gianfar: Convert gianfar to an of_platform_driver

Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 28 insertions, 213 deletions

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 26ecb96f973..115cb16351f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,236 +207,51 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int gfar_mdio_of_init_one(struct device_node *np)
-{
-	int k;
-	struct device_node *child = NULL;
-	struct gianfar_mdio_data mdio_data;
-	struct platform_device *mdio_dev;
-	struct resource res;
-	int ret;
-
-	memset(&res, 0, sizeof(res));
-	memset(&mdio_data, 0, sizeof(mdio_data));
-
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		return ret;
-
-	/* The gianfar device will try to use the same ID created below to find
-	 * this bus, to coordinate register access (since they share).  */
-	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
-			res.start&0xfffff, &res, 1);
-	if (IS_ERR(mdio_dev))
-		return PTR_ERR(mdio_dev);
-
-	for (k = 0; k < 32; k++)
-		mdio_data.irq[k] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		if (irq != NO_IRQ) {
-			const u32 *id = of_get_property(child, "reg", NULL);
-			mdio_data.irq[*id] = irq;
-		}
-	}
-
-	ret = platform_device_add_data(mdio_dev, &mdio_data,
-				sizeof(struct gianfar_mdio_data));
-	if (ret)
-		platform_device_unregister(mdio_dev);
-
-	return ret;
-}
-
-static int __init gfar_mdio_of_init(void)
-{
-	struct device_node *np = NULL;
-
-	for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
-		gfar_mdio_of_init_one(np);
-
-	/* try the deprecated version */
-	for_each_compatible_node(np, "mdio", "gianfar");
-		gfar_mdio_of_init_one(np);
-
-	return 0;
-}
-
-arch_initcall(gfar_mdio_of_init);
-
-static const char *gfar_tx_intr = "tx";
-static const char *gfar_rx_intr = "rx";
-static const char *gfar_err_intr = "error";
-
-static int __init gfar_of_init(void)
+#ifdef CONFIG_PPC_83xx
+static int __init mpc83xx_wdt_init(void)
 {
+	struct resource r;
 	struct device_node *np;
-	unsigned int i;
-	struct platform_device *gfar_dev;
-	struct resource res;
+	struct platform_device *dev;
+	u32 freq = fsl_get_sys_freq();
 	int ret;
 
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "network", "gianfar")) != NULL;
-	     i++) {
-		struct resource r[4];
-		struct device_node *phy, *mdio;
-		struct gianfar_platform_data gfar_data;
-		const unsigned int *id;
-		const char *model;
-		const char *ctype;
-		const void *mac_addr;
-		const phandle *ph;
-		int n_res = 2;
-
-		if (!of_device_is_available(np))
-			continue;
-
-		memset(r, 0, sizeof(r));
-		memset(&gfar_data, 0, sizeof(gfar_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		model = of_get_property(np, "model", NULL);
-
-		/* If we aren't the FEC we have multiple interrupts */
-		if (model && strcasecmp(model, "FEC")) {
-			r[1].name = gfar_tx_intr;
-
-			r[2].name = gfar_rx_intr;
-			of_irq_to_resource(np, 1, &r[2]);
+	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
 
