[S390] move sie code to entry.S

The entry to / exit from sie has subtle dependencies to the first level
interrupt handler. Move the sie assembler code to entry64.S and replace
the SIE_HOOK callback with a test and the new _TIF_SIE bit.
In addition this patch fixes several problems in regard to the check for
the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing
the interrupt handler and it only modified the instruction address if it
pointed directly to the sie instruction. In both cases it could miss
a TIF bit that normally would cause an exit from the guest and would
reenter the guest context.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

2 files changed, 1 insertions, 99 deletions

diff --git a/arch/s390/kvm/Makefile b/arch/s390/kvm/Makefile
index 860d26514c0..3975722bb19 100644
--- a/arch/s390/kvm/Makefile
+++ b/arch/s390/kvm/Makefile
@@ -10,5 +10,5 @@ common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o)
 
 ccflags-y := -Ivirt/kvm -Iarch/s390/kvm
 
-kvm-objs := $(common-objs) kvm-s390.o sie64a.o intercept.o interrupt.o priv.o sigp.o diag.o
+kvm-objs := $(common-objs) kvm-s390.o intercept.o interrupt.o priv.o sigp.o diag.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S
deleted file mode 100644
index 5faa1b1b23f..00000000000
--- a/arch/s390/kvm/sie64a.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * sie64a.S - low level sie call
- *
- * Copyright IBM Corp. 2008,2010
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2 only)
- * as published by the Free Software Foundation.
- *
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- *		 Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
- */
-
-#include <linux/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/setup.h>
-#include <asm/asm-offsets.h>
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-
-_TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING)
-
-/*
- * offsets into stackframe
- * SP_	= offsets into stack sie64 is called with
- * SPI_ = offsets into irq stack
- */
-SP_GREGS = __SF_EMPTY
-SP_HOOK  = __SF_EMPTY+8
-SP_GPP	 = __SF_EMPTY+16
-SPI_PSW  = STACK_FRAME_OVERHEAD + __PT_PSW
-
-
-	.macro SPP newpp
-	tm	__LC_MACHINE_FLAGS+6,0x20	# MACHINE_FLAG_SPP
-	jz	0f
-	.insn	s,0xb2800000,\newpp
-0:
-	.endm
-
-sie_irq_handler:
-	SPP	__LC_CMF_HPP			# set host id
-	larl	%r2,sie_inst
-	clg	%r2,SPI_PSW+8(0,%r15)		# intercepted sie
-	jne	1f
-	xc	__LC_SIE_HOOK(8),__LC_SIE_HOOK
-	lg	%r2,__LC_THREAD_INFO		# pointer thread_info struct
-	tm	__TI_flags+7(%r2),_TIF_EXIT_SIE
-	jz	0f
-	larl	%r2,sie_exit			# work pending, leave sie
-	stg	%r2,SPI_PSW+8(0,%r15)
-	br	%r14
-0:	larl	%r2,sie_reenter			# re-enter with guest id
-	stg	%r2,SPI_PSW+8(0,%r15)
-1:	br	%r14
-
-/*
- * sie64a calling convention:
- * %r2 pointer to sie control block
- * %r3 guest register save area
- */
-	.globl	sie64a
-sie64a:
-	stg	%r3,SP_GREGS(%r15)		# save guest register save area
-	stmg	%r6,%r14,__SF_GPRS(%r15)	# save registers on entry
-	lgr	%r14,%r2			# pointer to sie control block
-	larl	%r5,sie_irq_handler
-	stg	%r2,SP_GPP(%r15)
-	stg	%r5,SP_HOOK(%r15)		# save hook target
-	lmg	%r0,%r13,0(%r3)			# load guest gprs 0-13
-sie_reenter:
-	mvc	__LC_SIE_HOOK(8),SP_HOOK(%r15)
-	SPP	SP_GPP(%r15)			# set guest id
-sie_inst:
-	sie	0(%r14)
-	xc	__LC_SIE_HOOK(8),__LC_SIE_HOOK
-	SPP	__LC_CMF_HPP			# set host id
-sie_exit:
-	lg	%r14,SP_GREGS(%r15)
-	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
-	lghi	%r2,0
-	lmg	%r6,%r14,__SF_GPRS(%r15)
-	br	%r14
-
-sie_err:
-	xc	__LC_SIE_HOOK(8),__LC_SIE_HOOK
-	SPP	__LC_CMF_HPP			# set host id
-	lg	%r14,SP_GREGS(%r15)
-	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
-	lghi	%r2,-EFAULT
-	lmg	%r6,%r14,__SF_GPRS(%r15)
-	br	%r14
-
-	.section __ex_table,"a"
-	.quad	sie_inst,sie_err
-	.quad	sie_exit,sie_err
-	.quad	sie_reenter,sie_err
-	.previous