Merge branch 'master' into upstream

19 files changed, 1451 insertions, 515 deletions

diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
new file mode 100644
index 00000000000..5f41c1f7a5f
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -0,0 +1,257 @@
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8540ADS";
+	compatible = "MPC85xxADS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8540@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8540@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <37 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 E0 0C 00 73 00 ];
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 E0 0C 00 73 01 ];
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "FEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			address = [ 00 E0 0C 00 73 02 ];
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <19 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x02 */
+				1000 0 0 1 40000 31 1
+				1000 0 0 2 40000 32 1
+				1000 0 0 3 40000 33 1
+				1000 0 0 4 40000 34 1
+
+				/* IDSEL 0x03 */
+				1800 0 0 1 40000 34 1
+				1800 0 0 2 40000 31 1
+				1800 0 0 3 40000 32 1
+				1800 0 0 4 40000 33 1
+
+				/* IDSEL 0x04 */
+				2000 0 0 1 40000 33 1
+				2000 0 0 2 40000 34 1
+				2000 0 0 3 40000 31 1
+				2000 0 0 4 40000 32 1
+
+				/* IDSEL 0x05 */
+				2800 0 0 1 40000 32 1
+				2800 0 0 2 40000 33 1
+				2800 0 0 3 40000 34 1
+				2800 0 0 4 40000 31 1
+
+				/* IDSEL 0x0c */
+				6000 0 0 1 40000 31 1
+				6000 0 0 2 40000 32 1
+				6000 0 0 3 40000 33 1
+				6000 0 0 4 40000 34 1
+
+				/* IDSEL 0x0d */
+				6800 0 0 1 40000 34 1
+				6800 0 0 2 40000 31 1
+				6800 0 0 3 40000 32 1
+				6800 0 0 4 40000 33 1
+
+				/* IDSEL 0x0e */
+				7000 0 0 1 40000 33 1
+				7000 0 0 2 40000 34 1
+				7000 0 0 3 40000 31 1
+				7000 0 0 4 40000 32 1
+
+				/* IDSEL 0x0f */
+				7800 0 0 1 40000 32 1
+				7800 0 0 2 40000 33 1
+				7800 0 0 3 40000 34 1
+				7800 0 0 4 40000 31 1
+
+				/* IDSEL 0x12 */
+				9000 0 0 1 40000 31 1
+				9000 0 0 2 40000 32 1
+				9000 0 0 3 40000 33 1
+				9000 0 0 4 40000 34 1
+
+				/* IDSEL 0x13 */
+				9800 0 0 1 40000 34 1
+				9800 0 0 2 40000 31 1
+				9800 0 0 3 40000 32 1
+				9800 0 0 4 40000 33 1
+
+				/* IDSEL 0x14 */
+				a000 0 0 1 40000 33 1
+				a000 0 0 2 40000 34 1
+				a000 0 0 3 40000 31 1
+				a000 0 0 4 40000 32 1
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 32 1
+				a800 0 0 2 40000 33 1
+				a800 0 0 3 40000 34 1
+				a800 0 0 4 40000 31 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
new file mode 100644
index 00000000000..7be0bc659e1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8541CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8541@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8541@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
new file mode 100644
index 00000000000..893d7957c17
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -0,0 +1,287 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 02 ];
+			interrupts = <f 2 10 2 11 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+/* eTSEC 4 is currently broken
+		ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <27000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 03 ];
+			interrupts = <15 2 16 2 17 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+ */
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
new file mode 100644
index 00000000000..118f5a88765
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8555CDS";
+	compatible = "MPC85xxCDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 08000000>;	// 128M at 0x0
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <35 0>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <0d 2 0e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			linux,phandle = <8000>;
+			interrupt-map-mask = <1f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x10 */
+				08000 0 0 1 40000 30 1
+				08000 0 0 2 40000 31 1
+				08000 0 0 3 40000 32 1
+				08000 0 0 4 40000 33 1
+
+				/* IDSEL 0x11 */
+				08800 0 0 1 40000 30 1
+				08800 0 0 2 40000 31 1
+				08800 0 0 3 40000 32 1
+				08800 0 0 4 40000 33 1
+
+				/* IDSEL 0x12 (Slot 1) */
+				09000 0 0 1 40000 30 1
+				09000 0 0 2 40000 31 1
+				09000 0 0 3 40000 32 1
+				09000 0 0 4 40000 33 1
+
+				/* IDSEL 0x13 (Slot 2) */
+				09800 0 0 1 40000 31 1
+				09800 0 0 2 40000 32 1
+				09800 0 0 3 40000 33 1
+				09800 0 0 4 40000 30 1
+
+				/* IDSEL 0x14 (Slot 3) */
+				0a000 0 0 1 40000 32 1
+				0a000 0 0 2 40000 33 1
+				0a000 0 0 3 40000 30 1
+				0a000 0 0 4 40000 31 1
+
+				/* IDSEL 0x15 (Slot 4) */
+				0a800 0 0 1 40000 33 1
+				0a800 0 0 2 40000 30 1
+				0a800 0 0 3 40000 31 1
+				0a800 0 0 4 40000 32 1
+
+				/* Bus 1 (Tundra Bridge) */
+				/* IDSEL 0x12 (ISA bridge) */
+				19000 0 0 1 40000 30 1
+				19000 0 0 2 40000 31 1
+				19000 0 0 3 40000 32 1
+				19000 0 0 4 40000 33 1>;
+			interrupt-parent = <40000>;
+			interrupts = <08 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+
+			i8259@19000 {
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <19000 0 0 0 1>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+				big-endian;
+				interrupts = <1>;
+				interrupt-parent = <8000>;
+			};
+		};
+
+		pci@9000 {
+			linux,phandle = <9000>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 40000 3b 1
+				a800 0 0 2 40000 3b 1
+				a800 0 0 3 40000 3b 1
+				a800 0 0 4 40000 3b 1>;
+			interrupt-parent = <40000>;
+			interrupts = <09 2>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			compatible = "85xx";
+			device_type = "pci";
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 359ab89748e..40a39291861 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -115,6 +115,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	u64 addr;
 	u32 *addrp;
 	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	struct device_node *tsi = of_get_parent(np);
 
 	/* We only support ports that have a clock frequency properly
 	 * encoded in the device-tree.
@@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	/* Add port, irq will be dealt with later. We passed a translated
 	 * IO port value. It will be fixed up later along with the irq
 	 */
-	return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+	if (tsi && !strcmp(tsi->type, "tsi-bridge"))
+		return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+	else
+		return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -464,7 +468,7 @@ static int __init serial_dev_init(void)
 			fixup_port_irq(i, np, port);
 		if (port->iotype == UPIO_PORT)
 			fixup_port_pio(i, np, port);
-		if (port->iotype == UPIO_MEM)
+		if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
 			fixup_port_mmio(i, np, port);
 	}
 
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 6a7e997c401..11052c212ad 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child)
 	return p;
 }
 
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
-	return (((pin - 1) + slot) % 4) + 1;
-}
-
 /* This doesn't need to be called if you don't have any special workaround
  * flags to pass
  */
@@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 }
 EXPORT_SYMBOL_GPL(of_irq_map_one);
 
+#ifdef CONFIG_PCI
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
 int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 {
 	struct device_node *dn, *ppnode;
@@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 	return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
 }
 EXPORT_SYMBOL_GPL(of_irq_map_pci);
-
+#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 774c0a3c501..18e59e43d2b 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void)
 /*
  * This version of gettimeofday has microsecond resolution.
  */
-static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
+static inline void __do_gettimeofday(struct timeval *tv)
 {
 	unsigned long sec, usec;
 	u64 tb_ticks, xsec;
@@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
 	 * without a divide (and in fact, without a multiply)
 	 */
 	temp_varp = do_gtod.varp;
-	tb_ticks = tb_val - temp_varp->tb_orig_stamp;
+
+	/* Sampling the time base must be done after loading
+	 * do_gtod.varp in order to avoid racing with update_gtod.
+	 */
+	data_barrier(temp_varp);
+	tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
 	temp_tb_to_xs = temp_varp->tb_to_xs;
 	temp_stamp_xsec = temp_varp->stamp_xsec;
 	xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
@@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv)
 		tv->tv_usec = usec;
 		return;
 	}
-	__do_gettimeofday(tv, get_tb());
+	__do_gettimeofday(tv);
 }
 
 EXPORT_SYMBOL(do_gettimeofday);
@@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs)
 	int next_dec;
 	int cpu = smp_processor_id();
 	unsigned long ticks;
+	u64 tb_next_jiffy;
 
 #ifdef CONFIG_PPC32
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
@@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs)
 			continue;
 
 		write_seqlock(&xtime_lock);
-		tb_last_jiffy += tb_ticks_per_jiffy;
-		tb_last_stamp = per_cpu(last_jiffy, cpu);
-		do_timer(regs);
-		timer_recalc_offset(tb_last_jiffy);
-		timer_check_rtc();
+		tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
+		if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
+			tb_last_jiffy = tb_next_jiffy;
+			tb_last_stamp = per_cpu(last_jiffy, cpu);
+			do_timer(regs);
+			timer_recalc_offset(tb_last_jiffy);
+			timer_check_rtc();
+		}
 		write_sequnlock(&xtime_lock);
 	}
 	
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index e4d1713e8ae..9b352bd0a46 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -585,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs)
 #define INST_MFSPR_PVR_MASK	0xfc1fffff
 
 #define INST_DCBA		0x7c0005ec
-#define INST_DCBA_MASK		0x7c0007fe
+#define INST_DCBA_MASK		0xfc0007fe
 
 #define INST_MCRXR		0x7c000400
-#define INST_MCRXR_MASK		0x7c0007fe
+#define INST_MCRXR_MASK		0xfc0007fe
 
 #define INST_STRING		0x7c00042a
-#define INST_STRING_MASK	0x7c0007fe
-#define INST_STRING_GEN_MASK	0x7c00067e
+#define INST_STRING_MASK	0xfc0007fe
+#define INST_STRING_GEN_MASK	0xfc00067e
 #define INST_LSWI		0x7c0004aa
 #define INST_LSWX		0x7c00042a
 #define INST_STSWI		0x7c0005aa
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 266b8b2ceac..5615acc2952 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
 	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
-						 HUGEPTE_TABLE_SIZE-1));
+						 PGF_CACHENUM_MASK));
 }
 