-			r[3].name = gfar_err_intr;
-			of_irq_to_resource(np, 2, &r[3]);
-
-			n_res += 2;
-		}
-
-		gfar_dev =
-		    platform_device_register_simple("fsl-gianfar", i, &r[0],
-						    n_res);
-
-		if (IS_ERR(gfar_dev)) {
-			ret = PTR_ERR(gfar_dev);
-			goto err;
-		}
-
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			memcpy(gfar_data.mac_addr, mac_addr, 6);
-
-		if (model && !strcasecmp(model, "TSEC"))
-			gfar_data.device_flags =
-			    FSL_GIANFAR_DEV_HAS_GIGABIT |
-			    FSL_GIANFAR_DEV_HAS_COALESCE |
-			    FSL_GIANFAR_DEV_HAS_RMON |
-			    FSL_GIANFAR_DEV_HAS_MULTI_INTR;
-		if (model && !strcasecmp(model, "eTSEC"))
-			gfar_data.device_flags =
-			    FSL_GIANFAR_DEV_HAS_GIGABIT |
-			    FSL_GIANFAR_DEV_HAS_COALESCE |
-			    FSL_GIANFAR_DEV_HAS_RMON |
-			    FSL_GIANFAR_DEV_HAS_MULTI_INTR |
-			    FSL_GIANFAR_DEV_HAS_CSUM |
-			    FSL_GIANFAR_DEV_HAS_VLAN |
-			    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
-
-		ctype = of_get_property(np, "phy-connection-type", NULL);
-
-		/* We only care about rgmii-id.  The rest are autodetected */
-		if (ctype && !strcmp(ctype, "rgmii-id"))
-			gfar_data.interface = PHY_INTERFACE_MODE_RGMII_ID;
-		else
-			gfar_data.interface = PHY_INTERFACE_MODE_MII;
-
-		if (of_get_property(np, "fsl,magic-packet", NULL))
-			gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		if (ph == NULL) {
-			u32 *fixed_link;
-
-			fixed_link = (u32 *)of_get_property(np, "fixed-link",
-							   NULL);
-			if (!fixed_link) {
-				ret = -ENODEV;
-				goto unreg;
-			}
-
-			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
-			gfar_data.phy_id = fixed_link[0];
-		} else {
-			phy = of_find_node_by_phandle(*ph);
-
-			if (phy == NULL) {
-				ret = -ENODEV;
-				goto unreg;
-			}
-
-			mdio = of_get_parent(phy);
-
-			id = of_get_property(phy, "reg", NULL);
-			ret = of_address_to_resource(mdio, 0, &res);
-			if (ret) {
-				of_node_put(phy);
-				of_node_put(mdio);
-				goto unreg;
-			}
-
-			gfar_data.phy_id = *id;
-			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-				 (unsigned long long)res.start&0xfffff);
+	if (!np) {
+		ret = -ENODEV;
+		goto nodev;
+	}
 
-			of_node_put(phy);
-			of_node_put(mdio);
-		}
+	memset(&r, 0, sizeof(r));
 
-		/* Get MDIO bus controlled by this eTSEC, if any.  Normally only
-		 * eTSEC 1 will control an MDIO bus, not necessarily the same
-		 * bus that its PHY is on ('mdio' above), so we can't just use
-		 * that.  What we do is look for a gianfar mdio device that has
-		 * overlapping registers with this device.  That's really the
-		 * whole point, to find the device sharing our registers to
-		 * coordinate access with it.
-		 */
-		for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
-			if (of_address_to_resource(mdio, 0, &res))
-				continue;
-
-			if (res.start >= r[0].start && res.end <= r[0].end) {
-				/* Get the ID the mdio bus platform device was
-				 * registered with.  gfar_data.bus_id is
-				 * different because it's for finding a PHY,
-				 * while this is for finding a MII bus.
-				 */
-				gfar_data.mdio_bus = res.start&0xfffff;
-				of_node_put(mdio);
-				break;
-			}
-		}
+	ret = of_address_to_resource(np, 0, &r);
+	if (ret)
+		goto err;
 
-		ret =
-		    platform_device_add_data(gfar_dev, &gfar_data,
-					     sizeof(struct
-						    gianfar_platform_data));
-		if (ret)
-			goto unreg;
+	dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
+	if (IS_ERR(dev)) {
+		ret = PTR_ERR(dev);
+		goto err;
 	}
 
+	ret = platform_device_add_data(dev, &freq, sizeof(freq));
+	if (ret)
+		goto unreg;
+
+	of_node_put(np);
 	return 0;
 
 unreg:
-	platform_device_unregister(gfar_dev);
+	platform_device_unregister(dev);
 err:
+	of_node_put(np);
+nodev:
 	return ret;
 }
 
-arch_initcall(gfar_of_init);
+arch_initcall(mpc83xx_wdt_init);
+#endif
 
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {