powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 130 deletions

diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
deleted file mode 100644
index 5219366667b..00000000000
--- a/arch/ppc/platforms/fads.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola 860T FADS board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Added MPC86XADS support.
- * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS
- * for SW point of view". This is 99% correct.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_FADS_H__
-#define __ASM_FADS_H__
-
-
-#include <asm/ppcboot.h>
-
-/* Memory map is configured by the PROM startup.
- * I tried to follow the FADS manual, although the startup PROM
- * dictates this and we simply have to move some of the physical
- * addresses for Linux.
- */
-#define BCSR_ADDR		((uint)0xff010000)
-
-/* PHY link change interrupt */
-#define PHY_INTERRUPT	SIU_IRQ2
-
-#define BCSR_SIZE		((uint)(64 * 1024))
-#define BCSR0			((uint)(BCSR_ADDR + 0x00))
-#define BCSR1			((uint)(BCSR_ADDR + 0x04))
-#define BCSR2			((uint)(BCSR_ADDR + 0x08))
-#define BCSR3			((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4			((uint)(BCSR_ADDR + 0x10))
-
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-/* Bits of interest in the BCSRs.
- */
-#define BCSR1_ETHEN		((uint)0x20000000)
-#define BCSR1_IRDAEN		((uint)0x10000000)
-#define BCSR1_RS232EN_1		((uint)0x01000000)
-#define BCSR1_PCCEN		((uint)0x00800000)
-#define BCSR1_PCCVCC0		((uint)0x00400000)
-#define BCSR1_PCCVPP0		((uint)0x00200000)
-#define BCSR1_PCCVPP1		((uint)0x00100000)
-#define BCSR1_PCCVPP_MASK	(BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
-#define BCSR1_RS232EN_2		((uint)0x00040000)
-#define BCSR1_PCCVCC1		((uint)0x00010000)
-#define BCSR1_PCCVCC_MASK	(BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
-
-#define BCSR4_ETHLOOP		((uint)0x80000000)	/* EEST Loopback */
-#define BCSR4_EEFDX		((uint)0x40000000)	/* EEST FDX enable */
-#define BCSR4_FETH_EN		((uint)0x08000000)	/* PHY enable */
-#define BCSR4_FETHCFG0		((uint)0x04000000)	/* PHY autoneg mode */
-#define BCSR4_FETHCFG1		((uint)0x00400000)	/* PHY autoneg mode */
-#define BCSR4_FETHFDE		((uint)0x02000000)	/* PHY FDX advertise */
-#define BCSR4_FETHRST		((uint)0x00200000)	/* PHY Reset */
-
-/* IO_BASE definition for pcmcia.
- */
-#define _IO_BASE	0x80000000
-#define _IO_BASE_SIZE	0x1000
-
-#ifdef CONFIG_IDE
-#define MAX_HWIFS 1
-#endif
-
-/* Interrupt level assignments.
- */
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-/* We don't use the 8259.
- */
-#define NR_8259_INTS	0
-
-/* CPM Ethernet through SCC1 or SCC2 */
-
-#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1)		/* Probably 860 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-#endif /* CONFIG_SCC1_ENET */
-
-#ifdef CONFIG_SCC2_ENET		/* Probably 823/850 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0400)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* Control bits in the SICR to route TCLK and RCLK to
- * SCC2.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002e00)
-#endif /* CONFIG_SCC2_ENET */
-
-#endif /* __ASM_FADS_H__ */
-#endif /* __KERNEL__ */