 #ifdef CONFIG_PPC_64K_PAGES
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 454fc53289a..c3268d9877e 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -14,7 +14,6 @@ config MPC8540_ADS
 config MPC85xx_CDS
 	bool "Freescale MPC85xx CDS"
 	select DEFAULT_UIMAGE
-	select PPC_I8259 if PCI
 	help
 	  This option enables support for the MPC85xx CDS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 06a497676c9..9d2acfbbecc 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -37,79 +37,7 @@ unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
 #endif
 
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-	0x0,			/* External  0: */
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 1: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 2: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 3: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 4: PCI slot 3 */
-#else
-	0x0,			/* External  1: */
-	0x0,			/* External  2: */
-	0x0,			/* External  3: */
-	0x0,			/* External  4: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PHY */
-	0x0,			/* External  6: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 7: PHY */
-	0x0,			/* External  8: */
-	0x0,			/* External  9: */
-	0x0,			/* External 10: */
-	0x0,			/* External 11: */
-};
-
 #ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     * This is little evil, but works around the fact
-	     * that revA boards have IDSEL starting at 18
-	     * and others boards (older) start at 12
-	     *
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *       A      B      C      D
-	     */
-	{
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 2 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 5 */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 12 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 15 */
-		{0, 0, 0, 0},	/* -- */
-		{0, 0, 0, 0},	/* -- */
-		{PIRQA, PIRQB, PIRQC, PIRQD},	/* IDSEL 18 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},
-		{PIRQC, PIRQD, PIRQA, PIRQB},
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 21 */
-	};
-
-	const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
 int
 mpc85xx_exclude_device(u_char bus, u_char devfn)
 {
@@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
 		return PCIBIOS_SUCCESSFUL;
 }
 
+void __init
+mpc85xx_pcibios_fixup(void)
+{
+	struct pci_dev *dev = NULL;
+
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
 #endif /* CONFIG_PCI */
 
 
 void __init mpc85xx_ads_pic_init(void)
 {
-	struct mpic *mpic1;
-	phys_addr_t OpenPIC_PAddr;
-
-	/* Determine the Physical Address of the OpenPIC regs */
-	OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
-
-	mpic1 = mpic_alloc(OpenPIC_PAddr,
-			   MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			   4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
-			   mpc85xx_ads_openpic_initsenses,
-			   sizeof(mpc85xx_ads_openpic_initsenses),
-			   " OpenPIC  ");
-	BUG_ON(mpic1 == NULL);
-	mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
-	mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
-	mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
-	mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
-	mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
-	mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
-	mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
-	mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
-	/* dummy mappings to get to 48 */
-	mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
-	mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
-	mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
-	mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
-	/* External ints */
-	mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
-	mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
-	mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-	mpic_init(mpic1);
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if(of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Could not map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			4, 0, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, r.start + 0x10200);
+	mpic_assign_isu(mpic, 1, r.start + 0x10280);
+	mpic_assign_isu(mpic, 2, r.start + 0x10300);
+	mpic_assign_isu(mpic, 3, r.start + 0x10380);
+	mpic_assign_isu(mpic, 4, r.start + 0x10400);
+	mpic_assign_isu(mpic, 5, r.start + 0x10480);
+	mpic_assign_isu(mpic, 6, r.start + 0x10500);
+	mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+	/* Unused on this platform (leave room for 8548) */
+	mpic_assign_isu(mpic, 8, r.start + 0x10600);
+	mpic_assign_isu(mpic, 9, r.start + 0x10680);
+	mpic_assign_isu(mpic, 10, r.start + 0x10700);
+	mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+	/* External Interrupts */
+	mpic_assign_isu(mpic, 12, r.start + 0x10000);
+	mpic_assign_isu(mpic, 13, r.start + 0x10080);
+	mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+	mpic_init(mpic);
 }
 
 /*
@@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void)
 static void __init mpc85xx_ads_setup_arch(void)
 {
 	struct device_node *cpu;
+#ifdef CONFIG_PCI
 	struct device_node *np;
+#endif
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
@@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
 
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc85xx_map_irq;
+	ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 18e6e11f702..1d357d32a29 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0;
 static int cds_pci_slot = 2;
 static volatile u8 *cadmus;
 
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
-	MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Ext 0: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 1: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 2: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext 3: PCI slot 3 */
-#else
-	0x0,				/* External  0: */
-	0x0,				/* External  1: */
-	0x0,				/* External  2: */
-	0x0,				/* External  3: */
-#endif
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 5: PHY */
-	0x0,				/* External  6: */
-	0x0,				/* External  7: */
-	0x0,				/* External  8: */
-	0x0,				/* External  9: */
-	0x0,				/* External 10: */
-#ifdef CONFIG_PCI
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),    /* Ext 11: PCI2 slot 0 */
-#else
-	0x0,				/* External 11: */
-#endif
-};
-
 
