chan, unsigned int addr)
-{
-	dma_info_t *info = dma_info + chan;
-	unsigned long sar, dar;
-
-	info->mem_addr = addr;
-	sar = (info->mode & DMA_MODE_WRITE) ? info->mem_addr : info->dev_addr;
-	dar = (info->mode & DMA_MODE_WRITE) ? info->dev_addr : info->mem_addr;
-
-	sh64_out64(sar & DMAC_SAR_ADDR, DMAC_SAR(chan));
-	sh64_out64(dar & DMAC_SAR_ADDR, DMAC_DAR(chan));
-}
-
-void set_dma_count(unsigned int chan, unsigned int count)
-{
-	dma_info_t *info = dma_info + chan;
-	u64 tmp;
-
-	info->count = count;
-
-	tmp = (info->count >> calc_xmit_shift(chan)) & DMAC_COUNT_CNT;
-
-	sh64_out64(tmp, DMAC_COUNT(chan));
-}
-
-unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma_spin_lock, flags);
-
-	return flags;
-}
-
-void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-int get_dma_residue(unsigned int chan)
-{
-	return sh64_in64(DMAC_COUNT(chan) << calc_xmit_shift(chan));
-}
-
-int __init init_dma(void)
-{
-	struct vcr_info vcr;
-	u64 tmp;
-
-	/* Remap the DMAC */
-	dmac_base = onchip_remap(PHYS_DMAC_BLOCK, 1024, "DMAC");
-	if (!dmac_base) {
-		printk(KERN_ERR "Unable to remap DMAC\n");
-		return -ENOMEM;
-	}
-
-	/* Report DMAC.VCR Info */
-	vcr = sh64_get_vcr_info(dmac_base);
-	printk("DMAC: Module ID: 0x%04x, Module version: 0x%04x\n",
-	       vcr.mod_id, vcr.mod_vers);
-
-	/* Set the ME bit */
-	tmp = sh64_in64(DMAC_COMMON_BASE);
-	tmp |= DMAC_COMMON_ME;
-	sh64_out64(tmp, DMAC_COMMON_BASE);
-
-	/* Enable the DMAC Error Interrupt */
-	make_intc_irq(DMA_IRQ_DERR);
-	setup_irq(DMA_IRQ_DERR, &irq_derr);
-
-	return 0;
-}
-
-static void __exit exit_dma(void)
-{
-	onchip_unmap(dmac_base);
-	free_irq(DMA_IRQ_DERR, 0);
-}
-
-module_init(init_dma);
-module_exit(exit_dma);
-
-MODULE_AUTHOR("Paul Mundt");
-MODULE_DESCRIPTION("DMA API for SH-5 DMAC");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(setup_dma);
-EXPORT_SYMBOL(claim_dma_lock);
-EXPORT_SYMBOL(release_dma_lock);
-EXPORT_SYMBOL(enable_dma);
-EXPORT_SYMBOL(disable_dma);
-EXPORT_SYMBOL(set_dma_mode);
-EXPORT_SYMBOL(set_dma_addr);
-EXPORT_SYMBOL(set_dma_count);
-EXPORT_SYMBOL(get_dma_residue);
-
diff --git a/arch/sh64/kernel/early_printk.c b/arch/sh64/kernel/early_printk.c
deleted file mode 100644
index 4f913112367..00000000000
--- a/arch/sh64/kernel/early_printk.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh64/kernel/early_printk.c
- *
- * SH-5 Early SCIF console (cloned and hacked from sh implementation)
- *
- * Copyright (C) 2003, 2004  Paul Mundt <lethal@linux-sh.org>
- * Copyright (C) 2002  M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-#define SCIF_BASE_ADDR	0x01030000
-#define SCIF_ADDR_SH5	PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
-
-/*
- * Fixed virtual address where SCIF is mapped (should already be done
- * in arch/sh64/kernel/head.S!).
- */
-#define SCIF_REG	0xfa030000
-
-enum {
-	SCIF_SCSMR2	= SCIF_REG + 0x00,
-	SCIF_SCBRR2	= SCIF_REG + 0x04,
-	SCIF_SCSCR2	= SCIF_REG + 0x08,
-	SCIF_SCFTDR2	= SCIF_REG + 0x0c,
-	SCIF_SCFSR2	= SCIF_REG + 0x10,
-	SCIF_SCFRDR2	= SCIF_REG + 0x14,
-	SCIF_SCFCR2	= SCIF_REG + 0x18,
-	SCIF_SCFDR2	= SCIF_REG + 0x1c,
-	SCIF_SCSPTR2	= SCIF_REG + 0x20,
-	SCIF_SCLSR2	= SCIF_REG + 0x24,
-};
-
-static void sh_console_putc(int c)
-{
-	while (!(ctrl_inw(SCIF_SCFSR2) & 0x20))
-		cpu_relax();
-
-	ctrl_outb(c, SCIF_SCFTDR2);
-	ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0x9f), SCIF_SCFSR2);
-
-	if (c == '\n')
-		sh_console_putc('\r');
-}
-
-static void sh_console_flush(void)
-{
-	ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2);
-
-	while (!(ctrl_inw(SCIF_SCFSR2) & 0x40))
-		cpu_relax();
-
-	ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2);
-}
-
-static void sh_console_write(struct console *con, const char *s, unsigned count)
-{
-	while (count-- > 0)
-		sh_console_putc(*s++);
-
-	sh_console_flush();
-}
-
-static int __init sh_console_setup(struct console *con, char *options)
-{
-	con->cflag = CREAD | HUPCL | CLOCAL | B19200 | CS8;
-
-	return 0;
-}
-
-static struct console sh_console = {
-	.name		= "scifcon",
-	.write		= sh_console_write,
-	.setup		= sh_console_setup,
-	.flags		= CON_PRINTBUFFER | CON_BOOT,
-	.index		= -1,
-};
-
-void __init enable_early_printk(void)
-{
-	ctrl_outb(0x2a, SCIF_SCBRR2);	/* 19200bps */
-
-	ctrl_outw(0x04, SCIF_SCFCR2);	/* Reset TFRST */
-	ctrl_outw(0x10, SCIF_SCFCR2);	/* TTRG0=1 */
-
-	ctrl_outw(0, SCIF_SCSPTR2);
-	ctrl_outw(0x60, SCIF_SCFSR2);
-	ctrl_outw(0, SCIF_SCLSR2);
-	ctrl_outw(0x30, SCIF_SCSCR2);
-
-	register_console(&sh_console);
-}
diff --git a/arch/sh64/kernel/led.c b/arch/sh64/kernel/led.c
deleted file mode 100644
index e35d3f667fb..00000000000
--- a/arch/sh64/kernel/led.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/sh64/kernel/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Flash the LEDs
- */
-#include <linux/stddef.h>
-#include <linux/sched.h>
-
-void mach_led(int pos, int val);
-
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void heartbeat(void)
-{
-	static unsigned int cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist) {
-		mach_led(-1, 1);
-	} else if (cnt == 7 || cnt == dist + 7) {
-		mach_led(-1, 0);
-	}
-
-	if (++cnt > period) {
-		cnt = 0;
-
-		/*
-		 * The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51, f(inf)->30.
-		 */
-		period = ((672 << FSHIFT) / (5 * avenrun[0] +
-					    (7 << FSHIFT))) + 30;
-		dist = period / 4;
-	}
-}
-
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
deleted file mode 100644
index b4d9534d2b0..00000000000
--- a/arch/sh64/kernel/pci_sh5.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Support functions for the SH5 PCI hardware.
- */
-
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <asm/pci.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include "pci_sh5.h"
-
-static unsigned long pcicr_virt;
-unsigned long pciio_virt;
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
-	int i;
-
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	printk("PCI: IDE base address fixup for %s\n", pci_name(d));
-	for(i=0; i<4; i++) {
-		struct resource *r = &d->resource[i];
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
-	return str;
-}
-
-/* Rounds a number UP to the nearest power of two. Used for
- * sizing the PCI window.
- */
-static u32 __init r2p2(u32 num)
-{
-	int i = 31;
-	u32 tmp = num;
-
-	if (num == 0)
-		return 0;
-
-	do {
-		if (tmp & (1 << 31))
-			break;
-		i--;
-		tmp <<= 1;
-	} while (i >= 0);
-
-	tmp = 1 << i;
-	/* If the original number isn't a power of 2, round it up */
-	if (tmp != num)
-		tmp <<= 1;
-
-	return tmp;
-}
-
-extern unsigned long long memory_start, memory_end;
-
-int __init sh5pci_init(unsigned memStart, unsigned memSize)
-{
-	u32 lsr0;
-	u32 uval;
-
-	pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
-	if (!pcicr_virt) {
-		panic("Unable to remap PCICR\n");
-	}
-
-	pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
-	if (!pciio_virt) {
-		panic("Unable to remap PCIIO\n");
-	}
-
-	pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
-
-	/* Clear snoop registers */
-        SH5PCI_WRITE(CSCR0, 0);
-        SH5PCI_WRITE(CSCR1, 0);
-
-	pr_debug("Wrote to reg\n");
-
-        /* Switch off interrupts */
-        SH5PCI_WRITE(INTM,  0);
-        SH5PCI_WRITE(AINTM, 0);
-        SH5PCI_WRITE(PINTM, 0);
-
-        /* Set bus active, take it out of reset */
-        uval = SH5PCI_READ(CR);
-
-	/* Set command Register */
-        SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
-
-	uval=SH5PCI_READ(CR);
-        pr_debug("CR is actually 0x%08x\n",uval);
-
-        /* Allow it to be a master */
-	/* NB - WE DISABLE I/O ACCESS to stop overlap */
-        /* set WAIT bit to enable stepping, an attempt to improve stability */
-	SH5PCI_WRITE_SHORT(CSR_CMD,
-			    PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
-
-        /*
-        ** Set translation mapping memory in order to convert the address
-        ** used for the main bus, to the PCI internal address.
-        */
-        SH5PCI_WRITE(MBR,0x40000000);
-
-        /* Always set the max size 512M */
-        SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
-
-        /*
-        ** I/O addresses are mapped at internal PCI specific address
-        ** as is described into the configuration bridge table.
-        ** These are changed to 0, to allow cards that have legacy
-        ** io such as vga to function correctly. We set the SH5 IOBAR to
-        ** 256K, which is a bit big as we can only have 64K of address space
-        */
-
-        SH5PCI_WRITE(IOBR,0x0);
-
-	pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
-
-        /* Set up a 256K window. Totally pointless waste  of address space */
-        SH5PCI_WRITE(IOBMR,0);
-	pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
-
-	/* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
-         * we would want to map the I/O region somewhere, but it is so big this is not
-         * that easy!
-         */
-	SH5PCI_WRITE(CSR_IBAR0,~0);
-	/* Set memory size value */
-        memSize = memory_end - memory_start;
-
-        /* Now we set up the mbars so the PCI bus can see the memory of the machine */
-        if (memSize < (1024 * 1024)) {
-                printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
-                return -EINVAL;
-        }
-
-        /* Set LSR 0 */
-        lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
-        SH5PCI_WRITE(LSR0, lsr0);
-
-	pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
-
-        /* Set MBAR 0 */
-        SH5PCI_WRITE(CSR_MBAR0, memory_start);
-        SH5PCI_WRITE(LAR0, memory_start);
-
-        SH5PCI_WRITE(CSR_MBAR1,0);
-        SH5PCI_WRITE(LAR1,0);
-        SH5PCI_WRITE(LSR1,0);
-
-	pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
-	pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
-
-        /* Enable the PCI interrupts on the device */
-        SH5PCI_WRITE(INTM,  ~0);
-        SH5PCI_WRITE(AINTM, ~0);
-        SH5PCI_WRITE(PINTM, ~0);
-
-	pr_debug("Switching on all error interrupts\n");
-
-        return(0);
-}
-
-static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 *val)
-{
-	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
-	switch (size) {
-		case 1:
-			*val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
-			break;
-		case 2:
-			*val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
-			break;
-		case 4:
-			*val = SH5PCI_READ(PDR);
-			break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
-			 int size, u32 val)
-{
-	SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
-	switch (size) {
-		case 1:
-			SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
-			break;
-		case 2:
-			SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
-			break;
-		case 4:
-			SH5PCI_WRITE(PDR, val);
-			break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_config_ops = {
-	.read =		sh5pci_read,
-	.write =	sh5pci_write,
-};
-
-/* Everything hangs off this */
-static struct pci_bus *pci_root_bus;
-
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
-	pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
-	         dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
-	return PCI_SLOT(dev->devfn);
-}
-
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
-	return (((pin-1) + slot) % 4) + 1;
-}
-
-u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	if (dev->bus->number != 0) {
-		u8 pin = *pinp;
-		do {
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-			/* Move up the chain of bridges. */
-			dev = dev->bus->self;
-		} while (dev->bus->self);
-		*pinp = pin;
-
-		/* The slot is the slot of the last bridge. */
-	}
-
-	return PCI_SLOT(dev->devfn);
-}
-
-/* This needs to be shunted out of here into the board specific bit */
-
-static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int result = -1;
-
-	/* The complication here is that the PCI IRQ lines from the Cayman's 2
-	   5V slots get into the CPU via a different path from the IRQ lines
-	   from the 3 3.3V slots.  Thus, we have to detect whether the card's
-	   interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
-	   at the point where we cross from 5V to 3.3V is not the normal case.
-
-	   The added complication is that we don't know that the 5V slots are
-	   always bus 2, because a card containing a PCI-PCI bridge may be
-	   plugged into a 3.3V slot, and this changes the bus numbering.
-
-	   Also, the Cayman has an intermediate PCI bus that goes a custom
-	   expansion board header (and to the secondary bridge).  This bus has
-	   never been used in practice.
-
-	   The 1ary onboard PCI-PCI bridge is device 3 on bus 0
-	   The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
-	   */
-
-	struct slot_pin {
-		int slot;
-		int pin;
-	} path[4];
-	int i=0;
-
-	while (dev->bus->number > 0) {
-
-		slot = path[i].slot = PCI_SLOT(dev->devfn);
-		pin = path[i].pin = bridge_swizzle(pin, slot);
-		dev = dev->bus->self;
-		i++;
-		if (i > 3) panic("PCI path to root bus too long!\n");
-	}
-
-	slot = PCI_SLOT(dev->devfn);
-	/* This is the slot on bus 0 through which the device is eventually
-	   reachable. */
-
-	/* Now work back up. */
-	if ((slot < 3) || (i == 0)) {
-		/* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
-		   swizzle now. */
-		result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
-	} else {
-		i--;
-		slot = path[i].slot;
-		pin  = path[i].pin;
-		if (slot > 0) {
-			panic("PCI expansion bus device found - not handled!\n");
-		} else {
-			if (i > 0) {
-				/* 5V slots */
-				i--;
-				slot = path[i].slot;
-				pin  = path[i].pin;
-				/* 'pin' was swizzled earlier wrt slot, don't do it again. */
-				result = IRQ_P2INTA + (pin - 1);
-			} else {
-				/* IRQ for 2ary PCI-PCI bridge : unused */
-				result = -1;
-			}
-		}
-	}
-
-	return result;
-}
-
-static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	unsigned pci_int, pci_air, pci_cir, pci_aint;
-
-	pci_int = SH5PCI_READ(INT);
-	pci_cir = SH5PCI_READ(CIR);
-	pci_air = SH5PCI_READ(AIR);
-
-	if (pci_int) {
-		printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
-		printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
-		printk("PCI AIR -> 0x%x\n", pci_air);
-		printk("PCI CIR -> 0x%x\n", pci_cir);
-		SH5PCI_WRITE(INT, ~0);
-	}
-
-	pci_aint = SH5PCI_READ(AINT);
-	if (pci_aint) {
-		printk("PCI ARB INTERRUPT!\n");
-		printk("PCI AINT -> 0x%x\n", pci_aint);
-		printk("PCI AIR -> 0x%x\n", pci_air);
-		printk("PCI CIR -> 0x%x\n", pci_cir);
-		SH5PCI_WRITE(AINT, ~0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
-{
-	printk("SERR IRQ\n");
-
-	return IRQ_NONE;
-}
-
-static void __init
-pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
-		    struct resource *memr)
-{
-	struct resource io_res, mem_res;
-	struct pci_dev *dev;
-	struct pci_dev *bridge = bus->self;
-	struct list_head *ln;
-
-	if (!bridge)
-		return;	/* host bridge, nothing to do */
-
-	/* set reasonable default locations for pcibios_align_resource */
-	io_res.start = PCIBIOS_MIN_IO;
-	mem_res.start = PCIBIOS_MIN_MEM;
-
-	io_res.end = io_res.start;
-	mem_res.end = mem_res.start;
-
-	/* Collect information about how our direct children are layed out. */
-	for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
-		int i;
-		dev = pci_dev_b(ln);
-
-		/* Skip bridges for now */
-		if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
-			continue;
-
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource res;
-			unsigned long size;
-
-			memcpy(&res, &dev->resource[i], sizeof(res));
-			size = res.end - res.start + 1;
-
-			if (res.flags & IORESOURCE_IO) {
-				res.start = io_res.end;
-				pcibios_align_resource(dev, &res, size, 0);
-				io_res.end = res.start + size;
-			} else if (res.flags & IORESOURCE_MEM) {
-				res.start = mem_res.end;
-				pcibios_align_resource(dev, &res, size, 0);
-				mem_res.end = res.start + size;
-			}
-		}
-	}
-
-	/* And for all of the subordinate busses. */
-	for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
-		pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
-
-	/* turn the ending locations into sizes (subtract start) */
-	io_res.end -= io_res.start;
-	mem_res.end -= mem_res.start;
-
-	/* Align the sizes up by bridge rules */
-	io_res.end = ALIGN(io_res.end, 4*1024) - 1;
-	mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
-
-	/* Adjust the bridge's allocation requirements */
-	bridge->resource[0].end = bridge->resource[0].start + io_res.end;
-	bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
-
-	bridge->resource[PCI_BRIDGE_RESOURCES].end =
-	    bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
-	bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
-	    bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
-
-	/* adjust parent's resource requirements */
-	if (ior) {
-		ior->end = ALIGN(ior->end, 4*1024);
-		ior->end += io_res.end;
-	}
-
-	if (memr) {
-		memr->end = ALIGN(memr->end, 1*1024*1024);
-		memr->end += mem_res.end;
-	}
-}
-
-static void __init pcibios_size_bridges(void)
-{
-	struct resource io_res, mem_res;
-
-	memset(&io_res, 0, sizeof(io_res));
-	memset(&mem_res, 0, sizeof(mem_res));
-
-	pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
-}
-
-static int __init pcibios_init(void)
-{
-        if (request_irq(IRQ_ERR, pcish5_err_irq,
-                        IRQF_DISABLED, "PCI Error",NULL) < 0) {
-                printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
-                return -EINVAL;
-        }
-
-        if (request_irq(IRQ_SERR, pcish5_serr_irq,
-                        IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
-                printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
-                return -EINVAL;
-        }
-
-	/* The pci subsystem needs to know where memory is and how much
-	 * of it there is. I've simply made these globals. A better mechanism
-	 * is probably needed.
