diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-08-02 11:45:42 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-08-02 11:45:42 -0700 |
| commit | 0a276d1675bc1b8de3ba269ba64b8f3e288d8309 (patch) | |
| tree | ff552f58874b245f5962487ef53ce27ebcda5857 /arch/sh/boards/board-magicpanelr2.c | |
| parent | 25aa6a7ae46c6a041c46a2d314b9ab7c4f2baa41 (diff) | |
| parent | 08298f0612e5e369d1da89b92cac5d2c71ddb9af (diff) | |
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
Pull SuperH fixes from Paul Mundt.
* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
sh: explicitly include sh_dma.h in setup-sh7722.c
sh: ecovec: care CN5 VBUS if USB host mode
sh: sh7724: fixup renesas_usbhs clock settings
sh: intc: initial irqdomain support.
sh: pfc: Fix up init ordering mess.
serial: sh-sci: fix compilation breakage, when DMA is enabled
dmaengine: shdma: restore partial transfer calculation
sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
sh: Fix up recursive fault in oops with unset TTB.
sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
sh: select the fixed regulator driver on several boards
sh: ecovec: switch MMC power control to regulators
sh: add fixed voltage regulators to se7724
sh: add fixed voltage regulators to sdk7786
sh: add fixed voltage regulators to rsk
sh: add fixed voltage regulators to migor
sh: add fixed voltage regulators to kfr2r09
sh: add fixed voltage regulators to ap325rxa
sh: add fixed voltage regulators to sh7757lcr
sh: add fixed voltage regulators to sh2007
...
Diffstat (limited to 'arch/sh/boards/board-magicpanelr2.c')
| -rw-r--r-- | arch/sh/boards/board-magicpanelr2.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 90568f9de3a..20500858b56 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,6 +14,8 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -24,6 +26,12 @@ #include <asm/heartbeat.h> #include <cpu/sh7720.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ @@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); |