 #ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (!hose->index)
-	{
-		/* Handle PCI1 interrupts */
-		char pci_irq_table[][4] =
-			/*
-			 *      PCI IDSEL/INTPIN->INTLINE
-			 *        A      B      C      D
-			 */
-
-			/* Note IRQ assignment for slots is based on which slot the elysium is
-			 * in -- in this setup elysium is in slot #2 (this PIRQA as first
-			 * interrupt on slot */
-		{
-			{ 0, 1, 2, 3 }, /* 16 - PMC */
-			{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
-			{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
-			{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
-			{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
-			{ 3, 0, 1, 2 }, /* 21 - Slot 4 */
-		};
-
-		const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
-		int i, j;
-
-		for (i = 0; i < 6; i++)
-			for (j = 0; j < 4; j++)
-				pci_irq_table[i][j] =
-					((pci_irq_table[i][j] + 5 -
-					  cds_pci_slot) & 0x3) + PIRQ0A;
-
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		/* Handle PCI2 interrupts (if we have one) */
-		char pci_irq_table[][4] =
-		{
-			/*
-			 * We only have one slot and one interrupt
-			 * going to PIRQA - PIRQD */
-			{ PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
-		};
-
-		const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
 
 #define ARCADIA_HOST_BRIDGE_IDSEL	17
 #define ARCADIA_2ND_BRIDGE_IDSEL	3
@@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void)
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
 		pci_dev_put(dev);
 	}
+
+	/* Now map all the PCI irqs */
+	dev = NULL;
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
+
+#ifdef CONFIG_PPC_I8259
+#warning The i8259 PIC support is currently broken
+static void mpc85xx_8259_cascade(unsigned int irq, struct
+		irq_desc *desc, struct pt_regs *regs)
+{
+	unsigned int cascade_irq = i8259_irq(regs);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+
+	desc->chip->eoi(irq);
 }
+#endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
 void __init mpc85xx_cds_pic_init(void)
 {
-	struct mpic *mpic1;
-	phys_addr_t OpenPIC_PAddr;
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
 
-	/* Determine the Physical Address of the OpenPIC regs */
-	OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
 
-	mpic1 = mpic_alloc(OpenPIC_PAddr,
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
-			mpc85xx_cds_openpic_initsenses,
-			sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC  ");
-	BUG_ON(mpic1 == NULL);
-	mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
-	mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
-	mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
-	mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
-	mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
-	mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
-	mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
-	mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
-	/* dummy mappings to get to 48 */
-	mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
-	mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
-	mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
-	mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
-	/* External ints */
-	mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
-	mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
-	mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-
-	mpic_init(mpic1);
+			4, 0, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+
+	/* Return the mpic node */
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, r.start + 0x10200);
+	mpic_assign_isu(mpic, 1, r.start + 0x10280);
+	mpic_assign_isu(mpic, 2, r.start + 0x10300);
+	mpic_assign_isu(mpic, 3, r.start + 0x10380);
+	mpic_assign_isu(mpic, 4, r.start + 0x10400);
+	mpic_assign_isu(mpic, 5, r.start + 0x10480);
+	mpic_assign_isu(mpic, 6, r.start + 0x10500);
+	mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+	/* Used only for 8548 so far, but no harm in
+	 * allocating them for everyone */
+	mpic_assign_isu(mpic, 8, r.start + 0x10600);
+	mpic_assign_isu(mpic, 9, r.start + 0x10680);
+	mpic_assign_isu(mpic, 10, r.start + 0x10700);
+	mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+	/* External Interrupts */
+	mpic_assign_isu(mpic, 12, r.start + 0x10000);
+	mpic_assign_isu(mpic, 13, r.start + 0x10080);
+	mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize the i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
 
-#ifdef CONFIG_PCI
-	mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
 
-	i8259_init(0,0);
-#endif
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
+#endif /* CONFIG_PPC_I8259 */
 }
 
 
@@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void)
 		add_bridge(np);
 
 	ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc85xx_map_irq;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
index 5d2bcf78cef..41e554c4af9 100644
--- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
+++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
@@ -16,38 +16,6 @@
 
 #include <linux/init.h>
 
-/* PCI interrupt controller */
-#define PIRQA		3
-#define PIRQB		4
-#define PIRQC		5
-#define PIRQD		6
-#define PIRQ7		7
-#define PIRQE		9
-#define PIRQF		10
-#define PIRQG		11
-#define PIRQH		12
-
-/* PCI-Express memory map */
-#define MPC86XX_PCIE_LOWER_IO        0x00000000
-#define MPC86XX_PCIE_UPPER_IO        0x00ffffff
-
-#define MPC86XX_PCIE_LOWER_MEM       0x80000000
-#define MPC86XX_PCIE_UPPER_MEM       0x9fffffff
-
-#define MPC86XX_PCIE_IO_BASE         0xe2000000
-#define MPC86XX_PCIE_MEM_OFFSET      0x00000000
-
-#define MPC86XX_PCIE_IO_SIZE         0x01000000
-
-#define PCIE1_CFG_ADDR_OFFSET    (0x8000)
-#define PCIE1_CFG_DATA_OFFSET    (0x8004)
-
-#define PCIE2_CFG_ADDR_OFFSET    (0x9000)
-#define PCIE2_CFG_DATA_OFFSET    (0x9004)
-
-#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET
-#define MPC86xx_PCIE_SIZE	(0x1000)
-
 #define MPC86XX_RSTCR_OFFSET	(0xe00b0)	/* Reset Control Register */
 
