[S390] Whitespace cleanup.

Huge s390 assembly files whitespace cleanup.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 312 insertions, 312 deletions

diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 0f1db268a8a..0cf59bb7a85 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -36,449 +36,449 @@
 #endif
 
 #ifndef CONFIG_IPL
-        .org   0
-        .long  0x00080000,0x80000000+startup   # Just a restart PSW
+	.org   0
+	.long  0x00080000,0x80000000+startup	# Just a restart PSW
 #else
 #ifdef CONFIG_IPL_TAPE
 #define IPL_BS 1024
-        .org   0
-        .long  0x00080000,0x80000000+iplstart  # The first 24 bytes are loaded
-        .long  0x27000000,0x60000001           # by ipl to addresses 0-23.
-        .long  0x02000000,0x20000000+IPL_BS    # (a PSW and two CCWs).
-        .long  0x00000000,0x00000000           # external old psw
-        .long  0x00000000,0x00000000           # svc old psw
-        .long  0x00000000,0x00000000           # program check old psw
-        .long  0x00000000,0x00000000           # machine check old psw
-        .long  0x00000000,0x00000000           # io old psw
-        .long  0x00000000,0x00000000
-        .long  0x00000000,0x00000000
-        .long  0x00000000,0x00000000
-        .long  0x000a0000,0x00000058           # external new psw
-        .long  0x000a0000,0x00000060           # svc new psw
-        .long  0x000a0000,0x00000068           # program check new psw
-        .long  0x000a0000,0x00000070           # machine check new psw
-        .long  0x00080000,0x80000000+.Lioint   # io new psw
+	.org   0
+	.long  0x00080000,0x80000000+iplstart	# The first 24 bytes are loaded
+	.long  0x27000000,0x60000001		# by ipl to addresses 0-23.
+	.long  0x02000000,0x20000000+IPL_BS	# (a PSW and two CCWs).
+	.long  0x00000000,0x00000000		# external old psw
+	.long  0x00000000,0x00000000		# svc old psw
+	.long  0x00000000,0x00000000		# program check old psw
+	.long  0x00000000,0x00000000		# machine check old psw
+	.long  0x00000000,0x00000000		# io old psw
+	.long  0x00000000,0x00000000
+	.long  0x00000000,0x00000000
+	.long  0x00000000,0x00000000
+	.long  0x000a0000,0x00000058		# external new psw
+	.long  0x000a0000,0x00000060		# svc new psw
+	.long  0x000a0000,0x00000068		# program check new psw
+	.long  0x000a0000,0x00000070		# machine check new psw
+	.long  0x00080000,0x80000000+.Lioint	# io new psw
 
-        .org   0x100
+	.org   0x100
 #
 # subroutine for loading from tape
-# Paramters:	
+# Paramters:
 #  R1 = device number
 #  R2 = load address
-.Lloader:	
-        st    %r14,.Lldret
-        la    %r3,.Lorbread                    # r3 = address of orb 
-	la    %r5,.Lirb                        # r5 = address of irb
-        st    %r2,.Lccwread+4                  # initialize CCW data addresses
-        lctl  %c6,%c6,.Lcr6               
-        slr   %r2,%r2
+.Lloader:
+	st	%r14,.Lldret
+	la	%r3,.Lorbread		# r3 = address of orb
+	la	%r5,.Lirb		# r5 = address of irb
+	st	%r2,.Lccwread+4 	# initialize CCW data addresses
+	lctl	%c6,%c6,.Lcr6
+	slr	%r2,%r2
 .Lldlp:
-        la    %r6,3                            # 3 retries
+	la	%r6,3			# 3 retries
 .Lssch:
-        ssch  0(%r3)                           # load chunk of IPL_BS bytes
-        bnz   .Llderr
+	ssch	0(%r3)			# load chunk of IPL_BS bytes
+	bnz	.Llderr
 .Lw4end:
-        bas   %r14,.Lwait4io
-        tm    8(%r5),0x82                      # do we have a problem ?
-        bnz   .Lrecov
-        slr   %r7,%r7
-        icm   %r7,3,10(%r5)                    # get residual count
-        lcr   %r7,%r7
-        la    %r7,IPL_BS(%r7)                  # IPL_BS-residual=#bytes read
-        ar    %r2,%r7                          # add to total size
-        tm    8(%r5),0x01                      # found a tape mark ?
-        bnz   .Ldone
-        l     %r0,.Lccwread+4                  # update CCW data addresses
-        ar    %r0,%r7
-        st    %r0,.Lccwread+4                
-        b     .Lldlp
+	bas	%r14,.Lwait4io
+	tm	8(%r5),0x82		# do we have a problem ?
+	bnz	.Lrecov
+	slr	%r7,%r7
+	icm	%r7,3,10(%r5)		# get residual count
+	lcr	%r7,%r7
+	la	%r7,IPL_BS(%r7) 	# IPL_BS-residual=#bytes read
+	ar	%r2,%r7 		# add to total size
+	tm	8(%r5),0x01		# found a tape mark ?
+	bnz	.Ldone
+	l	%r0,.Lccwread+4 	# update CCW data addresses
+	ar	%r0,%r7
+	st	%r0,.Lccwread+4
+	b	.Lldlp
 .Ldone:
-        l     %r14,.Lldret
-        br    %r14                             # r2 contains the total size
+	l	%r14,.Lldret
+	br	%r14			# r2 contains the total size
 .Lrecov:
-        bas   %r14,.Lsense                     # do the sensing
-        bct   %r6,.Lssch                       # dec. retry count & branch
-        b     .Llderr
+	bas	%r14,.Lsense		# do the sensing
+	bct	%r6,.Lssch		# dec. retry count & branch
+	b	.Llderr
 #
 # Sense subroutine
 #
 .Lsense:
-        st    %r14,.Lsnsret
-        la    %r7,.Lorbsense              
-        ssch  0(%r7)                           # start sense command
-        bnz   .Llderr
-        bas   %r14,.Lwait4io
-        l     %r14,.Lsnsret
-        tm    8(%r5),0x82                      # do we have a problem ?
-        bnz   .Llderr
-        br    %r14
+	st	%r14,.Lsnsret
+	la	%r7,.Lorbsense
+	ssch	0(%r7)			# start sense command
+	bnz	.Llderr
+	bas	%r14,.Lwait4io
+	l	%r14,.Lsnsret
+	tm	8(%r5),0x82		# do we have a problem ?
+	bnz	.Llderr
+	br	%r14
 #
 # Wait for interrupt subroutine
 #
 .Lwait4io:
-        lpsw  .Lwaitpsw                 
+	lpsw	.Lwaitpsw
 .Lioint:
-        c     %r1,0xb8                         # compare subchannel number
-        bne   .Lwait4io
-        tsch  0(%r5)
-        slr   %r0,%r0
-        tm    8(%r5),0x82                      # do we have a problem ?
-        bnz   .Lwtexit
-        tm    8(%r5),0x04                      # got device end ?
-        bz    .Lwait4io
+	c	%r1,0xb8		# compare subchannel number
+	bne	.Lwait4io
+	tsch	0(%r5)
+	slr	%r0,%r0
+	tm	8(%r5),0x82		# do we have a problem ?
+	bnz	.Lwtexit
+	tm	8(%r5),0x04		# got device end ?
+	bz	.Lwait4io
 .Lwtexit:
-        br    %r14
+	br	%r14
 .Llderr:
-        lpsw  .Lcrash              
+	lpsw	.Lcrash
 
-        .align 8
+	.align	8
 .Lorbread:
-	.long  0x00000000,0x0080ff00,.Lccwread
-        .align 8
+	.long	0x00000000,0x0080ff00,.Lccwread
+	.align	8
 .Lorbsense:
-        .long  0x00000000,0x0080ff00,.Lccwsense
-        .align 8
+	.long	0x00000000,0x0080ff00,.Lccwsense
+	.align	8
 .Lccwread:
-        .long  0x02200000+IPL_BS,0x00000000
+	.long	0x02200000+IPL_BS,0x00000000
 .Lccwsense:
-        .long  0x04200001,0x00000000
+	.long	0x04200001,0x00000000
 .Lwaitpsw:
-	.long  0x020a0000,0x80000000+.Lioint
+	.long	0x020a0000,0x80000000+.Lioint
 
-.Lirb:	.long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6:  .long  0xff000000
-        .align 8
-.Lcrash:.long  0x000a0000,0x00000000
-.Lldret:.long  0
+.Lirb:	.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+.Lcr6:	.long	0xff000000
+	.align	8
+.Lcrash:.long	0x000a0000,0x00000000
+.Lldret:.long	0
 .Lsnsret: .long 0
-#endif  /* CONFIG_IPL_TAPE */
+#endif	/* CONFIG_IPL_TAPE */
 
 #ifdef CONFIG_IPL_VM
-#define IPL_BS 0x730
-        .org   0
-        .long  0x00080000,0x80000000+iplstart  # The first 24 bytes are loaded
-        .long  0x02000018,0x60000050           # by ipl to addresses 0-23.
-        .long  0x02000068,0x60000050           # (a PSW and two CCWs).
-        .fill  80-24,1,0x40                    # bytes 24-79 are discarded !!
-        .long  0x020000f0,0x60000050           # The next 160 byte are loaded
-        .long  0x02000140,0x60000050           # to addresses 0x18-0xb7
-        .long  0x02000190,0x60000050           # They form the continuation
-        .long  0x020001e0,0x60000050           # of the CCW program started
-        .long  0x02000230,0x60000050           # by ipl and load the range
-        .long  0x02000280,0x60000050           # 0x0f0-0x730 from the image
-        .long  0x020002d0,0x60000050           # to the range 0x0f0-0x730
-        .long  0x02000320,0x60000050           # in memory. At the end of
-        .long  0x02000370,0x60000050           # the channel program the PSW
-        .long  0x020003c0,0x60000050           # at location 0 is loaded.
-        .long  0x02000410,0x60000050           # Initial processing starts
-        .long  0x02000460,0x60000050           # at 0xf0 = iplstart.
-        .long  0x020004b0,0x60000050
-        .long  0x02000500,0x60000050
-        .long  0x02000550,0x60000050
-        .long  0x020005a0,0x60000050
-        .long  0x020005f0,0x60000050
-        .long  0x02000640,0x60000050
-        .long  0x02000690,0x60000050
-        .long  0x020006e0,0x20000050
+#define IPL_BS	0x730
+	.org	0
+	.long	0x00080000,0x80000000+iplstart	# The first 24 bytes are loaded
+	.long	0x02000018,0x60000050		# by ipl to addresses 0-23.
+	.long	0x02000068,0x60000050		# (a PSW and two CCWs).
+	.fill	80-24,1,0x40			# bytes 24-79 are discarded !!
+	.long	0x020000f0,0x60000050		# The next 160 byte are loaded
+	.long	0x02000140,0x60000050		# to addresses 0x18-0xb7
+	.long	0x02000190,0x60000050		# They form the continuation
+	.long	0x020001e0,0x60000050		# of the CCW program started
+	.long	0x02000230,0x60000050		# by ipl and load the range
+	.long	0x02000280,0x60000050		# 0x0f0-0x730 from the image
+	.long	0x020002d0,0x60000050		# to the range 0x0f0-0x730
+	.long	0x02000320,0x60000050		# in memory. At the end of
+	.long	0x02000370,0x60000050		# the channel program the PSW
+	.long	0x020003c0,0x60000050		# at location 0 is loaded.
+	.long	0x02000410,0x60000050		# Initial processing starts
+	.long	0x02000460,0x60000050		# at 0xf0 = iplstart.
+	.long	0x020004b0,0x60000050
+	.long	0x02000500,0x60000050
+	.long	0x02000550,0x60000050
+	.long	0x020005a0,0x60000050
+	.long	0x020005f0,0x60000050
+	.long	0x02000640,0x60000050
+	.long	0x02000690,0x60000050
+	.long	0x020006e0,0x20000050
 
-        .org   0xf0
+	.org	0xf0
 #
 # subroutine for loading cards from the reader
 #
-.Lloader:	
-	la    %r3,.Lorb                        # r2 = address of orb into r2
-	la    %r5,.Lirb                        # r4 = address of irb
-        la    %r6,.Lccws              
-        la    %r7,20
+.Lloader:
+	la	%r3,.Lorb		# r2 = address of orb into r2
+	la	%r5,.Lirb		# r4 = address of irb
+	la	%r6,.Lccws
+	la	%r7,20
 .Linit:
-        st    %r2,4(%r6)                       # initialize CCW data addresses
-        la    %r2,0x50(%r2)
-        la    %r6,8(%r6)
-        bct   7,.Linit
+	st	%r2,4(%r6)		# initialize CCW data addresses
+	la	%r2,0x50(%r2)
+	la	%r6,8(%r6)
+	bct	7,.Linit
 
-        lctl  %c6,%c6,.Lcr6                    # set IO subclass mask
-	slr   %r2,%r2
+	lctl	%c6,%c6,.Lcr6		# set IO subclass mask
+	slr	%r2,%r2
 .Lldlp:
-        ssch  0(%r3)                           # load chunk of 1600 bytes
-        bnz   .Llderr
+	ssch	0(%r3)			# load chunk of 1600 bytes
+	bnz	.Llderr
 .Lwait4irq:
-        mvc   0x78(8),.Lnewpsw                 # set up IO interrupt psw
-        lpsw  .Lwaitpsw              
+	mvc	0x78(8),.Lnewpsw	# set up IO interrupt psw
+	lpsw	.Lwaitpsw
 .Lioint:
-        c     %r1,0xb8                         # compare subchannel number
-	bne   .Lwait4irq
-	tsch  0(%r5)
+	c	%r1,0xb8		# compare subchannel number
+	bne	.Lwait4irq
+	tsch	0(%r5)
 
-	slr   %r0,%r0
-	ic    %r0,8(%r5)                       # get device status
-	chi   %r0,8                            # channel end ?
-	be    .Lcont
-	chi   %r0,12                           # channel end + device end ?
-	be    .Lcont
+	slr	%r0,%r0
+	ic	%r0,8(%r5)		# get device status
+	chi	%r0,8			# channel end ?
+	be	.Lcont
+	chi	%r0,12			# channel end + device end ?
+	be	.Lcont
 
-        l     %r0,4(%r5)
-        s     %r0,8(%r3)                       # r0/8 = number of ccws executed
-        mhi   %r0,10                           # *10 = number of bytes in ccws
-        lh    %r3,10(%r5)                      # get residual count
-        sr    %r0,%r3                          # #ccws*80-residual=#bytes read
-	ar    %r2,%r0
-	
-        br    %r14                             # r2 contains the total size
+	l	%r0,4(%r5)
+	s	%r0,8(%r3)		# r0/8 = number of ccws executed
+	mhi	%r0,10			# *10 = number of bytes in ccws
+	lh	%r3,10(%r5)		# get residual count
+	sr	%r0,%r3 		# #ccws*80-residual=#bytes read
+	ar	%r2,%r0
+
+	br	%r14			# r2 contains the total size
 
 .Lcont:
-	ahi   %r2,0x640                        # add 0x640 to total size
-        la    %r6,.Lccws             
-        la    %r7,20
+	ahi	%r2,0x640		# add 0x640 to total size
+	la	%r6,.Lccws
+	la	%r7,20
 .Lincr:
-        l     %r0,4(%r6)                       # update CCW data addresses
-        ahi   %r0,0x640
-        st    %r0,4(%r6)
-        ahi   %r6,8
-        bct   7,.Lincr
+	l	%r0,4(%r6)		# update CCW data addresses
+	ahi	%r0,0x640
+	st	%r0,4(%r6)
+	ahi	%r6,8
+	bct	7,.Lincr
 
-        b     .Lldlp
+	b	.Lldlp
 .Llderr:
-        lpsw  .Lcrash              
+	lpsw	.Lcrash
 
-        .align 8
-.Lorb:	.long  0x00000000,0x0080ff00,.Lccws
-.Lirb:	.long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-.Lcr6:  .long  0xff000000
-.Lloadp:.long  0,0
-        .align 8
-.Lcrash:.long  0x000a0000,0x00000000
+	.align	8
+.Lorb:	.long	0x00000000,0x0080ff00,.Lccws
+.Lirb:	.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+.Lcr6:	.long	0xff000000
+.Lloadp:.long	0,0
+	.align	8
+.Lcrash:.long	0x000a0000,0x00000000
 .Lnewpsw:
-        .long  0x00080000,0x80000000+.Lioint
+	.long	0x00080000,0x80000000+.Lioint
 .Lwaitpsw:
-        .long  0x020a0000,0x80000000+.Lioint
+	.long	0x020a0000,0x80000000+.Lioint
 
-        .align 8
-.Lccws: .rept  19
-        .long  0x02600050,0x00000000
-        .endr
-        .long  0x02200050,0x00000000
-#endif  /* CONFIG_IPL_VM */
+	.align	8
+.Lccws: .rept	19
+	.long	0x02600050,0x00000000
+	.endr
+	.long	0x02200050,0x00000000
+#endif	/* CONFIG_IPL_VM */
 
 iplstart:
-        lh    %r1,0xb8                         # test if subchannel number
-        bct   %r1,.Lnoload                     #  is valid
-	l     %r1,0xb8                         # load ipl subchannel number
-        la    %r2,IPL_BS                       # load start address
-        bas   %r14,.Lloader                    # load rest of ipl image
-        l     %r12,.Lparm                      # pointer to parameter area
-        st    %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
+	lh	%r1,0xb8		# test if subchannel number
+	bct	%r1,.Lnoload		#  is valid
+	l	%r1,0xb8		# load ipl subchannel number
+	la	%r2,IPL_BS		# load start address
+	bas	%r14,.Lloader		# load rest of ipl image
+	l	%r12,.Lparm		# pointer to parameter area
+	st	%r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
 
 #
 # load parameter file from ipl device
 #
 .Lagain1:
-	l     %r2,.Linitrd		       # ramdisk loc. is temp
-        bas   %r14,.Lloader                    # load parameter file
-        ltr   %r2,%r2                          # got anything ?
-        bz    .Lnopf
-	chi   %r2,895
-	bnh   .Lnotrunc
-	la    %r2,895
+	l	%r2,.Linitrd		# ramdisk loc. is temp
+	bas	%r14,.Lloader		# load parameter file
+	ltr	%r2,%r2 		# got anything ?
+	bz	.Lnopf
+	chi	%r2,895
+	bnh	.Lnotrunc
+	la	%r2,895
 .Lnotrunc:
-	l     %r4,.Linitrd
-	clc   0(3,%r4),.L_hdr		       # if it is HDRx
-	bz    .Lagain1			       # skip dataset header
-	clc   0(3,%r4),.L_eof		       # if it is EOFx
-	bz    .Lagain1			       # skip dateset trailer
-        la    %r5,0(%r4,%r2)
-        lr    %r3,%r2
+	l	%r4,.Linitrd
+	clc	0(3,%r4),.L_hdr		# if it is HDRx
+	bz	.Lagain1		# skip dataset header
+	clc	0(3,%r4),.L_eof		# if it is EOFx
+	bz	.Lagain1		# skip dateset trailer
+	la	%r5,0(%r4,%r2)
+	lr	%r3,%r2
 .Lidebc:
-        tm    0(%r5),0x80                      # high order bit set ?
-        bo    .Ldocv                           #  yes -> convert from EBCDIC
-        ahi   %r5,-1
-        bct   %r3,.Lidebc
-        b     .Lnocv
+	tm	0(%r5),0x80		# high order bit set ?
+	bo	.Ldocv			#  yes -> convert from EBCDIC
+	ahi	%r5,-1
+	bct	%r3,.Lidebc
+	b	.Lnocv
 .Ldocv:
-        l     %r3,.Lcvtab
-        tr    0(256,%r4),0(%r3)                # convert parameters to ascii
-        tr    256(256,%r4),0(%r3)
-        tr    512(256,%r4),0(%r3)
-        tr    768(122,%r4),0(%r3)
-.Lnocv: la    %r3,COMMAND_LINE-PARMAREA(%r12)  # load adr. of command line
-	mvc   0(256,%r3),0(%r4)
-	mvc   256(256,%r3),256(%r4)
-	mvc   512(256,%r3),512(%r4)
-	mvc   768(122,%r3),768(%r4)
-        slr   %r0,%r0
-        b     .Lcntlp
+	l	%r3,.Lcvtab
+	tr	0(256,%r4),0(%r3)	# convert parameters to ascii
+	tr	256(256,%r4),0(%r3)
+	tr	512(256,%r4),0(%r3)
+	tr	768(122,%r4),0(%r3)
+.Lnocv: la	%r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
+	mvc	0(256,%r3),0(%r4)
+	mvc	256(256,%r3),256(%r4)
+	mvc	512(256,%r3),512(%r4)
+	mvc	768(122,%r3),768(%r4)
+	slr	%r0,%r0
+	b	.Lcntlp
 .Ldelspc:
-        ic    %r0,0(%r2,%r3)
-        chi   %r0,0x20                         # is it a space ?
-        be    .Lcntlp
-        ahi   %r2,1
-        b     .Leolp
+	ic	%r0,0(%r2,%r3)
+	chi	%r0,0x20		# is it a space ?
+	be	.Lcntlp
+	ahi	%r2,1
+	b	.Leolp
 .Lcntlp:
-        brct  %r2,.Ldelspc
+	brct	%r2,.Ldelspc
 .Leolp:
-        slr   %r0,%r0
-        stc   %r0,0(%r2,%r3)                   # terminate buffer
+	slr	%r0,%r0
+	stc	%r0,0(%r2,%r3)		# terminate buffer
 .Lnopf:
 
 #
 # load ramdisk from ipl device
-#	
+#
 .Lagain2:
-	l     %r2,.Linitrd		       # addr of ramdisk
-	st    %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
-        bas   %r14,.Lloader                    # load ramdisk
- 	st    %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk
-        ltr   %r2,%r2
-        bnz   .Lrdcont
-        st    %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
+	l	%r2,.Linitrd		# addr of ramdisk
+	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
+	bas	%r14,.Lloader		# load ramdisk
+	st	%r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
+	ltr	%r2,%r2
+	bnz	.Lrdcont
+	st	%r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
 .Lrdcont:
-	l     %r2,.Linitrd
+	l	%r2,.Linitrd
 
-	clc   0(3,%r2),.L_hdr		       # skip HDRx and EOFx 
-	bz    .Lagain2
-	clc   0(3,%r2),.L_eof
-	bz    .Lagain2
+	clc	0(3,%r2),.L_hdr		# skip HDRx and EOFx
+	bz	.Lagain2
+	clc	0(3,%r2),.L_eof
+	bz	.Lagain2
 
 #ifdef CONFIG_IPL_VM
 #
 # reset files in VM reader
 #
-        stidp __LC_CPUID                       # store cpuid
-	tm    __LC_CPUID,0xff                  # running VM ?
-	bno   .Lnoreset
-        la    %r2,.Lreset              
-        lhi   %r3,26
-	diag  %r2,%r3,8
-	la    %r5,.Lirb
-	stsch 0(%r5)			       # check if irq is pending
-	tm    30(%r5),0x0f		       # by verifying if any of the
-	bnz   .Lwaitforirq		       # activity or status control
-	tm    31(%r5),0xff		       # bits is set in the schib
-	bz    .Lnoreset
+	stidp	__LC_CPUID		# store cpuid
+	tm	__LC_CPUID,0xff 	# running VM ?
+	bno	.Lnoreset
+	la	%r2,.Lreset
+	lhi	%r3,26
+	diag	%r2,%r3,8
+	la	%r5,.Lirb
+	stsch	0(%r5)			# check if irq is pending
+	tm	30(%r5),0x0f		# by verifying if any of the
+	bnz	.Lwaitforirq		# activity or status control
+	tm	31(%r5),0xff		# bits is set in the schib
+	bz	.Lnoreset
 .Lwaitforirq:
-	mvc   0x78(8),.Lrdrnewpsw              # set up IO interrupt psw
+	mvc	0x78(8),.Lrdrnewpsw	# set up IO interrupt psw
 .Lwaitrdrirq:
-	lpsw  .Lrdrwaitpsw
+	lpsw	.Lrdrwaitpsw
 .Lrdrint:
-	c     %r1,0xb8                         # compare subchannel number
-	bne   .Lwaitrdrirq
-	la    %r5,.Lirb
-	tsch  0(%r5)
+	c	%r1,0xb8		# compare subchannel number
+	bne	.Lwaitrdrirq
+	la	%r5,.Lirb
+	tsch	0(%r5)
 .Lnoreset:
-        b     .Lnoload
+	b	.Lnoload
 
-	.align 8
+	.align	8
 .Lrdrnewpsw:
-	.long  0x00080000,0x80000000+.Lrdrint
+	.long	0x00080000,0x80000000+.Lrdrint
 .Lrdrwaitpsw:
-	.long  0x020a0000,0x80000000+.Lrdrint
+	.long	0x020a0000,0x80000000+.Lrdrint
 #endif
 
 #
 # everything loaded, go for it
 #
 .Lnoload:
-        l     %r1,.Lstartup
-        br    %r1
+	l	%r1,.Lstartup
+	br	%r1
 
-.Linitrd:.long _end + 0x400000		       # default address of initrd
+.Linitrd:.long _end + 0x400000		# default address of initrd
 .Lparm:	.long  PARMAREA
 .Lstartup: .long startup
-.Lcvtab:.long  _ebcasc                         # ebcdic to ascii table
-.Lreset:.byte  0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
-        .byte  0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
-        .byte  0xc8,0xd6,0xd3,0xc4             # "change rdr all keep nohold"
-.L_eof: .long  0xc5d6c600       /* C'EOF' */
-.L_hdr: .long  0xc8c4d900       /* C'HDR' */
+.Lcvtab:.long	_ebcasc 		# ebcdic to ascii table
+.Lreset:.byte	0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
+	.byte	0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
+	.byte	0xc8,0xd6,0xd3,0xc4	# "change rdr all keep nohold"
+.L_eof: .long	0xc5d6c600	 /* C'EOF' */
+.L_hdr: .long	0xc8c4d900	 /* C'HDR' */
 
-#endif  /* CONFIG_IPL */
+#endif	/* CONFIG_IPL */
 
 #
 # SALIPL loader support. Based on a patch by Rob van der Heij.
 # This entry point is called directly from the SALIPL loader and
 # doesn't need a builtin ipl record.
 #
-        .org  0x800
-	.globl start
+	.org	0x800
+	.globl	start
 start:
-	stm   %r0,%r15,0x07b0		# store registers
-	basr  %r12,%r0
+	stm	%r0,%r15,0x07b0		# store registers
+	basr	%r12,%r0
 .base:
-	l     %r11,.parm
-	l     %r8,.cmd			# pointer to command buffer
+	l	%r11,.parm
+	l	%r8,.cmd		# pointer to command buffer
 
-	ltr   %r9,%r9			# do we have SALIPL parameters?
-	bp    .sk8x8
+	ltr	%r9,%r9			# do we have SALIPL parameters?
+	bp	.sk8x8
 
-	mvc   0(64,%r8),0x00b0		# copy saved registers
-	xc    64(240-64,%r8),0(%r8)	# remainder of buffer
-	tr    0(64,%r8),.lowcase	
-	b     .gotr
+	mvc	0(64,%r8),0x00b0	# copy saved registers
+	xc	64(240-64,%r8),0(%r8)	# remainder of buffer
+	tr	0(64,%r8),.lowcase
+	b	.gotr
 .sk8x8:
-	mvc   0(240,%r8),0(%r9)		# copy iplparms into buffer
+	mvc	0(240,%r8),0(%r9)	# copy iplparms into buffer
 .gotr:
-	l     %r10,.tbl			# EBCDIC to ASCII table
-	tr    0(240,%r8),0(%r10)
-	stidp __LC_CPUID		# Are we running on VM maybe
-	cli   __LC_CPUID,0xff
-	bnz   .test
-	.long 0x83300060		# diag 3,0,x'0060' - storage size
-	b     .done
+	l	%r10,.tbl		# EBCDIC to ASCII table
+	tr	0(240,%r8),0(%r10)
+	stidp	__LC_CPUID		# Are we running on VM maybe
+	cli	__LC_CPUID,0xff
+	bnz	.test
+	.long	0x83300060		# diag 3,0,x'0060' - storage size
+	b	.done
 .test:
-	mvc   0x68(8),.pgmnw		# set up pgm check handler
-	l     %r2,.fourmeg
-	lr    %r3,%r2
-	bctr  %r3,%r0			# 4M-1
-.loop:  iske  %r0,%r3
-	ar    %r3,%r2
+	mvc	0x68(8),.pgmnw		# set up pgm check handler
+	l	%r2,.fourmeg
+	lr	%r3,%r2
+	bctr	%r3,%r0			# 4M-1
+.loop:	iske	%r0,%r3
+	ar	%r3,%r2
 .pgmx:
-	sr    %r3,%r2
-	la    %r3,1(%r3)
+	sr	%r3,%r2
+	la	%r3,1(%r3)
 .done:
-        l     %r1,.memsize
-	st    %r3,ARCH_OFFSET(%r1)
-	slr   %r0,%r0
-	st    %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
-	st    %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
-	j     startup                   # continue with startup
-.tbl:	.long _ebcasc			# translate table
-.cmd:	.long COMMAND_LINE		# address of command line buffer
-.parm:	.long PARMAREA
+	l	%r1,.memsize
+	st	%r3,ARCH_OFFSET(%r1)
+	slr	%r0,%r0
+	st	%r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
+	st	%r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
+	j	startup 		# continue with startup
+.tbl:	.long	_ebcasc			# translate table
+.cmd:	.long	COMMAND_LINE		# address of command line buffer
+.parm:	.long	PARMAREA
 .memsize: .long memory_size
 .fourmeg: .long 0x00400000      	# 4M
-.pgmnw:	.long 0x00080000,.pgmx
+.pgmnw:	.long	0x00080000,.pgmx
 .lowcase:
-	.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 
+	.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
 	.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
-	.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 
+	.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
 	.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
-	.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 
+	.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
 	.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
-	.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 
+	.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
 	.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
-	.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 
+	.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
 	.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
-	.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 
+	.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
 	.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
-	.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 
+	.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
 	.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
-	.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 
+	.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
 	.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
 
-	.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 
+	.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
 	.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
-	.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 
+	.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
 	.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
-	.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 
+	.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
 	.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
-	.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 
+	.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
 	.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
-	.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87	# .abcdefg 
+	.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87	# .abcdefg
 	.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf	# hi
-	.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 	# .jklmnop
+	.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97	# .jklmnop
 	.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf	# qr
 	.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7	# ..stuvwx
 	.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef	# yz
-	.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 
+	.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
 	.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
 
 #ifdef CONFIG_64BIT