sh: rework ipr code

This patch reworks the ipr code by grouping the offset array together
with the ipr_data structure in a new data structure called ipr_desc.
This new structure also contains the name of the controller in struct
irq_chip. The idea behind putting struct irq_chip in there is that we
can use offsetof() to locate the base addresses in the irq_chip
callbacks. This strategy has much in common with the recently merged
intc2 code.

One logic change has been made - the original ipr code enabled the
interrupts by default but with this patch they are all disabled by
default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 23 insertions, 36 deletions

diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
index e4c63a48296..c3d12590e5d 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/se/7751/irq.c
@@ -14,44 +14,31 @@
 #include <asm/irq.h>
 #include <asm/se7751.h>
 
-static struct ipr_data se7751_ipr_map[] = {
-  /* Leave old Solution Engine code in for reference. */
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
-	/*
-	 * Super I/O (Just mimic PC):
-	 *  1: keyboard
-	 *  3: serial 0
-	 *  4: serial 1
-	 *  5: printer
-	 *  6: floppy
-	 *  8: rtc
-	 * 12: mouse
-	 * 14: ide0
-	 */
-	{ 14, BCR_ILCRA, 2, 0x0f-14 },
-	{ 12, BCR_ILCRA, 1, 0x0f-12 },
-	{  8, BCR_ILCRB, 1, 0x0f- 8 },
-	{  6, BCR_ILCRC, 3, 0x0f- 6 },
-	{  5, BCR_ILCRC, 2, 0x0f- 5 },
-	{  4, BCR_ILCRC, 1, 0x0f- 4 },
-	{  3, BCR_ILCRC, 0, 0x0f- 3 },
-	{  1, BCR_ILCRD, 3, 0x0f- 1 },
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
 
-	{ 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
 
-	{  0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
-	{ 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
-	{  9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
-	{  7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
 
-	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
-	{  2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
-#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
-	{ 13, BCR_ILCRD, 3, 2 },
-	/* Add additional entries here as drivers are added and tested. */
-#endif
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
 };
 
 /*
@@ -59,5 +46,5 @@ static struct ipr_data se7751_ipr_map[] = {
  */
 void __init init_7751se_IRQ(void)
 {
-	make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map));
+	register_ipr_controller(&ipr_irq_desc);
 }