 #endif	/* __MPC8641_HPCN_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index ebae73eb006..146da3001c6 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -37,6 +37,14 @@
 #include "mpc86xx.h"
 #include "mpc8641_hpcn.h"
 
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
@@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0;
 #endif
 
 
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- */
-
-static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  0: Reserved */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  1: MCM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  2: DDR DRAM */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  3: LBIU */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  4: DMA 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  5: DMA 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  6: DMA 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  7: DMA 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  8: PCIE1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal  9: PCIE2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 10: Reserved */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 11: Reserved */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 12: DUART2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 13: TSEC 1 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 14: TSEC 1 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 15: TSEC 3 transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 16: TSEC 3 receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 17: TSEC 3 error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 18: TSEC 1 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 19: TSEC 2 Transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 20: TSEC 2 Receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 21: TSEC 4 transmit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 22: TSEC 4 receive */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 23: TSEC 4 error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 24: TSEC 2 Receive/Transmit Error */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 25: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 26: DUART1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 27: I2C */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 28: Performance Monitor */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 29: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 30: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 31: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 32: SRIO error/write-port unit */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 33: SRIO outbound doorbell */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 34: SRIO inbound doorbell */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 35: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 36: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 37: SRIO outbound message unit 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 38: SRIO inbound message unit 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 39: SRIO outbound message unit 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 40: SRIO inbound message unit 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 41: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 42: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 43: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 44: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 45: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 46: Unused */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* Internal 47: Unused */
-	0x0,						/* External  0: */
-	0x0,						/* External  1: */
-	0x0,						/* External  2: */
-	0x0,						/* External  3: */
-	0x0,						/* External  4: */
-	0x0,						/* External  5: */
-	0x0,						/* External  6: */
-	0x0,						/* External  7: */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External  8: Pixis FPGA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* External  9: ULI 8259 INTR Cascade */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* External 10: Quad ETH PHY */
-	0x0,						/* External 11: */
-	0x0,
-	0x0,
-	0x0,
-	0x0,
-};
-
+static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc,
+				 struct pt_regs *regs)
+{
+	unsigned int cascade_irq = i8259_irq(regs);
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
+}
 
 void __init
 mpc86xx_hpcn_init_irq(void)
 {
 	struct mpic *mpic1;
+	struct device_node *np, *cascade_node = NULL;
+	int cascade_irq;
 	phys_addr_t openpic_paddr;
 
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+
 	/* Determine the Physical Address of the OpenPIC regs */
 	openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
 
 	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(openpic_paddr,
+	mpic1 = mpic_alloc(np, openpic_paddr,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250,
-			mpc86xx_hpcn_openpic_initsenses,
-			sizeof(mpc86xx_hpcn_openpic_initsenses),
+			16, NR_IRQS - 4,
 			" MPIC     ");
 	BUG_ON(mpic1 == NULL);
 
+	mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
+
 	/* 48 Internal Interrupts */
-	mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200);
-	mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400);
-	mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600);
+	mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
+	mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
+	mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
 
-	/* 16 External interrupts */
-	mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000);
+	/* 16 External interrupts
+	 * Moving them from [0 - 15] to [64 - 79]
+	 */
+	mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
 
 	mpic_init(mpic1);
 
 #ifdef CONFIG_PCI
-	mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL);
-	i8259_init(0, I8259_OFFSET);
-#endif
-}
+	/* Initialize i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
+		return;
+	}
 
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
+		return;
+	}
+	DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
 
+	i8259_init(cascade_node, 0);
+	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
+#endif
+}
 
 #ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
 
-int
-mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
+const unsigned char uli1575_irq_route_table[16] = {
+	0, 	/* 0: Reserved */
+	0x8, 	/* 1: 0b1000 */
+	0, 	/* 2: Reserved */
+	0x2,	/* 3: 0b0010 */
+	0x4,	/* 4: 0b0100 */
+	0x5, 	/* 5: 0b0101 */
+	0x7,	/* 6: 0b0111 */
+	0x6,	/* 7: 0b0110 */
+	0, 	/* 8: Reserved */
+	0x1,	/* 9: 0b0001 */
+	0x3,	/* 10: 0b0011 */
+	0x9,	/* 11: 0b1001 */
+	0xb,	/* 12: 0b1011 */
+	0, 	/* 13: Reserved */
+	0xd,	/* 14, 0b1101 */
+	0xf,	/* 15, 0b1111 */
+};
+
+static int __devinit
+get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
 {
-	static char pci_irq_table[][4] = {
-		/*
-		 *      PCI IDSEL/INTPIN->INTLINE
-		 *       A      B      C      D
-		 */
-		{PIRQA, PIRQB, PIRQC, PIRQD},   /* IDSEL 17 -- PCI Slot 1 */
-		{PIRQB, PIRQC, PIRQD, PIRQA},	/* IDSEL 18 -- PCI Slot 2 */
-		{0, 0, 0, 0},			/* IDSEL 19 */
-		{0, 0, 0, 0},			/* IDSEL 20 */
-		{0, 0, 0, 0},			/* IDSEL 21 */
-		{0, 0, 0, 0},			/* IDSEL 22 */
-		{0, 0, 0, 0},			/* IDSEL 23 */
-		{0, 0, 0, 0},			/* IDSEL 24 */
-		{0, 0, 0, 0},			/* IDSEL 25 */
-		{PIRQD, PIRQA, PIRQB, PIRQC},	/* IDSEL 26 -- PCI Bridge*/
-		{PIRQC, 0, 0, 0},		/* IDSEL 27 -- LAN */
-		{PIRQE, PIRQF, PIRQH, PIRQ7},	/* IDSEL 28 -- USB 1.1 */
-		{PIRQE, PIRQF, PIRQG, 0},	/* IDSEL 29 -- Audio & Modem */
-		{PIRQH, 0, 0, 0},		/* IDSEL 30 -- LPC & PMU*/
-		{PIRQD, 0, 0, 0},		/* IDSEL 31 -- ATA */
-	};
-
-	const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
+	struct of_irq oirq;
+	u32 laddr[3];
+	struct device_node *hosenode = hose ? hose->arch_data : NULL;
+
+	if (!hosenode) return -EINVAL;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, laddr, &oirq);
+	DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
+			laddr[0], slot, pin, oirq.specifier[0]);
+	return oirq.specifier[0];
 }
 
