Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
  powerpc/85xx: Fix signedness bug in cache-sram
  powerpc/fsl: 85xx: document cache sram bindings
  powerpc/fsl: define binding for fsl mpic interrupt controllers
  powerpc/fsl_msi: Handle msi-available-ranges better
  drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
  powerpc/85xx: Fix SPE float to integer conversion failure
  powerpc/85xx: Update sata controller compatible for p1022ds board
  ATA: Add FSL sata v2 controller support
  powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
  powerpc/8xx: remove obsolete mgsuvd board
  powerpc/82xx: rename and update mgcoge board support
  powerpc/83xx: rename and update kmeter1
  powerpc/85xx: Workaroudn e500 CPU erratum A005
  powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
  powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
  powerpc/pseries: Disable MSI using new interface if possible
  powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
  powerpc: core irq_data conversion.
  powerpc: sysdev/xilinx_intc irq_data conversion.
  powerpc: sysdev/uic irq_data conversion.
  ...

Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)

93 files changed, 2097 insertions, 1280 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 7d69e9bf5e6..71ba04721be 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -134,6 +134,7 @@ config PPC
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
 	select IRQ_PER_CPU
+	select GENERIC_HARDIRQS_NO_DEPRECATED
 
 config EARLY_PRINTK
 	bool
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 5b27a4b74b7..2779f08313a 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -172,6 +172,19 @@
 			interrupts = <0x1e 4>;
 		};
 
+		USBOTG0: usbotg@bff80000 {
+			compatible = "amcc,dwc-otg";
+			reg = <0x4 0xbff80000 0x10000>;
+			interrupt-parent = <&USBOTG0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x1 0x2>;
+			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
+		};
+
 		SATA0: sata@bffd1000 {
 			compatible = "amcc,sata-460ex";
 			reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
@@ -233,6 +246,11 @@
 					};
 				};
 
+				cpld@2,0 {
+					compatible = "amcc,ppc460ex-bcsr";
+					reg = <2 0x0 0x9>;
+				};
+
 				ndfc@3,0 {
 					compatible = "ibm,ndfc";
 					reg = <0x00000003 0x00000000 0x00002000>;
@@ -307,6 +325,12 @@
 				interrupts = <0x3 0x4>;
 			};
 
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				gpio-controller;
+			};
+
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460ex", "ibm,zmii";
 				reg = <0xef600d00 0x0000000c>;
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index d8b5d12fb66..d16bae1230f 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -1,7 +1,7 @@
 /*
  * Keymile KMETER1 Device Tree Source
  *
- * 2008 DENX Software Engineering GmbH
+ * 2008-2011 DENX Software Engineering GmbH
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -70,11 +70,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
-			compatible = "fsl-i2c";
+			compatible = "fsl,mpc8313-i2c","fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
-			dfsrr;
+			clock-frequency = <400000>;
 		};
 
 		serial0: serial@4500 {
@@ -137,6 +137,13 @@
 			compatible = "fsl,mpc8360-par_io";
 			num-ports = <7>;
 
+			qe_pio_c: gpio-controller@30 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8360-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x1430 0x18>;
+				gpio-controller;
+			};
 			pio_ucc1: ucc_pin@0 {
 				reg = <0>;
 
@@ -472,7 +479,17 @@
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				reg = <0x80 0x80>;
-				interrupts = <32 8 33 8>;
+				big-endian;
+				interrupts = <
+					32 0x8
+					33 0x8
+					34 0x8
+					35 0x8
+					40 0x8
+					41 0x8
+					42 0x8
+					43 0x8
+				>;
 				interrupt-parent = <&ipic>;
 			};
 		};
@@ -484,43 +501,31 @@
 		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
 			     "simple-bus";
 		reg = <0xe0005000 0xd8>;
-		ranges = <0 0 0xf0000000 0x04000000>;	/* Filled in by U-Boot */
+		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
+			  1 0 0xe8000000 0x01000000	/* LB 1 */
+			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
 
-		flash@f0000000,0 {
+		flash@0,0 {
 			compatible = "cfi-flash";
-			/*
-			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 separate regions
-			 * that are scanned by physmap_of independantly.
-			 */
-			reg = <0 0x00000000 0x02000000
-			       0 0x02000000 0x02000000>;	/* Filled in by U-Boot */
-			bank-width = <2>;
+			reg = <0 0 0x04000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			partition@0 {
+			bank-width = <2>;
+			partition@0 { /* 768KB */
 				label = "u-boot";
-				reg = <0 0x40000>;
+				reg = <0 0xC0000>;
 			};
-			partition@40000 {
+			partition@c0000 { /* 128KB */
 				label = "env";
-				reg = <0x40000 0x40000>;
-			};
-			partition@80000 {
-				label = "dtb";
-				reg = <0x80000 0x20000>;
-			};
-			partition@a0000 {
-				label = "kernel";
-				reg = <0xa0000 0x300000>;
+				reg = <0xC0000 0x20000>;
 			};
-			partition@3a0000 {
-				label = "ramdisk";
-				reg = <0x3a0000 0x800000>;
+			partition@e0000 { /* 128KB */
+				label = "envred";
+				reg = <0xE0000 0x20000>;
 			};
-			partition@ba0000 {
-				label = "user";
-				reg = <0xba0000 0x3460000>;
+			partition@100000 { /* 64512KB */
+				label = "ubi0";
+				reg = <0x100000 0x3F00000>;
 			};
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 0ce96644176..1360d2f6902 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -13,7 +13,7 @@
 /dts-v1/;
 / {
 	model = "MGCOGE";
-	compatible = "keymile,mgcoge";
+	compatible = "keymile,km82xx";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -48,8 +48,10 @@
 		reg = <0xf0010100 0x40>;
 
 		ranges = <0 0 0xfe000000 0x00400000
-			  5 0 0x50000000 0x20000000
-			>; /* Filled in by U-Boot */
+			  1 0 0x30000000 0x00010000
+			  2 0 0x40000000 0x00010000
+			  5 0 0x50000000 0x04000000
+			>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -60,36 +62,32 @@
 			device-width = <1>;
 			partition@0 {
 				label = "u-boot";
-				reg = <0 0x40000>;
+				reg = <0x00000 0xC0000>;
 			};
-			partition@40000 {
+			partition@1 {
 				label = "env";
-				reg = <0x40000 0x20000>;
+				reg = <0xC0000 0x20000>;
 			};
-			partition@60000 {
-				label = "kernel";
-				reg = <0x60000 0x220000>;
+			partition@2 {
+				label = "envred";
+				reg = <0xE0000 0x20000>;
 			};
-			partition@280000 {
-				label = "dtb";
-				reg = <0x280000 0x20000>;
+			partition@3 {
+				label = "free";
+				reg = <0x100000 0x300000>;
 			};
 		};
 
 		flash@5,0 {
 			compatible = "cfi-flash";
-			reg = <5 0x0 0x2000000>;
+			reg = <5 0x00000000 0x02000000
+			       5 0x02000000 0x02000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			bank-width = <2>;
-			device-width = <2>;
-			partition@0 {
-				label = "ramdisk";
-				reg = <0 0x7a0000>;
-			};
-			partition@7a0000 {
-				label = "user";
-				reg = <0x7a0000 0x1860000>;
+			partition@app { /* 64 MBytes */
+				label = "ubi0";
+				reg = <0x00000000 0x04000000>;
 			};
 		};
 	};
@@ -217,6 +215,13 @@
 			};
 		};
 
+		cpm2_pio_c: gpio-controller@10d40 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm2-pario-bank";
+			reg = <0x10d40 0x14>;
+			gpio-controller;
+		};
+
 		PIC: interrupt-controller@10c00 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/powerpc/boot/dts/mgsuvd.dts b/arch/powerpc/boot/dts/mgsuvd.dts
deleted file mode 100644
index e4fc53ab42b..00000000000
--- a/arch/powerpc/boot/dts/mgsuvd.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * MGSUVD Device Tree Source
- *
- * Copyright 2008 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	model = "MGSUVD";
-	compatible = "keymile,mgsuvd";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,852@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <16>;
-			i-cache-line-size = <16>;
-			d-cache-size = <8192>;
-			i-cache-size = <8192>;
-			timebase-frequency = <0>;	/* Filled in by u-boot */
-			bus-frequency = <0>;		/* Filled in by u-boot */
-			clock-frequency = <0>;		/* Filled in by u-boot */
-			interrupts = <15 2>;		/* decrementer interrupt */
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <00000000 0x4000000>;  /* Filled in by u-boot */
-	};
-
-	localbus@fff00100 {
-		compatible = "fsl,mp