powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 844 deletions

diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
deleted file mode 100644
index cbcac85c7a7..00000000000
--- a/arch/ppc/platforms/pplus.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- * Board and PCI setup routines for MCG PowerPlus
- *
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * Derived from original PowerPlus PReP work by
- * Cort Dougan, Johnnie Peters, Matt Porter, and
- * Troy Benjegerdes.
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-#include <asm/vga.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-#include <asm/reg.h>
-
-#include "pplus.h"
-
-#undef DUMP_DBATS
-
-TODC_ALLOC();
-
-extern void pplus_setup_hose(void);
-extern void pplus_set_VIA_IDE_native(void);
-
-extern unsigned long loops_per_jiffy;
-unsigned char *Motherboard_map_name;
-
-/* Tables for known hardware */
-
-/* Motorola Mesquite */
-static inline int
-mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{19, 19, 19, 19},	/* IDSEL 16 - PMC Slot 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 17 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{24, 25, 26, 27},	/* IDSEL 20 - P2P bridge (to cPCI 1) */
-		{ 0,  0,  0,  0},	/* IDSEL 21 - unused */
-		{28, 29, 30, 31}	/* IDSEL 22 - P2P bridge (to cPCI 2) */
-	};
-
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola Sitka */
-static inline int
-sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{28, 25, 26, 27},	/* IDSEL 17 - PMC Slot 2 */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{20,  0,  0,  0}	/* IDSEL 20 - P2P bridge (to cPCI) */
-	};
-
-	const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX */
-static inline int
-MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet   */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{26, 27, 28, 25},	/* IDSEL 17 - PMC Slot 2 */
-		{27, 28, 25, 26}	/* IDSEL 18 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static inline int
-MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI Slot 1P */
-		{26, 27, 28, 25},	/* IDSEL 17 - PCI Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{ 0,  0,  0,  0}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	/* 2600
-	 * Raven 31
-	 * ISA   11
-	 * SCSI  12 - IRQ3
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * VGA   15 - IRQ4
-	 * PMC1  16 - IRQ9,10,11,12 = PMC1 A-D
-	 * PMC2  17 - IRQ12,9,10,11 = A-D
-	 * SCSI2 18 - IRQ11
-	 * eth2  19 - IRQ10
-	 * PCIX  20 - IRQ9,10,11,12 = PCI A-D
-	 */
-
-	/* 2400
-	 * Hawk 31
-	 * ISA  11
-	 * Univ 13
-	 * eth  14 - IRQ2
-	 * PMC1 16 - IRQ9,10,11,12 = PMC A-D
-	 * PMC2 17 - IRQ12,9,10,11 = PMC A-D
-	 * PCIX 20 - IRQ9,10,11,12 = PMC A-D
-	 */
-
-	/* 2300
-	 * Raven 31
-	 * ISA   11
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * PMC1  16 - 9,10,11,12 = A-D
-	 * PMC2  17 - 9,10,11,12 = B,C,D,A
-	 */
-
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - Universe PCI - VME */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI/PMC Slot 1P */
-		{28, 25, 26, 27},	/* IDSEL 17 - PCI/PMC Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{25, 26, 27, 28}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char pplus_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),
-};
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int mot_multi = 0;
-
-struct brd_info {
-	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge
-	 * are set */
-	int cpu_type;
-	/* 0x200 if this board has a Hawk chip. */
-	int base_type;
-	/* or'ed with 0x80 if this board should be checked for multi CPU */
-	int max_cpu;
-	const char *name;
-	int (*map_irq) (struct pci_dev *, unsigned char, unsigned char);
-};
-struct brd_info mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq},
-	{0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq},
-	{0x000, 0x00, 0x00, "", NULL}
-};
-
-void __init pplus_set_board_type(void)
-{
-	unsigned char cpu_type;
-	unsigned char base_mod;
-	int entry;
-	unsigned short devid;
-	unsigned long *ProcInfo = NULL;
-
-	cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-
-	for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-		/* Check for Hawk chip */
-		if (mot_info[entry].cpu_type & 0x200) {
-			if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK)
-				continue;
-		} else {
-			/* store the system config register for later use. */
-			ProcInfo =
-			    (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4);
-
-			/* Check non hawk boards */
-			if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-				continue;
-
-			if (mot_info[entry].base_type == 0) {
