Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (36 commits)
  powerpc/gc/wii: Remove get_irq_desc()
  powerpc/gc/wii: hlwd-pic: convert irq_desc.lock to raw_spinlock
  powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg
  powerpc/mpic: Fix problem that affinity is not updated
  powerpc/mm: Fix stupid bug in subpge protection handling
  powerpc/iseries: use DECLARE_COMPLETION_ONSTACK for non-constant completion
  powerpc: Fix MSI support on U4 bridge PCIe slot
  powerpc: Handle VSX alignment faults correctly in little-endian mode
  powerpc/mm: Fix typo of cpumask_clear_cpu()
  powerpc/mm: Fix hash_utils_64.c compile errors with DEBUG enabled.
  powerpc: Convert BUG() to use unreachable()
  powerpc/pseries: Make declarations of cpu_hotplug_driver_lock() ANSI compatible.
  powerpc/pseries: Don't panic when H_PROD fails during cpu-online.
  powerpc/mm: Fix a WARN_ON() with CONFIG_DEBUG_PAGEALLOC and CONFIG_DEBUG_VM
  powerpc/defconfigs: Set HZ=100 on pseries and ppc64 defconfigs
  powerpc/defconfigs: Disable token ring in powerpc defconfigs
  powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules
  powerpc/pseries: Select XICS and PCI_MSI PSERIES
  powerpc/85xx: Wrong variable returned on error
  powerpc/iseries: Convert to proc_fops
  ...

6 files changed, 102 insertions, 31 deletions

diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 971483f0dfa..1709ac5aac7 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -143,13 +143,23 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 	struct irq_desc *desc = irq_to_desc(virq);
 	unsigned int vold, vnew, edibit;
 
-	if (flow_type == IRQ_TYPE_NONE)
-		flow_type = IRQ_TYPE_LEVEL_LOW;
-
-	if (flow_type & IRQ_TYPE_EDGE_RISING) {
-		printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n",
-			flow_type);
-		return -EINVAL;
+	/* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or
+	 * IRQ_TYPE_EDGE_BOTH (default).  All others are IRQ_TYPE_EDGE_FALLING
+	 * or IRQ_TYPE_LEVEL_LOW (default)
+	 */
+	if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) {
+		if (flow_type == IRQ_TYPE_NONE)
+			flow_type = IRQ_TYPE_EDGE_BOTH;
+
+		if (flow_type != IRQ_TYPE_EDGE_BOTH &&
+		    flow_type != IRQ_TYPE_EDGE_FALLING)
+			goto err_sense;
+	} else {
+		if (flow_type == IRQ_TYPE_NONE)
+			flow_type = IRQ_TYPE_LEVEL_LOW;
+
+		if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+			goto err_sense;
 	}
 
 	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
@@ -181,6 +191,10 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 	if (vold != vnew)
 		out_be32(&cpm2_intctl->ic_siexr, vnew);
 	return 0;
+
+err_sense:
+	pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type);
+	return -EINVAL;
 }
 
 static struct irq_chip cpm2_pic = {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4e3a3e345ab..e1a028c1f18 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -464,8 +464,7 @@ static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct mpc83xx_pcie_priv *pcie = hose->dn->data;
-	u8 bus_no = bus->number - hose->first_busno;
-	u32 dev_base = bus_no << 24 | devfn << 16;
+	u32 dev_base = bus->number << 24 | devfn << 16;
 	int ret;
 
 	ret = mpc83xx_pcie_exclude_device(bus, devfn);
@@ -515,12 +514,17 @@ static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
 				     int offset, int len, u32 val)
 {
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	void __iomem *cfg_addr;
 
 	cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
 	if (!cfg_addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	/* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
+	if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
+		val &= 0xffffff00;
+
 	switch (len) {
 	case 1:
 		out_8(cfg_addr, val);
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 103eace3619..ee1c0e1cf4a 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -54,6 +54,22 @@ static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
 	mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
 }
 
+/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
+ * defined as output cannot be determined by reading GPDAT register,
+ * so we use shadow data register instead. The status of input pins
+ * is determined by reading GPDAT register.
+ */
+static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	u32 val;
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+
+	return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+}
+
 static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -136,7 +152,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 	gc->ngpio = MPC8XXX_GPIO_PINS;
 	gc->direction_input = mpc8xxx_gpio_dir_in;
 	gc->direction_output = mpc8xxx_gpio_dir_out;
-	gc->get = mpc8xxx_gpio_get;
+	if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
+		gc->get = mpc8572_gpio_get;
+	else
+		gc->get = mpc8xxx_gpio_get;
 	gc->set = mpc8xxx_gpio_set;
 
 	ret = of_mm_gpiochip_add(np, mm_gc);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index aa9d06e5925..470dc6c11d5 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -567,13 +567,11 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 #ifdef CONFIG_SMP
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(const cpumask_t *mask)
 {
-	cpumask_t mask;
 	int cpuid;
 
-	cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity);
-	if (cpus_equal(mask, CPU_MASK_ALL)) {
+	if (cpumask_equal(mask, cpu_all_mask)) {
 		static int irq_rover;
 		static DEFINE_SPINLOCK(irq_rover_lock);
 		unsigned long flags;
@@ -594,20 +592,15 @@ static int irq_choose_cpu(unsigned int virt_irq)
 
 		spin_unlock_irqrestore(&irq_rover_lock, flags);
 	} else {
-		cpumask_t tmp;
-
-		cpus_and(tmp, cpu_online_map, mask);
-
-		if (cpus_empty(tmp))
+		cpuid = cpumask_first_and(mask, cpu_online_mask);
+		if (cpuid >= nr_cpu_ids)
 			goto do_round_robin;
-
-		cpuid = first_cpu(tmp);
 	}
 
 	return get_hard_smp_processor_id(cpuid);
 }
 #else
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(const cpumask_t *mask)
 {
 	return hard_smp_processor_id();
 }
@@ -816,7 +809,7 @@ int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	unsigned int src = mpic_irq_to_hw(irq);
 
 	if (mpic->flags & MPIC_SINGLE_DEST_CPU) {
-		int cpuid = irq_choose_cpu(irq);
+		int cpuid = irq_choose_cpu(cpumask);
 
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
 	} else {
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index 1d44eee80fa..0f67cd79d48 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -39,7 +39,12 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 
 	pr_debug("mpic: found U3, guessing msi allocator setup\n");
 
-	/* Reserve source numbers we know are reserved in the HW */
+	/* Reserve source numbers we know are reserved in the HW.
+	 *
+	 * This is a bit of a mix of U3 and U4 reserves but that's going
+	 * to work fine, we have plenty enugh numbers left so let's just
+	 * mark anything we don't like reserved.
+	 */
 	for (i = 0;   i < 8;   i++)
 		msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
 
@@ -49,6 +54,10 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 	for (i = 100; i < 105; i++)
 		msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
 
+	for (i = 124; i < mpic->irq_count; i++)
+		msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i);
+
+
 	np = NULL;
 	while ((np = of_find_all_nodes(np))) {
 		pr_debug("mpic: mapping hwirqs for %s\n", np->full_name);
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index d3caf23e631..bcbfe79c704 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -64,12 +64,12 @@ static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos)
 	return addr;
 }
 
-static u64 find_ht_magic_addr(struct pci_dev *pdev)
+static u64 find_ht_magic_addr(struct pci_dev *pdev, unsigned int hwirq)
 {
 	struct pci_bus *bus;
 	unsigned int pos;
 
-	for (bus = pdev->bus; bus; bus = bus->parent) {
+	for (bus = pdev->bus; bus && bus->self; bus = bus->parent) {
 		pos = pci_find_ht_capability(bus->self, HT_CAPTYPE_MSI_MAPPING);
 		if (pos)
 			return read_ht_magic_addr(bus->self, pos);
@@ -78,13 +78,41 @@ static u64 find_ht_magic_addr(struct pci_dev *pdev)
 	return 0;
 }
 
+static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+
+	/* U4 PCIe MSIs need to write to the special register in
+	 * the bridge that generates interrupts. There should be
+	 * theorically a register at 0xf8005000 where you just write
+	 * the MSI number and that triggers the right interrupt, but
+	 * unfortunately, this is busted in HW, the bridge endian swaps
+	 * the value and hits the wrong nibble in the register.
+	 *
+	 * So instead we use another register set which is used normally
+	 * for converting HT interrupts to MPIC interrupts, which decodes
+	 * the interrupt number as part of the low address bits
+	 *
+	 * This will not work if we ever use more than one legacy MSI in
+	 * a block but we never do. For one MSI or multiple MSI-X where
+	 * each interrupt address can be specified separately, it works
+	 * just fine.
+	 */
+	if (of_device_is_compatible(hose->dn, "u4-pcie") ||
+	    of_device_is_compatible(hose->dn, "U4-pcie"))
+		return 0xf8004000 | (hwirq << 4);
+
+	return 0;
+}
+
 static int u3msi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
 {
 	if (type == PCI_CAP_ID_MSIX)
 		pr_debug("u3msi: MSI-X untested, trying anyway.\n");
 
 	/* If we can't find a magic address then MSI ain't gonna work */
-	if (find_ht_magic_addr(pdev) == 0) {
+	if (find_ht_magic_addr(pdev, 0) == 0 &&
+	    find_u4_magic_addr(pdev, 0) == 0) {
 		pr_debug("u3msi: no magic address found for %s\n",
 			 pci_name(pdev));
 		return -ENXIO;
@@ -118,10 +146,6 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	u64 addr;
 	int hwirq;
 
-	addr = find_ht_magic_addr(pdev);
-	msg.address_lo = addr & 0xFFFFFFFF;
-	msg.address_hi = addr >> 32;
-
 	list_for_each_entry(entry, &pdev->msi_list, list) {
 		hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1);
 		if (hwirq < 0) {
@@ -129,6 +153,12 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 			return hwirq;
 		}
 
+		addr = find_ht_magic_addr(pdev, hwirq);
+		if (addr == 0)
+			addr = find_u4_magic_addr(pdev, hwirq);
+		msg.address_lo = addr & 0xFFFFFFFF;
+		msg.address_hi = addr >> 32;
+
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
 		if (virq == NO_IRQ) {
 			pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq);
@@ -143,6 +173,8 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
 			  virq, hwirq, (unsigned long)addr);
 
+		printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
+			  virq, hwirq, (unsigned long)addr);
 		msg.data = hwirq;
 		write_msi_msg(virq, &msg);