-	 */
-	sh5pci_init(__pa(memory_start),
-		     __pa(memory_end) - __pa(memory_start));
-
-	pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
-	pcibios_size_bridges();
-	pci_assign_unassigned_resources();
-	pci_fixup_irqs(no_swizzle, map_cayman_irq);
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev = bus->self;
-	int i;
-
-#if 1
-	if(dev) {
-		for(i=0; i<3; i++) {
-			bus->resource[i] =
-				&dev->resource[PCI_BRIDGE_RESOURCES+i];
-			bus->resource[i]->name = bus->name;
-		}
-		bus->resource[0]->flags |= IORESOURCE_IO;
-		bus->resource[1]->flags |= IORESOURCE_MEM;
-
-		/* For now, propagate host limits to the bus;
-		 * we'll adjust them later. */
-
-#if 1
-		bus->resource[0]->end = 64*1024 - 1 ;
-		bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
-		bus->resource[0]->start = PCIBIOS_MIN_IO;
-		bus->resource[1]->start = PCIBIOS_MIN_MEM;
-#else
-		bus->resource[0]->end = 0;
-		bus->resource[1]->end = 0;
-		bus->resource[0]->start =0;
-		bus->resource[1]->start = 0;
-#endif
-		/* Turn off downstream PF memory address range by default */
-		bus->resource[2]->start = 1024*1024;
-		bus->resource[2]->end = bus->resource[2]->start - 1;
-	}
-#endif
-
-}
-
diff --git a/arch/sh64/kernel/pci_sh5.h b/arch/sh64/kernel/pci_sh5.h
deleted file mode 100644
index c71159dd04b..00000000000
--- a/arch/sh64/kernel/pci_sh5.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Definitions for the SH5 PCI hardware.
- */
-
-/* Product ID */
-#define PCISH5_PID		0x350d
-
-/* vendor ID */
-#define PCISH5_VID		0x1054
-
-/* Configuration types */
-#define ST_TYPE0                0x00    /* Configuration cycle type 0 */
-#define ST_TYPE1                0x01    /* Configuration cycle type 1 */
-
-/* VCR data */
-#define PCISH5_VCR_STATUS      0x00
-#define PCISH5_VCR_VERSION     0x08
-
-/*
-** ICR register offsets and bits
-*/
-#define PCISH5_ICR_CR          0x100   /* PCI control register values */
-#define CR_PBAM                 (1<<12)
-#define CR_PFCS                 (1<<11)
-#define CR_FTO                  (1<<10)
-#define CR_PFE                  (1<<9)
-#define CR_TBS                  (1<<8)
-#define CR_SPUE                 (1<<7)
-#define CR_BMAM                 (1<<6)
-#define CR_HOST                 (1<<5)
-#define CR_CLKEN                (1<<4)
-#define CR_SOCS                 (1<<3)
-#define CR_IOCS                 (1<<2)
-#define CR_RSTCTL               (1<<1)
-#define CR_CFINT                (1<<0)
-#define CR_LOCK_MASK            0xa5000000
-
-#define PCISH5_ICR_INT         0x114   /* Interrupt registert values     */
-#define INT_MADIM               (1<<2)
-
-#define PCISH5_ICR_LSR0        0X104   /* Local space register values    */
-#define PCISH5_ICR_LSR1        0X108   /* Local space register values    */
-#define PCISH5_ICR_LAR0        0x10c   /* Local address register values  */
-#define PCISH5_ICR_LAR1        0x110   /* Local address register values  */
-#define PCISH5_ICR_INTM        0x118   /* Interrupt mask register values                         */
-#define PCISH5_ICR_AIR         0x11c   /* Interrupt error address information register values    */
-#define PCISH5_ICR_CIR         0x120   /* Interrupt error command information register values    */
-#define PCISH5_ICR_AINT        0x130   /* Interrupt error arbiter interrupt register values      */
-#define PCISH5_ICR_AINTM       0x134   /* Interrupt error arbiter interrupt mask register values */
-#define PCISH5_ICR_BMIR        0x138   /* Interrupt error info register of bus master values     */
-#define PCISH5_ICR_PAR         0x1c0   /* Pio address register values                            */
-#define PCISH5_ICR_MBR         0x1c4   /* Memory space bank register values                      */
-#define PCISH5_ICR_IOBR        0x1c8   /* I/O space bank register values                         */
-#define PCISH5_ICR_PINT        0x1cc   /* power management interrupt register values             */
-#define PCISH5_ICR_PINTM       0x1d0   /* power management interrupt mask register values        */
-#define PCISH5_ICR_MBMR        0x1d8   /* memory space bank mask register values                 */
-#define PCISH5_ICR_IOBMR       0x1dc   /* I/O space bank mask register values                    */
-#define PCISH5_ICR_CSCR0       0x210   /* PCI cache snoop control register 0                     */
-#define PCISH5_ICR_CSCR1       0x214   /* PCI cache snoop control register 1                     */
-#define PCISH5_ICR_PDR         0x220   /* Pio data register values                               */
-
-/* These are configs space registers */
-#define PCISH5_ICR_CSR_VID     0x000	/* Vendor id                           */
-#define PCISH5_ICR_CSR_DID     0x002   /* Device id                           */
-#define PCISH5_ICR_CSR_CMD     0x004   /* Command register                    */
-#define PCISH5_ICR_CSR_STATUS  0x006   /* Stautus                             */
-#define PCISH5_ICR_CSR_IBAR0   0x010   /* I/O base address register           */
-#define PCISH5_ICR_CSR_MBAR0   0x014   /* First  Memory base address register */
-#define PCISH5_ICR_CSR_MBAR1   0x018   /* Second Memory base address register */
-
-
-
-/* Base address of registers */
-#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
-#define SH5PCI_IO_BASE  (PHYS_PCI_BLOCK + 0x00800000)
-/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG)    */
-
-/* Register selection macro */
-#define PCISH5_ICR_REG(x)                ( pcicr_virt + (PCISH5_ICR_##x))
-/* #define PCISH5_VCR_REG(x)                ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
-
-/* Write I/O functions */
-#define SH5PCI_WRITE(reg,val)        ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val)  ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val)   ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
-
-/* Read I/O functions */
-#define SH5PCI_READ(reg)             ctrl_inl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg)       ctrl_inw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg)        ctrl_inb(PCISH5_ICR_REG(reg))
-
-/* Set PCI config bits */
-#define SET_CONFIG_BITS(bus,devfn,where)  ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
-
-/* Set PCI command register */
-#define CONFIG_CMD(bus, devfn, where)            SET_CONFIG_BITS(bus->number,devfn,where)
-
-/* Size converters */
-#define PCISH5_MEM_SIZCONV(x)		  (((x / 0x40000) - 1) << 18)
-#define PCISH5_IO_SIZCONV(x)		  (((x / 0x40000) - 1) << 18)
-
-
diff --git a/arch/sh64/kernel/pcibios.c b/arch/sh64/kernel/pcibios.c
deleted file mode 100644
index 945920bc24d..00000000000
--- a/arch/sh64/kernel/pcibios.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * $Id: pcibios.c,v 1.1 2001/08/24 12:38:19 dwmw2 Exp $
- *
- * arch/sh/kernel/pcibios.c
- *
- * Copyright (C) 2002 STMicroelectronics Limited
- *   Author : David J. McKay
- *
- * Copyright (C) 2004 Richard Curnow, SuperH UK Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- * This is GPL'd.
