Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 962 insertions, 0 deletions

diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c
new file mode 100644
index 00000000000..af881d7454d
--- /dev/null
+++ b/arch/ppc/amiga/config.c
@@ -0,0 +1,962 @@
+#define m68k_debug_device debug_device
+
+/*
+ *  arch/ppc/amiga/config.c
+ *
+ *  Copyright (C) 1993 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * Miscellaneous Amiga stuff
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/kd.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#ifdef CONFIG_ZORRO
+#include <linux/zorro.h>
+#endif
+
+#include <asm/bootinfo.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+
+unsigned long powerup_PCI_present;
+unsigned long powerup_BPPCPLUS_present;
+unsigned long amiga_model;
+unsigned long amiga_eclock;
+unsigned long amiga_masterclock;
+unsigned long amiga_colorclock;
+unsigned long amiga_chipset;
+unsigned char amiga_vblank;
+unsigned char amiga_psfreq;
+struct amiga_hw_present amiga_hw_present;
+
+static char s_a500[] __initdata = "A500";
+static char s_a500p[] __initdata = "A500+";
+static char s_a600[] __initdata = "A600";
+static char s_a1000[] __initdata = "A1000";
+static char s_a1200[] __initdata = "A1200";
+static char s_a2000[] __initdata = "A2000";
+static char s_a2500[] __initdata = "A2500";
+static char s_a3000[] __initdata = "A3000";
+static char s_a3000t[] __initdata = "A3000T";
+static char s_a3000p[] __initdata = "A3000+";
+static char s_a4000[] __initdata = "A4000";
+static char s_a4000t[] __initdata = "A4000T";
+static char s_cdtv[] __initdata = "CDTV";
+static char s_cd32[] __initdata = "CD32";
+static char s_draco[] __initdata = "Draco";
+static char *amiga_models[] __initdata = {
+    s_a500, s_a500p, s_a600, s_a1000, s_a1200, s_a2000, s_a2500, s_a3000,
+    s_a3000t, s_a3000p, s_a4000, s_a4000t, s_cdtv, s_cd32, s_draco,
+};
+
+static char amiga_model_name[13] = "Amiga ";
+
+extern char m68k_debug_device[];
+
+static void amiga_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+/* amiga specific irq functions */
+extern void amiga_init_IRQ (void);
+extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
+extern int amiga_request_irq (unsigned int irq,
+			      void (*handler)(int, void *, struct pt_regs *),
+                              unsigned long flags, const char *devname,
+			      void *dev_id);
+extern void amiga_free_irq (unsigned int irq, void *dev_id);
+extern void amiga_enable_irq (unsigned int);
+extern void amiga_disable_irq (unsigned int);
+static void amiga_get_model(char *model);
+static int amiga_get_hardware_list(char *buffer);
+/* amiga specific timer functions */
+static unsigned long amiga_gettimeoffset (void);
+static void a3000_gettod (int *, int *, int *, int *, int *, int *);
+static void a2000_gettod (int *, int *, int *, int *, int *, int *);
+static int amiga_hwclk (int, struct hwclk_time *);
+static int amiga_set_clock_mmss (unsigned long);
+#ifdef CONFIG_AMIGA_FLOPPY
+extern void amiga_floppy_setup(char *, int *);
+#endif
+static void amiga_reset (void);
+extern void amiga_init_sound(void);
+static void amiga_savekmsg_init(void);
+static void amiga_mem_console_write(struct console *co, const char *b,
+				    unsigned int count);
+void amiga_serial_console_write(struct console *co, const char *s,
+				unsigned int count);
+static void amiga_debug_init(void);
+#ifdef CONFIG_HEARTBEAT
+static void amiga_heartbeat(int on);
+#endif
+
+static struct console amiga_console_driver = {
+	.name =		"debug",
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+
+    /*
+     *  Motherboard Resources present in all Amiga models
+     */
+
+static struct {
+    struct resource _ciab, _ciaa, _custom, _kickstart;
+} mb_resources = {
+//    { "Ranger Memory", 0x00c00000, 0x00c7ffff },
+    ._ciab =	  { "CIA B", 0x00bfd000, 0x00bfdfff },
