powerpc/85xx: add cache-sram support

It adds cache-sram support in P1/P2 QorIQ platforms as under:

* A small abstraction over powerpc's remote heap allocator
* Exports mpc85xx_cache_sram_alloc()/free() APIs
* Supports only one contiguous SRAM window
* Drivers can do the following in Kconfig to use these APIs
    "select FSL_85XX_CACHE_SRAM if MPC85xx"
* Required SRAM size and the offset where SRAM should be mapped must be
  provided at kernel command line as :
    cache-sram-size=<value>
    cache-sram-offset=<offset>

Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 101 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
new file mode 100644
index 00000000000..60c9c0bd5ba
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_85xx_cache_ctlr.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc
+ *
+ * QorIQ based Cache Controller Memory Mapped Registers
+ *
+ * Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __FSL_85XX_CACHE_CTLR_H__
+#define __FSL_85XX_CACHE_CTLR_H__
+
+#define L2CR_L2FI		0x40000000	/* L2 flash invalidate */
+#define L2CR_L2IO		0x00200000	/* L2 instruction only */
+#define L2CR_SRAM_ZERO		0x00000000	/* L2SRAM zero size */
+#define L2CR_SRAM_FULL		0x00010000	/* L2SRAM full size */
+#define L2CR_SRAM_HALF		0x00020000	/* L2SRAM half size */
+#define L2CR_SRAM_TWO_HALFS	0x00030000	/* L2SRAM two half sizes */
+#define L2CR_SRAM_QUART		0x00040000	/* L2SRAM one quarter size */
+#define L2CR_SRAM_TWO_QUARTS	0x00050000	/* L2SRAM two quarter size */
+#define L2CR_SRAM_EIGHTH	0x00060000	/* L2SRAM one eighth size */
+#define L2CR_SRAM_TWO_EIGHTH	0x00070000	/* L2SRAM two eighth size */
+
+#define L2SRAM_OPTIMAL_SZ_SHIFT	0x00000003	/* Optimum size for L2SRAM */
+
+#define L2SRAM_BAR_MSK_LO18	0xFFFFC000	/* Lower 18 bits */
+#define L2SRAM_BARE_MSK_HI4	0x0000000F	/* Upper 4 bits */
+
+enum cache_sram_lock_ways {
+	LOCK_WAYS_ZERO,
+	LOCK_WAYS_EIGHTH,
+	LOCK_WAYS_TWO_EIGHTH,
+	LOCK_WAYS_HALF = 4,
+	LOCK_WAYS_FULL = 8,
+};
+
+struct mpc85xx_l2ctlr {
+	u32	ctl;		/* 0x000 - L2 control */
+	u8	res1[0xC];
+	u32	ewar0;		/* 0x010 - External write address 0 */
+	u32	ewarea0;	/* 0x014 - External write address extended 0 */
+	u32	ewcr0;		/* 0x018 - External write ctrl */
+	u8	res2[4];
+	u32	ewar1;		/* 0x020 - External write address 1 */
+	u32	ewarea1;	/* 0x024 - External write address extended 1 */
+	u32	ewcr1;		/* 0x028 - External write ctrl 1 */
+	u8	res3[4];
+	u32	ewar2;		/* 0x030 - External write address 2 */
+	u32	ewarea2;	/* 0x034 - External write address extended 2 */
+	u32	ewcr2;		/* 0x038 - External write ctrl 2 */
+	u8	res4[4];
+	u32	ewar3;		/* 0x040 - External write address 3 */
+	u32	ewarea3;	/* 0x044 - External write address extended 3 */
+	u32	ewcr3;		/* 0x048 - External write ctrl 3 */
+	u8	res5[0xB4];
+	u32	srbar0;		/* 0x100 - SRAM base address 0 */
+	u32	srbarea0;	/* 0x104 - SRAM base addr reg ext address 0 */
+	u32	srbar1;		/* 0x108 - SRAM base address 1 */
+	u32	srbarea1;	/* 0x10C - SRAM base addr reg ext address 1 */
+	u8	res6[0xCF0];
+	u32	errinjhi;	/* 0xE00 - Error injection mask high */
+	u32	errinjlo;	/* 0xE04 - Error injection mask low */
+	u32	errinjctl;	/* 0xE08 - Error injection tag/ecc control */
+	u8	res7[0x14];
+	u32	captdatahi;	/* 0xE20 - Error data high capture */
+	u32	captdatalo;	/* 0xE24 - Error data low capture */
+	u32	captecc;	/* 0xE28 - Error syndrome */
+	u8	res8[0x14];
+	u32	errdet;		/* 0xE40 - Error detect */
+	u32	errdis;		/* 0xE44 - Error disable */
+	u32	errinten;	/* 0xE48 - Error interrupt enable */
+	u32	errattr;	/* 0xE4c - Error attribute capture */
+	u32	erradrrl;	/* 0xE50 - Error address capture low */
+	u32	erradrrh;	/* 0xE54 - Error address capture high */
+	u32	errctl;		/* 0xE58 - Error control */
+	u8	res9[0x1A4];
+};
+
+struct sram_parameters {
+	unsigned int sram_size;
+	uint64_t sram_offset;
+};
+
+extern int instantiate_cache_sram(struct platform_device *dev,
+		struct sram_parameters sram_params);
+extern void remove_cache_sram(struct platform_device *dev);
+
+#endif /* __FSL_85XX_CACHE_CTLR_H__ */