-static void __devinit quirk_ali1575(struct pci_dev *dev)
+static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	unsigned short temp;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned char irq2pin[16];
+	unsigned long pirq_map_word = 0;
+	u32 irq;
+	int i;
 
 	/*
-	 * ALI1575 interrupts route table setup:
+	 * ULI1575 interrupts route setup
+	 */
+	memset(irq2pin, 0, 16); /* Initialize default value 0 */
+
+	/*
+	 * PIRQA -> PIRQD mapping read from OF-tree
+	 *
+	 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+	 *                PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+	 */
+	for (i = 0; i < 4; i++){
+		irq = get_pci_irq_from_of(hose, 17, i + 1);
+		if (irq > 0 && irq < 16)
+			irq2pin[irq] = PIRQA + i;
+		else
+			printk(KERN_WARNING "ULI1575 device"
+			    "(slot %d, pin %d) irq %d is invalid.\n",
+			    17, i, irq);
+	}
+
+	/*
+	 * PIRQE -> PIRQF mapping set manually
 	 *
 	 * IRQ pin   IRQ#
-	 * PIRQA ---- 3
-	 * PIRQB ---- 4
-	 * PIRQC ---- 5
-	 * PIRQD ---- 6
 	 * PIRQE ---- 9
 	 * PIRQF ---- 10
 	 * PIRQG ---- 11
 	 * PIRQH ---- 12
-	 *
-	 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
-	 *                PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
 	 */
-	pci_write_config_dword(dev, 0x48, 0xb9317542);
+	for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
+
+	/* Set IRQ-PIRQ Mapping to ULI1575 */
+	for (i = 0; i < 16; i++)
+		if (irq2pin[i])
+			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
+				<< ((irq2pin[i] - PIRQA) * 4);
 
-	/* USB 1.1 OHCI controller 1, interrupt: PIRQE */
-	pci_write_config_byte(dev, 0x86, 0x0c);
+	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
+	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
+			pirq_map_word);
+	pci_write_config_dword(dev, 0x48, pirq_map_word);
 
-	/* USB 1.1 OHCI controller 2, interrupt: PIRQF */
-	pci_write_config_byte(dev, 0x87, 0x0d);
+#define ULI1575_SET_DEV_IRQ(slot, pin, reg) 				\
+	do { 								\
+		int irq; 						\
+		irq = get_pci_irq_from_of(hose, slot, pin); 		\
+		if (irq > 0 && irq < 16) 				\
+			pci_write_config_byte(dev, reg, irq2pin[irq]); 	\
+		else							\
+			printk(KERN_WARNING "ULI1575 device"		\
+			    "(slot %d, pin %d) irq %d is invalid.\n",	\
+			    slot, pin, irq);				\
+	} while(0)
 
-	/* USB 1.1 OHCI controller 3, interrupt: PIRQH */
-	pci_write_config_byte(dev, 0x88, 0x0f);
+	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
+	ULI1575_SET_DEV_IRQ(28, 1, 0x86);
 
-	/* USB 2.0 controller, interrupt: PIRQ7 */
-	pci_write_config_byte(dev, 0x74, 0x06);
+	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
+	ULI1575_SET_DEV_IRQ(28, 2, 0x87);
 
-	/* Audio controller, interrupt: PIRQE */
-	pci_write_config_byte(dev, 0x8a, 0x0c);
+	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
+	ULI1575_SET_DEV_IRQ(28, 3, 0x88);
 
-	/* Modem controller, interrupt: PIRQF */
-	pci_write_config_byte(dev, 0x8b, 0x0d);
+	/* USB 2.0 controller, slot 28, pin 4 */
+	irq = get_pci_irq_from_of(hose, 28, 4);
+	if (irq >= 0 && irq <=15)
+		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
 
-	/* HD audio controller, interrupt: PIRQG */
-	pci_write_config_byte(dev, 0x8c, 0x0e);
+	/* Audio controller, slot 29, pin 1 */
+	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
 
-	/* Serial ATA interrupt: PIRQD */
-	pci_write_config_byte(dev, 0x8d, 0x0b);
+	/* Modem controller, slot 29, pin 2 */
+	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
 
-	/* SMB interrupt: PIRQH */
-	pci_write_config_byte(dev, 0x8e, 0x0f);
+	/* HD audio controller, slot 29, pin 3 */
+	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
 
-	/* PMU ACPI SCI interrupt: PIRQH */
-	pci_write_config_byte(dev, 0x8f, 0x0f);
+	/* SMB interrupt: slot 30, pin 1 */
+	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
+
+	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
+	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
+
+	/* Serial ATA interrupt: slot 31, pin 1 */
+	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
 
 	/* Primary PATA IDE IRQ: 14
 	 * Secondary PATA IDE IRQ: 15
 	 */
-	pci_write_config_byte(dev, 0x44, 0x3d);
-	pci_write_config_byte(dev, 0x75, 0x0f);
+	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
+	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
 
 	/* Set IRQ14 and IRQ15 to legacy IRQs */
 	pci_read_config_word(dev, 0x46, &temp);
@@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev)
 	 */
 	outb(0xfa, 0x4d0);
 	outb(0x1e, 0x4d1);
+
+#undef ULI1575_SET_DEV_IRQ
 }
 
 static void __devinit quirk_uli5288(struct pci_dev *dev)
@@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev)
 	dev->class |= 0x1;
 }
 
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
@@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void)
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
 
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mpc86xx_map_irq;
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 #endif
 
@@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 }
 
 
+void __init mpc86xx_hpcn_pcibios_fixup(void)
+{
+	struct pci_dev *dev = NULL;
+
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
+
+
 /*
  * Called very early, device-tree isn't unflattened
  */
@@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) {
 	.setup_arch		= mpc86xx_hpcn_setup_arch,
 	.init_IRQ		= mpc86xx_hpcn_init_irq,
 	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
+	.pcibios_fixup		= mpc86xx_hpcn_pcibios_fixup,
 	.get_irq		= mpic_get_irq,
 	.restart		= mpc86xx_restart,
 	.time_init		= mpc86xx_time_init,
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d7a4fc7ca23..ed00ed2455d 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -1,7 +1,7 @@
 /*
  * mpc7448_hpc2.c
  *
- * Board setup routines for the Freescale Taiga platform
+ * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
  *
  * Author: Jacob Pan
  *	 jacob.pan@freescale.com
@@ -12,10 +12,10 @@
  *
  * Copyright 2004-2006 Freescale Semiconductor, Inc.
  *
- * This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
  */
 
 #include <linux/config.h>
@@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
 extern int tsi108_setup_pci(struct device_node *dev);
 extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 extern void tsi108_pci_int_init(void);
-extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * mpc7448hpc  manual.
- * Note:  Likely, this table and the following function should be
- *        obtained and derived from the OF Device Tree.
- */
-
-static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
-	/* External on-board sources */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[0] XINT0 from FPGA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[1] XINT1 from FPGA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[2] PHY_INT from both GIGE */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* INT[3] RESERVED */
-	/* Internal Tsi108/109 interrupt sources */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA0 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA1 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA2 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* DMA3 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* UART0 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* UART1 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* I2C */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* GPIO */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* GIGE0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* GIGE1 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* HLP */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* SDC */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Processor IF */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),	/* Reserved IRQ */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* PCI/X block */
-};
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+			    struct pt_regs *regs);
 
 int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
 {
@@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 {
 	struct mpic *mpic;
 	phys_addr_t mpic_paddr = 0;
+	unsigned int cascade_pci_irq;
+	struct device_node *tsi_pci;
 	struct device_node *tsi_pic;
 
 	tsi_pic = of_find_node_by_type(NULL, "open-pic");
@@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 	DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
 	    (u32) mpic_paddr);
 
-	mpic = mpic_alloc(mpic_paddr,
+	mpic = mpic_alloc(tsi_pic, mpic_paddr,
 			MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
 			MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
 			0, /* num_sources used */
-			TSI108_IRQ_BASE,
 			0, /* num_sources used */
-			NR_IRQS - 4 /* XXXX */,
-			mpc7448_hpc2_pic_initsenses,
-			sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+			"Tsi108_PIC");
 
 	BUG_ON(mpic == NULL); /* XXXX */
-
 	mpic_init(mpic);
-	mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+
+	tsi_pci = of_find_node_by_type(NULL, "pci");
+	if (tsi_pci == 0) {
+		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+		return;
+	}
+
+	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+	set_irq_data(cascade_pci_irq, mpic);
+	set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
 	tsi108_pci_int_init();
 
 	/* Configure MPIC outputs to CPU0 */
 	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+	of_node_put(tsi_pic);
 }
 
 void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
@@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
 	return 0;
 
 }
+
 define_machine(mpc7448_hpc2){
 	.name 			= "MPC7448 HPC2",
 	.probe 			= mpc7448_hpc2_probe,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 6a026c733f6..9d73d0234c5 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start)
 	DBG("End of boot params: %x\n", mem_end);
 	rsvmap[0] = mem_start;
 	rsvmap[1] = mem_end;
-	rsvmap[2] = 0;
-	rsvmap[3] = 0;
+	if (bootx_info->ramDisk) {
+		rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk;
+		rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize;
+		rsvmap[4] = 0;
+		rsvmap[5] = 0;
+	} else {
+		rsvmap[2] = 0;
+		rsvmap[3] = 0;
+	}
 
 	return (unsigned long)hdr;
 }
@@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 	 */
 	if (bi->version < 5) {
 		space = bi->deviceTreeOffset + bi->deviceTreeSize;
-		if (bi->ramDisk)
+		if (bi->ramDisk >= space)
 			space = bi->ramDisk + bi->ramDiskSize;
 	} else
 		space = bi->totalParamsSize;
 
-	bootx_printf("Total space used by parameters & ramdisk: %x \n", space);
+	bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
 
 	/* New BootX will have flushed all TLBs and enters kernel with
 	 * MMU switched OFF, so this should not be useful anymore.
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 12b65609c07..ef10bcf2d94 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void)
 			mdio_data.irq[k] = -1;
 
 		while ((child = of_get_next_child(np, child)) != NULL) {
-			if (child->n_intrs) {
-				u32 *id =
-				    (u32 *) get_property(child, "reg", NULL);
-				mdio_data.irq[*id] = child->intrs[0].line;
-			}
+			u32 *id = get_property(child, "reg", NULL);
+			mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
 		}
 
 		ret =
@@ -131,6 +128,7 @@ static int __init gfar_of_init(void)
 		char *model;
 		void *mac_addr;
 		phandle *ph;
+		int n_res = 1;
 
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
@@ -139,8 +137,7 @@ static int __init gfar_of_init(void)
 		if (ret)
 			goto err;
 
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
 
 		model = get_property(np, "model", NULL);
@@ -150,19 +147,19 @@ static int __init gfar_of_init(void)
 			r[1].name = gfar_tx_intr;
 
 			r[2].name = gfar_rx_intr;
-			r[2].start = np->intrs[1].line;
-			r[2].end = np->intrs[1].line;
+			r[2].start = r[2].end = irq_of_parse_and_map(np, 1);
 			r[2].flags = IORESOURCE_IRQ;
 
 			r[3].name = gfar_err_intr;
-			r[3].start = np->intrs[2].line;
-			r[3].end = np->intrs[2].line;
+			r[3].start = r[3].end = irq_of_parse_and_map(np, 2);
 			r[3].flags = IORESOURCE_IRQ;
+
+			n_res += 2;
 		}
 
 		gfar_dev =
 		    platform_device_register_simple("fsl-gianfar", i, &r[0],
-						    np->n_intrs + 1);
+						    n_res + 1);
 
 		if (IS_ERR(gfar_dev)) {
 			ret = PTR_ERR(gfar_dev);
@@ -259,8 +256,7 @@ static int __init fsl_i2c_of_init(void)
 		if (ret)
 			goto err;
 
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
 
 		i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
@@ -396,8 +392,7 @@ static int __init fsl_usb_of_init(void)
 		if (ret)
 			goto err;
 
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
 
 		usb_dev_mph =
@@ -445,8 +440,7 @@ static int __init fsl_usb_of_init(void)
 		if (ret)
 			goto unreg_mph;
 
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
 
 		usb_dev_dr =
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 26a0cc820cd..f3038461d4c 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void)
 			goto err;
 
 		r[1].name = "tx";
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = irq_of_parse_and_map(np, 0);
+		r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
+		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+			__FUNCTION__,r[1].name, r[1].start, r[1].end);
 
 		tsi_eth_dev =
 		    platform_device_register_simple("tsi-ethernet", i, &r[0],
-						    np->n_intrs + 1);
+						    1);
 
 		if (IS_ERR(tsi_eth_dev)) {
 			ret = PTR_ERR(tsi_eth_dev);
@@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void)
 		tsi_eth_data.regs = r[0].start;
 		tsi_eth_data.phyregs = res.start;
 		tsi_eth_data.phy = *phy_id;
-		tsi_eth_data.irq_num = np->intrs[0].line;
+		tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
 		of_node_put(phy);
 		ret =
 		    platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 3265d54c82e..2ab06ed3ae7 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -26,7 +26,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
-
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
 
 	(hose)->ops = &tsi108_direct_pci_ops;
 
-	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
 	       "Firmware bus number: %d->%d\n",
 	       rsrc.start, hose->first_busno, hose->last_busno);
 
@@ -278,7 +277,7 @@ static void init_pci_source(void)
 	mb();
 }
 
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
 {
 	u_int temp = 0;
 	int irq = -1;
@@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq)
  * Interrupt controller descriptor for cascaded PCI interrupt controller.
  */
 
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
 	.typename = "tsi108_PCI_int",
-	.enable = tsi108_pci_irq_enable,
-	.disable = tsi108_pci_irq_disable,
+	.mask = tsi108_pci_irq_disable,
 	.ack = tsi108_pci_irq_ack,
 	.end = tsi108_pci_irq_end,
+	.unmask = tsi108_pci_irq_enable,
 };
 
 /*
@@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void)
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
 	for (i = 0; i < NUM_PCI_IRQS; i++) {
-		irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+		irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
 		irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
 	}
 
 	init_pci_source();
 }
 
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+			    struct pt_regs *regs)
 {
-	return get_pci_source();
+	unsigned int cascade_irq = get_pci_source();
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
 }