+    ._ciaa =	  { "CIA A", 0x00bfe000, 0x00bfefff },
+    ._custom =	  { "Custom I/O", 0x00dff000, 0x00dfffff },
+    ._kickstart = { "Kickstart ROM", 0x00f80000, 0x00ffffff }
+};
+
+static struct resource rtc_resource = {
+    NULL, 0x00dc0000, 0x00dcffff
+};
+
+static struct resource ram_resource[NUM_MEMINFO];
+
+
+    /*
+     *  Parse an Amiga-specific record in the bootinfo
+     */
+
+int amiga_parse_bootinfo(const struct bi_record *record)
+{
+    int unknown = 0;
+    const unsigned long *data = record->data;
+
+    switch (record->tag) {
+	case BI_AMIGA_MODEL:
+	{
+		unsigned long d = *data;
+
+		powerup_PCI_present = d & 0x100;
+		amiga_model = d & 0xff;
+	}
+	break;
+
+	case BI_AMIGA_ECLOCK:
+	    amiga_eclock = *data;
+	    break;
+
+	case BI_AMIGA_CHIPSET:
+	    amiga_chipset = *data;
+	    break;
+
+	case BI_AMIGA_CHIP_SIZE:
+	    amiga_chip_size = *(const int *)data;
+	    break;
+
+	case BI_AMIGA_VBLANK:
+	    amiga_vblank = *(const unsigned char *)data;
+	    break;
+
+	case BI_AMIGA_PSFREQ:
+	    amiga_psfreq = *(const unsigned char *)data;
+	    break;
+
+	case BI_AMIGA_AUTOCON:
+#ifdef CONFIG_ZORRO
+	    if (zorro_num_autocon < ZORRO_NUM_AUTO) {
+		const struct ConfigDev *cd = (struct ConfigDev *)data;
+		struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
+		dev->rom = cd->cd_Rom;
+		dev->slotaddr = cd->cd_SlotAddr;
+		dev->slotsize = cd->cd_SlotSize;
+		dev->resource.start = (unsigned long)cd->cd_BoardAddr;
+		dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
+	    } else
+		printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+#endif /* CONFIG_ZORRO */
+	    break;
+
+	case BI_AMIGA_SERPER:
+	    /* serial port period: ignored here */
+	    break;
+
+	case BI_AMIGA_PUP_BRIDGE:
+	    powerup_PCI_present = *(const unsigned short *)data;
+	    break;
+
+	case BI_AMIGA_BPPC_SCSI:
+	    powerup_BPPCPLUS_present = *(const unsigned short *)data;
+	    break;
+
+	default:
+	    unknown = 1;
+    }
+    return(unknown);
+}
+
+    /*
+     *  Identify builtin hardware
+     */
+
+static void __init amiga_identify(void)
+{
+  /* Fill in some default values, if necessary */
+  if (amiga_eclock == 0)
+    amiga_eclock = 709379;
+
+  memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
+
+  printk("Amiga hardware found: ");
+  if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
+    printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+    strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
+  }
+
+  switch(amiga_model) {
+  case AMI_UNKNOWN:
+    goto Generic;
+
+  case AMI_600:
+  case AMI_1200:
+    AMIGAHW_SET(A1200_IDE);
+    AMIGAHW_SET(PCMCIA);
+  case AMI_500:
+  case AMI_500PLUS:
+  case AMI_1000:
+  case AMI_2000:
+  case AMI_2500:
+    AMIGAHW_SET(A2000_CLK);	/* Is this correct for all models? */
+    goto Generic;
+
+  case AMI_3000:
+  case AMI_3000T:
+    AMIGAHW_SET(AMBER_FF);
+    AMIGAHW_SET(MAGIC_REKICK);
+    /* fall through */
+  case AMI_3000PLUS:
+    AMIGAHW_SET(A3000_SCSI);
+    AMIGAHW_SET(A3000_CLK);
+    AMIGAHW_SET(ZORRO3);
+    goto Generic;
+
+  case AMI_4000T:
+    AMIGAHW_SET(A4000_SCSI);
+    /* fall through */
+  case AMI_4000:
+    AMIGAHW_SET(A4000_IDE);
+    AMIGAHW_SET(A3000_CLK);
+    AMIGAHW_SET(ZORRO3);
+    goto Generic;
+
+  case AMI_CDTV:
+  case AMI_CD32:
+    AMIGAHW_SET(CD_ROM);
+    AMIGAHW_SET(A2000_CLK);             /* Is this correct? */
+    goto Generic;
+
+  Generic:
+    AMIGAHW_SET(AMI_VIDEO);
+    AMIGAHW_SET(AMI_BLITTER);
+    AMIGAHW_SET(AMI_AUDIO);
+    AMIGAHW_SET(AMI_FLOPPY);
+    AMIGAHW_SET(AMI_KEYBOARD);
+    AMIGAHW_SET(AMI_MOUSE);
+    AMIGAHW_SET(AMI_SERIAL);
+    AMIGAHW_SET(AMI_PARALLEL);
+    AMIGAHW_SET(CHIP_RAM);
+    AMIGAHW_SET(PAULA);
+
+    switch(amiga_chipset) {
+    case CS_OCS:
+    case CS_ECS:
+    case CS_AGA:
+      switch (custom.deniseid & 0xf) {
+      case 0x0c:
+	AMIGAHW_SET(DENISE_HR);
+	break;
+      case 0x08:
+	AMIGAHW_SET(LISA);
+	break;
+      }
+      break;
+    default:
+      AMIGAHW_SET(DENISE);
+      break;
+    }
+    switch ((custom.vposr>>8) & 0x7f) {
+    case 0x00:
+      AMIGAHW_SET(AGNUS_PAL);
+      break;
+    case 0x10:
+      AMIGAHW_SET(AGNUS_NTSC);
+      break;
+    case 0x20:
+    case 0x21:
+      AMIGAHW_SET(AGNUS_HR_PAL);
+      break;
+    case 0x30:
+    case 0x31:
+      AMIGAHW_SET(AGNUS_HR_NTSC);
+      break;
+    case 0x22:
+    case 0x23:
+      AMIGAHW_SET(ALICE_PAL);
+      break;
+    case 0x32:
+    case 0x33:
+      AMIGAHW_SET(ALICE_NTSC);
+      break;
+    }
+    AMIGAHW_SET(ZORRO);
+    break;
+
+  case AMI_DRACO:
+    panic("No support for Draco yet");
+
+  default:
+    panic("Unknown Amiga Model");
+  }
+
+#define AMIGAHW_ANNOUNCE(name, str)			\
+  if (AMIGAHW_PRESENT(name))				\
+    printk(str)
+
+  AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
+  AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
+  AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
+  AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
+  AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
+  AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
+  AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
+  AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
+  AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
+  AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
+  AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
+  AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
+  AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
+  AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
+  AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
+  AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
+  AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
+  AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
+  AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
+  AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
+  AMIGAHW_ANNOUNCE(LISA, "LISA ");
+  AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
+  AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
+  AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
+  AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
+  AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
+  AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
+  AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
+  AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
+  if (AMIGAHW_PRESENT(ZORRO))
+    printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+  printk("\n");
+
+#undef AMIGAHW_ANNOUNCE
+}
+
+    /*
+     *  Setup the Amiga configuration info
+     */
+
+void __init config_amiga(void)
+{
+  int i;
+
+  amiga_debug_init();
+  amiga_identify();
+
+  /* Some APUS boxes may have PCI memory, but ... */
+  iomem_resource.name = "Memory";
+  for (i = 0; i < 4; i++)
+    request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
+
+  mach_sched_init      = amiga_sched_init;
+  mach_init_IRQ        = amiga_init_IRQ;
+#ifndef CONFIG_APUS
+  mach_default_handler = &amiga_default_handler;
+  mach_request_irq     = amiga_request_irq;
+  mach_free_irq        = amiga_free_irq;
+  enable_irq           = amiga_enable_irq;
+  disable_irq          = amiga_disable_irq;
+#endif
+  mach_get_model       = amiga_get_model;
+  mach_get_hardware_list = amiga_get_hardware_list;
+  mach_gettimeoffset   = amiga_gettimeoffset;
+  if (AMIGAHW_PRESENT(A3000_CLK)){
+    mach_gettod  = a3000_gettod;
+    rtc_resource.name = "A3000 RTC";
+    request_resource(&iomem_resource, &rtc_resource);
+  }
+  else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
+    mach_gettod  = a2000_gettod;
+    rtc_resource.name = "A2000 RTC";
+    request_resource(&iomem_resource, &rtc_resource);
+  }
+
+  mach_max_dma_address = 0xffffffff; /*
+				      * default MAX_DMA=0xffffffff
+				      * on all machines. If we don't
+				      * do so, the SCSI code will not
+				      * be able to allocate any mem
+				      * for transfers, unless we are
+				      * dealing with a Z2 mem only
+				      * system.                  /Jes
+				      */
+
+  mach_hwclk           = amiga_hwclk;
+  mach_set_clock_mmss  = amiga_set_clock_mmss;
+#ifdef CONFIG_AMIGA_FLOPPY
+  mach_floppy_setup    = amiga_floppy_setup;
+#endif
+  mach_reset           = amiga_reset;
+#ifdef CONFIG_HEARTBEAT
+  mach_heartbeat = amiga_heartbeat;
+#endif
+
+  /* Fill in the clock values (based on the 700 kHz E-Clock) */
+  amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
+  amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
+
+  /* clear all DMA bits */
+  custom.dmacon = DMAF_ALL;
+  /* ensure that the DMA master bit is set */
+  custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
+
+  /* request all RAM */
+  for (i = 0; i < m68k_num_memory; i++) {
+    ram_resource[i].name =
+      (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
+      (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
+      "16-bit Slow RAM";
+    ram_resource[i].start = m68k_memory[i].addr;
+    ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
+    request_resource(&iomem_resource, &ram_resource[i]);
+  }
+
+  /* initialize chipram allocator */
+  amiga_chip_init ();
+
+  /* debugging using chipram */
+  if (!strcmp( m68k_debug_device, "mem" )){
+	  if (!AMIGAHW_PRESENT(CHIP_RAM))
+		  printk("Warning: no chipram present for debugging\n");
+	  else {
+		  amiga_savekmsg_init();
+		  amiga_console_driver.write = amiga_mem_console_write;
+		  register_console(&amiga_console_driver);
+	  }
+  }
+
+  /* our beloved beeper */
+  if (AMIGAHW_PRESENT(AMI_AUDIO))
+	  amiga_init_sound();
+
+  /*
+   * if it is an A3000, set the magic bit that forces
+   * a hard rekick
+   */
+  if (AMIGAHW_PRESENT(MAGIC_REKICK))
+	  *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
+}
+
+static unsigned short jiffy_ticks;
+
+static void __init amiga_sched_init(irqreturn_t (*timer_routine)(int, void *,
+						struct pt_regs *))
+{
+	static struct resource sched_res = {
+	    "timer", 0x00bfd400, 0x00bfd5ff,
+	};
+	jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
+
+	if (request_resource(&mb_resources._ciab, &sched_res))
+	    printk("Cannot allocate ciab.ta{lo,hi}\n");
+	ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
+	ciab.talo = jiffy_ticks % 256;
+	ciab.tahi = jiffy_ticks / 256;
+
+	/* install interrupt service routine for CIAB Timer A
+	 *
+	 * Please don't change this to use ciaa, as it interferes with the
+	 * SCSI code. We'll have to take a look at this later
+	 */
+	request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
+	/* start timer */
+	ciab.cra |= 0x11;
+}
+
+#define TICK_SIZE 10000
+
+extern unsigned char cia_get_irq_mask(unsigned int irq);
+
+/* This is always executed with interrupts disabled.  */
+static unsigned long amiga_gettimeoffset (void)
+{
+	unsigned short hi, lo, hi2;
+	unsigned long ticks, offset = 0;
+
+	/* read CIA B timer A current value */
+	hi  = ciab.tahi;
+	lo  = ciab.talo;
+	hi2 = ciab.tahi;
+
+	if (hi != hi2) {
+		lo = ciab.talo;
+		hi = hi2;
+	}
+
+	ticks = hi << 8 | lo;
+
+	if (ticks > jiffy_ticks / 2)
+		/* check for pending interrupt */
+		if (cia_get_irq_mask(IRQ_AMIGA_CIAB) & CIA_ICR_TA)
+			offset = 10000;
+
+	ticks = jiffy_ticks - ticks;
+	ticks = (10000 * ticks) / jiffy_ticks;
+
+	return ticks + offset;
+}
+
+static void a3000_gettod (int *yearp, int *monp, int *dayp,
+			  int *hourp, int *minp, int *secp)
+{
+	volatile struct tod3000 *tod = TOD_3000;
+
+	tod->cntrl1 = TOD3000_CNTRL1_HOLD;
+
+	*secp  = tod->second1 * 10 + tod->second2;
+	*minp  = tod->minute1 * 10 + tod->minute2;
+	*hourp = tod->hour1   * 10 + tod->hour2;
+	*dayp  = tod->day1    * 10 + tod->day2;
+	*monp  = tod->month1  * 10 + tod->month2;
+	*yearp = tod->year1   * 10 + tod->year2;
+
+	tod->cntrl1 = TOD3000_CNTRL1_FREE;
+}
+
+static void a2000_gettod (int *yearp, int *monp, int *dayp,
+			  int *hourp, int *minp, int *secp)
+{
+	volatile struct tod2000 *tod = TOD_2000;
+
+	tod->cntrl1 = TOD2000_CNTRL1_HOLD;
+
+	while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
+		;
+
+	*secp  = tod->second1     * 10 + tod->second2;
+	*minp  = tod->minute1     * 10 + tod->minute2;
+	*hourp = (tod->hour1 & 3) * 10 + tod->hour2;
+	*dayp  = tod->day1        * 10 + tod->day2;
+	*monp  = tod->month1      * 10 + tod->month2;
+	*yearp = tod->year1       * 10 + tod->year2;
+
+	if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
+		if (!(tod->hour1 & TOD2000_HOUR1_PM) && *hourp == 12)
+			*hourp = 0;
+		else if ((tod->hour1 & TOD2000_HOUR1_PM) && *hourp != 12)
+			*hourp += 12;
+	}
+
+	tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+}
+
+static int amiga_hwclk(int op, struct hwclk_time *t)
+{
+	if (AMIGAHW_PRESENT(A3000_CLK)) {
+		volatile struct tod3000 *tod = TOD_3000;
+
+		tod->cntrl1 = TOD3000_CNTRL1_HOLD;
+
+		if (!op) { /* read */
+			t->sec  = tod->second1 * 10 + tod->second2;
+			t->min  = tod->minute1 * 10 + tod->minute2;
+			t->hour = tod->hour1   * 10 + tod->hour2;
+			t->day  = tod->day1    * 10 + tod->day2;
+			t->wday = tod->weekday;
+			t->mon  = tod->month1  * 10 + tod->month2 - 1;
+			t->year = tod->year1   * 10 + tod->year2;
+			if (t->year <= 69)
+				t->year += 100;
+		} else {
+			tod->second1 = t->sec / 10;
+			tod->second2 = t->sec % 10;
+			tod->minute1 = t->min / 10;
+			tod->minute2 = t->min % 10;
+			tod->hour1   = t->hour / 10;
+			tod->hour2   = t->hour % 10;
+			tod->day1    = t->day / 10;
+			tod->day2    = t->day % 10;
+			if (t->wday != -1)
+				tod->weekday = t->wday;
+			tod->month1  = (t->mon + 1) / 10;
+			tod->month2  = (t->mon + 1) % 10;
+			if (t->year >= 100)
+				t->year -= 100;
+			tod->year1   = t->year / 10;
+			tod->year2   = t->year % 10;
+		}
+
+		tod->cntrl1 = TOD3000_CNTRL1_FREE;
+	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
+		volatile struct tod2000 *tod = TOD_2000;
+
+		tod->cntrl1 = TOD2000_CNTRL1_HOLD;
+	
+		while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
+			;
+
+		if (!op) { /* read */
+			t->sec  = tod->second1     * 10 + tod->second2;
+			t->min  = tod->minute1     * 10 + tod->minute2;
+			t->hour = (tod->hour1 & 3) * 10 + tod->hour2;
+			t->day  = tod->day1        * 10 + tod->day2;
+			t->wday = tod->weekday;
+			t->mon  = tod->month1      * 10 + tod->month2 - 1;
+			t->year = tod->year1       * 10 + tod->year2;
+			if (t->year <= 69)
+				t->year += 100;
+
+			if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
+				if (!(tod->hour1 & TOD2000_HOUR1_PM) && t->hour == 12)
+					t->hour = 0;
+				else if ((tod->hour1 & TOD2000_HOUR1_PM) && t->hour != 12)
+					t->hour += 12;
+			}
+		} else {
+			tod->second1 = t->sec / 10;
+			tod->second2 = t->sec % 10;
+			tod->minute1 = t->min / 10;
+			tod->minute2 = t->min % 10;
+			if (tod->cntrl3 & TOD2000_CNTRL3_24HMODE)
+				tod->hour1 = t->hour / 10;
+			else if (t->hour >= 12)
+				tod->hour1 = TOD2000_HOUR1_PM +
+					(t->hour - 12) / 10;
+			else
+				tod->hour1 = t->hour / 10;
+			tod->hour2   = t->hour % 10;
+			tod->day1    = t->day / 10;
+			tod->day2    = t->day % 10;
+			if (t->wday != -1)
+				tod->weekday = t->wday;
+			tod->month1  = (t->mon + 1) / 10;
+			tod->month2  = (t->mon + 1) % 10;
+			if (t->year >= 100)
+				t->year -= 100;
+			tod->year1   = t->year / 10;
+			tod->year2   = t->year % 10;
+		}
+
+		tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+	}
+
+	return 0;
+}
+
+static int amiga_set_clock_mmss (unsigned long nowtime)
+{
+	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+	if (AMIGAHW_PRESENT(A3000_CLK)) {
+		volatile struct tod3000 *tod = TOD_3000;
+
+		tod->cntrl1 = TOD3000_CNTRL1_HOLD;
+
+		tod->second1 = real_seconds / 10;
+		tod->second2 = real_seconds % 10;
+		tod->minute1 = real_minutes / 10;
+		tod->minute2 = real_minutes % 10;
+
+		tod->cntrl1 = TOD3000_CNTRL1_FREE;
+	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
+		volatile struct tod2000 *tod = TOD_2000;
+
+		tod->cntrl1 = TOD2000_CNTRL1_HOLD;
+	
+		while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
+			;
+
+		tod->second1 = real_seconds / 10;
+		tod->second2 = real_seconds % 10;
+		tod->minute1 = real_minutes / 10;
+		tod->minute2 = real_minutes % 10;
+
+		tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+	}
+
+	return 0;
+}
+
+static NORET_TYPE void amiga_reset( void )
+    ATTRIB_NORET;
+
+static void amiga_reset (void)
+{
+  for (;;);
+}
+
+
+    /*
+     *  Debugging
+     */
+
+#define SAVEKMSG_MAXMEM		128*1024
+
+#define SAVEKMSG_MAGIC1		0x53415645	/* 'SAVE' */
+#define SAVEKMSG_MAGIC2		0x4B4D5347	/* 'KMSG' */
+
+struct savekmsg {
+    unsigned long magic1;		/* SAVEKMSG_MAGIC1 */
+    unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
+    unsigned long magicptr;		/* address of magic1 */
+    unsigned long size;
+    char data[0];
+};
+
+static struct savekmsg *savekmsg = NULL;
+
+static void amiga_mem_console_write(struct console *co, const char *s,
+				    unsigned int count)
+{
+    if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
+        memcpy(savekmsg->data+savekmsg->size, s, count);
+        savekmsg->size += count;
+    }
+}
+
+static void amiga_savekmsg_init(void)
+{
+    static struct resource debug_res = { "Debug" };
+
+    savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
+    savekmsg->magic1 = SAVEKMSG_MAGIC1;
+    savekmsg->magic2 = SAVEKMSG_MAGIC2;
+    savekmsg->magicptr = virt_to_phys(savekmsg);
+    savekmsg->size = 0;
+}
+
+static void amiga_serial_putc(char c)
+{
+    custom.serdat = (unsigned char)c | 0x100;
+    mb();
+    while (!(custom.serdatr & 0x2000))
+       ;
+}
+
+void amiga_serial_console_write(struct console *co, const char *s,
+				       unsigned int count)
+{
+#if 0 /* def CONFIG_KGDB */
+	/* FIXME:APUS GDB doesn't seem to like O-packages before it is
+           properly connected with the target. */
+	__gdb_output_string (s, count);
+#else
+	while (count--) {
+		if (*s == '\n')
+			amiga_serial_putc('\r');
+		amiga_serial_putc(*s++);
+	}
+#endif
+}
+
+#ifdef CONFIG_SERIAL_CONSOLE
+void amiga_serial_puts(const char *s)
+{
+    amiga_serial_console_write(NULL, s, strlen(s));
+}
+
+int amiga_serial_console_wait_key(struct console *co)
+{
+    int ch;
+
+    while (!(custom.intreqr & IF_RBF))
+	barrier();
+    ch = custom.serdatr & 0xff;
+    /* clear the interrupt, so that another character can be read */
+    custom.intreq = IF_RBF;
+    return ch;
+}
+
+void amiga_serial_gets(struct console *co, char *s, int len)
+{
+    int ch, cnt = 0;
+
+    while (1) {
+	ch = amiga_serial_console_wait_key(co);
+
+	/* Check for backspace. */
+	if (ch == 8 || ch == 127) {
+	    if (cnt == 0) {
+		amiga_serial_putc('\007');
+		continue;
+	    }
+	    cnt--;
+	    amiga_serial_puts("\010 \010");
+	    continue;
+	}
+
+	/* Check for enter. */
+	if (ch == 10 || ch == 13)
+	    break;
+
+	/* See if line is too long. */
+	if (cnt >= len + 1) {
+	    amiga_serial_putc(7);
+	    cnt--;
+	    continue;
+	}
+
+	/* Store and echo character. */
+	s[cnt++] = ch;
+	amiga_serial_putc(ch);
+    }
+    /* Print enter. */
+    amiga_serial_puts("\r\n");
+    s[cnt] = 0;
+}
+#endif
+
+static void __init amiga_debug_init(void)
+{
+	if (!strcmp( m68k_debug_device, "ser" )) {
+		/* no initialization required (?) */
+		amiga_console_driver.write = amiga_serial_console_write;
+		register_console(&amiga_console_driver);
+	}
+}
+
+#ifdef CONFIG_HEARTBEAT
+static void amiga_heartbeat(int on)
+{
+    if (on)
+	ciaa.pra &= ~2;
+    else
+	ciaa.pra |= 2;
+}
+#endif
+
+    /*
+     *  Amiga specific parts of /proc
+     */
+
+static void amiga_get_model(char *model)
+{
+    strcpy(model, amiga_model_name);
+}
+
+
+static int amiga_get_hardware_list(char *buffer)
+{
+    int len = 0;
+
+    if (AMIGAHW_PRESENT(CHIP_RAM))
+	len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+    len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+		   amiga_psfreq, amiga_eclock);
+    if (AMIGAHW_PRESENT(AMI_VIDEO)) {
+	char *type;
+	switch(amiga_chipset) {
+	    case CS_OCS:
+		type = "OCS";
+		break;
+	    case CS_ECS:
+		type = "ECS";
+		break;
+	    case CS_AGA:
+		type = "AGA";
+		break;
+	    default:
+		type = "Old or Unknown";
+		break;
+	}
+	len += sprintf(buffer+len, "Graphics:\t%s\n", type);
+    }
+
+#define AMIGAHW_ANNOUNCE(name, str)			\
+    if (AMIGAHW_PRESENT(name))				\
+	len += sprintf (buffer+len, "\t%s\n", str)
+
+    len += sprintf (buffer + len, "Detected hardware:\n");
+
+    AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
+    AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
+    AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
+    AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
+    AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
+    AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
+    AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
+    AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
+    AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
+    AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
+    AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
+    AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
+    AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
+    AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
+    AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
+    AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
+    AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
+    AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
+    AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
+    AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
+    AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
+    AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
+    AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
+    AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
+    AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
+    AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
+    AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
+    AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
+    AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
+    if (AMIGAHW_PRESENT(ZORRO))
+	len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
+				   "Device%s\n",
+		       AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
+		       zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+
+#undef AMIGAHW_ANNOUNCE
+
+    return(len);
+}
+
+#ifdef CONFIG_APUS
+int get_hardware_list(char *buffer)
+{
+	extern int get_cpuinfo(char *buffer);
+	int len = 0;
+	char model[80];
+	u_long mem;
+	int i;
+
+	if (mach_get_model)
+		mach_get_model(model);
+	else
+		strcpy(model, "Unknown PowerPC");
+
+	len += sprintf(buffer+len, "Model:\t\t%s\n", model);
+	len += get_cpuinfo(buffer+len);
+	for (mem = 0, i = 0; i < m68k_realnum_memory; i++)
+		mem += m68k_memory[i].size;
+	len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10);
+
+	if (mach_get_hardware_list)
+		len += mach_get_hardware_list(buffer+len);
+
+	return(len);
+}
+#endif