- *
- * Provided here are generic versions of:
- *	pcibios_update_resource()
- *	pcibios_align_resource()
- *	pcibios_enable_device()
- *	pcibios_set_master()
- *	pcibios_update_irq()
- *
- * These functions are collected here to reduce duplication of common
- * code amongst the many platform-specific PCI support code files.
- *
- * Platform-specific files are expected to provide:
- *	pcibios_fixup_bus()
- *	pcibios_init()
- *	pcibios_setup()
- *	pcibios_fixup_pbus_ranges()
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
-{
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
-}
-
-static void pcibios_enable_bridge(struct pci_dev *dev)
-{
-	struct pci_bus *bus = dev->subordinate;
-	u16 cmd, old_cmd;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-
-	if (bus->resource[0]->flags & IORESOURCE_IO) {
-		cmd |= PCI_COMMAND_IO;
-	}
-	if ((bus->resource[1]->flags & IORESOURCE_MEM) ||
-	    (bus->resource[2]->flags & IORESOURCE_PREFETCH)) {
-		cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	if (cmd != old_cmd) {
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-
-	printk("PCI bridge %s, command register -> %04x\n",
-		pci_name(dev), cmd);
-
-}
-
-
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
-		pcibios_enable_bridge(dev);
-	}
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for(idx=0; idx<6; idx++) {
-		if (!(mask & (1 << idx)))
-			continue;
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-/*
- *  If we set up a device for bus mastering, we need to check and set
- *  the latency timer as it may not be properly set.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
-	u8 lat;
-	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-	if (lat < 16)
-		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
-	else if (lat > pcibios_max_latency)
-		lat = pcibios_max_latency;
-	else
-		return;
-	printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c
deleted file mode 100644
index 2b7264c0c6f..00000000000
--- a/arch/sh64/kernel/setup.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/setup.c
- *
- * sh64 Arch Support
- *
- * This file handles the architecture-dependent parts of initialization
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003, 2004  Paul Mundt
- *
- * benedict.gaster@superh.com:   2nd May 2002
- *    Modified to use the empty_zero_page to pass command line arguments.
- *
- * benedict.gaster@superh.com:	 3rd May 2002
- *    Added support for ramdisk, removing statically linked romfs at the same time.
- *
- * lethal@linux-sh.org:          15th May 2003
- *    Added generic procfs cpuinfo reporting. Make boards just export their name.
- *
- * lethal@linux-sh.org:          25th May 2003
- *    Added generic get_cpu_subtype() for subtype reporting from cpu_data->type.
- *
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/blkdev.h>
-#include <linux/bootmem.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/initrd.h>
-#include <linux/pfn.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/platform.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/smp.h>
-
-struct screen_info screen_info;
-
-#ifdef CONFIG_BLK_DEV_RAM
-extern int rd_doload;		/* 1 = load ramdisk, 0 = don't load */
-extern int rd_prompt;		/* 1 = prompt for ramdisk, 0 = don't prompt */
-extern int rd_image_start;	/* starting block # of image */
-#endif
-
-extern int root_mountflags;
-extern char *get_system_type(void);
-extern void platform_setup(void);
-extern void platform_monitor(void);
-extern void platform_reserve(void);
-extern int sh64_cache_init(void);
-extern int sh64_tlb_init(void);
-
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-unsigned long long memory_start = CONFIG_MEMORY_START;
-unsigned long long memory_end = CONFIG_MEMORY_START + (CONFIG_MEMORY_SIZE_IN_MB * 1024 * 1024);
-
-struct sh_cpuinfo boot_cpu_data;
-
-static inline void parse_mem_cmdline (char ** cmdline_p)
-{
-        char c = ' ', *to = command_line, *from = COMMAND_LINE;
-	int len = 0;
-
-	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
-
-	for (;;) {
-	  /*
-	   * "mem=XXX[kKmM]" defines a size of memory.
-	   */
-	        if (c == ' ' && !memcmp(from, "mem=", 4)) {
-		      if (to != command_line)
-			to--;
-		      {
-			unsigned long mem_size;
-
-			mem_size = memparse(from+4, &from);
-			memory_end = memory_start + mem_size;
-		      }
-		}
-		c = *(from++);
-		if (!c)
-		  break;
-		if (COMMAND_LINE_SIZE <= ++len)
-		  break;
-		*(to++) = c;
-	}
-	*to = '\0';
-
-	*cmdline_p = command_line;
-}
-
-static void __init sh64_cpu_type_detect(void)
-{
-	extern unsigned long long peek_real_address_q(unsigned long long addr);
-	unsigned long long cir;
-	/* Do peeks in real mode to avoid having to set up a mapping for the
-	   WPC registers.  On SH5-101 cut2, such a mapping would be exposed to
-	   an address translation erratum which would make it hard to set up
-	   correctly. */
-	cir = peek_real_address_q(0x0d000008);
-
-	if ((cir & 0xffff) == 0x5103) {
-		boot_cpu_data.type = CPU_SH5_103;
-	} else if (((cir >> 32) & 0xffff) == 0x51e2) {
-		/* CPU.VCR aliased at CIR address on SH5-101 */
-		boot_cpu_data.type = CPU_SH5_101;
-	} else {
-		boot_cpu_data.type = CPU_SH_NONE;
-	}
-}
-
-void __init setup_arch(char **cmdline_p)
-{
-	unsigned long bootmap_size, i;
-	unsigned long first_pfn, start_pfn, last_pfn, pages;
-
-#ifdef CONFIG_EARLY_PRINTK
-	extern void enable_early_printk(void);
-
-	/*
-	 * Setup Early SCIF console
-	 */
-	enable_early_printk();
-#endif
-
-	/*
-	 * Setup TLB mappings
-	 */
-	sh64_tlb_init();
-
-	/*
-	 * Caches are already initialized by the time we get here, so we just
-	 * fill in cpu_data info for the caches.
-	 */
-	sh64_cache_init();
-
-	platform_setup();
-	platform_monitor();
-
-	sh64_cpu_type_detect();
-
-	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
-
-	if (!MOUNT_ROOT_RDONLY)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) _text;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) _end;
-
-	code_resource.start = __pa(_text);
-	code_resource.end = __pa(_etext)-1;
-	data_resource.start = __pa(_etext);
-	data_resource.end = __pa(_edata)-1;
-
-	parse_mem_cmdline(cmdline_p);
-
-	/*
-	 * Find the lowest and highest page frame numbers we have available
-	 */
-	first_pfn = PFN_DOWN(memory_start);
-	last_pfn = PFN_DOWN(memory_end);
-	pages = last_pfn - first_pfn;
-
-	/*
-	 * Partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	start_pfn = PFN_UP(__pa(_end));
-
-	/*
-	 * Find a proper area for the bootmem bitmap. After this
-	 * bootstrap step all allocations (until the page allocator
-	 * is intact) must be done via bootmem_alloc().
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
-					 first_pfn,
-					 last_pfn);
-        /*
-         * Round it up.
-         */
-        bootmap_size = PFN_PHYS(PFN_UP(bootmap_size));
-
-	/*
-	 * Register fully available RAM pages with the bootmem allocator.
-	 */
-	free_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn), PFN_PHYS(pages));
-
-	/*
-	 * Reserve all kernel sections + bootmem bitmap + a guard page.
-	 */
-	reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn),
-		        (PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE) - PFN_PHYS(first_pfn));
-
-	/*
-	 * Reserve platform dependent sections
-	 */
-	platform_reserve();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (LOADER_TYPE && INITRD_START) {
-		if (INITRD_START + INITRD_SIZE <= (PFN_PHYS(last_pfn))) {
-		        reserve_bootmem_node(NODE_DATA(0), INITRD_START + __MEMORY_START, INITRD_SIZE);
-
-			initrd_start = (long) INITRD_START + PAGE_OFFSET + __MEMORY_START;
-			initrd_end = initrd_start + INITRD_SIZE;
-		} else {
-			printk("initrd extends beyond end of memory "
-			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-				    (long) INITRD_START + INITRD_SIZE,
-				    PFN_PHYS(last_pfn));
-			initrd_start = 0;
-		}
-	}
-#endif
-
-	/*
-	 * Claim all RAM, ROM, and I/O resources.
-	 */
-
-	/* Kernel RAM */
-	request_resource(&iomem_resource, &code_resource);
-	request_resource(&iomem_resource, &data_resource);
-
-	/* Other KRAM space */
-	for (i = 0; i < STANDARD_KRAM_RESOURCES - 2; i++)
-		request_resource(&iomem_resource,
-				 &platform_parms.kram_res_p[i]);
-
-	/* XRAM space */
-	for (i = 0; i < STANDARD_XRAM_RESOURCES; i++)
-		request_resource(&iomem_resource,
-				 &platform_parms.xram_res_p[i]);
-
-	/* ROM space */
-	for (i = 0; i < STANDARD_ROM_RESOURCES; i++)
-		request_resource(&iomem_resource,
-				 &platform_parms.rom_res_p[i]);
-
-	/* I/O space */
-	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
-		request_resource(&ioport_resource,
-				 &platform_parms.io_res_p[i]);
-
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-	printk("Hardware FPU: %s\n", fpu_in_use ? "enabled" : "disabled");
-
-	paging_init();
-}
-
-void __xchg_called_with_bad_pointer(void)
-{
-	printk(KERN_EMERG "xchg() called with bad pointer !\n");
-}
-
-static struct cpu cpu[1];
-
-static int __init topology_init(void)
-{
-	return register_cpu(cpu, 0);
-}
-
-subsys_initcall(topology_init);
-
-/*
- *	Get CPU information
- */
-static const char *cpu_name[] = {
-	[CPU_SH5_101]	= "SH5-101",
-	[CPU_SH5_103]	= "SH5-103",
-	[CPU_SH_NONE]	= "Unknown",
-};
-
-const char *get_cpu_subtype(void)
-{
-	return cpu_name[boot_cpu_data.type];
-}
-
-#ifdef CONFIG_PROC_FS
-static int show_cpuinfo(struct seq_file *m,void *v)
-{
-	unsigned int cpu = smp_processor_id();
-
-	if (!cpu)
-		seq_printf(m, "machine\t\t: %s\n", get_system_type());
-
-	seq_printf(m, "processor\t: %d\n", cpu);
-	seq_printf(m, "cpu family\t: SH-5\n");
-	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype());
-
-	seq_printf(m, "icache size\t: %dK-bytes\n",
-		   (boot_cpu_data.icache.ways *
-		    boot_cpu_data.icache.sets *
-		    boot_cpu_data.icache.linesz) >> 10);
-	seq_printf(m, "dcache size\t: %dK-bytes\n",
-		   (boot_cpu_data.dcache.ways *
-		    boot_cpu_data.dcache.sets *
-		    boot_cpu_data.dcache.linesz) >> 10);
-	seq_printf(m, "itlb entries\t: %d\n", boot_cpu_data.itlb.entries);
-	seq_printf(m, "dtlb entries\t: %d\n", boot_cpu_data.dtlb.entries);
-
-#define PRINT_CLOCK(name, value) \
-	seq_printf(m, name " clock\t: %d.%02dMHz\n", \
-		     ((value) / 1000000), ((value) % 1000000)/10000)
-
-	PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock);
-	PRINT_CLOCK("bus", boot_cpu_data.bus_clock);
-	PRINT_CLOCK("module", boot_cpu_data.module_clock);
-
-        seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
-		     (loops_per_jiffy*HZ+2500)/500000,
-		     ((loops_per_jiffy*HZ+2500)/5000) % 100);
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return (void*)(*pos == 0);
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	return NULL;
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh64/kernel/time.c b/arch/sh64/kernel/time.c
deleted file mode 100644
index d1a9b5b078b..00000000000
--- a/arch/sh64/kernel/time.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/time.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- * Copyright (C) 2003  Richard Curnow
- *
- *    Original TMU/RTC code taken from sh version.
