sh: add romImage MMCIF boot for sh7724 and Ecovec V2

This patch is V2 of the MMCIF romImage boot support
for sh7724 and the Ecovec board. With this patch
applied and CONFIG_ROMIMAGE_MMCIF selected the
romImage kernel image can be written to a MMC card
and booted directly by the sh7724 cpu.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 48 insertions, 0 deletions

diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index fbbf550cc52..4c27b68789b 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -9,6 +9,7 @@
  * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
  * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
  * MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
  */
 
 /* Pin Function Controller:
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 267e24112d8..08fb42269ec 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -1 +1,11 @@
+#ifdef __ASSEMBLY__
+
 /* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1c8787ecb1c..1dcf5e6c8d8 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* EcoVec board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,28 @@
 	.align 2
 1 :	.long 0xa8000000
 2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA		0xa4050158
+#define PGDR		0xa405012c
+
+extern inline void mmcif_update_progress(int nr)
+{
+	/* disable Hi-Z for LED pins */
+	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+	/* update progress on LED4, LED5, LED6 and LED7 */
+	__raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index a110823f2bd..976256a323f 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* kfr2r09 board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,11 @@
 	.align 2
 1:	.long 0xa8000000
 2:
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */