diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/sandpoint.h |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/ppc/platforms/sandpoint.h')
-rw-r--r-- | arch/ppc/platforms/sandpoint.h | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h new file mode 100644 index 00000000000..f4e982cb69d --- /dev/null +++ b/arch/ppc/platforms/sandpoint.h @@ -0,0 +1,80 @@ +/* + * arch/ppc/platforms/sandpoint.h + * + * Definitions for Motorola SPS Sandpoint Test Platform + * + * Author: Mark A. Greer + * mgreer@mvista.com + * + * 2000-2003 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +/* + * Sandpoint uses the CHRP map (Map B). + */ + +#ifndef __PPC_PLATFORMS_SANDPOINT_H +#define __PPC_PLATFORMS_SANDPOINT_H + +#include <asm/ppcboot.h> + +#if 0 +/* The Sandpoint X3 allows the IDE interrupt to be directly connected + * from the Windbond (PCI INTC or INTD) to the serial EPIC. Someday + * we should try this, but it was easier to use the existing 83c553 + * initialization than change it to route the different interrupts :-). + * -- Dan + */ +#define SANDPOINT_IDE_INT0 23 /* EPIC 7 */ +#define SANDPOINT_IDE_INT1 24 /* EPIC 8 */ +#else +#define SANDPOINT_IDE_INT0 14 /* 8259 Test */ +#define SANDPOINT_IDE_INT1 15 /* 8259 Test */ +#endif + +/* + * The sandpoint boards have processor modules that either have an 8240 or + * an MPC107 host bridge on them. These bridges have an IDSEL line that allows + * them to respond to PCI transactions as if they were a normal PCI devices. + * However, the processor on the processor side of the bridge can not reach + * out onto the PCI bus and then select the bridge or bad things will happen + * (documented in the 8240 and 107 manuals). + * Because of this, we always skip the bridge PCI device when accessing the + * PCI bus. The PCI slot that the bridge occupies is defined by the macro + * below. + */ +#define SANDPOINT_HOST_BRIDGE_IDSEL 12 + +/* + * Serial defines. + */ +#define SANDPOINT_SERIAL_0 0xfe0003f8 +#define SANDPOINT_SERIAL_1 0xfe0002f8 + +#define RS_TABLE_SIZE 2 + +/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ +#define BASE_BAUD ( 1843200 / 16 ) +#define UART_CLK 1843200 + +#ifdef CONFIG_SERIAL_DETECT_IRQ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ) +#else +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF) +#endif + +#define STD_SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, SANDPOINT_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \ + iomem_base: (u8 *)SANDPOINT_SERIAL_0, \ + io_type: SERIAL_IO_MEM }, \ + { 0, BASE_BAUD, SANDPOINT_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \ + iomem_base: (u8 *)SANDPOINT_SERIAL_1, \ + io_type: SERIAL_IO_MEM }, + +#define SERIAL_PORT_DFNS \ + STD_SERIAL_PORT_DFNS + +#endif /* __PPC_PLATFORMS_SANDPOINT_H */ |