- *    Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- *      Some code taken from i386 version.
- *      Copyright (C) 1991, 1992, 1995  Linus Torvalds
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <asm/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/hardware.h>
-
-#define TMU_TOCR_INIT	0x00
-#define TMU0_TCR_INIT	0x0020
-#define TMU_TSTR_INIT	1
-#define TMU_TSTR_OFF	0
-
-/* Real Time Clock */
-#define	RTC_BLOCK_OFF	0x01040000
-#define RTC_BASE	PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
-#define RTC_RCR1_CIE	0x10	/* Carry Interrupt Enable */
-#define RTC_RCR1	(rtc_base + 0x38)
-
-/* Clock, Power and Reset Controller */
-#define	CPRC_BLOCK_OFF	0x01010000
-#define CPRC_BASE	PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
-
-#define FRQCR		(cprc_base+0x0)
-#define WTCSR		(cprc_base+0x0018)
-#define STBCR		(cprc_base+0x0030)
-
-/* Time Management Unit */
-#define	TMU_BLOCK_OFF	0x01020000
-#define TMU_BASE	PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-#define TMU0_BASE	tmu_base + 0x8 + (0xc * 0x0)
-#define TMU1_BASE	tmu_base + 0x8 + (0xc * 0x1)
-#define TMU2_BASE	tmu_base + 0x8 + (0xc * 0x2)
-
-#define TMU_TOCR	tmu_base+0x0	/* Byte access */
-#define TMU_TSTR	tmu_base+0x4	/* Byte access */
-
-#define TMU0_TCOR	TMU0_BASE+0x0	/* Long access */
-#define TMU0_TCNT	TMU0_BASE+0x4	/* Long access */
-#define TMU0_TCR	TMU0_BASE+0x8	/* Word access */
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-static unsigned long tmu_base, rtc_base;
-unsigned long cprc_base;
-
-/* Variables to allow interpolation of time of day to resolution better than a
- * jiffy. */
-
-/* This is effectively protected by xtime_lock */
-static unsigned long ctc_last_interrupt;
-static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
-
-#define CTC_JIFFY_SCALE_SHIFT 40
-
-/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
-static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
-
-/* Estimate number of microseconds that have elapsed since the last timer tick,
-   by scaling the delta that has occurred in the CTC register.
-
-   WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
-   the CPU clock rate.  If the CPU sleeps, the CTC stops counting.  Bear this
-   in mind if enabling SLEEP_WORKS in process.c.  In that case, this algorithm
-   probably needs to use TMU.TCNT0 instead.  This will work even if the CPU is
-   sleeping, though will be coarser.
-
-   FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
-   is running or if the freq or tick arguments of adjtimex are modified after
-   we have calibrated the scaling factor?  This will result in either a jump at
-   the end of a tick period, or a wrap backwards at the start of the next one,
-   if the application is reading the time of day often enough.  I think we
-   ought to do better than this.  For this reason, usecs_per_jiffy is left
-   separated out in the calculation below.  This allows some future hook into
-   the adjtime-related stuff in kernel/timer.c to remove this hazard.
-
-*/
-
-static unsigned long usecs_since_tick(void)
-{
-	unsigned long long current_ctc;
-	long ctc_ticks_since_interrupt;
-	unsigned long long ull_ctc_ticks_since_interrupt;
-	unsigned long result;
-
-	unsigned long long mul1_out;
-	unsigned long long mul1_out_high;
-	unsigned long long mul2_out_low, mul2_out_high;
-
-	/* Read CTC register */
-	asm ("getcon cr62, %0" : "=r" (current_ctc));
-	/* Note, the CTC counts down on each CPU clock, not up.
-	   Note(2), use long type to get correct wraparound arithmetic when
-	   the counter crosses zero. */
-	ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
-	ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
-
-	/* Inline assembly to do 32x32x32->64 multiplier */
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul1_out) :
-	     "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
-
-	mul1_out_high = mul1_out >> 32;
-
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul2_out_low) :
-	     "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
-
-#if 1
-	asm volatile ("mulu.l %1, %2, %0" :
-	     "=r" (mul2_out_high) :
-	     "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
-#endif
-
-	result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
-
-	return result;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = usecs_since_tick();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= 1000 * usecs_since_tick();
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-
-	return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
-	tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
-	tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
-	return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static inline void do_timer_interrupt(void)
-{
-	unsigned long long current_ctc;
-	asm ("getcon cr62, %0" : "=r" (current_ctc));
-	ctc_last_interrupt = (unsigned long) current_ctc;
-
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-
-#ifdef CONFIG_HEARTBEAT
-	{
-		extern void heartbeat(void);
-
-		heartbeat();
-	}
-#endif
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (rtc_sh_set_time(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned long timer_status;
-
-	/* Clear UNF bit */
-	timer_status = ctrl_inw(TMU0_TCR);
-	timer_status &= ~0x100;
-	ctrl_outw(timer_status, TMU0_TCR);
-
-	/*
-	 * Here we are in the timer irq handler. We just have irqs locally
-	 * disabled but we don't know if the timer_bh is running on the other
-	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
-	 * the irq version of write_lock because as just said we have irq
-	 * locally disabled. -arca
-	 */
-	write_lock(&xtime_lock);
-	do_timer_interrupt();
-	write_unlock(&xtime_lock);
-
-	return IRQ_HANDLED;
-}
-
-
-static __init unsigned int get_cpu_hz(void)
-{
-	unsigned int count;
-	unsigned long __dummy;
-	unsigned long ctc_val_init, ctc_val;
-
-	/*
-	** Regardless the toolchain, force the compiler to use the
-	** arbitrary register r3 as a clock tick counter.
-	** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
-	*/
-	register unsigned long long  __rtc_irq_flag __asm__ ("r3");
-
-	local_irq_enable();
-	do {} while (ctrl_inb(rtc_base) != 0);
-	ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
-
-	/*
-	 * r3 is arbitrary. CDC does not support "=z".
-	 */
-	ctc_val_init = 0xffffffff;
-	ctc_val = ctc_val_init;
-
-	asm volatile("gettr	tr0, %1\n\t"
-		     "putcon	%0, " __CTC "\n\t"
-		     "and	%2, r63, %2\n\t"
-		     "pta	$+4, tr0\n\t"
-		     "beq/l	%2, r63, tr0\n\t"
-		     "ptabs	%1, tr0\n\t"
-		     "getcon	" __CTC ", %0\n\t"
-		: "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
-		: "0" (0));
-	local_irq_disable();
-	/*
-	 * SH-3:
-	 * CPU clock = 4 stages * loop
-	 * tst    rm,rm      if id ex
-	 * bt/s   1b            if id ex
-	 * add    #1,rd            if id ex
-         *                            (if) pipe line stole
-	 * tst    rm,rm                  if id ex
-         * ....
-	 *
-	 *
-	 * SH-4:
-	 * CPU clock = 6 stages * loop
-	 * I don't know why.
-         * ....
-	 *
-	 * SH-5:
-	 * Use CTC register to count.  This approach returns the right value
-	 * even if the I-cache is disabled (e.g. whilst debugging.)
-	 *
-	 */
-
-	count = ctc_val_init - ctc_val; /* CTC counts down */
-
-#if defined (CONFIG_SH_SIMULATOR)
-	/*
-	 * Let's pretend we are a 5MHz SH-5 to avoid a too
-	 * little timer interval. Also to keep delay
-	 * calibration within a reasonable time.
-	 */
-	return 5000000;
-#else
-	/*
-	 * This really is count by the number of clock cycles
-         * by the ratio between a complete R64CNT
-         * wrap-around (128) and CUI interrupt being raised (64).
-	 */
-	return count*2;
-#endif
-}
-
-static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-
-	ctrl_outb(0, RTC_RCR1);	/* Disable Carry Interrupts */
-	regs->regs[3] = 1;	/* Using r3 */
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "timer",
-};
-static struct irqaction irq1  = {
-	.handler = sh64_rtc_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "rtc",
-};
-
-void __init time_init(void)
-{
-	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
-	unsigned long interval;
-	unsigned long frqcr, ifc, pfc;
-	static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
-#define bfc_table ifc_table	/* Same */
-#define pfc_table ifc_table	/* Same */
-
-	tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
-	if (!tmu_base) {
-		panic("Unable to remap TMU\n");
-	}
-
-	rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
-	if (!rtc_base) {
-		panic("Unable to remap RTC\n");
-	}
-
-	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
-	if (!cprc_base) {
-		panic("Unable to remap CPRC\n");
-	}
-
-	rtc_sh_get_time(&xtime);
-
-	setup_irq(TIMER_IRQ, &irq0);
-	setup_irq(RTC_IRQ, &irq1);
-
-	/* Check how fast it is.. */
-	cpu_clock = get_cpu_hz();
-
-	/* Note careful order of operations to maintain reasonable precision and avoid overflow. */
-	scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
-
-	free_irq(RTC_IRQ, NULL);
-
-	printk("CPU clock: %d.%02dMHz\n",
-	       (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
-	{
-		unsigned short bfc;
-		frqcr = ctrl_inl(FRQCR);
-		ifc  = ifc_table[(frqcr>> 6) & 0x0007];
-		bfc  = bfc_table[(frqcr>> 3) & 0x0007];
-		pfc  = pfc_table[(frqcr>> 12) & 0x0007];
-		master_clock = cpu_clock * ifc;
-		bus_clock = master_clock/bfc;
-	}
-
-	printk("Bus clock: %d.%02dMHz\n",
-	       (bus_clock/1000000), (bus_clock % 1000000)/10000);
-	module_clock = master_clock/pfc;
-	printk("Module clock: %d.%02dMHz\n",
-	       (module_clock/1000000), (module_clock % 1000000)/10000);
-	interval = (module_clock/(HZ*4));
-
-	printk("Interval = %ld\n", interval);
-
-	current_cpu_data.cpu_clock    = cpu_clock;
-	current_cpu_data.master_clock = master_clock;
-	current_cpu_data.bus_clock    = bus_clock;
-	current_cpu_data.module_clock = module_clock;
-
-	/* Start TMU0 */
-	ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
-	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-	ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
-	ctrl_outl(interval, TMU0_TCOR);
-	ctrl_outl(interval, TMU0_TCNT);
-	ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-}
-
-void enter_deep_standby(void)
-{
-	/* Disable watchdog timer */
-	ctrl_outl(0xa5000000, WTCSR);
-	/* Configure deep standby on sleep */
-	ctrl_outl(0x03, STBCR);
-
-#ifdef CONFIG_SH_ALPHANUMERIC
-	{
-		extern void mach_alphanum(int position, unsigned char value);
-		extern void mach_alphanum_brightness(int setting);
-		char halted[] = "Halted. ";
-		int i;
-		mach_alphanum_brightness(6); /* dimmest setting above off */
-		for (i=0; i<8; i++) {
-			mach_alphanum(i, halted[i]);
-		}
-		asm __volatile__ ("synco");
-	}
-#endif
-
-	asm __volatile__ ("sleep");
-	asm __volatile__ ("synci");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	asm __volatile__ ("nop");
-	panic("Unexpected wakeup!\n");
-}
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		/* RTC base, filled in by rtc_init */
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		/* Period IRQ */
-		.start	= IRQ_PRI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* Carry IRQ */
-		.start	= IRQ_CUI,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		/* Alarm IRQ */
-		.start	= IRQ_ATI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "sh-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-	.resource	= rtc_resources,
-};
-
-static int __init rtc_init(void)
-{
-	rtc_resources[0].start	= rtc_base;
-	rtc_resources[0].end	= rtc_resources[0].start + 0x58 - 1;
-
-	return platform_device_register(&rtc_device);
-}
-device_initcall(rtc_init);