-				mot_entry = entry;
-				break;
-			}
-
-			if (mot_info[entry].base_type != base_mod)
-				continue;
-		}
-
-		if (!(mot_info[entry].max_cpu & 0x80)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 not present and max processor zero indicated */
-		if ((*ProcInfo & MOT_PROC2_BIT)
-		    && !(mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 present and max processor zero indicated */
-		if (!(*ProcInfo & MOT_PROC2_BIT)
-		    && (mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* Indicate to system if this is a multiprocessor board */
-		if (!(*ProcInfo & MOT_PROC2_BIT))
-			mot_multi = 1;
-	}
-
-	if (mot_entry == -1)
-		/* No particular cpu type found - assume Mesquite (MCP750) */
-		mot_entry = 1;
-
-	Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-	ppc_md.pci_map_irq = mot_info[mot_entry].map_irq;
-}
-void __init pplus_pib_init(void)
-{
-	unsigned char reg;
-	unsigned short short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	/*
-	 * Perform specific configuration for the Via Tech or
-	 * or Winbond PCI-ISA-Bridge part.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-		/*
-		 * PPCBUG does not set the enable bits
-		 * for the IDE device. Force them on here.
-		 */
-		pci_read_config_byte(dev, 0x40, &reg);
-
-		reg |= 0x03;	/* IDE: Chip Enable Bits */
-		pci_write_config_byte(dev, 0x40, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_2,
-				   dev)) && (dev->devfn = 0x5a)) {
-		/* Force correct USB interrupt */
-		dev->irq = 11;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-		/* Clear PCI Interrupt Routing Control Register. */
-		short_reg = 0x0000;
-		pci_write_config_word(dev, 0x44, short_reg);
-		/* Route IDE interrupts to IRQ 14 */
-		reg = 0xEE;
-		pci_write_config_byte(dev, 0x43, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))) {
-		/*
-		 * Disable LEGIRQ mode so PCI INTS are routed
-		 * directly to the 8259 and enable both channels
-		 */
-		pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-		/* Force correct IDE interrupt */
-		dev->irq = 14;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-	pci_dev_put(dev);
-}
-
-void __init pplus_set_VIA_IDE_legacy(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put back original "standard" port base addresses */
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_0, 0x1f1);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_1, 0x3f5);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_2, 0x171);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_3, 0x375);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_4, 0xcc01);
-
-		/* put into legacy mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp &= ~0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void pplus_set_VIA_IDE_native(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put into native mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp |= 0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void __init pplus_pcibios_fixup(void)
-{
-
-	unsigned char reg;
-	unsigned short devid;
-	unsigned char base_mod;
-
-	printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n",
-			Motherboard_map_name);
-
-	/* Setup the Winbond or Via PIB */
-	pplus_pib_init();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) ||
-	    (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-}
-
-void __init pplus_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_virt = (void *)PREP_ISA_IO_BASE;
-
-	pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START,
-			  PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge");
-	pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START,
-			  PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = PPLUS_PCI_IO_START;
-	hose->io_space.end = PPLUS_PCI_IO_END;
-	hose->mem_space.start = PPLUS_PCI_MEM_START;
-	hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-				PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-			!= 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-
-	}
-
-	pplus_set_VIA_IDE_legacy();
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = pplus_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-}
-
-static int pplus_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola MCG\n");
-	seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
-
-	return 0;
-}
-
-static void __init pplus_setup_arch(void)
-{
-	struct pci_controller *hose;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	pplus_find_bridges();
-
-	hose = pci_bus_to_hose(0);
-	isa_io_base = (ulong) hose->io_base_virt;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: set_board_type", 0);
-
-	pplus_set_board_type();
-
-	/* Enable L2.  Assume we don't need to flush -- Cort */
-	*(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Motorola PowerPlus Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* remap the VGA memory */
-	vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE,
-						   0x08000000);
-	conswitchp = &vga_con;
-#endif
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if (cmd_line[0] == '\0') {
-		char *bootargs;
-		bootargs = prep_nvram_get_var("bootargs");
-		if (bootargs != NULL) {
-			strcpy(cmd_line, bootargs);
-			/* again.. */
-			strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: exit", 0);
-}
-
-static void pplus_restart(char *cmd)
-{
-	unsigned long i = 10000;
-
-	local_irq_disable();
-
-	/* set VIA IDE controller into native mode */
-	pplus_set_VIA_IDE_native();
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (i != 0)
-		i++;
-	panic("restart failed\n");
-}
-
-static void pplus_halt(void)
-{
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(MSR_EE, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (1) ;
-	/*
-	 * Not reached
-	 */
-}
-
-static void pplus_power_off(void)
-{
-	pplus_halt();
-}
-
-static void __init pplus_init_IRQ(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: enter", 0);
-
-	OpenPIC_InitSenses = pplus_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses);
-
-	if (OpenPIC_Addr != NULL) {
-
-		openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-		openpic_init(NUM_8259_INTERRUPTS);
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-					i8259_irq);
-		ppc_md.get_irq = openpic_get_irq;
-	}
-
-	i8259_init(0, 0);
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: exit", 0);
-}
-
-#ifdef CONFIG_SMP
-/* PowerPlus (MTX) support */
-static int __init smp_pplus_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init smp_pplus_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-	printk(KERN_INFO "CPU1 reset, waiting\n");
-}
-
-static void __init smp_pplus_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t pplus_smp_ops = {
-	smp_openpic_message_pass,
-	smp_pplus_probe,
-	smp_pplus_kick_cpu,
-	smp_pplus_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif				/* CONFIG_SMP */
-
-#ifdef DUMP_DBATS
-static void print_dbat(int idx, u32 bat)
-{
-
-	char str[64];
-
-	sprintf(str, "DBAT%c%c = 0x%08x\n",
-		(char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat);
-	ppc_md.progress(str, 0);
-}
-
-#define DUMP_DBAT(x) \
-	do { \
-	u32 __temp = mfspr(x);\
-	print_dbat(x, __temp); \
-	} while (0)
-
-static void dump_dbats(void)
-{
-	if (ppc_md.progress) {
-		DUMP_DBAT(DBAT0U);
-		DUMP_DBAT(DBAT0L);
-		DUMP_DBAT(DBAT1U);
-		DUMP_DBAT(DBAT1L);
-		DUMP_DBAT(DBAT2U);
-		DUMP_DBAT(DBAT2L);
-		DUMP_DBAT(DBAT3U);
-		DUMP_DBAT(DBAT3L);
-	}
-}
-#endif
-
-static unsigned long __init pplus_find_end_of_memory(void)
-{
-	unsigned long total;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_find_end_of_memory", 0);
-
-#ifdef DUMP_DBATS
-	dump_dbats();
-#endif
-
-	total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
-	return (total);
-}
-
-static void __init pplus_map_io(void)
-{
-	io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000,
-			 _PAGE_IO);
-	io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);
-}
-
-static void __init pplus_init2(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x20, 0x20, "pic1");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xc0, 0x20, "dma2");
-}
-
-/*
- * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
- * to 0xf0000000 to access Falcon/Raven or Hawk registers
- */
-static __inline__ void pplus_set_bat(void)
-{
-	/* wait for all outstanding memory accesses to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-	mtspr(SPRN_DBAT3U, 0xf0001ffe);
-	mtspr(SPRN_DBAT3L, 0xf000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	pplus_set_bat();
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = pplus_setup_arch;
-	ppc_md.show_cpuinfo = pplus_show_cpuinfo;
-	ppc_md.init_IRQ = pplus_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq = i8259_irq;
-	ppc_md.init = pplus_init2;
-
-	ppc_md.restart = pplus_restart;
-	ppc_md.power_off = pplus_power_off;
-	ppc_md.halt = pplus_halt;
-
-	TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-		  PREP_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-
-	ppc_md.find_end_of_memory = pplus_find_end_of_memory;
-	ppc_md.setup_io_mappings = pplus_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SMP
-	smp_ops = &pplus_smp_ops;
-#endif				/* CONFIG_SMP */
-}